Search

The debate on the role of vertical versus horizontal tectonism in Archean cratons is intimately linked to the initiation of plate tectonics. The dome-and-keel architecture has been considered as a consequence of vertical tectonism. Although such a structural pattern is documented in some Mesoarchean and older cratons, such as the Kaapvaal and Pilbara cratons, whether it also occurs in Neoarchean cratons is poorly constrained. Determining the kinematics, structural evolution, and the timing of these structures is crucial in understanding how the tectonic behavior operated during the evolution of the early Earth. The North China Craton, especially its eastern part, is a Neoarchean continental block and preserves typical greenstone- granite rock assemblages. Detailed structural mapping reveals that the Anziling area (east China) is characterized by a typical dome structure without significant reworking by later deformation. The dome is in tectonic contact with a supracrustal rock assemblage that is now the dip-slip Shuangshanzi ductile shear zone. In the supracrustal rocks, compositional layers are folded into upright isoclinal folds. Meanwhile, along the shear zone, foliation varies from NNW to SW with sub-vertical dip. Mineral stretching lineations indicate a sinistral shear sense with a slightly oblique-slip component in the north, but show NWW-directed and SW-directed steep dip-slip shear in the west and south, respectively. Kinematic indicators imply that the granitic dome formed through a vertically upward movement accompanied by an uneven clockwise rotation. The supracrustal rocks sank downwards to form the regional keel structure. Structural data suggests that the Anziling area is a typical dome-and-keel structure. U-Pb zircon dating on pre-, syn-, and post-tectonic dykes indicate that the dome-and-keel structure formed at 2530-2500 Ma, and was intimately related to the emplacement of tonalite-trondhjemite-granodiorite granitoids. New data from this study suggest that until the late Neoarchean, the vertical tectonism was still a dominant tectonic regime that was operating in the eastern North China Craton. [ABSTRACT FROM AUTHOR]

Qinghai-Tibet Plateau is one of the regions with the strongest crustal tectonic movement in the world due to its special continental tectonic location. There are many large active faults in the block and its surrounding areas, which are prone to strong earthquakes. The area is also a natural test site for studying the mechanism of plate tectonic movement in the continent. Global Positioning System(GPS)is widely used in the study of crustal deformation monitoring due to its high temporal and spatial resolution, wide coverage, and high observation accuracy. The high-resolution GPS crustal movement velocity field obtainedby China crustal movement observation network(CMONOC-Ⅰ)and China continental tectonic environment monitoring network(CMONOC-Ⅱ), has clearly revealed the crustal tectonic movement and deformation of Qinghai-Tibet Plateau in the past 20 years. The research progress of current crustal movement and deformation characteristics of Qinghai-Tibet Plateau was systematically summarized based on GPS monitoring data, and the GPS data sources, and high-precision data processing methods and strategies for monitoring the crustal movement of Qinghai-Tibet Plateau were reviewed. The influence of different reference data on the processing results of GPS velocity field was discussed, and the current analysis models for crustal movement and deformation of Qinghai-Tibet Plateau were comprehensively explained from kinematics and dynamics. The current tectonic movement and deformation characteristics were deeply analyzed from both the shallow and deep of Qinghai-Tibet Plateau based on the calculations of integrated model. From the perspective of tectonic dynamic mechanism of plate movement, the current regional dynamics background of Qinghai-Tibet Plateau and the uplift mechanism of the mount Qomolangma region under its influence were interpreted in detail. Finally, the results of crustal movement and deformation of Qinghai-Tibet Plateau using GPS technology were summarized, and the important development trend of crustal deformation monitoring of Qinghai-Tibet Plateau in the future was also prospected. [ABSTRACT FROM AUTHOR]

Abstract The Wuhai Basin is located in the northwestern corner of the Ordos Block. Analyzing the geometry, along with the kinematic and dynamic characteristics of the boundary fault, the Zhuozishan West Piedmont Fault (ZWPF), will elucidate the regional tectonic environment and guide earthquake prevention and disaster reduction projects. Six representative sites were selected for topographic measurements, from the northern, middle and southern parts. Displacements of the ZWPF were calculated by measuring the top surface elevation of a widely distributed lacustrine layer in the footwall from outcrops at each site, and from boreholes in the hanging wall. The vertical slip rate of the ZWPF was then calculated based on the displacement and age of the lacustrine layer. Three to four normal fault-controlled terraces have developed on the footwall of the ZWPF, and the top surface of the lacustrine layer is at 1092–1132 m elevation. Data from boreholes showed that the top surface of the lacustrine layer is at an elevation of 1042–1063 m in the hanging wall. Vertical slip rates since 70 ka were estimated as 0.5 ± 0.2 to 1.0 ± 0.2 mm/a. The highest rate of vertical slip was observed at Fenghuang Ridge, in the central part of the fault system, and decreased to the south. In the northern Wuhai Basin, normal faulting still controls the piedmont landscape. However, NW-SE trending reverse faults and secondary folding have resulted from dextral strike-slip movement of the fault. The Wuhai Basin developed as a dextral-tensional negative flower structure. This study indicates that stress conditions of the northwestern margin of the Ordos Block include NE–SW compression and NW–SE extension, and an S-shaped rift zone has dominated the scale, structure, and evolution of the Yinchuan, Wuhai, and Hetao Basins, along with the active mode of faulting in these basins. Highlights • Vertical slip rates between 0.5 ± 0.2 and 1.0 ± 0.2 mm/a were calculated for the ZWPF. • The ZWPF has a larger strike-slip rate, resulting in development of reverse faults. • The Wuhai Basin has developed a dextral- tensional negative flower structure. • Stress conditions and S-shaped distribution dominate the development of basins. [ABSTRACT FROM AUTHOR]

On January 21st, 2016, a Ms 6.4 earthquake hit Menyuan County, Qinghai province, China. The nearest known fault is the Leng Long Ling (LLL) fault which is located approximately 7 km north of the epicenter. This fault has mainly shown sinistral strike-slip movement since the late Quaternary Period. However, the focal mechanism indicates that it is a thrust earthquake, which is different from the well-known strike-slip feature of the LLL fault. In this study, we determined the focal mechanism and primary nodal plane through multi-step inversions in the frequency and time domain by using the broadband regional seismic waveforms recorded by the China Digital Seismic Network (CDSN). Our results show that the rupture duration was short, within 0–2 s after the earthquake, and the rupture expanded upwards along the fault plane. Based on these fault parameters, we then solve for variable slip distribution on the fault plane using the InSAR data. We applied a three-segment fault model to simulate the arc-shaped structure of the northern LLL fault, and obtained a detailed slip distribution on the fault plane. The inversion results show that the maximum slip is 0.43 m, and the average slip angle is 78.8°, with a magnitude of Mw 6.0 and a focal depth of 9.38 km. With the geological structure and the inversion results taken into consideration, it can be suggested that this earthquake was caused by the arc-shaped secondary fault located at the north side of the LLL fault. The secondary fault, together with the LLL fault, forms a normal flower structure. The main LLL fault extends almost vertically into the base rock and the rocks between the two faults form a bulging fault block. Therefore, we infer that this earthquake is the manifestation of a neotectonics movement, in which the bulging fault block is lifted further up under the compresso-shear action caused by the Tibetan Plateau pushing towards the northwest direction. [ABSTRACT FROM AUTHOR]

The northwestern margin of the Hetao Graben, North China, is bounded by a pronounced 160-km-long Langshan Piedmont fault (LPF). The kinematics and recent tectonic activity of this rift-border fault and its accommodated extensional strain can help us better assess the seismic potentials. In this study, on the basis of high-resolution satellite images, digital elevation models acquired by small unmanned aerial vehicles using structure-for-motion techniques, field observations, and radiocarbon (14C) age dating, we demonstrate that (1) the LPF is a Holocene active normal fault with an average dip of ~607; the extension rate is estimated to be ~0.4-0.7mm/y, lower than geodetic strain rate; (2) the ongoing tectonic activity along this fault has played a significant role in controlling the present topography of the Langshan Mountains and neighboring areas; (3) slip partitioning probably occurred in the western Hetao Graben; namely, normal slip dominated the basin-bounding faults, and right-lateral slip occurred on the buried faults within the flat-lying graben. We suggest that precisely determined fault slip rates and geometry are needed with the aim of further quantifying the extensional strain distribution. The results of this study would be helpful in achieving a better understanding of fault development and evolution in actively extending regions. [ABSTRACT FROM AUTHOR]

The North China Plate (NCP) underwent multi-phase intracontinental deformation during the Mesozoic, which is a much-debated research subject. Here we present a case study of this deformation inferred from regional-scale Helanshan superposed folds in the west of the NCP. New structural analyses and fault kinematic analyses in the Helanshan Structural Belt (HSB) indicate a two-stage syn-folding paleo-stress field, comprising early NNE–SSW compression, with mean orientations 190°/01° (plunge direction/plunge) for σ 1 , 283°/26° for σ 2 , and 100°/63° for σ 3 , and later WNW–ESE compression with mean orientations of σ 1 , σ 2 , and σ 3 at 124°/07°, 213°/04°, and 001°/75°, respectively. These results, combined with geochronological analysis, indicate two episodes of shortening in this belt during the Mesozoic. Late Triassic–Early Jurassic NNE–SSW shortening, which produced ∼8.1 km of horizontal shortening, led to the development of open WNW-trending fold structures. Subsequent Late Jurassic–Early Cretaceous WNW–ESE shortening, which produced ∼18.7 km of horizontal shortening, reshaped the early WNW-trending structures and generated close, overprinting NNE-trending folds that resulted in the development of the regional-scale superposed folds in this area. In terms of geodynamics, the early NNE–SSW shortening is likely to be related to Indosinian intercontinental convergence between the North China Plate and the Yangtze Plate, and the later WNW–ESE shortening is likely to have been related to subduction of the Paleo-Pacific Plate. The regional structural analysis indicates that the whole of the western North China Plate experienced two-phase contractional deformation during the Mesozoic, as manifest by the early NNE–SSW and the late WNW–ESE shortening that characterized Mesozoic intracontinental deformation in the western NCP. [ABSTRACT FROM AUTHOR]

The Shanxi Rift, an intracontinental belt along the eastern margin of the Ordos Block, North China Plate, has undergone multi-stage extensional deformation during the late Cenozoic. In this study, new fault kinematic analysis of boundary faults in the Shanxi Rift, constrained by geochronological data, defines a three-stage tectonic stress regime since the late Miocene, providing new structural evidence for deciphering the northeastward growth of the Tibetan Plateau. The earliest stage involved a transtensional stress regime of NW–SE extension and NE–SW compression in the late Miocene–early Pleistocene (ca. 10–1.8 Ma) and characterized by mean principal stress axes of σ 1 at 344.7°/87.2°, σ 2 at 217.6°/01.1°, and σ 3 at 128.1°/01.0°. The early transtensional stress regime was responsible for the opening of the Shanxi Rift and was very likely associated with intensive right-lateral pull-apart activity in the eastern Ordos Block due to the northeastward growth of the Tibetan Plateau. During the second stage, the stress regime changed to less intense NE–SW extension, with mean stress orientations of 323.3°/85.2° for σ 1 , 127.5°/02.9° for σ 2 , and 214.9°/02.6° for σ 3 in the early late Pleistocene (ca. 1.8–0.11 Ma). This stage is marked by a distinct shift from fluvio-lacustrine to fluvio-piedmont sedimentary facies at the end of the early Pleistocene, and the widespread eruption of basalt in the Datong Basin north of the Shanxi Rift. This short-lived extension appears to be the result of relaxation in the midst of crustal shortening during growth of the Tibetan Plateau. The third stage was transtensional, characterized by NNW–SSE extension and WNW–ESE compression ( σ 1 at 060°/88.9°, σ 2 at 074.9°/03.9°, and σ 3 at 164°/00°) since the late Pleistocene (ca. 0.11 Ma), causing dextral shear deformation in the Shanxi Rift and the disappearance of its paleo-lake. This stage resulted from regional ENE–WSW shortening due to northeastward growth of the Tibetan Plateau. [ABSTRACT FROM AUTHOR]

Convergent plate margins could have an immediate impact on intraplate deformation in the adjacent sedimentary basin. In the Tarim Basin, a strike-slip fault network in the Guchengxu High is adjacent to the Tethys (northern Tibetan Plateau). This paper uses high-quality 3-D seismic data to unravel the geometry and kinematics of the strike-slip fault network and the genetic relationship with the Tethys tectonics. Within the fault network, the left-lateral NNE- and ENE-oriented strike-slip faults are a result of sequential evolution rather than conjugate faults. The sub-vertical ENE-oriented strike-slip faults are widely spaced with stepping-segmented geometry in the west, whereas they are relatively clustered with larger vertical throws close to the Cherchen fault. They were interpreted as a series of the Cherchen fault-related structures due to oblique blocking of the Tazhong Uplift and block deflection. It responded to the Late Ordovician Altyn Tagh/Tarim collisional orogeny and the Cherchen fault. The NNE-oriented strike-slip faults are characterized by underlying sub-vertical faults and two layers of overlying normal faults. These NNE-oriented strike-slip faults have large transversal compressional components, commonly presenting reverse drags on both sides of the underlying sub-vertical faults. These NNE-oriented faults initiated on pre-existing discontinuities (extensional joints) and offset the ENE-oriented ones when NNW-oriented stress was transmitted to plate interiors during this Late Ordovician orogeny. Afterward, two layers of overlying normal faults formed due to dragging of the covers during the Middle Silurian–Early Carboniferous reactivation and the Late Carboniferous–Early Permian inversion, in response to subduction of the Kunlun Ocean and opening of the Paleo-Tethys Ocean, respectively. The strike-slip fault network in plate interiors evolved as immediate responses to the Tethys tectonics at plate boundaries. • The 3-D seismic data detailedly characterize the strike-slip fault network in the Guchengxu High. • The strike-slip fault network is a result of sequential evolution rather than a series of conjugate faults. • The strike-slip fault network in the Guchengxu High evolved in response to the Tethys tectonics at plate boundaries. [ABSTRACT FROM AUTHOR]

• Two stages of folds are identified on the northern margin of the North China Craton. • The D 1 folds were crossly superimposed by the D 2 folds and both formed in Paleozoic. • A dynamic transition occurred in middle Paleozoic in the northernNorth China Craton. Accretionary kinematic history of the Central Asia Orogenic Belt (CAOB) remains unclear in previous geological studies. Based on detailed structural analysis of newly identified folds on the northern margin of the North China Craton (NCC), we propose a tectonic model suggesting that Paleozoic accretion of the orogenic belt includes two phases of deformation. The first phase of deformation is oblique collision of the Bainaimiao Arc and the NCC, which was followed by orthogonal subduction of the Paleo-Asian Ocean in the second phase of deformation. The change of plate kinematics is supported by two generations of folding, namely D 1 (D B) and D 2 (D A). Both D 1 (D B) and D 2 (D A) folds developed in the Bayan Obo Group (BOG), a Meso- and Neoproterozoic rift sequence deposited on the passive continental margin of the NCC. D 1 (D B) folds were superimposed by the east-west trending D 2 (D A) folds. The D 1 (D B) folds developed as a result of oblique collision of the Bainaimiao arc and the NCC. The D 2 (D A) folds developed in response to the southward orthogonal subduction of the Paleo-Asian Ocean Plate. They formed between latest Silurian and Early Permian, coeval with the two accretion events at the northern edge of the NCC. Our study suggests that multiphase deformation of sedimentary layers on the subducting plates provide important constraints for kinematic evolution of plate tectonics. [ABSTRACT FROM AUTHOR]