Search

Contact shots to the head often leave behind biological traces inside firearm barrels, a phenomenon of great forensic interest. Until now, the visualization and preservation of these traces presented a significant challenge, lacking a reliable method. This study addresses this gap by searching for a suitable method to extract the traces within a casting. Using alginate or gelatine as suitable materials, the results were hampered by serious adhesion issues and their extraction out of the firearm barrel was impeded. Finally, the combination of 11% gelatine with 1% alginate, introduced into the barrel around a 'central spine', succeeded to consistently produce replicable castings. Experimental contact shots displayed a distinct staining gradient from the muzzle to the rear of the barrel, as revealed through endoscopy and proved in the macroscopic casting. The technique proved effective for various common handgun barrels and successfully preserved blood and gunshot residue (GSR) patterns within the barrel. This method offers the dual benefits of visually mapping staining patterns and securing localized samples for targeted molecular genetic analysis in forensic investigations., (© 2024. The Author(s).)

Gunshot residues (GSRs) play an important role in forensic investigations of gun-related violence. The presence of GSRs has been described to help to identify the bullet entry area, as it was supposed not to be found at exit wounds. This report details the suicidal headshot of an 84-year-old male where unburned tube-like, cuboid and flake-formed powder particles have been found not only at the inside of the muzzle but also circular around the exit wound. With very short-barrelled weapons, it must be expected that part of the propellant charge leaves the barrel unburned behind the bullet. In contrast to that, the barrel length of the used weapon should lead to a complete burn-up of powder particles. The surprisingly large number of unburned powder particles present at the exit wound of the injury gave reason for further investigation to understand the underlying ballistic aspects and outlines the importance of having a close look at incidence scene photos during an investigation., (© 2022. The Author(s).)

Background: Approximately, 80% of civilian cranial gunshot injuries in India are mainly due to unlicensed mostly country-made guns, called the "Desi-Kattas," manufactured by the traditional gunsmiths. These injuries constitute a unique subgroup, with respect to the make and design along with the unique wound ballistics compared to the factory-made firearms., Objective: This study is aimed at defining the prognostic factors in predicting the outcomes related to cranial gunshot injuries due to these desi-kattas., Methods: Ten patients with kata-related cranial gunshot injury underwent surgical intervention at our institution, between 2014 and 2018. Their clinical status, imaging features, and outcomes were retrospectively analyzed., Results: Ten patients with kata-related gunshot injuries to the head were identified. Homicidal injuries were documented in six cases. Five had a GCS of 13-15 at presentation. Exit wounds were noted in 50% of the suicidal cases. Multilobar involvement was seen in 70% of cases, with the bullet crossing the midline in only 40% cases. Decompressive craniectomy was required in five cases. Eight patients had a Glasgow Outcome Score of four or more at 6 months of follow-up. There was one death during the follow-up period, while the other patient remains to be in vegetative state., Conclusion: The Katta-related cranial injuries constitute low-muzzle velocity injuries with the majority of the patients sustaining nonfatal injuries, especially homicidal. The presence of positive CT findings and the crossing of the bullet across the midline on CT brain predicts dismal prognosis. Optimal neurosurgical approach should consist of minimal local debridement and attain water seal dural closure., Competing Interests: None

Firearm injuries are a preventable epidemic in the USA. Extremities are commonly affected in gunshot injuries. Such injuries may be complex with concomitant osseous, soft tissue, and neurovascular components. The maximum wounding potential of a projectile is determined by its kinetic energy and the proportion of the kinetic energy that is transmitted to the target. Accurate assessment of ballistic injuries is dependent on utilizing the principles of wound ballistics, accurate bullet count, and ballistic trajectory analysis. The goals of this article are to review wound ballistics and the imaging evaluation of extremity civilian firearm injuries in the adult population, with emphasis on ballistic trajectory analysis, specific ballistic fracture patterns, and diffuse, secondary soft tissue ballistic injuries., (© 2021. ISS.)

Forensic recovery from fired ammunition casings remains one of the most challenging tasks during high-profile investigations. Often, the decision must be made between screening for DNA or fingerprints, and, in doing so, the impact these processes will have on the examination of ballistic markings imparted on the ammunition from the firearm itself. Traditionally, fingermark enhancement processes have yielded low success rates in their efforts to identify suspects by enhancing friction ridge detail left on the cartridge casings. Moreover, the enhancement methods utilised may often induce detrimental physical changes to the casing(s), rendering them unsuitable for subsequent ballistics (marking) examination. Recently, new technology has been shown to increase the success rate of fingermark recovery from fired ammunition, and the growing adoption of such innovation means that new challenges are encountered to maximise evidence recovery and streamline forensic workflows. One such example arises from the potential obscuration of the ammunition headstamp area during such treatments. Accordingly, this study outlines the preliminary investigations and developments of a polymer mask substrate that serves to protect the headstamp of fired ammunition casings during relevant fingermark enhancement processes. The technique also has the capacity to be used as a surface protection device to eliminate unwanted chemical deposition across other areas of interest and evidence types., (Copyright © 2022 The Chartered Society of Forensic Sciences. Published by Elsevier B.V. All rights reserved.)

Worldwide advances in computer techniques are not yet recognised in the practice of forensic medicine. A promising application is their use in making a three-dimensional reconstruction of the crime scene. This study analyses this technique in a homicide by firearm. Queries regarding the direction and number of shots, position of the victim inside the car when shot at and presence of the accused at the crime scene were answered by a scientific model. Similar reconstruction of the scene, nailing the accused in a heinous crime, has not previously been reported as a study or a case. The paper anticipates impetus to the growth of literature in criminology and forensic sciences. It will also expedite the delivery of justice based on scientific evidence in controversial causes of death.

Black powder weapons are rarely used in countries where access to firearms is easy. Poland has a fairly restrictive law regarding possession of firearms but under the Weapons and Munitions Act of May 21, 1999, as further amended, the possession of black powder weapons using separate loaded ammunition and manufactured before 1885, or replicas thereof, is legal without a permit. When the amendment was introduced, forensic pathologists anticipated a rush of cases involving such weapons, mainly suicides, but also accidents and homicides, but in our own practice in Lodz over the past 10 years (2010-2019) we have encountered only 7 such cases. Although the number is not particularly high, it does nevertheless account for nearly one-fifth of all gunshot deaths in the area. The aim of this paper is to present a series of deaths involving the use of black powder handguns. In analyzed cases, the victims were mostly men, they were sober, and their manner of death was suicide. As far as age was concerned, no regularity was found. All black powder handgun shots were characteristic enough in comparison with those from conventional firearms that they could be identified easily-the entrance wounds were larger than usual, there was a lot of gunpowder around them and in the wound canal, the bone fractures were extensive. Analysis of the literature and of our own material indicates that easy availability is not the only factor affecting the choice of a weapon; ease of use and reliability are also important., (© 2020 American Academy of Forensic Sciences.)

Introduction: Health care workers are vulnerable to workplace violence, including active shooter incidents. Little is known about how firearms could damage monoplace chamber acrylic and whether a breached pressurized chamber presents additional threat to the patient or bystanders., Methods: In a remote area where firearm discharge is permitted, we tested the durability of sections of monoplace hyperbaric chamber acrylic under various firearm discharges. Firearms were discharged at acrylic sections from a distance of 17 feet at 45 degrees and 10 degrees from perpendicular while wearing protective gear. Firearm calibers ranged from .22 caliber handgun to 5.56 mm AR-15 rifle. We also conducted similar testing on a monoplace hyperbaric chamber pressurized with >99% oxygen to a differential pressure of 14.7 psig (2.0 atmospheres absolute at sea level). Handguns were remotely fired at a distance of 12 feet from the chamber (30 degrees from perpendicular), while the rifles were fired at a distance of 60 feet from the chamber., Result: Higher-caliber handguns penetrated or fractured the acrylic sections only after multiple shots. The tested rifles caused full-thickness penetration and fracture with a single shot. However, the pressurized monoplace hyperbaric chamber required two shots from the AR-15 rifle, separated by approximately 60 mm, to penetrate the acrylic, resulting in rapid depressurization. The chamber otherwise remained intact, with no explosion or conflagration observed., Conclusion: An intact or pressurized chamber performs differently than stand-alone acrylic sections under firearms testing. In a worst-case active shooter scenario, the pressurized monoplace chamber tested posed no additional threat to bystanders beyond the significant risk of ricochet., Competing Interests: The authors of this paper declare no conflicts of interest exist with this submission., (Copyright© Undersea and Hyperbaric Medical Society.)

From time to time, severe or fatal injuries caused by small caliber air rifle projectiles are seen. In forensic sciences, the theoretical wounding potential of these weapons and projectiles is widely known. Usually, shots against the skull were reported and, in these cases, penetrating the eyes or thin bone layers of the temporal region. Amongst a huge number of different projectiles available for air guns, sub-caliber 4.4-mm (.173) caliber steel ball projectiles were used in an unusual suicide case. This case led to fundamental questions concerning wound ballistics. An 82-year-old man shot once against his right temporal region and twice into his mouth with a 4.5-mm (.177) caliber air rifle. Because of the exceptionally deep penetration of the base of the skull and the use of spherical-shaped sub-caliber air rifle projectiles, terminal ballistic features were analyzed and compared to results published in forensic literature. Test shots using the same weapon and similar projectiles were fired into ballistic gelatin to measure and calculate basic wound ballistic variables of cal. 4.4-mm (.173) steel balls. In comparison, further test shots with cal. 4.5-mm (.177) steel balls BB (ball bearing), flat-headed and pointed air rifle pellets ("diabolos") were carried out. The theoretical penetration depth in solid bone was calculated with 36.4 mm, and test shots in gelatin from hard contact produced an on-average wound track of 120 mm underlining the potential wounding effect. Furthermore, spherical projectiles could roll back and forth within the barrel, and an air cushion between projectile and breechblock can reduce muzzle velocity by more than half, explaining the retained missile in the temporal region.

A study was undertaken wherein different fingermark developers were evaluated for the recovery of fingermarks from brass cartridge cases, besides the evaluation of factors such as firing effects and surface characterization of the cases. The latent fingermarks on α-brass plates, fired and unfired cartridge cases were deposited and aged for 1-14days before development with different developers. In order to mimic the fired cartridge case conditions, the brass plates were heated and examined at room temperature (RT), at 63 and at 200°C. The sequential treatment with cyanoacrylate, gun blue and fluorescent dye has been found to be the best among other developers for the recovery of latent fingermarks on brass surfaces including fired and unfired cartridge cases. Cartridge cases and other brass surfaces were also analyzed by surface characterization methods, including X-ray diffraction, scanning electronic microscopy, energy dispersive X-ray spectroscopy and metallographic examination. The tested surfaces correspond to α-phase brass Cu 0.7 Zn 0.3 composition and have shown different surface morphologies (such as grain structure) and different levels of oxidation, even for cartridge cases obtained from the same batch. Due to this, the effectiveness of a given reagent for a specific brass surface is uncertain. Therefore, the application of the entire tested sequence of developers is strongly recommended. Further, the effects of firing on fingermarks on cartridge cases were examined, and the results indicated that the blowback of hot gases through the looseness between cartridge case and chamber wall of the firearm is the main cause responsible for deterioration of fingermarks during firing. Despite the recognized damage caused to fingermarks by the firing effects, good quality fingermarks were recovered from fired cartridge cases in which full fingermarks were intentionally deposited prior to firing. This indicates that the handling of the cartridges before and during the loading of the gun may have a strong influence on the quantity and quality of fingermarks, and that the firing itself is not the main responsible factor for the absence or low quality of fingermarks, as frequently reported in fired cartridge cases studies., (Copyright © 2018 Elsevier B.V. All rights reserved.)

The Congruent Matching Cells (CMC) method was invented at the National Institute of Standards and Technology (NIST) for accurate firearm evidence identification and error rate estimation. The CMC method is based on the principle of discretization. The toolmark image of the reference sample is divided into correlation cells. Each cell is registered to the cell-sized area of the compared image that has maximum surface topography similarity. For each resulting cell pair, one parameter quantifies the similarity of the cell surface topography and three parameters quantify the pattern congruency of the registration position and orientation. An identification (declared match) requires a significant number of CMCs, that is, cell pairs that meet both similarity and pattern congruency requirements. The use of cell correlations reduces the effects of "invalid regions" in the compared image pairs and increases the correlation accuracy. The identification accuracy of the CMC method can be further improved by considering a feature named "convergence," that is, the tendency of the x-y registration positions of the correlated cell pairs to converge at the correct registration angle when comparing same-source samples at different relative orientations. In this paper, the difference of the convergence feature between known matching (KM) and known non-matching (KNM) image pairs is characterized, based on which an improved algorithm is developed for breech face image correlations using the CMC method. Its advantage is demonstrated by comparison with three existing CMC algorithms using four datasets. The datasets address three different brands of consecutively manufactured pistol slides, with significant differences in the distribution overlap of cell pair topography similarity for KM and KNM image pairs. For the same CMC threshold values, the convergence algorithm demonstrates noticeably improved results by reducing the number of false-positive or false-negative CMCs in a comparison., (Published by Elsevier B.V.)

Amongst hundreds of different projectiles for air guns available on the market, hollow-point air gun pellets are of special interest. These pellets are characterized by a tip or a hollowed-out shape in their tip which, when fired, makes the projectiles expand to an increased diameter upon entering the target medium. This results in an increase in release of energy which, in turn, has the potential to cause more serious injuries than non-hollow-point projectiles. To the best of the authors' knowledge, reliable data on the terminal ballistic features of hollow-point air gun projectiles compared to standard diabolo pellets have not yet been published in the forensic literature. The terminal ballistic performance (energy-dependent expansion and penetration) of four different types of .177 caliber hollow-point pellets discharged at kinetic energy levels from approximately 3 J up to 30 J into water, ordnance gelatin, and ordnance gelatin covered with natural chamois as a skin simulant was the subject of this investigation. Energy-dependent expansion of the tested hollow-point pellets was observed after being shot into all investigated target media. While some hollow-point pellets require a minimum kinetic energy of approximately 10 J for sufficient expansion, there are also hollow-point pellets which expand at kinetic energy levels of less than 5 J. The ratio of expansion (RE, calculated by the cross-sectional area (A) after impact divided by the cross-sectional area (A 0 ) of the undeformed pellet) of hollow-point air gun pellets reached values up of to 2.2. The extent of expansion relates to the kinetic energy of the projectile with a peak for pellet expansion at the 15 to 20 J range. To conclude, this work demonstrates that the hollow-point principle, i.e., the design-related enlargement of the projectiles' frontal area upon impact into a medium, does work in air guns as claimed by the manufacturers.

In firearm examiners' and forensic specialists' casework as well as in air gun proof testing, reliable measurement of the weapon's muzzle velocity is indispensable. While there are standardized and generally accepted procedures for testing the performance of air guns, the method of seating the diabolo pellets deeper into the breech of break barrel spring-piston air guns has not found its way into standardized test procedures. The influence of pellet seating on the external ballistic parameters was investigated using ten different break barrel spring-piston air guns. Test shots were performed with the diabolo pellets seated 2 mm deeper into the breech using a pellet seater. The results were then compared to reference shots with conventionally loaded diabolo pellets. Projectile velocity was measured with a high-precision redundant ballistic speed measurement system. In eight out of ten weapons, the muzzle energy increased significantly when the pellet seater was used. The average increase in kinetic energy was 31 % (range 9-96 %). To conclude, seating the pellet even slightly deeper into the breech of spring-piston air guns might significantly alter the muzzle energy. Therefore, it is strongly recommended that this effect is taken into account when accurate and reliable measurements of air gun muzzle velocity are necessary.

Based on its intrinsic mass and velocity, a bullet has an upper limit of wounding potential. Actual wound severity is a function of the bullet construction and trajectory, as well as the properties of the tissues traversed. Interpreting physicians must evaluate the bullet trajectory and describe patterns of injury resulting from the effect of energy transfer from the projectile into living tissue. A basic understanding of firearms, projectiles, and wound ballistics can help the interpreting physicians in conceptualizing these injuries and interpreting these cases., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

The use of non-lethal weapons has spread worldwide, being introduced as an alternative to firearms in many countries such as the United States or the United Kingdom. Among non-lethal weapons, conducted electrical weapons have been adopted worldwide, to control unruly suspected criminals or to neutralise violent situations. The stun gun belongs to this category and is the most widely available, with more than 140,000 units in use by police officers in the field in the US, and an additional 100,000 electrical stun guns owned by civilians worldwide. In Italy, the use of conducted electrical weapons by law enforcement has only recently been introduced, with private use and commercialisation still prohibited, mainly due to controversies related to the potential dangers of such devices. Before the official adoption, several experiments had to be carried out, with mechanisms that reproduced the ballistics of the stun gun. Here we present the case of a man who suffered a self-injury trauma to his hand during a ballistics exercise with a crossbow loaded with stun gun probes. [ABSTRACT FROM AUTHOR]

In examining deaths resulting from gunshot wounds, it is important to describe the wound pathway created by the projectile. Forensic pathologists must identify all entrance and exit wounds and account for all projectiles. Occasionally, confusion arises as to whether a skin defect represents an entrance wound or not, an exit wound, or some other type of wound. Herein, we propose the descriptor "bullet track skin defect" as a formal description for a superficial skin defect created along the pathway of a projectile within the body. Specifically, we define the "bullet track skin defect" as a partial‐ or full‐thickness skin defect produced by a projectile traveling beneath the skin in a relatively tangential fashion as part of a wound pathway within the body. It is somewhat analogous to a traditional graze or superficial tangential wound, wherein the projectile traveling outside the body strikes the skin tangentially from above, without entering the body. However, the projectile is already traveling within the body with the bullet track skin defect, disrupting the skin tangentially from below rather than from above, without exiting the body. Although these defects are not a common presentation of gunshot wounds, they are certainly not rare. With this case series, we suggest that such defects may be referred to as "bullet track skin defects." Alternative language that can substitute for "bullet track skin defects" includes "bullet track skin wounds" or "bullet track cutaneous defects." [ABSTRACT FROM AUTHOR]

A mathematical simulation of the internal ballistics of a shot from a gun, depending on the design of the charge of the gun, has been performed. A general system of equations defining the unsteady movement of a two-phase gas–powder mixture in the channel of the barrel of a gun in the one-dimensional approximation is presented. Results of simulation of a shot from a gun charged with tubular powder or chopped powder are presented. The influence of the gradual ignition of a powder in a gun and of its nonstationary and erosion burning in it on the parameters of the ballistic process in the gun and the influence of the mass and disposition of an igniter in the gun on the dynamics of a shot from it were investigated. [ABSTRACT FROM AUTHOR]

In the era of unmanned war, with the increasing muzzle velocity requirement, the design of gun is significantly restricted by recoil, especially for guns installed on unmanned aerial vehicles. A recoilless gun with combustible cartridge was designed to eliminate recoil and increase projectile velocity, and the influence of main parameters on recoil was studied. First, a design of a recoilless gun with high projectile velocity is proposed based on combustible cartridge case. Next, a classical interior ballistic model is developed during the recoilless gun firing cycle, and the effect of main parameters of interior ballistics on the performance is investigated. Additionally, simple nonlinear fitting formulae are defined to highlight the variation of recoil momentum with the time of interior ballistic model. Finally, numerical simulation results are compared with the test results to validate the feasibility of the design. The experimental results demonstrate that the classical interior ballistic model can be used to accurately analyze the effect of the parameters on the projectile velocity and the recoil reduction efficiency. The projectile velocity of the recoilless gun could raised to 1200 m/s and the recoil momentum could be eliminated almostly. Therefore, the newly designed recoilless gun effectively eliminates the recoil momentum and significantly improves the projectile velocity. The findings should make an important contribution to the field of engineering applications of recoilless gun. [ABSTRACT FROM AUTHOR]

Traumatic injuries from civilian gunshot injuries represent a significant clinical burden to orthopaedic surgeons worldwide. Furthermore, the incidence of such injuries is increasing. Having a sound understanding of the pathophysiology associated with gunshot injuries and the appropriate management algorithm is vital. This chapter aims to review the current evidence regarding the incidence and prevalence of civilian ballistic trauma, the pathophysiological processes associated with these injuries, and the recommended management from emergent care at the time of injury to definitive surgery and rehabilitation. [ABSTRACT FROM AUTHOR]

This article deals with Ballistic interpretation of gunshot traces by presenting the main theoretical and practical aspects, which are related to forensic ballistics, firearms, traces left by them and some elements of forensic tactics and technique. [ABSTRACT FROM AUTHOR]

The high recoil force of a high-power gun produces a strong impact on the carrier, which severely limits the application of the high-power gun mounted on vehicles. A gas-controlled side-jet gun was designed to reduce the recoil force, and the gas-solid transient flow in the bifurcated tube of the gun was studied. First, a one-dimensional two-phase interior ballistics model was established considering the gas-solid coupling between the propellant gas and the valve in the front gas tube. Then, the propagation of the rarefaction wave in the barrel was studied, and the flow field distribution in the bifurcated tube was obtained. Finally, the mechanism of recoil reduction was analyzed. Results show that the bifurcated two-phase flow model can be used to accurately analyze the effect of the gas-controlled side-jet gun's parameters on the projectile velocity and the recoil reduction efficiency. The projectile velocities of the gas-controlled side-jet gun and the traditional gun are 955.7 m/s and 960 m/s, respectively. The projectile velocity loss of the gas-controlled side-jet gun is less than 0.5 %. The recoil momentum of the traditional gun and the gas-controlled side-jet gun are 538.62 N·s and 336.68 N·s, respectively. The recoil momentum of the gas-controlled side-jet gun decreases by 37.49 %. Additionally, the single firing time of the gas-controlled side-jet gun (18.91 ms) is less than that of the traditional single-barrel gun (more than 60 ms). Therefore, the newly designed gas-controlled side-jet gun significantly reduces the recoil momentum without losing the projectile velocity and continuous firing mode. [ABSTRACT FROM AUTHOR]

The sodium rhodizonate test is a simple colorimetric technique used to identify traces of lead and barium. A positive test provides rapid and photographically documentable results for shots fired at distances not exceeding 50 cm. Usually, this method is not used for identification of the firing hand, which is detected by electron microscopy with energy dispersive analysis (SEM-EDX), requiring the removal of any particles on the surface to be analyzed by STUB. The use of Sodium Rhodizonate, which is undoubtedly less selective, has the disadvantage of target element solubilization (lead and barium) and thus the loss of the preliminary morphological investigation of the particles. The purpose of this paper is to demonstrate that the two indicated methods can be considered complementary in the following order: 1. buffer sampling for electron microscopy investigation (STUB); 2. and subsequent performance of the Sodium Rhodizonate Test. In some special cases, when it is necessary to obtain the result more quickly, with regards to respecting the chronology of the aforementioned tests, it may be useful to carry out the Sodium Rhodizonate Test first, especially when particular and perhaps antiquated weapons were used for suicidal purposes causing considerable gas dispersion and shot residues from the mechanisms. This research illustrates how significant results were obtained substantiating the suicide hypothesis, following the use of an old revolver (year of manufacture around 1915-1920). [ABSTRACT FROM AUTHOR]

Copyright of Problems of Mechatronics. Armament, Aviation, Safety Engineering / Problemy Mechatroniki. Uzbrojenie, lotnictwo, Inżynieria Bezpieczeństwa is the property of Index Copernicus International and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The balancing force of the interior ballistics is an important issue in the design of the recoilless gun. It has been found in practice that the balancing force design method for recoilless guns based on the traditional classical interior ballistic theory cannot guide the balance from the physical mechanism and process. In order to study the unbalanced force experienced by the recoilless gun during the firing of the projectile and the variation law of its various parameters with time, the analysis and calculation method of the balanced interior ballistics is proposed in this article. This method separately models the aerodynamic and propellant combustion processes of the recoilless gun, using the characteristic line method to solve the model numerically. This method can be used to predict the change of the unbalanced force acting on the recoilless gun during the projectile firing of the recoilless gun. The reliability of the algorithm is verified by the interior ballistic performance when China 78 type 82 mm recoilless smoothbore gun launches the projectile. The study found that the unbalance impulse generated by the gas inside the barrel fired by the recoilless gun accounts for only 1.5 % of the total recoil impulse, but it has a great influence on the amount of impulse a shooter has can take. This approach provides a better understanding of this complex internal ballistic process, which has important implications for the design and improvements of recoilless guns. [ABSTRACT FROM AUTHOR]

The wounding potential of a projectile depends on its kinetic energy. The aim of the study was to investigate the deceleration of non-deforming full metal jacket handgun bullets (FMJ) in gelatine blocks of increasing length. The temporary cavity (TC) was visualized using a SA-X2 Photron camera. 126 test shots in 9 mm nominal calibre were fired under strict temperature control conditions (4°C) at small gelatine blocks ranging from 2 to 12 cm in length. The deposited energy was calculated based on the loss of bullet velocity through high-speed video analysis. The length of the TC was measured, when the TC reached its maximum height. The volume of the TC was approximated by a cylinder. Regression analysis showed a linear correlation between the length of the bullet path and the energy transfer. The constant deceleration of the FMJ bullets in gelatine up to 12 cm bullet path was confirmed across various brands and velocity ranges (270–450 m/s). Higher impact velocities correlated with increased loss of energy in the target medium. The shape of the bullet tip influenced the characteristic of deceleration. The volume of the tubular temporary cavity, derived from high-speed video records, was found to be proportional to the energy transferred. The proposed approach might be a valuable tool in advancing wound ballistics research. • Deceleration of FMJ bullets proportional to bullet path in compact target models. • Higher impact velocities resulted in greater loss of energy in the target medium. • The shape of the bullet tip influenced the characteristic of deceleration. • Proportionality of the temporary cavity to the transferred energy. [ABSTRACT FROM AUTHOR]

Copyright of Problems of Mechatronics. Armament, Aviation, Safety Engineering / Problemy Mechatroniki. Uzbrojenie, lotnictwo, Inżynieria Bezpieczeństwa is the property of Index Copernicus International and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Chinese Journal of Explosives & Propellants is the property of Chinese Journal of Explosives & Propellants Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The appearance of high-entropy alloys (HEAs) makes it possible for a material to possess both high strength and high ductility. It is with great potential to apply HEAs under extreme conditions such as in the penetration process. In this paper, experiments of WFeNiMo HEA and tungsten heavy alloy (WHA) projectiles penetrating medium-carbon steel were conducted by using the ballistic gun and two-stage light-gas gun that can accelerate projectiles to impact velocities ranging from 1162 m/s to 2130 m/s. Depth of penetration (DOP) at elevated impact velocities of HEA and WHA projectiles were obtained firstly. Combined with the macroscopic and microscopic analysis of the residual projectiles, the transition of the penetration mode of the WFeNiMo HEA projectile was identified systemically. The experimental results indicated that the penetration mode of the HEA projectile changes from self-sharpening to mushrooming with the increase of impact velocity, while for the WHA projectile, the penetration mode is always mushrooming. The microstructure of the residual HEA projectiles showed that the phases tangle with each other and the morphology of the microstructure of the phases differs in the two penetration modes. Besides, the evolution of shear bands and fractures varies in the two modes. The evolution of the microstructure of HEAs causes the sharp-pointed nose to disappear and the HEA projectile ultimately becomes blunt as the impact velocity increases. [ABSTRACT FROM AUTHOR]

A two-dimensional axisymmetric model, employing a dynamic mesh and user-defined functions, is used to numerically simulate the transient multiphase flow field produced by an underwater gun. Furthermore, a visualized shooting experiment platform with a high-speed camera is built to observe the evolution process of such a multiphase flow field. The simulated phase distribution diagram is agreed well with the shadow photo of the experiment, indicating that the numerical model is reasonable. Further examinations of the multiphase flow fields by using the submerged and sealed launch methods show that use of the sealed launch can significantly improve the interior ballistic performance of an underwater gun. In the cases by using these two types of underwater launch methods, the displacement of the projectile within the range of the muzzle flow field meets the exponential law over time. Moreover, a not fully developed bottle-shaped shock wave is formed when t = 0.4 ms, but this bottle-shaped shock wave expands more rapidly for the sealed launch. In addition, the amplitude of pressure oscillation for the sealed launch is larger than that of the submerged launch, but the pressure oscillation of the sealed launch lasts shorter. [ABSTRACT FROM AUTHOR]

This paper presents the results of the theoretical external ballistic calculations for projectiles fired from barrels which correspond to the barrels used in two Polish small arms systems: MSBS- 5.56 system (MSBS GROT standard rifle and MSBS GROT carbine) and BERYL system (BERYL standard rifle and MINI BERYL carbine). The results obtained allowed the analyse of the effects of barrel length and the associated initial projectile velocity on the nature of projectile trajectory, particularly the over height and projectile range obtained along the trajectories. The analysis of the results facilitated an assessment of the scope of proposed changes in the settings of the firearm sights, resulting from the use of barrels of different lengths and the consequential changes in projectile trajectory.

The ballistic performance, and behaviour, of an armour system is governed by two major sets of variables, geometrical and material. Of these, the consistency of performance, especially against small arms ammunition, will depend upon the consistency of the properties of the constituent materials. In a body armour system for example, fibre diameter, areal density of woven fabric, and bulk density of ceramic are examples of critical parameters and monitoring such parameters will form the backbone of associated quality control procedures. What is often overlooked, because it can fall into the User's domain, are the interfaces that exist between the various products; the carrier, the Soft Armour Insert (SAI), and the one or two hard armour plates (HAP1 and HAP2). This is especially true if the various products are sourced from different suppliers. There are between 30 and 150 individual layers within a typical body armour system, and each of the interfaces between each of those layers will, in some way or another, contribute to the ballistic performance of the system. For example, consider the following interfaces/interlayers: (i) the frictional, sliding, inter-ply surfaces within a soft armour pack, and also between the pack and the carrier, (ii) the air-gaps that may develop within the soft armour pack, (iii) the interconnecting space between the soft armour pack and the hard armour plate, (iv) the nature of the interfaces between adjacent plies of a multiplied backing laminate, even in a highly compressed Ultra High Molecular Weight Polyethylene (UHMWPE) variant, (v) the interlayer between the ceramic and its substrate, within a HAP, and (vi) the geometrical fit between two hard armour plates within a stacked body armour system. This paper will provide a Userfriendly overview of all such interfaces and provide unique guidance as to their criticality and influence. [ABSTRACT FROM AUTHOR]

Rarefaction wave gun can significantly reduce the recoil and the barrel heat without affecting projectile velocity during the launching process. This paper aims to improve the understanding of the muzzle flow characteristics during a rarefaction wave gun firing and clarify the different ballistic behaviors between the rarefaction wave gun and the traditional gun. First, the mathematical models and the numerical methods of the muzzle flow with the interior ballistic process were established. Then, the numerical simulation results were compared with the experimental data to validate the reliability and accuracy. Next, the rarefaction wave propagation behavior was described, and the interior ballistic process of the rarefaction wave gun was compared with that of the traditional gun. Then the development law of the muzzle flow field for the rarefaction wave gun coupled with the interior ballistics process was studied. Finally, the different detailed results of the muzzle flow between the traditional gun and the rarefaction wave gun were investigated. The development processes of the muzzle flow in both guns are generally similar, but the strength of the main flow parameters and the ballistic performances for the rarefaction wave gun are smaller than that for the traditional gun due to the rarefaction wave influence. This paper could provide a valuable reference for the research and design on the rarefaction wave gun. [ABSTRACT FROM AUTHOR]

Booming technological advances and turbulent military reforms have promoted the continuous advancement of weapons and equipment. High-power microwave (HPM) weapons have changed the damage modes of traditional guns, missiles and other kinetic energy weapons, as well as having the huge advantage of "changing the rules of the game." The study of exterior ballistics of high-power microwave weapons has theoretical support for the design and development of weapons and the verification of performance indicators and is also an important basis in the firing application of high-power microwave weapons. By studying the coupling mechanism between HPM weapons and targets, an exterior ballistics description of HPM weapons is given According to the description of exterior ballistics, the differences between HPM and traditional weapons in definitions, accuracies, space trajectories, space descriptions and "end points" are summarized, and the exterior ballistics space transmission is established. This study reveals the nine major transmission laws of the exterior ballistics of HPM weapons. The constructed model and related theories of the transmission laws for exterior ballistics lay a theoretical foundation for the in-depth study of key technologies of HPM weapons, such as fire control and damage assessment. [ABSTRACT FROM AUTHOR]

This paper presents a numerical and an analytical approach for calculation of internal ballistics parameters through determination of thermal and gasdynamic characteristics. The calculated parameters are validated through experimental tests on a real weapon system. The internal ballistic calculations are provided for two types of propellants using an analytical and a numerical model. Calculations and tests are performed for an anti-material rifle 12.7 mm. Weapon and ammunition testing is carried out according to the permanent international commission standard. Theoretical and experimental results for the gunpowder gases pressure and the muzzle velocity are compared. The good agreements between the calculated and the measured pressures and velocities increase the reliability of the estimated gunpowder gas temperatures in the barrel. The obtained results enable analysis and comparison of the output internal ballistics parameters for different types of propellant applications. [ABSTRACT FROM AUTHOR]

Few firearms have attracted as much attention, curiosity, and mythical attributes as the blunderbuss. Indeed, it often seems that fiction has overwhelmed the facts. To add to the mystery, the literature is conflicting with regard to defining exactly what a blunderbuss is, what it was used for, and how it performed. What is the difference between a blunderbuss and a musketoon? Is the blunderbuss really designed as a weapon of defence using whatever ammunition one might find in the garden? What was the real purpose of the flared bell mouth of the blunderbuss? Despite the extraordinary interest, the many extant examples of blunderbusses found in public and private collections, and the numerous related publications over centuries, it appears that virtually no properly controlled scientific studies have been carried out to address blunderbuss ballistics. Unfortunately, it was not possible for the author to carry out the carefully designed comprehensive experiments required for such a study. Thus, this article is a modest attempt to combine what information is available from some published blunderbuss 'tests', together with the results from more scientific forensic studies of the performance of sawn-off shotguns, and the addition some ballistic science and suggested scaling laws, to improve our understanding of blunderbuss ballistics. [ABSTRACT FROM AUTHOR]

In molecular ballistics, where traces originating from the use of firearms against biological targets are investigated, "backspatter" traces are of particular importance. This biological material comprising blood and tissue from the victim is propelled back from the bullet entry site towards the direction of the shooter and can consolidate and persist on the inner and outer surfaces of the firearm, from where it can be collected and analyzed. Thus, a connection between the weapon and the victim can be established solely by molecular biological trace analysis. For the criminalistic investigation of gun-related crimes, the determination of the distance between the weapon and the victim can be of critical importance in reconstructing the circumstances of a crime. In this study, we investigated possible correlations between the shooting distance and the amount of backspatter in/on the used firearm. To this purpose, we employed a previously established skull model and performed shootings in triplicates from various distances up to 50 cm with two types of handguns (pistol and revolver). Backspatter was collected from various sampling locations, and DNA contents were quantified. A post-shooting wound channel evaluation was conducted by optical and radiological evaluation. The obtained DNA yields varied considerably between replicates from the same and from different distances. In contrast, apart from contact shots, no meaningful differences were observable in wound channel evaluations. In summary, no meaningful correlation between backspatter distribution and DNA yields, the shooting distance and the condition of the wound channel could be established. [ABSTRACT FROM AUTHOR]

Background: Cranial firearm injuries (CFAIs) are expected to be frequent during warfare; however, it is becoming increasingly common among civilian population in our part of the world. These injuries are associated with significant morbidity and mortality in addition to financial loss. The objective of our study is to evaluate the pattern of gunshot injuries to cranium and their outcome. Methods: The study was conducted on 114 patients presenting with CFAIs to Jinnah Postgraduate Medical Centre, Karachi, Pakistan, between June 2015 and January 2019. Patients were evaluated with respect to age, gender, pattern of injury, Glasgow coma scale on arrival, radiological and clinical assessment, surgical intervention, and Glasgow outcome score measured at 6 months follow-up. Results: Among patients with cranial gunshot, injuries most were males (76.3%). More than 50% patients aged between 18 and 35 years. About 46.5% of patients presented with moderate traumatic brain injury commonly involving the temporal lobe (36.8%). Of total 114 patients, 84.2% were managed conservatively but wound debridement was done in all patients. At 6 months, the overall mortality in our patients was 33.3%. Patients with good outcome (GOS 4 and 5) were 30.7% and 35.9% patients had bad outcome (GOS 2 and 3). Complication rate was 14.9% and the most common complication was disseminated intravascular coagulation in 5.2%. Conclusion: Surgical intervention has no significant benefit over conservative management on long-term mortality and should be limited to patients with large intracranial hematomas and intraventricular hematomas causing hydrocephalus. [ABSTRACT FROM AUTHOR]

Ammunition designers are faced now a day with the tasks of improving muzzle velocity (MV) to achieve required penetration as well as developing gun propellant with minimum variation of ballistics at extremes of temperatures so as to maintain safe chamber pressure of gun. In order to meet the requirement an optimized propellant composition containing RDX, energetic plasticizer, nitrocellulose (NC), cellulose acetate (CA) and additives referred as Enhanced Energy Propellant (EEP) was processed and evaluated theoretically and experimentally. Performance in respect of ballistic parameters (static and dynamic), sensitivity, thermal characteristics, thermal stability and mechanical properties were evaluated and compared with that of the conventional triple base propellant (TBP). Experimental data on comparative study indicated that the newly developed EEP is superior to existing TBP in terms of energy, stability and thermal properties while sustaining the safe chamber pressure of gun. Dynamic firing results show that, EEP requires lower charge mass (7.43 kg) and lesser chamber pressure (459 MPa) to realize MV at par with standard. This illustrates high energy of EEP. [ABSTRACT FROM AUTHOR]

This paper deal with the comparison of relative wounding potential of guns, which we know from childhood, specifically blowpipe and slingshot. Many people played with these guns in childhood without knowing how dangerous these guns are. Because this area has not been examined enough, this paper focuses on it. The relative wounding potential is examined through an experimental method. This method is indirect and includes shooting to the replacement material, which was gelatine with a concentration of 20 %. Using a high-speed camera, the course of missiles in the target, from penetration to stopping, is recorded. The volume of the temporary cavity is determined by image analysis, and subsequently, the relative wounding potential is calculated. Other monitored parameters are the depth of penetration of the projectile and the impact velocity of the projectile. Then, it is possible to determine the transmitted kinetic energy of the projectile. The results should help to assess the dangers of these "children's" weapons and alert society to their risks. They can also serve to experts in the field of ballistics and forensic expertise. [ABSTRACT FROM AUTHOR]

• Thermal modification does not significantly change the ballistic performance of coastal western hemlock CLT. • Density and hardness do no fully encompass the energy absorbing capacity of CLT under small arms ballistic threats. • Empirically fit UFC partial penetration equation formulations fit treatment specific datasets with minimal error. • One global UFC partial penetration equation can be utilized for design with an appropriate safety factor. To test and understand the potential for integration of thermally modified coastal western hemlock CLT systems in military applications, 109 ballistic experiments were conducted at the United States Army Engineer Research Development Center's Fragmentation Simulation Facility. For a range of CLT thicknesses, the depth of penetration and residual velocities were recorded for different striking velocities utilizing a 0.50 caliber steel sphere projectile. This information was used to compare and add to the existing ballistics data for CLT, investigate the effects of thermal modification on high strain rate loading of wood, assess physics-based empirical design equations used by the Unified Facilities Criteria, and evaluate energy absorbing behavior at a range of thicknesses and striking velocities. The experimental results showed that thermal modification does not significantly alter the full and partial penetration performance of coastal western hemlock CLT. However, the mechanism of fracture along the path of the projectile differed, which indicates that the model parameters used in the UFC design equation (density, hardness, and projectile properties) may not fully encompass the ballistic failure mechanisms of CLT. [ABSTRACT FROM AUTHOR]