Search

Mo2 FeB2 is a good boron based cermet material with high temperature resistance, wear resistance and high strength. It has broad application in the field of mould. The structural stability, elastic properties, hardness and electronic structure of Mo2 FeB2 with Nb alloying were investigated by using first-principles calculations. The calculated cohesive energy and formation enthalpy showed that Nb prefers to occupy the Fe site of Mo2 FeB2, and the Nb at Fe site of Mo2 FeB2 possesses better mechanical properties compared with that at Mo site. Moreover, the calculated results showed that Nb doping could increase the shear modulus, Young’s modulus, bulk modulus and hardness, but slightly decrease the ductility. The suitable doping concentration should be 2.5 at. %. The calculated electronic structure indicated that the increase of mechanical properties is attributed to the formation of Nb-B covalent bonds. [ABSTRACT FROM AUTHOR]

Copyright of China Forest Products Industry is the property of China Forest Products Industry Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Journal of Hebei University of Science & Technology is the property of Hebei University of Science & Technology, Journal of Hebei University of Science & Technology and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Journal of Hebei University of Science & Technology is the property of Hebei University of Science & Technology, Journal of Hebei University of Science & Technology and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Refractories / Naihuo Cailiao is the property of Naihuo Cailia (Refractories) Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Refractories / Naihuo Cailiao is the property of Naihuo Cailia (Refractories) Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The dynamic change of water level in a hydrological year can keep riverbank soil in the state of alternating dry and wet. The variety of water content of riverbank soil can change the mechanical properties of soil to a certain extent, which can affect riverbank stability. In order to investigate quantitatively the influence of dry-wet alternation condition on mechanical properties of riverbank clay soil, a field observation and sampling were first conducted at eight typical riverbanks in upper and lower Jingjiang Reach, which the clay soil of the typical riverbanks in Jingjiang Reach of the Yangtze River was taken as the study object. Through a comprehensive analysis of measured data, indoor soil tests and BSTEM simulation, the composition and mechanical properties of these samples were obtained, which indicated that the vertical soil composition of riverbank was characterized by a typical composite structure of non-cohesive lower bank and cohesive upper bank. The indoor soil test results revealed the quantitative change of soil mechanics with dry-wet alternation condition, and a close relationship between water content and shear strength indicators was obtained. With an increase of water content, the cohesion first increased and then decreased, with the peak values of 21 kPa and 34 kPa for the critical water content of 16.0% and 22.8% at Jing 61 and Beimenkou sections, and eventually reached a constant, while internal friction angel decreased significantly. Considering the dry-wet alternation condition of riverbank soil and the change of river water level in a hydrological year, the degrees of riverbank stability at Jing 61 and Beimenkou sections were analyzed during four different water level periods using BSTEM, and the process of bank failure of two sections were simulated in 2013. The results indicated that: the model-predicted results of the total bank retreat width were in close agreement with the measured data with the relative errors 1.69% and 3.74%, respectively. At the same time, the safety factors under different dry and wet conditions were calculated based on the BSTEM simulated results of two typical sections. The relationship between safety factor and water content was obtained, which indicated the safety factor first increased and then decreased with an increase of water content. It was consistent with the relationship between soil cohesive and water content which proved that the soil cohesive has an important influence on the stability of river bank. Quantitative relationships between safety factors and cohesive and internal friction angle of two typical sections were identified, respectively, and the correlation coefficients were 0.980 and 0.876 for Jing 61 section, and 0.992 and 0.986 for Beimenkou section, respectively. The relationships between them were linear function from which the safety factors increased with the increase of the cohesive and internal friction angle, respectively. Thus, a conclusion can be drawn that the safety factor was mainly affected by soil cohesive under different dry and wet conditions. For actual project, when water content of the riverbank soil was obtained, the cohesive and internal friction angle of soil can be calculated by proposed formulas, thereby the safety factor of riverbank can be calculated and the stability of river bank can be identified. [ABSTRACT FROM AUTHOR]