Search

Polysaccharide-based magnetic nanocomposites can eminently illuminate several attractive features as anticancer drug carriers. In this study, rice straw-based cellulose nanowhisker (CNW) was used as solid support for Fe 3 O 4 nanofillers to synthesize magnetic CNW. Then, cross-linked chitosan-coated magnetic CNW for 5-fluorouracil carrier abbreviated as CH/MCNW/5FU. Fourier-transform infrared, X-Ray diffraction, and X-ray photoelectron spectroscopy analysis indicated successful fabrication and multifunctional properties of the CH/MCNW/5FU nanocomposites. In addition, CH/MCNW/5FU nanocomposites showed hydrodynamic diameter and zeta potential value of 181.31 ± 3.46 nm and +23 ± 1.8 mV, respectively. Based on images of transmission electron microscopy, magnetic CNW as reinforcement was coated with chitosan to obtain almost spherical CH/MCNW/5FU nanocomposites with an average diameter of 37.16 ± 3.08. The nanocomposites indicated desired saturation magnetization and thermal stability, high drug encapsulation efficiency, and pH-dependent swelling and drug release performance. CH/MCNW/5FU nanocomposites showed potent killing effects against colorectal cancer cells in both 2D monolayer and 3D spheroid models. These findings suggest CH/MCNW as a potential carrier for anticancer drugs with high tumour-penetrating capacity., Competing Interests: Declaration of competing interest We have no conflicts of interest to disclose., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Magnetic polymer nanocomposites are inherently multifunctional and harbor assorted physiochemical actions for applications thereof as novel drug nanocarriers. Herein, Fe 3 O 4 -nanoparticles were supported on rice straw cellulose for 5-fluorouracil carrier abbreviated as MC/5-FU for potential colorectal cancer treatments. Several analyses indicated the multifunctional properties of MC/5-FU bionanocomposites. Transmission and scanning electron microscopy study demonstrated that Fe 3 O 4 nanofillers covered the cellulose matrix. The drug release from MC/5-FU was evaluated under various pH and temperature conditions, showing the maximum release at pH 7.4 and 44.2 °C. In in vitro anticancer assay, MC/5-FU exhibited enhanced selectivity and anticancer actions against 2D monolayer and 3D tumour spheroid models colorectal cancer cells. The anticancer effects of MC/5-FU with magnetic targeting and heat induction were also examined. This easily synthesized MC/5-FU indicated the potential in application as a low-cost drug formulation for colorectal cancer treatments., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Discovery of a novel anticancer drug delivery agent is important to replace conventional cancer therapies which are often accompanied by undesired side effects. This study demonstrated the synthesis of superparamagnetic magnetite nanocomposites (Fe 3 O 4 -NCs) using a green method. Montmorillonite (MMT) was used as matrix support, while Fe 3 O 4 nanoparticles (NPs) and carrageenan (CR) were used as filler and stabilizer, respectively. The combination of these materials resulted in a novel nanocomposite (MMT/CR/Fe 3 O 4 -NCs). A series of characterization experiments was conducted. The purity of MMT/CR/Fe 3 O 4 -NCs was confirmed by X-ray diffraction (XRD) analysis. High resolution transmission electron microscopy (HRTEM) analysis revealed the uniform and spherical shape of Fe 3 O 4 NPs with an average particle size of 9.3 ± 1.2 nm. Vibrating sample magnetometer (VSM) analysis showed an M s value of 2.16 emu/g with negligible coercivity which confirmed the superparamagnetic properties. Protocatechuic acid (PCA) was loaded onto the MMT/CR/Fe 3 O 4 -NCs and a drug release study showed that 15% and 92% of PCA was released at pH 7.4 and 4.8, respectively. Cytotoxicity assays showed that both MMT/CR/Fe 3 O 4 -NCs and MMT/CR/Fe 3 O 4 -PCA effectively killed HCT116 which is a colorectal cancer cell line. Dose-dependent inhibition was seen and the killing was enhanced two-fold by the PCA-loaded NCs (IC 50 -0.734 mg/mL) compared to the unloaded NCs (IC 50 -1.5 mg/mL). This study highlights the potential use of MMT/CR/Fe 3 O 4 -NCs as a biologically active pH-responsive drug delivery agent. Further investigations are warranted to delineate the mechanism of cell entry and cancer cell killing as well as to improve the therapeutic potential of MMT/CR/Fe 3 O 4 -NCs.

Superparamagnetic magnetite nanocomposites (Fe 3 O 4 -NCs) were successfully synthesized, which comprised of montmorillonite (MMT) as matrix support, Kappaphycus alvarezii (SW) as bio-stabilizer and Fe 3 O 4 as filler in the composites to form MMT/SW/Fe 3 O 4 -NCs. Nanocomposite with 0.5 g Fe 3 O 4 (MMT/SW/0.5Fe 3 O 4 ) was selected for anticancer activity study because it revealed high crystallinity, particle size of 7.2 ± 1.7 nm with majority of spherical shape, and M s  = 5.85 emu/g with negligible coercivity. Drug loading and release studies were carried out using protocatechuic acid (PCA) as the model for anticancer drug, which showed 19% and 87% of PCA release in pH 7.4 and 4.8, respectively. Monolayer anticancer assay showed that PCA-loaded MMT/SW/Fe 3 O 4 (MMT/SW/Fe 3 O 4 -PCA) had selectivity towards HCT116 (colorectal cancer cell line). Although MMT/SW/Fe 3 O 4 -PCA (0.64 mg/mL) showed higher IC 50 than PCA (0.148 mg/mL) and MMT/SW/Fe 3 O 4 (0.306 mg/mL, MMT/SW/Fe 3 O 4 -PCA showed more effective killing towards tumour spheroid model generated from HCT116. The IC 50 for MMT/SW/Fe 3 O 4 -PCA, MMT/SW/Fe 3 O 4 and PCA were 0.132, 0.23 and 0.55 mg/mL, respectively. This suggests the improved penetration efficiency and drug release of MMT/SW/Fe 3 O 4 -PCA towards HCT116 spheroids. Moreover, concentration that lower than 2 mg/mL MMT/SW/Fe 3 O 4 -PCA did not result any hemolysis in human blood, which suggests them to be ideal for intravenous injection. This study highlights the potential of MMT/SW/Fe 3 O 4 -NCs as drug delivery agent., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Rice straw/magnetic nanocomposites (RS/Fe3O4-NCs) were prepared via co-precipitation method for removal of Pb(II) and Cu(II) from aqueous solutions. Response surface methodology (RSM) was utilized to find the optimum conditions for removal of ions. The effects of three independent variables including initial ion concentration, removal time, and adsorbent dosage were investigated on the maximum adsorption of Pb (II) and Cu (II). The optimum conditions for the adsorption of Pb(II) and Cu(II) were obtained (100 and 60 mg/L) of initial ion concentration, (41.96 and 59.35 s) of removal time and 0.13 g of adsorbent for both ions, respectively. The maximum removal efficiencies of Pb(II) and Cu(II) were obtained 96.25% and 75.54%, respectively. In the equilibrium isotherm study, the adsorption data fitted well with the Langmuir isotherm model. The adsorption kinetics was best depicted by the pseudo-second order model. Desorption experiments showed adsorbent can be reused successfully for three adsorption-desorption cycles.

Modified rice straw/Fe3O4/polycaprolactone nanocomposites (ORS/Fe3O4/ PCL-NCs) have been prepared for the first time using a solution casting method. The RS/Fe3O4-NCs were modified with octadecylamine (ODA) as an organic modifier. The prepared NCs were characterized by using X-ray powder diffraction (XRD), Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), Thermogravimetric analysis (TGA) and Fourier transform infrared spectroscopy (FT-IR). The XRD results showed that as the intensity of the peaks decreased with the increase of ORS/Fe3O4-NCs content in comparison with PCL peaks, the Fe3O4-NPs peaks increased from 1.0 to 60.0 wt. %. The TEM and SEM results showed a good dispersion of ORS/Fe3O4-NCs in the PCL matrix and the spherical shape of the NPs. The TGA analysis indicated thermal stability of ORS/Fe3O4-NCs increased after incorporation with PCL but the thermal stability of ORS/Fe3O4/PCL-NCs decreased with the increase of ORS/Fe3O4-NCs content. Tensile strength was improved with the addition of 5.0 wt. % of ORS/Fe3O4-NCs. The antibacterial activities of the ORS/Fe3O4/PCL-NC films were examined against Gram-negative bacteria (Escherichia coli) and Gram-positive bacteria (Staphylococcus aureus) by diffusion method using nutrient agar. The results indicated that ORS/Fe3O4/PCL-NC films possessed a strong antibacterial activity with the increase in the percentage of ORS/Fe3O4-NCs in the PCL.

Abstract A massive release of harmful substances especially heavy metal ions and dyes to the environment has been a major concern due to many people disregards the proper protocols in the waste management. The freshwater supplies are threatened and huge discharge of pollutants result from various anthropogenic activities may pose a major threat to the living organisms and negatively affect the ecosystem stability. This article reviews the development of magnetic iron oxide nanocomposites for removal of heavy metal ions and dyes from water. The highlight will be focused on current research activities for controlled size and dispersion of magnetic iron oxide nanoparticles within solid matrices including zeolites, silica, clays, carbon, activated carbon, graphene and graphene oxide. The magnetic properties of the nanocomposites will be evaluated to determine whether they possessed sufficient magnetization for easy separation by an external magnet. The unique features of the synthesized materials will be investigated along with their application in the removal of heavy metal ions and dyes. The advantages and limitations of the magnetic nanocomposites will be highlighted to determine their adsorption ability. The effect of various parameters such as pH, contaminants concentration, adsorbent dosage, contact time and temperature will be summarized to identify the best condition for effective pollutants removal. Graphical abstract Image 1 Highlights • Synthesis, properties and application of magnetic iron oxide NCs for the adsorption of heavy metal ions and dyes. • Methods for the preparation of magnetic iron oxide NCs with control over the size, morphology and the magnetic properties. • Factors affecting the adsorption of heavy metal ions and dyes in water by magnetic iron oxide NCs. • Influence of the iron oxide loading and specific surface area of NCs on removal of heavy metal ions and dyes in water. [ABSTRACT FROM AUTHOR]

This paper presents a green, facile and rapid method to prepare magnetite/zeolite-nanocomposites (NCs) in one step procedure at ambient temperature. The powder X-ray diffraction (PXRD) pattern of iron oxide nanoparticles (NPs) with the sole zeolite showed the broadening of zeolite peaks attributed to the incorporation of Fe 3 O 4 . Field-emission scanning electron microscopy (FESEM) analysis depicted that the Fe 3 O 4 ‒NPs were formed on the surface of porous zeolite framework. Transmission electron microscopy (TEM) analysis displayed the Fe 3 O 4 nanoparticles (NPs) were mostly in spherical shape with a mean diameter and standard deviation of 2.40 ± 0.41 nm. The selected-area electron diffraction (SAED) pattern confirmed the presence of cubic Fe 3 O 4 phase. The vibrating sample magnetometer (VSM) results indicated the as-synthesized sample has a saturation magnetization of around 6.52 emu g −1 . The magnetite/zeolite-NCs can be considered as a low-cost alternative catalyst for oxygen reduction reaction (ORR) process. The electrochemical measurement showed that the performance of magnetite/zeolite-NCs towards the ORR increased as the scan rate increased from 20 mV s −1 to 500 mV s −1 . The ORR is a diffusion-controlled process in the alkaline medium. [ABSTRACT FROM AUTHOR]

The purpose of this study was to investigate the effect of OH concentration on the size of Fe3O4 nanoparticles (Fe3O4-NPs). Fe3O4-NPs with different cubic nanocrystal structure and percentage Fe3O4 content were successfully prepared, by use of the chemical co-precipitation method, on the exterior surface of talc, as solid substrate, by an environmentally friendly process. Ferric chloride, ferrous chloride, and sodium hydroxide were used as iron oxide precursors and reducing agent. The results showed that the morphology of the Fe3O4-NPs can be adjusted by changing the reaction conditions, for example volume of reducing agent and concentration of iron salts. Different size, dispersal, and the magnetic properties were obtained by changing the concentration of iron salts and NaOH. The products were characterized by powder X-ray diffraction, scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, and Fourier-transform infrared spectroscopy. The reaction was conducted in a non-oxidizing, oxygen-free environment. Because the interlamellar spacing of the talc was almost unchanged (ds = 0.94-0.87 nm), the Fe3O4-NPs were formed on the exterior surface of the talc. The average diameter of the Fe3O4-NCs could be varied from 6.62-8.13 nm in adjusting the concentration of NaOH. The size of the nanoparticles decreased as the amount of reducing agent was increased. These talc-Fe3O4nanocomposites (talc-Fe3O4-NCs) may have potential applications in the chemical and biological industries. [ABSTRACT FROM AUTHOR]