Search

Winter wheat is one of the most important crops in the world. It is great significance to obtain the planting area of winter wheat timely and accurately for formulating agricultural policies. Due to the limited resolution of single SAR data and the susceptibility of single optical data to weather conditions, it is difficult to accurately obtain the planting area of winter wheat using only SAR or optical data. To solve the problem of low accuracy of winter wheat extraction only using optical or SAR images, a decision tree classification method combining time series SAR backscattering feature and NDVI (Normalized Difference Vegetation Index) was constructed in this paper. By synergy using of SAR and optical data can compensate for their respective shortcomings. First, winter wheat was distinguished from other vegetation by NDVI at the maturity stage, and then it was extracted by SAR backscattering feature. This approach facilitates the semi-automated extraction of winter wheat. Taking Yucheng City of Shandong Province as study area, 9 Sentinel-1 images and one Sentinel-2 image were taken as the data sources, and the spatial distribution of winter wheat in 2022 was obtained. The results indicate that the overall accuracy (OA) and kappa coefficient (Kappa) of the proposed method are 96.10% and 0.94, respectively. Compared with the supervised classification of multi-temporal composite pseudocolor image and single Sentinel-2 image using Support Vector Machine (SVM) classifier, the OA are improved by 10.69% and 5.66%, respectively. Compared with using only SAR feature for decision tree classification, the producer accuracy (PA) and user accuracy (UA) for extracting the winter wheat are improved by 3.08% and 8.25%, respectively. The method proposed in this paper is rapid and accurate, and provide a new technical method for extracting winter wheat. [ABSTRACT FROM AUTHOR]

Background: The cloud-penetrating and fog-penetrating capability of Synthetic Aperture Radar (SAR) give it the potential for application in forest fire progress monitoring; however, the low extraction accuracy and significant salt-and-pepper noise in SAR remote sensing mapping of the burned area are problems. Aims: This paper provides a method for accurately extracting the burned area based on fully exploiting the changes in multiple different dimensional feature parameters of dual-polarised SAR images before and after a fire. Methods: This paper describes forest fire progress monitoring using dual-polarisation SAR images combined with multi-scale segmentation and unsupervised classification. We first constructed polarisation feature and texture feature datasets using multi-scene Sentinel-1 images. A multi-scale segmentation algorithm was then used to generate objects to suppress the salt-and-pepper noise, followed by an unsupervised classification method to extract the burned area. Key results: The accuracy of burned area extraction in this paper is 91.67%, an improvement of 33.70% compared to the pixel-based classification results. Conclusions: Compared with the pixel-based method, our method effectively suppresses the salt-and-pepper noise and improves the SAR burned area extraction accuracy. Implications: The fire monitoring method using SAR images provides a reference for extracting the burned area under continuous cloud or smoke cover. This paper describes a method to monitor forest fire progress using dual-polarisation Synthetic Aperture Radar (SAR) images combined with multi-scale segmentation and unsupervised classification. We aimed to take full advantage of the many different dimensions of feature parameter changes caused by forest fires, relying on time-series dual-polarised SAR imagery to achieve burned area extraction and forest fire progress monitoring. [ABSTRACT FROM AUTHOR]

Crop classification plays a pivotal role in agricultural remote sensing, offering critical insights into planting areas, growth monitoring, and yield evaluation. Leveraging the power of Google Earth Engine, this paper centers on the agricultural landscape of Krishna District as its study region. It explores the efficacy of multiple machine learning approaches, specifically Random Forest (RF), Classification and Regression Tree (CART), Naive Bayes, and Support Vector Machine (SVM), in composition of Sentinel-1 and Sentinel-2 satellite imagery for crop categorization. By meticulously assessing and contrasting the evaluations of these four classification methods, the results highlight the efficacy of RF. The overall accuracy (OA) regarding RF classification reaches 0.86, surpassing the results obtained by Naive Bayes (OA = 0.68), CART (OA = 0.63), and SVM (OA = 0.78). This scalable and straightforward classification methodology harnesses the advantages of cloud-based platforms for data handling and analysis. The timely and precise identification in crop typing holds immense importance for monitoring alterations in harvest patterns, estimating yields, and issuing crop safety alerts in the Krishna District and beyond. This paper contributes to the agricultural geospatial sensing domain by providing an innovative approach for accurate crop classification, with broad applications in precision farming and crop management. [ABSTRACT FROM AUTHOR]

The amount of actively cultivated land in China is increasingly threatened by rapid urbanization and rural population aging. Quantifying the extent and changes of active cropland and cropping intensity is crucial to global food security. However, national-scale datasets for smallholder agriculture are limited in spatiotemporal continuity, resolution, and precision. In this paper, we present updated annual Cropland Use Intensity maps in China (China-CUI10m) with descriptions of the extent of fallow/abandoned, actively cropped fields and cropping intensity at a 10-m resolution in recent six years (2018–2023). The dataset is produced by robust algorithms with no requirements for regional adjustments or intensive training samples, which take full advantage of the Sentinel-1 (S1) SAR and Sentinel-2 (S2) MSI time series. The China-CUI10m maps have achieved high accuracy when compared to ground truth data (Overall accuracy = 90.88%) and statistical data (R2 > 0.94). This paper provides the recent trends in cropland abandonment and agricultural intensification in China, which contributes to facilitating geographic-targeted cropland use control policies towards sustainable intensification of smallholder agricultural systems in developing countries. [ABSTRACT FROM AUTHOR]

Recent advancements in deep learning have spurred the development of numerous novel semantic segmentation models for land cover mapping, showcasing exceptional performance in delineating precise boundaries and producing highly accurate land cover maps. However, to date, no systematic literature review has comprehensively examined semantic segmentation models in the context of land cover mapping. This paper addresses this gap by synthesizing recent advancements in semantic segmentation models for land cover mapping from 2017 to 2023, drawing insights on trends, data sources, model structures, and performance metrics based on a review of 106 articles. Our analysis identifies top journals in the field, including MDPI Remote Sensing, IEEE Journal of Selected Topics in Earth Science, and IEEE Transactions on Geoscience and Remote Sensing, IEEE Geoscience and Remote Sensing Letters, and ISPRS Journal Of Photogrammetry And Remote Sensing. We find that research predominantly focuses on land cover, urban areas, precision agriculture, environment, coastal areas, and forests. Geographically, 35.29% of the study areas are located in China, followed by the USA (11.76%), France (5.88%), Spain (4%), and others. Sentinel-2, Sentinel-1, and Landsat satellites emerge as the most used data sources. Benchmark datasets such as ISPRS Vaihingen and Potsdam, LandCover.ai, DeepGlobe, and GID datasets are frequently employed. Model architectures predominantly utilize encoder–decoder and hybrid convolutional neural network-based structures because of their impressive performances, with limited adoption of transformer-based architectures due to its computational complexity issue and slow convergence speed. Lastly, this paper highlights existing key research gaps in the field to guide future research directions. [ABSTRACT FROM AUTHOR]

This paper is intended to summarize the research conducted during the first 2 years of the Dragon 5 project 59,332 (geophysical and atmospheric retrieval from Synthetic Aperture Radar (SAR) data stacks over natural scenarios). Monitoring atmospheric phenomena, encompassing both tropospheric and ionospheric conditions, holds pivotal significance for various scientific and practical applications. In this paper, we present an exploration of advanced techniques for estimating tropospheric and ionospheric phase screens using stacks of Synthetic Aperture Radar (SAR) images. Our study delves into the current state-of-the-art in atmospheric monitoring with a focus on spaceborne SAR systems, shedding light on their evolving capabilities. For tropospheric phase screen estimation, we propose a novel approach that jointly estimates the tropospheric component from all the images. We discuss the methodology in detail, highlighting its ability to recover accurate tropospheric maps. Through a series of quantitative case studies using real Sentinel-1 satellite data, we demonstrate the effectiveness of our technique in capturing tropospheric variability over different geographical regions. Concurrently, we delve into the estimation of ionospheric phase screens utilizing SAR image stacks. The intricacies of ionospheric disturbances pose unique challenges, necessitating specialized techniques. We dissect our approach, showcasing its capacity to mitigate ionospheric noise and recover precise phase information. Real data from the Sentinel-1 satellite are employed to showcase the efficacy of our method, unraveling ionospheric perturbations with improved accuracy. The integration of our techniques, though presented separately for clarity, collectively contributes to a comprehensive framework for atmospheric monitoring. Our findings emphasize the potential of SAR-based approaches in advancing our knowledge of atmospheric processes, thus fostering advancements in weather prediction, geophysics, and environmental management. [ABSTRACT FROM AUTHOR]

Sichuan-Tibet Railway spans several watersheds such as Jinsha River and Yalong River, and Potential landslides are frequent along the route, which poses serious hazards to the normal construction and operation of the railroad. The traditional time-series InSAR technology is limited by the number of images and other restrictions, and has a long solution time, making it difficult to obtain information on short-term occurrence of deformation and unable to perform wide-area potential landslides monitor quickly. In this paper, taking a geological hazard-prone area in the Jinsha River basin (or a section of the Sichuan-Tibet line) as an example, based on the Sentinel-1 satellite SAR data provided by the Copernicus program of ESA, the model corrects the interferometric superposition deformation results obtained from a small number of SAR images (less than 7), decodes the corrected rate results, and identifies a total of 13 areas where deformation obviously occurs A total of 13 typical areas with significant deformation were identified. The identified typical areas were time-series solved and their deformation was traced. The method provides a new idea for identification and monitor of Potential landslides in a wide area and further promotes the development of disaster prevention and mitigation. [ABSTRACT FROM AUTHOR]

The objects presented in synthetic-aperture radar (SAR) images are the products of the joint actions of ground objects and SAR sensors in specific geospatial contexts. With the accumulation of massive time-domain SAR data, scholars have the opportunity to better understand ground-object targets and sensor systems, providing some useful feedback for SAR-data processing. Aiming at normalized and low-cost SAR radiometric monitoring, this paper proposes a new hyper-pixel concept for handling multi-pixel ensembles of semantic ground targets. The special hyper-pixel in this study refers to low-rise single-family residential areas, and its radiation reference is highly stable in the time domain when the other dimensions are fixed. The stability of its radiometric data can reach the level of 0.3 dB (1 σ), as verified by the multi-temporal data from Sentinel-1. A comparison with tropical-rainforest data verified its availability for SAR radiometric monitoring, and possible radiation variations and radiation-intensity shifts in the Sentinel-1B SAR products ere experimentally monitored. In this paper, the effects of seasonal climate and of the relative geometrical states observed on the intensity of the hyper-pixel's radiation are investigated. This paper proposes a novel hyper-pixel concept for processing and interpreting SAR-image data. The proposed residential hyper-pixel is shown to be useful in multi-temporal-data observations for normalized radiometric monitoring and has the potential to be used for cross-calibration, in addition to other applications. [ABSTRACT FROM AUTHOR]

Rice is a staple food that feeds nearly half of the world's population. With the population of our planet expected to keep growing, it is crucial to carry out accurate mapping, monitoring, and assessments since these could significantly impact food security, climate change, spatial planning, and land management. Using the PRISMA systematic review protocol, this article identified and selected 122 scientific articles (journals papers and conference proceedings) addressing different remote sensing-based methodologies to map paddy croplands, published between 2010 and October 2022. This analysis includes full coverage of the mapping of rice paddies and their various stages of crop maturity. This review paper classifies the methods based on the data source: (a) multispectral (62%), (b) multisource (20%), and (c) radar (18%). Furthermore, it analyses the impact of machine learning on those methodologies and the most common algorithms used. We found that MODIS (28%), Sentinel-2 (18%), Sentinel-1 (15%), and Landsat-8 (11%) were the most used sensors. The impact of Sentinel-1 on multisource solutions is also increasing due to the potential of backscatter information to determine textures in different stages and decrease cloud cover constraints. The preferred solutions include phenology algorithms via the use of vegetation indices, setting thresholds, or applying machine learning algorithms to classify images. In terms of machine learning algorithms, random forest is the most used (17 times), followed by support vector machine (12 times) and isodata (7 times). With the continuous development of technology and computing, it is expected that solutions such as multisource solutions will emerge more frequently and cover larger areas in different locations and at a higher resolution. In addition, the continuous improvement of cloud detection algorithms will positively impact multispectral solutions. [ABSTRACT FROM AUTHOR]

Landslides are a common geological disaster, which cause many economic losses and casualties in the world each year. Drawing up a landslide list and monitoring their deformations is crucial to prevent landslide disasters. Interferometric synthetic aperture radar (InSAR) can obtain millimeter-level surface deformations and provide data support for landslide deformation monitoring. However, some landslides are difficult to detect due to the low-coherence caused by vegetation cover in mountainous areas and the difficulty of phase unwrapping caused by large landslide deformations. In this paper, a method based on multi-direction phase gradient stacking is proposed. It employs the differential interferograms of small baseline sets to directly obtain the abnormal region, thereby avoiding the problem where part of landslide cannot be detected due to a phase unwrapping error. In this study, the Sentinel-1 satellite ascending and descending data from 2018 to 2020 are used to detect landslides around Zhouqu County, China. A total of 26 active landslides were detected in ascending data and 32 active landslides in the descending data using the method in this paper, while the SBAS-InSAR detected 19 active landslides in the ascending data and 25 active landslides in the descending data. The method in this paper can successfully detect landslides in areas that are difficult for the SBAS-InSAR to detect. In addition, the proposed method does not require phase unwrapping, so a significant amount of data processing time can be saved. [ABSTRACT FROM AUTHOR]

Landslides are one of the most dangerous natural disasters, which have affected national economic development and social stability. This paper proposes a method to indirectly monitor the deformation characteristics of landslides by extracting the abnormal vegetation information, especially for the inaccessible high-mountain landslides in southwestern China. This paper extracts the vegetation anomaly information in the Jizong Shed-Tunnel landslide which is located on the main traffic road to Tibet by the optical remote sensing Gaofen-1 (GF-1) data, and analyzes the temporal and spatial characteristics of the vegetation anomaly information through a time series. Then, we use the small baseline subsets interferometry synthetic aperture radar (SBAS-InSAR) technology to process Sentinel-1 data to obtain the time-series surface deformation information. Finally, we analyze and verify the results of the two methods. The results show that there is obvious vegetation coverage (VC) decline, with a maximum increasing percentage of 8.77% for the low and medium VC, and obvious surface deformation around the landslide, with the highest settlement rate of between 0 mm/year and 30 mm/year. Through the time-series analysis, we find that the change trends of the two methods are basically the same. This paper shows that the method of using abnormal vegetation information to monitor the Jizong Shed-Tunnel landslide has a certain degree of reliability and practicability. It can provide a new idea and effective supplement for landslide monitoring. [ABSTRACT FROM AUTHOR]

Human settlement areas significantly impact the environment, leading to changes in both natural and built environments. Comprehensive information on human settlements, particularly in urban areas, is crucial for effective sustainable development planning. However, urban land use investigations are often limited to two-dimensional building footprint maps, neglecting the three-dimensional aspect of building structures. This paper addresses this issue to contribute to Sustainable Development Goal 11, which focuses on making human settlements inclusive, safe, and sustainable. In this study, Sentinel-1 data are used as the primary source to estimate building heights. One challenge addressed is the issue of multiple backscattering in Sentinel-1's signal, particularly in densely populated areas with high-rise buildings. To mitigate this, firstly, Sentinel-1 data from different directions, orbit paths, and polarizations are utilized. Combining ascending and descending orbits significantly improves estimation accuracy, and incorporating a higher number of paths provides additional information. However, Sentinel-1 data alone are not sufficiently rich at a global scale across different orbits and polarizations. Secondly, to enhance the accuracy further, Sentinel-1 data are corrected using nighttime light data as additional information, which shows promising results in addressing multiple backscattering issues. Finally, a deep learning model is trained to generate building height maps using these features, achieving a mean absolute error of around 2 m and a mean square error of approximately 13. The generalizability of this method is demonstrated in several cities with diverse built-up structures, including London, Berlin, and others. Finally, a building height map of Iran is generated and evaluated against surveyed buildings, showcasing its large-scale mapping capability. [ABSTRACT FROM AUTHOR]

Synthetic Aperture Radar (SAR) is an active microwave sensor with all-day/night and all-weather detection capability, which is crucial for detecting surface water resources. Surface water-body such as rivers, lakes, reservoirs, and ponds usually appear as dark areas in SAR images. Accurate and automated extraction of these water bodies can provide valuable data for the management and strategic planning of surface water resources and effectively help prevent and control drought and flood disasters. However, most deep learning-based methods rely on manually labeled samples for model training and testing, which is inefficient and may introduce errors. To address this problem, this paper proposes a novel water-body detection method that combines optimization algorithms and deep learning techniques to automate water-body label extraction and improve the accuracy of water-body detection. First, this paper uses a swarm intelligence optimization algorithm, Dung Beetle Optimizer (DBO), to optimize the initial cluster center of the K-means clustering algorithm, which is called the DBO-K-means (DK) method. The DK method divides the training images into four categories and extracts the water bodies in them to generate the water-body labels required for deep learning model training and testing, and the whole process does not require human intervention. Then, the labels generated by DK and training data set images are fed into the Classifier–Optimizer (CO) for training. The classifier performs a dense classification task at the pixel level, resulting in an initial result image with blurred boundaries of the water body. Then, the optimizer takes this preliminary result image and the original SAR image as input, performs fine-grained optimization on the preliminary result, and finally generates a result image with a clear water-body boundary. Finally, we evaluated the accuracy of water-body detection using multiple performance indicators including ACC, precision, F1-Score, recall, and Kappa coefficient. The results show that the values of all indicators exceed 93%, which demonstrates the high accuracy and reliability of our proposed water-body detection method. Overall, this paper presents a novel DK-based approach that improves the automation and accuracy of deep learning methods for detecting water bodies in SAR images by enabling automatic sample extraction and optimization of deep learning models. [ABSTRACT FROM AUTHOR]

This paper presents an extraction method for large gradient three-dimensional (3-D) displacements of mining areas using single-track interferometric synthetic aperture radar (InSAR), Boltzmann function, and subsidence characteristics. This is mainly aimed at overcoming the limitations of surface deformation monitoring in mining areas by using single-track InSAR technology. One is that the rapid and large gradient deformation of the mine surface usually leads to image decoherence, which makes it difficult to obtain correct deformation information. Second, the surface deformation monitored by InSAR is only one-dimensional line of sight (LOS) displacement, and thus it is difficult to reflect the real 3-D displacements of the surface. Firstly, the Boltzmann function prediction model (BPM) is introduced to assist InSAR phase unwrapping; thus the missing large gradient deformation phase of InSAR is recovered. Then, the subsidence characteristics in mining horizontal (or near-horizontal) coal seams are used as prior knowledge for theoretical derivation, and a 3-D displacement extraction model of coal seam mining with single-track InSAR is constructed. The feasibility of the method is verified by simulating LOS displacements with random noise and underestimation phenomenon caused by the large gradient deformation as InSAR observations. The results show that the root mean square error (RMSE) of 3-D displacements on the observation line calculated by the proposed method is 21.5 mm, 19.0 mm, and 32.9 mm, respectively. Based on the single-track Sentinel-1 images, the method in this paper was applied to the extraction of surface 3-D displacements in the Huaibei coal mine, and the experimental results show that the extracted 3-D displacements are in good agreement with that of measurement by the surface observation station. The proposed method can adapt to limited InSAR acquisitions and complex monitoring environments. [ABSTRACT FROM AUTHOR]

The European Ground Motion Service (EGMS) is an operational data service that uses interferometric analysis of Sentinel-1 radar images to provide high-resolution monitoring of ground deformation. The service is the first continental ground motion public dataset that is open and available for various applications and studies. This paper presents the validation workflow of the EGMS product in terms of spatial coverage and density of measurement points. The study employs open land cover data to evaluate the density per class and proposes statistical parameters associated with the data processing and timeseries estimation to ensure consistency across different selected sites.The validation process involves twelve selected sites across Europe, representing the four processing entities, covering both rural and urban areas. The paper highlights the importance of ensuring completeness and consistency of the EGMS product for its effective use, along with pointwise quality measures critical in assessing the quality of the EGMS point timeseries results. Additionally, the paper discusses the challenges faced during the pre-processing of the data from EGMS and presents a custom algorithm designed to eliminate biases in the data. As an open and freely available dataset, the EGMS will provide valuable resources for further research and applications, enabling better understanding and management of geohazards, environmental monitoring, and urban planning. [ABSTRACT FROM AUTHOR]

Interferometric synthetic aperture radar (InSAR) processing techniques have been widely used to derive surface deformation or retrieve terrain elevation. Over the development of the past few decades, most research has mainly focused on its application, new techniques for improved accuracy, or the investigation of a particular error source and its correction method. Therefore, a thorough discussion about each error source and its influence on InSAR-derived products is rarely addressed. Additionally, InSAR is a challenging topic for beginners to learn due to the intricate mathematics and the necessary signal processing knowledge required to grasp the core concepts. This results in the fact that existing papers about InSAR are easy to understand for those with a technical background but difficult for those without. To cope with the two issues, this paper aims to provide an organized, comprehensive, and easily understandable review of the InSAR error budget. In order to assist readers of various backgrounds in comprehending the concepts, we describe the error sources in plain language, use the most fundamental math, offer clear examples, and exhibit numerical and visual comparisons. In this paper, InSAR-related errors are categorized as intrinsic height errors or location-induced errors. Intrinsic height errors are further divided into two subcategories (i.e., systematic and random error). These errors can result in an incorrect number of phase fringes and introduce unwanted phase noise into the output interferograms, respectively. Location-induced errors are the projection errors caused by the slant-ranging attribute of the SAR systems and include foreshortening, layover, and shadow effects. The main focus of this work is on systematic and random error, as well as their effects on InSAR-derived topographic and deformation products. Furthermore, because the effects of systematic and random errors are greatly dependent on radar wavelengths, different bands are utilized for comparison, including L-band, S-band, C-band, and X-band scenarios. As examples, we used the parameters of the upcoming NISAR operation to represent L-band and S-band, ERS-1 and Sentinel-1 to represent C-band, and TerraSAR-X to represent X-band. This paper seeks to bridge this knowledge gap by presenting an approachable exploration of InSAR error sources and their implications. This robust and accessible analysis of the InSAR error budget is especially pertinent as more SAR data products are made available (e.g., NISAR, ICEYE, Capella, Umbra, etc.) and the SAR user-base continues to expand. Finally, a commentary is offered to explore the error sources that were not included in this work, as well as to present our thoughts and conclusions. [ABSTRACT FROM AUTHOR]

As the electromagnetic environment becomes increasingly complex, a synthetic aperture radar (SAR) system with wideband active transmission and reception is vulnerable to interference from devices at the same frequency. SAR interference detection using the transform domain has become a research hotspot in recent years. However, existing transform domain interference detection methods exhibit unsatisfactory performance in complex interference environments. Moreover, most of them rely on label information, while existing publicly available interference datasets are limited. To solve these problems, this paper proposes an SAR unsupervised interference detection model that combines Canny edge detection with vision transformer (CEVIT). Using a time–frequency spectrogram as input, CEVIT realizes interference detection in complex interference environments with multi-interference and multiple types of interference by means of a feature extraction module and a detection head module. To validate the performance of the proposed model, experiments are conducted on airborne SAR interference simulation data and Sentinel-1 real interference data. The experimental results show that, compared with the other object detection models, CEVIT has the best interference detection performance in a complex interference environment, and the key evaluation indexes (e.g., Recall and F1-score) are improved by nearly 20%. The detection results on the real interfered echo data have a Recall that reaches 0.8722 and an F1-score that reaches 0.9115, which are much better than those of the compared methods, and the results also indicate that the proposed model achieves good detection performance with a fast detection speed in complex interference environments, which has certain practical application value in the interference detection problem of the SAR system. [ABSTRACT FROM AUTHOR]

This paper presents a comparison between the Sentinel-1 (S1)/Sentinel-2 (S2)-derived soil moisture products at plot scale (S2MP) and in situ soil moisture measurements at a 10 cm depth for several winter and summer crops. Specifically, the paper discusses the consistency between the in situ soil moisture measurements, usually performed at a 10 cm soil depth, and the variable S1 C-band penetration depth in soil due to soil humidity conditions, vegetation development and S1 acquisition configuration. The aim is to provide end users with the strength and limitations of S1-derived soil moisture, mainly the S2MP soil moisture product, for their further applications. Both the estimated and measured soil moisture (SM) were evaluated over three testing fields in a Mediterranean climatic context, with crop cycles including wheat, tomato, cover crops and soybeans. The main results showed that the comparison between the S2MP-estimated SM based on S1 backscattering (at ~5 cm depth) with a 10 cm in situ SM is not always relevant during the crop cycle. In dry conditions, the S1 SM significantly underestimated the 10 cm SM measurements with an underestimation that could reach around 20 vol.% in some extremely dry conditions. This high underestimation was mainly due to the difference between the topsoil SM captured by the S1 sensor and the 10 cm in depth SM. Moderately wet conditions due to rainfall or irrigation showed less of a difference between the S1-estimated SM and the 10 cm in situ SM and varying between −10 and −5 vol.% due to the homogeneity of the SM at different soil depths. For extremely wet conditions, the S1 SM started to underestimate the SM values with an underestimation that can reach an order of −10 vol.%. A comparison of the S1-estimated SM as a function of the vegetation development showed that, for the studied crop types, the S1 SM estimates are only valid for low and moderate vegetation cover with a Normalized Difference Vegetation Index (NDVI) of less than 0.7. For dense vegetation cover (NDVI > 0.7), overestimations of the SM (average bias of about 4 vol.%) are mainly observed for developed tomato and soybean crops due to fruits' emergence, whereas an extreme underestimation (average bias reaching −15.5 vol.%) is found for developed wheat cover due to the vertical structure of the wheat kernels. The results also suggest that the optimal SM estimations by S1 could be mainly obtained at low radar incidence angles (incidence angle less than 35°). [ABSTRACT FROM AUTHOR]

The No.4 tailings pond of the Dexing Copper Mine is the second largest in Asia. The tailing pond is a dangerous source of man-made debris flow with high potential energy. In view of the lack of effective and low-cost global safety monitoring means in this region, in this paper, the time-series InSAR technology is innovatively introduced to monitor the deformation of tailings dam and significant key findings are obtained. First, the surface deformation information of the tailings pond and its surrounding areas was extracted by using SBAS-InSAR technology and Sentinel-1A data. Second, the cause of deformation is explored by analyzing the deformation rate, deformation accumulation, and three typical deformation rate profiles of the representative observation points on the dam body. Finally, the power function model is used to predict the typical deformation observation points. The results of this paper indicated that: (1) the surface deformation of the tailings dam can be categorized into two directions: the upper portion of the dam moving away from the satellite along the Line of Sight (LOS) at a rate of −40 mm/yr, whereas the bottom portion approaching the satellite along the LOS at a rate of 8 mm/yr; (2) the deformation of the dam body is mainly affected by the inventory deposits and the construction materials of the dam body; (3) according to the current trend, deformation of two typical observation points in the LOS direction will reach the cumulative deformation of 80 mm and −360 mm respectively. The research results can provide data support for safety management of No.4 tailings dam in the Dexing Copper Mine, and provide a method reference for monitoring other similar tailings dams. [ABSTRACT FROM AUTHOR]

Due to the complex terrain and intense tectonic activity, and harsh climate in the Qinling-Daba Mountains, many landslides occur in the area. Most of these landslides are extremely active, posing a serious threat to the safety and property of local residents. As a mature deformation-monitoring technology, InSAR has been widely used in landslide detection, but the steep terrain and dense vegetation in the Qinling-Daba Mountains make detection challenging. Hence, it is important to choose suitable data sources and methods for landslide detection via InSAR in this area. This study was the first to collect ALOS/PALSAR−2 and Sentinel−1A images to detect landslides in the Qinling-Daba Mountains, applying a method combining IPTA and SBAS. In total, 88 landslides were detected and validated. The results show that the deformation-detection error rate of Sentinel−1A is 2% higher than that of ALOS/PALSAR−2 and that its landslide-recognition rate is 47.7% lower than that of ALOS/PALSAR−2. Upon comparing and analyzing the visibility, coherence, closed−loop residuals, and typical time series of landslide deformation from the two kinds of data, it was found that the extremely low quality of available Sentinel−1 A summer data is a major factor influencing that system's performance. ALOS/PALSAR−2 is more likely to detect landslides in areas with high vegetation coverage, meeting more than 90% of the monitoring needs. It is thus highly suitable for landslide detection in the Qinling–Daba Mountains, where seasonality is significant. In this paper, for the first time, multiple data sources are compared in detail with regard to their utility in landslide detection in the Qinling–Daba Mountains. A large number of accuracy metrics are applied, and the results are analyzed. The study provides important scientific support for the selection of data sources for future landslide monitoring in the Qinling–Daba Mountain area and similar areas and for the selection of methods to evaluate the accuracy of InSAR monitoring. [ABSTRACT FROM AUTHOR]

In the application of synthetic aperture radar differential interferometry in urban environments, it is easy to regard the phase change in the deformation band of buildings under construction as noise that requires filtering. This introduces an error into the surrounding area while over-filtering, resulting in an error in the magnitude of the deformation measurement results for the entire region and the loss of deformation details in the surrounding area. Based on the traditional DInSAR workflow, this study added a deformation magnitude identification step, determined the deformation magnitude by using enhanced offset tracking technology, supplemented the filtering quality map and removed the construction areas that affect the interferometry in the filtering stage. The enhanced offset tracking technique adjusted the ratio of contrast saliency and coherence via the contrast consistency peak in the radar intensity image, which was used as the basis for adjusting the adaptive window size. The method proposed in this paper was evaluated in an experiment on a stable region using simulated data and in an experiment on a large deformation region using Sentinel-1 data. The experimental results show that the enhanced method has a better anti-noise ability than the traditional method, and the accuracy rate is improved by about 12%. The supplemented quality map can effectively remove the large deformation area to prevent over-filtering while ensuring the filtering quality, and it can achieve better filtering results. [ABSTRACT FROM AUTHOR]

The development of remote sensing technology has redefined the approaches to the Earth's surface monitoring. The Copernicus Programme promoted by the European Space Agency (ESA) and the European Union (EU), through the launch of the Synthetic Aperture Radar (SAR) Sentinel-1 and the multispectral Sentinel-2 satellites, has provided a valuable contribution to monitoring the Earth's surface. There are several review articles on the land use/land cover (LULC) matter using Sentinel images, but it lacks a methodical and extensive review in the specific field of land consumption monitoring, concerning the application of SAR images, in particular Sentinel-1 images. In this paper, we explored the potential of Sentinel-1 images to estimate land consumption using mathematical modeling, focusing on innovative approaches. Therefore, this research was structured into three principal steps: (1) searching for appropriate studies, (2) collecting information required from each paper, and (3) discussing and comparing the accuracy of the existing methods to evaluate land consumption and their applied conditions using Sentinel-1 Images. Current research has demonstrated that Sentinel-1 data has the potential for land consumption monitoring around the world, as shown by most of the studies reviewed: the most promising approaches are presented and analyzed. [ABSTRACT FROM AUTHOR]

Crop identification at the field level using remote sensing data is a very important task. However, the use of multispectral data for the construction of vegetation indices is sometimes impossible or limited. For such situations, solutions based on the use of time series of synthetic aperture radar (SAR) indices are promising, eliminating the problems associated with cloudiness and providing an assessment of crop development characteristics during the growing season. We evaluated the use of time series of synthetic aperture radar (SAR) indices to characterize crop development during the growing season. The use of SAR imagery for crop identification addresses issues related to cloudiness. Therefore, it is important to choose the SAR index that is the most stable and has the lowest spatial variability throughout the growing season while being comparable to the normalized difference vegetation index (NDVI). The presented work is devoted to the study of these issues. In this study, the spatial variabilities of different SAR indices time series were compared for a single region for the first time to identify the most stable index for use in precision agriculture, including the in-field heterogeneity of crop sites, crop rotation control, mapping, and other tasks in various agricultural areas. Seventeen Sentinel-1B images of the southern part of the Khabarovsk Territory in the Russian Far East at a spatial resolution of 20 m and temporal resolution of 12 days for the period between 14 April 2021 and 1 November 2021 were obtained and processed to generate vertical–horizontal/vertical–vertical polarization (VH/VV), radar vegetation index (RVI), and dual polarimetric radar vegetation index (DpRVI) time series. NDVI time series were constructed from multispectral Sentinel-2 images using a cloud cover mask. The characteristics of time series maximums were calculated for different types of crops: soybean, oat, buckwheat, and timothy grass. The DpRVI index exhibited the highest stability, with coefficients of variation of the time series that were significantly lower than those for RVI and VH/VV. The main characteristics of the SAR and NDVI time series—the maximum values, the dates of the maximum values, and the variability of these indices—were compared. The variabilities of the maximum values and dates of maximum values for DpRVI were lower than for RVI and VH/VV, whereas the variabilities of the maximum values and the dates of maximum values were comparable for DpRVI and NDVI. On the basis of the DpRVI index, classifications were carried out using seven machine learning methods (fine tree, quadratic discriminant, Gaussian naïve Bayes, fine k nearest neighbors or KNN, random under-sampling boosting or RUSBoost, random forest, and support vector machine) for experimental sites covering a total area of 1009.8 ha. The quadratic discriminant method yielded the best results, with a pixel classification accuracy of approximately 82% and a kappa value of 0.67. Overall, 90% of soybean, 74.1% of oat, 68.9% of buckwheat, and 57.6% of timothy grass pixels were correctly classified. At the field level, 94% of the fields included in the test dataset were correctly classified. The paper results show that the DpRVI can be used in cases where the NDVI is limited, allowing for the monitoring of phenological development and crop mapping. The research results can be used in the south of Khabarovsk Territory and in neighboring territories. [ABSTRACT FROM AUTHOR]

Oil spillages on a sea's or an ocean's surface are a threat to marine and coastal ecosystems. They are mainly caused by ship accidents, illegal discharge of oil from ships during cleaning and oil seepage from natural reservoirs. Synthetic-Aperture Radar (SAR) has proved to be a useful tool for analyzing oil spills, because it operates in all-day, all-weather conditions. An oil spill can typically be seen as a dark stretch in SAR images and can often be detected through visual inspection. The major challenge is to differentiate oil spills from look-alikes, i.e., low-wind areas, algae blooms and grease ice, etc., that have a dark signature similar to that of an oil spill. It has been noted over time that oil spill events in Pakistan's territorial waters often remain undetected until the oil reaches the coastal regions or it is located by concerned authorities during patrolling. A formal remote sensing-based operational framework for oil spills detection in Pakistan's Exclusive Economic Zone (EEZ) in the Arabian Sea is urgently needed. In this paper, we report the use of an encoder–decoder-based convolutional neural network trained on an annotated dataset comprising selected oil spill events verified by the European Maritime Safety Agency (EMSA). The dataset encompasses multiple classes, viz., sea surface, oil spill, look-alikes, ships and land. We processed Sentinel-1 acquisitions over the EEZ from January 2017 to December 2023, and we thereby prepared a repository of SAR images for the aforementioned duration. This repository contained images that had been vetted by SAR experts, to trace and confirm oil spills. We tested the repository using the trained model, and, to our surprise, we detected 92 previously unreported oil spill events within those seven years. In 2020, our model detected 26 oil spills in the EEZ, which corresponds to the highest number of spills detected in a single year; whereas in 2023, our model detected 10 oil spill events. In terms of the total surface area covered by the spills, the worst year was 2021, with a cumulative 395 sq. km covered in oil or an oil-like substance. On the whole, these are alarming figures. [ABSTRACT FROM AUTHOR]

Along the western coastal plain of the Red Sea, the discovery of lithic tools proved that the occurrence of archaeological remains belonged to the Stone Age era. Unfortunately, until recently, most of the Stone Age site plans in the western Red Sea periphery have been unknown because of change in climate in addition to covering these sites with a large layer of sand. Recently, remote sensing (RS) data have proven to be effective at identifying buried archaeological sites using radar satellite imagery due to their ability to penetrate the land surface. This paper aims to identify and reconstruct several potential Stone Age sites using radar satellite images in the Tokar region, North-Eastern Sudan, on the western plain of the Red Sea. Radar (Sentinel-1 SAR GRD: C-band) data were processed utilizing the advantages of the Google Earth Engine platform and Snap software. The results of this research showed that some potential settlements belonging to the Stone Age era (expectedly dating back to the end of the Pleistocene and/or the initial phase of the Holocene) have subcircular shapes with some interior subcircles. These results shed new light on the potential construction technique, size, and function of the settlement in the Stone Age era and can provide some initial insights into the ancient lifestyle in this region. Additionally, this study can aid in future archaeological surveys and excavation missions in this region. [ABSTRACT FROM AUTHOR]

Accurate detection of sea ice leads is essential for safe navigation in polar regions. In this paper, a shape-aware (SA) network, SA-DeepLabv3+, is proposed for automatic lead detection from synthetic aperture radar (SAR) images. Considering the fact that training data are limited in the task of lead detection, we construct a dataset fusing dual-polarized (HH, HV) SAR images from the C-band Sentinel-1 satellite. Taking the DeepLabv3+ as the baseline network, we introduce a shape-aware module (SAM) to combine multi-scale semantic features and shape information and, therefore, better capture the shape characteristics of leads. A squeeze-and-excitation channel-position attention module (SECPAM) is designed to enhance lead feature extraction. Segmentation loss generated by the segmentation network and shape loss generated by the shape-aware stream are combined to optimize the network during training. Postprocessing is performed to filter out segmentation errors based on the aspect ratio of leads. Experimental results show that the proposed method outperforms the existing benchmarking deep learning methods, reaching 96.82% for overall accuracy, 93.01% for F1-score, and 91.48% for mIoU. It is also found that the fusion of dual-polarimetric SAR channels as the input could effectively improve the accuracy of sea ice lead detection. [ABSTRACT FROM AUTHOR]

The study of ancient irrigation is crucial in the archaeological research of arid regions. It covers a wide range of topics, with the Near East being the focus for decades. However, political instability and limited data have posed challenges to these studies. The primary objective is to establish a standardised method applicable to different arid environments using the Google Earth Engine platform, considering local relief of terrain and seasonal differences in vegetation. This study integrates multispectral data from LANDSAT 5, Sentinel-2, SAR imagery from Sentinel 1, and TanDEM-X (12 m and 30 m) DSMs. Using these datasets, calculations of selected vegetation indices such as the SMTVI and NDVSI, spectral decomposition methods such as TCT and PCA, and topography-based methods such as the MSRM contribute to a comprehensive understanding of landscape irrigation. This paper investigates the influence of modern environmental conditions on the visibility of features like levees and palaeo-channels by testing different methods and parameters. This study aims to identify the most effective approach for each case study and explore the possibility of applying a consistent method across all areas. Optimal results are achieved by combining several methods, adjusting seasonal parameters, and conducting a comparative analysis of visible features. [ABSTRACT FROM AUTHOR]

Sea ice, as an important component of the Earth's ecosystem, has a profound impact on global climate and human activities due to its thickness. Therefore, the inversion of sea ice thickness has important research significance. Due to environmental and equipment-related limitations, the number of samples available for remote sensing inversion is currently insufficient. At high spatial resolutions, remote sensing data contain limited information and noise interference, which seriously affect the accuracy of sea ice thickness inversion. In response to the above issues, we conducted experiments using ice draft data from the Beaufort Sea and designed an improved GBDT method that integrates feature-enhancement and active-learning strategies (IFEAL-GBDT). In this method, the incident angle and time series are used to perform spatiotemporal correction of the data, reducing both temporal and spatial impacts. Meanwhile, based on the original polarization information, effective multi-attribute features are generated to expand the information content and improve the separability of sea ice with different thicknesses. Taking into account the growth cycle and age of sea ice, attributes were added for month and seawater temperature. In addition, we studied an active learning strategy based on the maximum standard deviation to select more informative and representative samples and improve the model's generalization ability. The improved GBDT model was used for training and prediction, offering advantages in dealing with nonlinear, high-dimensional data, and data noise problems, further expanding the effectiveness of feature-enhancement and active-learning strategies. Compared with other methods, the method proposed in this paper achieves the best inversion accuracy, with an average absolute error of 8 cm and a root mean square error of 13.7 cm for IFEAL-GBDT and a correlation coefficient of 0.912. This research proves the effectiveness of our method, which is suitable for the high-precision inversion of sea ice thickness determined using Sentinel-1 data. [ABSTRACT FROM AUTHOR]

This paper presents a method for determining the impact of dam reservoirs on the ice cover of rivers downstream of their locations based on a long measurement period (1950–2020) and synthetic-aperture radar (SAR) data. Two rivers and two sets of dam reservoirs located in the Carpathian Mountains (central Europe) were selected for this study. In order to estimate the influence of reservoirs, a logistic regression model was built to describe the relationship between the course of air temperature and the occurrence of ice cover (i.e., total ice cover and border ice) at water gauge cross sections upstream and downstream of the reservoirs. The influence of reservoirs was then defined as the differences between the number of days with ice cover predicted from air temperature and those observed at the water gauge cross sections. Additionally, the extent of the impact of the reservoirs was estimated based on SAR data (Sentinel-1) by identifying river sections downstream of the reservoirs on which total ice cover did not form despite the persistence of very low air temperatures. The study shows that dam reservoirs play an important role in decreasing the incidence of ice cover on rivers. The occurrence of ice cover as a result of reservoir operations could decrease by over 80 % in the sections immediately downstream of the reservoirs. The impact of the reservoir on river ice cover diminishes as the distance from the reservoir increases. Using SAR data, it was estimated that total ice cover did not form in sections 26–60 km downstream of the reservoirs, despite the presence of favorable thermal conditions. Based on the results of the study presented here, it can be assumed that in areas where many dam reservoirs are located, the ice regime of rivers is significantly transformed, which should be taken into account when studying river ice cover. This study also demonstrates that the logistic regression model and SAR data are useful tools for assessing the impact of dam reservoirs on river ice cover. [ABSTRACT FROM AUTHOR]

This paper examines a feature-level fusion framework for detecting and mapping land degradation (LD) and enabling sustainable land management (SLM) in semi-arid areas using optical sensors and Synthetic Aperture Radar (SAR) satellite data. The objectives of this review were to (i) determine the trends and geographical location of land degradation mapping publications, (ii) to identify and report current challenges pertaining to mapping LD using multiscale remote sensing data, (iii) to recommend a way forward for monitoring LD using multiscale remote sensing data. The study reviewed 78 peer-reviewed research articles published over the past 24 years (1998–2022). Image fusion has the potential to be more useful in various remote sensing applications than individual sensor image data, making it more informative and valuable in the interpretation process. In addition, this review discusses the importance of SAR and optical image fusion, pixel-level techniques, applications, and major classes of quality metrics for objectively assessing fusion performance. The literature review alluded that the SAR and optical image fusion in the detection and mapping of land degradation and enabling sustainable land management has not been fully explored. Advanced techniques such as the fusion of SAR and optical satellite imageries need to be incorporated for the detection and mapping of LD, as well as the promotion of SLM in halting LD in South African drylands and around the world. We conclude that there is scope for further research on the fusion of SAR and optical images, as new micro-wave and optical sensors with higher resolution are introduced on a regular basis. The results of this review contribute to a better understanding of the applications of SAR and optical image fusion in future research in the severely degraded drylands of southern Africa. The fusion of SAR and optical data still remains an open challenge. The future of different remote sensing applications lies in this kind of fusion. Land degradation is one of the greatest challenges amongst the environmental problems in South Africa, causing a reduction in the capacity of the land to perform ecosystem functions and services that support society and development. Yet, in South Africa, there are no studies that have widely investigated the potential for a fusion of SAR and optical data to detect and map land degradation and SLM practices. This paper established a baseline for understanding the application of a fusion of SAR and optical data as rapid tools for mapping, monitoring, and evaluating LD, as well as the impacts of SLM practices in South Africa's degraded drylands. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Remote Sensing is the property of Editorial Office of Journal of Remote Sensing & Science Publishing Co. and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Accurately estimating snow hydrology parameters, including snow coverage mapping and snow depth, plays a significant role in comprehending water resource dynamics, flood forecasting, and environmental management in regions influenced by snow cover. These parameters are critical for hydrological models that simulate snowmelt and runoff, which are essential for predicting water availability and managing water resources in snow-covered areas. Traditional methods for estimating these parameters often rely on manual measurements or simplistic models, which can be inadequate for capturing the complexity of snow-related processes. In recent years, there has been a growing interest in leveraging deep learning techniques for snow hydrology parameter estimation, offering the potential to overcome these limitations. This review paper comprehensively analyzes the current state, challenges, and future directions of image-based approaches in snow hydrology parameter estimation. By harnessing the power of automated methods, particularly deep learning, these approaches demonstrate the ability to capture intricate spatial and temporal relationships present in image data. A comparative analysis between traditional and image-based methods highlights the strengths of automated approaches, including scalability and accuracy. Integration of image sensors, such as satellite imagery and crowd-sourced data, is explored as a crucial component of snow hydrology parameter estimation. Various satellite image sources, including Sentinel 1-2, Landsat, and MODIS, are discussed in terms of their suitability for snow hydrological applications. Despite the promise of image-based approaches, challenges remain, including data availability, model interpretability, and transferability. The paper identifies future research directions, emphasizing the exploration of novel deep learning architectures and uncertainty quantification techniques to address these challenges. In conclusion, this review underscores the importance of image-based approaches for advancing snow hydrology parameter estimation. By addressing challenges and maximizing potential impact, these approaches have the potential to revolutionize snow hydrological modeling and environmental management. [ABSTRACT FROM AUTHOR]

The accurate estimation of forest aboveground biomass is of great significance for forest management and carbon balance monitoring. Remote sensing instruments have been widely applied in forest parameters inversion with wide coverage and high spatiotemporal resolution. In this paper, the capability of different remote-sensed imagery was investigated, including multispectral images (GaoFen-6, Sentinel-2 and Landsat-8) and various SAR (Synthetic Aperture Radar) data (GaoFen-3, Sentinel-1, ALOS-2), in aboveground forest biomass estimation. In particular, based on the forest inventory data of Hangzhou in China, the Random Forest (RF), Convolutional Neural Network (CNN) and Convolutional Neural Networks Long Short-Term Memory Networks (CNN-LSTM) algorithms were deployed to construct the forest biomass estimation models, respectively. The estimate accuracies were evaluated under the different configurations of images and methods. The results show that for the SAR data, ALOS-2 has a higher biomass estimation accuracy than the GaoFen-3 and Sentinel-1. Moreover, the GaoFen-6 data is slightly worse than Sentinel-2 and Landsat-8 optical data in biomass estimation. In contrast with the single source, integrating multisource data can effectively enhance accuracy, with improvements ranging from 5% to 10%. The CNN-LSTM generally performs better than CNN and RF, regardless of the data used. The combination of CNN-LSTM and multisource data provided the best results in this case and can achieve the maximum R2 value of up to 0.74. It was found that the majority of the biomass values in the study area in 2018 ranged from 60 to 90 Mg/ha, with an average value of 64.20 Mg/ha. [ABSTRACT FROM AUTHOR]

This review provides an overview of the progress made in remote sensing application for soil moisture, vegetation and inundation mapping in wetland environments. The main objective of the paper was to assess the link between soil moisture variations and vegetation characteristics in wetland remote sensing studies. To achieve this objective, relevant literature was gathered from established search engines, e.g. Science Direct and Web of Science, along with specific search strategies and key phrases. Three hundred and ninety-three journal articles on wetland remote sensing published between 1980 and 2023 were collected and subjected to a comprehensive analysis. The findings indicate that remote sensing of wetland moisture, vegetation and inundation has been increasing, from three published work in the 1980s to 22 in the 1990s, to 88 between 2001 and 2010, and to 278 between 2011 and 2023. Results showed that there has been an improvement in the application of remote sensing in mapping of wetland moisture, inundation and vegetation in Africa between 2015 and 2023. Despite wide application of remote sensing to map these aspects, very few studies (2.1%) have focused on establishing the relationship between them. The analysis indicated that the launch of new Sentinel-1 radar and Sentinel-2 optical sensors in addition to the Landsat series, along with a variety of analytical methods, provided a great opportunity for derivation of soil moisture and vegetation data which can be used to establish the soil moisture–vegetation nexus. [ABSTRACT FROM AUTHOR]

Synthetic Aperture Radar (SAR) images are widely utilized in the field of remote sensing. However, there is a limited body of literature specifically addressing the compression of SAR learning images. To address the escalating volume of SAR image data for storage and transmission, which necessitates more effective compression algorithms, this paper proposes a novel framework for compressing SAR images. Experimental validation is performed using a representative low-resolution Sentinel-1 dataset and the high-resolution QiLu-1 dataset. Initially, we introduce a novel two-stage transformation-based approach aimed at suppressing the low-frequency components of the input data, thereby achieving a high information entropy and minimizing quantization losses. Subsequently, a quality map guidance image compression algorithm is introduced, involving the fusion of the input SAR images with a target-aware map. This fusion involves convolutional transformations to generate a compact latent representation, effectively exploring redundancies between focused and non-focused areas. To assess the algorithm's performance, experiments are carried out on both the low-resolution Sentinel-1 dataset and the high-resolution QiLu-1 dataset. The results indicate that the low-frequency suppression algorithm significantly outperforms traditional processing algorithms by 3–8 dB when quantifying the input data, effectively preserving image features and improving image performance metrics. Furthermore, the quality map guidance image compression algorithm demonstrates a superior performance compared to the baseline model. [ABSTRACT FROM AUTHOR]

Melting of sea ice in the Arctic has accelerated due to global warming. The Fram Strait (FS) serves as a crucial pathway for sea ice export from the Arctic to the North Atlantic Ocean. Monitoring sea ice drift (SID) in the FS provides insight into how Arctic sea ice responds to the climate change. The SID has been retrieved from Sentinel-1 synthetic aperture radar (SAR), Advanced Very High Resolution Radiometer (AVHRR), Moderate Resolution Imaging Spectroradiometer (MODIS), and Advanced Microwave Scanning Radiometer for EOS (AMSR-E), and further exploration is needed for the retrieval of SID using optical imagery. In this paper, we retrieve SID in the FS using the Chinese HaiYang1-D (HY-1D) satellite equipped with the Coastal Zone Imager (CZI). A multi-template matching technique is employed to calculate the cross-correlation, and subpixel estimation is used to locate displacement vectors from the cross-correlation matrix. The dataset covering March to May 2021 was divided into hourly and daily intervals for analysis, and validation was performed using Copernicus Marine Environment Monitoring Service (CMEMS) SAR-based product and International Arctic Buoy Programme (IABP) buoy. A comparison with the CMEMS SID product revealed a high correlation with the daily interval dataset; however, due to the spatial and temporal variability in the sea ice motion, differences are observed with the hourly interval dataset. Additionally, validation with the IABP buoys yielded a velocity bias of -0.005 m s -1 and RMSE of 0.031 m s -1 for the daily interval dataset, along with a flow direction bias of 0.002 rad and RMSE of 0.009 rad, respectively. For the hourly interval dataset, the velocity bias was negligible (0 m s -1), with a RMSE of 0.036 m s -1 , while the flow direction bias was 0.003 rad, with a RMSE of 0.010 rad. In addition, during the validation with buoys, we found that the accuracy of retrieving the SID flow direction is distinctly interrelated with the sea ice displacement. [ABSTRACT FROM AUTHOR]

The coseismic deformation field on both sides of the fault, especially the distribution and change characteristics of near-field deformation, not only provides important constraints for the fine inversion of the slip distribution model but also serves as an important basis for the anti-disruption defense of the cross-fault linear engineering facilities. In this paper, we used Sentinel-1 satellite data to obtain the coseismic deformation field of the Maduo earthquake by using InSAR and offset techniques. We quantitatively compared the coseismic displacement of the three types of data: InSAR, offset, and optical images. The results show that optical images and offset provided more robust near-fault (<2 km) deformation insights than InSAR, which exhibited irregular deformation patterns due to incoherence near the fault. The maximum relative displacements for InSAR and offset observations are ~2.8 m and 4 m, respectively. Then we tested various fault slip models with different data constraints, revealing that a combined inversion of GPS, InSAR, and offset data offers superior constraints on slip distribution. This integrative approach effectively captured both shallow and deep fault slip, particularly near the fault zone. The eastern branch fault model, jointly constrained by GPS, InSAR, and offset data, is the optimal coseismic slip distribution model for the Maduo earthquake, and the maximum slip is 5.55 m. [ABSTRACT FROM AUTHOR]

This paper designed a Generative Adversarial Network (GAN)-based super-resolution framework for scatterometer ocean surface wind speed (OSWS) mapping. An improved GAN, WSGAN, was well-trained to generate high-resolution OSWS (~1/64 km) from low-resolution OSWS (~12.5 km) retrieved from scatterometer observations. The generator of GAN incorporated Synthetic Aperture Radar (SAR) information in the training phase. Therefore, the pre-trained model could reconstruct high-resolution OSWS with historical local spatial and texture information. The training experiments were executed in the South China Sea using the OSWS generated from the Advanced SCATterometer (ASCAT) scatterometer and Sentinel-1 SAR OSWS set. Several GAN-based methods were compared, and WSGAN performed the best in most sea states, enabling more detail mining with fewer checkerboard artifacts at a scale factor of eight. The model reaches an overall root mean square error (RMSE) of 0.81 m/s and an overall mean absolute error (MAE) of 0.68 m/s in the collocation region of ASCAT and Sentinel-1. The model also exhibits excellent generalization capability in another scatterometer with an overall RMSE of 1.11 m/s. This study benefits high-resolution OSWS users when no SAR observation is available. [ABSTRACT FROM AUTHOR]

Interferometric synthetic aperture radar (InSAR) has gained considerable attention as a landslide monitoring strategy owing to its high accuracy, large coverage, and relatively low associated costs. A crucial drawback of InSAR, however, has limited its further incorporation: one-dimensional estimations along the sensor's line-of-sight (LOS). This leads to an ambiguity in results and a less intuitive understanding of landslide kinematics. A frequently exercised approach to address this issue has been taking inspiration from the topography to establish compatibility assumptions between velocity components, yet little insight exists on the performance of these methods. The objective of this paper is to investigate the performance of four renowned topography-based methods—Surface Parallel Flow Model (SPFM), SPFM coupled with least-squares method (SPF-LSM), Aspect Parallel Flow Model (APFM), and Steepest Terrain Following Model (STFM)—in evaluating the magnitude and geometry of total velocity vectors. To this end, the analysis is performed on 202 Radarsat-2 and 243 Sentinel-1 scenes acquired over a section of the Thompson River valley, a critical railway corridor in Western Canada traversing 14 landslides. The results indicate that the APFM provides estimations with the lowest magnitude error (15–19 mm/yr or 18.75–23.75% of in situ measurements) compared to the other approaches. SPFM and SPF-LSM are highly sensitive to LOS variance and tend to bias the interpreted vectors toward the north orientation. However, APFM and STFM reflect more realistic aspect angles, with the former inclined to steeper travel angles and the latter suffering from erratic upward travel angles due to local topographies. [ABSTRACT FROM AUTHOR]

This paper presents a methodology to detect the coastal erosion and progradation effects in the 'Atrato River' delta, located in the Gulf of Urabá in Colombia, using SAR (Synthetic Aperture Radar) images. Erosion is the physical–mechanical loss of the soil that affects its functions and ecosystem services while producing a reduction in its productive capacity. Progradation is the deposition of layers in the basinward direction while moving coastward. Other studies have investigated these two phenomena using optical images, encountering difficulties due to the persistent presence of clouds in this region. In order to avoid the cloud effects, in this study, we used 16 Sentinel 1 SAR images with two different polarizations between 2016 and 2023. First, each image was rescaled from 0 to 255, then the image was despeckled by a deep learning (DL) model. Afterwards, a single RGB image was composed with the filtered polarizations. Next, a classifier with 99% accuracy based on Otsu's method was used to determine whether each pixel was water or not. Then, the classified image was registered to a reference one using Oriented FAST and Rotated BRIEF (ORB) descriptor. Finally, a multitemporal analysis was performed by comparing every image to the previous one to identify the studied phenomena, calculating areas. Also, all images were integrated to obtain a heatmap that showed the overall changes across eight years (2016–2023) in a single image. The multitemporal analysis performed found that the newly created mouth is the most active area for these processes, coinciding with other studies. In addition, a comparison of these findings with the Oceanic Niño Index (ONI) showed a relative delayed coupling to the erosion process and a coupling of progradation with dry and wet seasons. [ABSTRACT FROM AUTHOR]

Remote sensing estimations of glacier flow velocity could provide effective methods for the long-term monitoring of glacier flow velocity. This paper calculated the velocity in the line-of-sight (LOS) direction by combining DInSAR and offset-tracking technology with ascending and descending Sentinel-1 images of the Urumqi Glacier No.1 from 2016 to 2017. Meanwhile, the velocity in the azimuthal direction was obtained by combining MAI and offset-tracking technology. Then, the eastward, northward, and upward flow velocities were retrieved using the Helmert variance component estimation method. Finally, the standard error of the mean and mean errors of surface velocity in non-glaciated areas of the Urumqi Glacier No.1 were calculated to evaluate the accuracy of the results generated by the proposed method. The results showed: (1) The ascending LOS velocity and the descending LOS velocity were 1.812 m/a and −1.558 m/a from 2016 to 2017. The ascending azimuthal and descending azimuthal velocities were 0.978 m/a and −2.542 m/a, respectively. (2) The glacier flow velocities were 2.571 m/a and 1.801 m/a, respectively, for the eastward and northward directions. In the vertical direction, the velocity was −0.554 m/a. (3) The accuracy of the results generated by the proposed method were 0.028 m/a, 0.085 m/a, and 0.063 m/a in the east, north, and vertical directions. Therefore, it is suitable to use ascending and descending Sentinel-1 images and the study method proposed in this paper to estimate the surface flow velocity of mountain glaciers. [ABSTRACT FROM AUTHOR]

The paper aims to construct simple soil moisture(SM) retrieval model using Sentinel-1 synthetic aperture radar (SAR) data. The water cloud model (WCM) removed the contribution of vegetation to the radar backscattering coefficient, and the backscattering coefficient of soil was estimated. Based on the established SM retrieval model without soil roughness parameters, the SM in farmland and forest land was retrieved using radar VV-VH dual-polarization data. We considered the interference of uneven surfaces on the radar signal, added the radar local incidence angle parameter to improve the model, and constructed a semi-empirical SM retrieval model. The accuracy of the results showed Root Mean Square Error (RMSE) of 0.04 and the Pearson correlation coefficient (r) of 0.80. The SM retrieval model for removing soil roughness parameters can estimate soil moisture with reasonable accuracy. The influence of topographic factors (elevation, slope and aspect) on the retrieval results of the model was analyzed. It was found that the area with the steep slope and blocked radar signal is not conducive to estimate SM. The SM retrieval method constructed in this paper provides many advantages for some research and practical applications, and its application in other SAR data remains to be further studied. [ABSTRACT FROM AUTHOR]

Soil moisture is a crucial factor in the field of meteorology, hydrology, and agricultural sciences. In agricultural production, surface soil moisture (SSM) is crucial for crop yield estimation and drought monitoring. For SSM inversion, a synthetic aperture radar (SAR) offers a trustworthy data source. However, for agricultural fields, the use of SAR data alone to invert SSM is susceptible to the influence of vegetation cover. In this paper, based on Sentinel-1 microwave remote sensing data and Sentinel-2 optical remote sensing data, a convolution neural network optimized by sparrow search algorithm (SSA-CNN) was suggested to invert farmland SSM. The feature parameters were first extracted from pre-processed remote sensing data. Then, the correlation analysis between the extracted feature parameters and field measured SSM data was carried out, and the optimal combination of feature parameters for SSM inversion was selected as the input data of the subsequent models. To enhance the performance of the CNN, the hyper-parameters of CNN were optimized using SSA, and the SSA-CNN model was built for SSM inversion based on the obtained optimal hyper-parameter combination. Three typical machine learning approaches, including generalized regression neural network, random forest, and CNN, were used for comparison to show the efficacy of the suggested method. With an average coefficient of determination of 0.80, an average root mean square error of 2.17 vol.%, and an average mean absolute error of 1.68 vol.%, the findings demonstrated that the SSA-CNN model with the optimal feature combination had a better accuracy among the 4 models. In the end, the SSM of the study region was inverted throughout four phenological periods using the SSA-CNN model. The inversion results indicated that the suggested method performed well in local situations. [ABSTRACT FROM AUTHOR]

Synthetic aperture radar (SAR) images depend on the dielectric properties of objects with certain incident angles. Thus, vessels and other metallic objects appear clear in SAR images however, they are difficult to be distinguished in optical images. Synergy of these two types of images leads to not only high spatial and spectral resolutions but also good explanation of the image scene. In this paper, a hybrid pixel-level image fusion method is proposed for integrating panchromatic (PAN), multispectral (MS) and SAR images. The fusion method is performed using Multi-stage guided filter (MGF) for optical images pansharpening, to get high preserving spatial details and nested Gram-Schmidt (GS) and Curvelet-Transform (CVT) methods for SAR and optical images,to increase the quality of the final fused image and benefit from the SAR image properties. The accuracy and performance of the proposed method are appraised using Landsat-8 Operational-Land-Imager (OLI) and Sentinel-1 images subjectively as well as objectively using different quality metrics. Moreover, the proposed method is compared to a number of state-of-the-art fusion techniques. The results show significant improvements in both visual quality and the spatial and spectral evaluation metrics. Consequently, the proposed method is capable of highlighting maritime activity for further processing. [ABSTRACT FROM AUTHOR]

Ground movement is a critical concern for urban safety, and understanding its causes and consequences is essential. Mining of hard coal in the Ruhr area of Germany has caused long-term subsidence, leading to building damage and sinkholes in affected cities. The multi-temporal interferometric synthetic aperture radar (MTInSAR) technique has been widely adopted for estimating ground movement at millimetre-level accuracy using spaceborne SAR data. Although many European government institutes have implemented this technique for monitoring purposes, the European Ground Motion Service (EGMS) provides up-to-date ground movement products (until the end of 2020) across 31 countries. However, these products may not always meet the requirements for local use due to being untimely or missing important features. This paper demonstrates how we estimated ground movement in Ahlen, around the Ruhr area of Germany, using EGMS data as a priori and reference source. We implemented MTInSAR using Sentinel-1 data from 2018 to 2021 and compared our results with those of EGMS. Our results reveal the movement one year ahead, contain more measurement points, and cover natural areas such as cropland and bare soil. We interpreted several movement scenarios in detail, and our work highlights the benefits of EGMS as an open-source overview for local monitoring applications. We also explored the influence of soil conditions on ground movement. Our findings suggest that the overall uplift trend observed during the post-mining phase has been mitigated or even reversed, likely due to soil shrinkage resulting from drought conditions, particularly in areas with high organic soil content. [ABSTRACT FROM AUTHOR]

Corn is an important food crop worldwide, and its yield is directly related to Chinese food security. Accurate remote sensing extraction of corn can realize the rational application of land resources, which is of great significance to the sustainable development of modern agriculture. In the field of large-scale crop remote sensing classification, single-period optical remote sensing images often cannot achieve high-precision classification. To improve classification accuracy, multiple time series image combinations have gradually been adopted. However, due to the influence of cloudy and rainy weather, it is often difficult to obtain complete time series optical images. Synthetic aperture radar (SAR) data are imaged by microwaves, which have strong penetrating power and are not affected by clouds. A critical way to solve this problem is to use SAR images to compensate for the lack of optical images and obtain a complete time series image in the corn-growing season. However, SAR images have limited wavelengths and cannot provide important wavelengths, such as visible light bands and near-infrared information. To solve this problem, this study took Zhaodong City, a vital corn-planting base in China, as the research area; took GF-6/GF-3 and Sentinel-1/Sentinel-2 as remote sensing data sources; designed12 classification scenarios; analyzed the best classification period and the best time series combination of corn classification; studied the influence of SAR images on the classification results of time series images; and compared the classification differences between GF-6/GF-3 and Sentinel-1/Sentinel-2. The results show that the classification accuracy of time series combinations is much higher than that of single-period images. The polarization characteristics of SAR images can improve the classification accuracy with time series images. The classification accuracy of GF series images from China is obviously higher than that of Sentinel series images. The research performed in this paper can provide a reference for agricultural classification by using remote sensing data. [ABSTRACT FROM AUTHOR]

Airborne and spaceborne platforms are the primary data sources for large-scale forest mapping, but visual interpretation for individual species determination is labor-intensive. Hence, various studies focusing on forests have investigated the benefits of multiple sensors for automated tree species classification. However, transferable deep learning approaches for large-scale applications are still lacking. This gap motivated us to create a novel dataset for tree species classification in central Europe based on multi-sensor data from aerial, Sentinel-1 and Sentinel-2 imagery. In this paper, we introduce the TreeSatAI Benchmark Archive, which contains labels of 20 European tree species (i.e., 15 tree genera) derived from forest administration data of the federal state of Lower Saxony, Germany. We propose models and guidelines for the application of the latest machine learning techniques for the task of tree species classification with multi-label data. Finally, we provide various benchmark experiments showcasing the information which can be derived from the different sensors including artificial neural networks and tree-based machine learning methods. We found that residual neural networks (ResNet) perform sufficiently well with weighted precision scores up to 79 % only by using the RGB bands of aerial imagery. This result indicates that the spatial content present within the 0.2 m resolution data is very informative for tree species classification. With the incorporation of Sentinel-1 and Sentinel-2 imagery, performance improved marginally. However, the sole use of Sentinel-2 still allows for weighted precision scores of up to 74 % using either multi-layer perceptron (MLP) or Light Gradient Boosting Machine (LightGBM) models. Since the dataset is derived from real-world reference data, it contains high class imbalances. We found that this dataset attribute negatively affects the models' performances for many of the underrepresented classes (i.e., scarce tree species). However, the class-wise precision of the best-performing late fusion model still reached values ranging from 54 % (Acer) to 88 % (Pinus). Based on our results, we conclude that deep learning techniques using aerial imagery could considerably support forestry administration in the provision of large-scale tree species maps at a very high resolution to plan for challenges driven by global environmental change. The original dataset used in this paper is shared via Zenodo (https://doi.org/10.5281/zenodo.6598390 ,). For citation of the dataset, we refer to this article. [ABSTRACT FROM AUTHOR]

Long-distance water transfer is a critical engineering measure to rectify disparities in water resource distribution across regions. The effective operation and safety of such projects are paramount to their success, as localized issues can have cascading consequences, potentially disrupting the entire network. Conventional ground-based monitoring methods have limitations in measuring the deformation of large-scale structures. In this paper, InSAR is employed to monitor the deformation of the Shuangwangcheng (SWC) Reservoir, which features a long embankment dam as part of the South-to-North Water Diversion Project in China. We utilize data from both Sentinel-1 and TerraSAR-X satellites to derive 7-year deformation. Results reveal that the entire dam experiences continuous subsidence, with the maximum deformation in the line-of-sight direction measuring ~160 mm. While minor differential settlements are noted in different sections of the dam, the gradient is not significant due to the dam's substantial length. The InSAR deformation results from multiple geometries demonstrate good consistency, with the highest correlation observed between the Sentinel-1 ascending and descending datasets, exceeding 0.9. Validation against the GNSS observations of the three sites on the SWC Dam shows the accuracy of InSAR displacements is ~8 mm. Water level changes do impact deformation, but consolidation settlement appears to be the primary controlling factor during the monitoring period. This study underscores the potential of InSAR in long-distance water transfer projects and highlights that spatially continuous deformation is the most significant advantage. [ABSTRACT FROM AUTHOR]

The research objective was to determine whether and to what extent SAR data can be used to determine changes in the water level in small glacial lakes (with an area of ~1 km2). The research object was Lake Biskupińskie - a small post-glacial lake in central Poland. As part of the research, a methodology for determining water level in small-area lakes based on radar data was developed, the potential for determining lake water levels using high- and medium-resolution SAR data was determined, and the results were verified against field measurements. The analyses employed data from two satellites, TerraSAR-X and Sentinel-1. The research confirmed the effectiveness of using SAR data to determine water-level fluctuations in small glacial lakes. The proposed methodology for working with data from the Sentinel-1 satellite allows for accurate estimation of WLF based on the results of interferometric analyses. Comparative analysis of the radar data results (lake surface) and field measurements (water level) were fully consistent with the data from TerraSAR-X and partially consistent with the data from Sentinel-1. The methodology of radar data analysis to determine WLF proposed in the paper has major research and applied potential, especially in the reconstruction of historical lake water levels. [ABSTRACT FROM AUTHOR]

Atmospheric delay correction remains a major challenge for interferometric synthetic aperture radar (InSAR) technology. In this paper, we first reviewed several commonly used methods for tropospheric delay correction in InSAR. Subsequently, considering the large volume and high temporal resolution of global navigation satellite system (GNSS) station measurement data, we proposed a method for spatial prediction of the InSAR tropospheric delay phase based on the backpropagation (BP) neural network and GNSS zenith total delay (ZTD). Using 42 Sentinel-1 interferograms over the Los Angeles area in 2021 as an example, we validated the accuracy of the BP + GNSS method in spatially predicting ZTD and compared the correction effects of BP + GNSS and five other methods on interferograms using the standard deviation (StaD) and structural similarity (SSIM). The results demonstrated that the BP + GNSS method reduced the root-mean-square error (RMSE) in spatial prediction by approximately 95.50% compared to the conventional interpolation method. After correction using the BP + GNSS method, StaD decreased in 92.86% of interferograms, with an average decrease of 52.03%, indicating significantly better correction effects than other methods. The SSIM of the BP + GNSS method was lower in mountainous and high-altitude areas with obvious terrain changes in the east and north, exhibiting excellent and stable correction performance in different seasons, particularly outperforming the GACOS method in autumn and winter. The BP + GNSS method can be employed to generate InSAR tropospheric delay maps with high temporal and spatial resolution, effectively addressing the challenge of removing InSAR tropospheric delay signals in areas with significant terrain variations. [ABSTRACT FROM AUTHOR]