Search

This paper proposes a novel mesh-based equivalent magnetic network (EMN) model for performance analysis and optimal design of permanent magnet (PM) machines. The key contribution of the EMN model is that a generalized air-gap model solution is proposed by considering the machine motion of PM machines. Meanwhile, a modular modeling method is presented, and then the optimal design of PM machines can be investigated without repetitive programming and modeling. Two kinds of mesh elements are comprehensively utilized in the EMN model, and a hybrid rotor PM (HRPM) machine with interior PM and surface PM configuration is selected as an example to illustrate the development processes of EMN model. Meanwhile, the electromagnetic characteristics of HRPM machine are calculated by the proposed EMN model, such as back electromotive force, air-gap flux density distribution, and average torque. Finally, the accuracy and effectiveness of the proposed EMN model are verified through comparisons with finite element analysis and experimental tests. [ABSTRACT FROM AUTHOR]

A basic, fast, and accurate steady-state finite-element analysis (FEA) based parameter and performance calculation method for the wound-rotor induction motor is presented. The method couples the circuit equations with field equations using the principle of frozen permeabilities to present the voltage-fed induction motor. The effects of saturation saliency and cross-magnetization are accurately taken into account. The method is verified by direct comparison with the current- and torque-slip frequency curves obtained from a commercial FEA package. [ABSTRACT FROM PUBLISHER]

This paper presents and experimentally validates a new control scheme for electrical drive systems, named cascaded predictive speed and current control. This new strategy uses the model predictive control (MPC) concept. It has a cascaded structure like that found in field-oriented control or direct torque control. Therefore the control strategy has two loops, external and internal, both implemented with model predictive control. The external loop controls the speed, while the inner loop controls the stator currents. The inner control loop is based on Finite Control Set Model Predictive Control, and the external loop uses MPC deadbeat, making full use of the inner loop's highly dynamic response. Experimental results show that the proposed strategy has a performance that is comparable to the classical control strategies but that it is overshoot-free and provides a better time response. [ABSTRACT FROM PUBLISHER]

This paper describes a self-sensing control scheme based on pulse-voltage-injection for permanent-magnet synchronous machines (PMSMs). Multiple saliencies, as well as the saturation and reluctance-based coupling effects, are studied by means of analytical methods, and are proved with finite element method simulations and measurements. These phenomena cause a constant estimated error of the rotor angle, as well as periodic errors with harmonics of order 6 k. The primary saliency of the considered interior PMSM with concentrated windings is strongly dependent on the load, so that the self-sensing capability disappears at some critical operating points. In this study, the parameters of the multiple saliencies are identified based on the proposed self-sensing method. The secondary saliencies are compensated with a closed loop control structure. The effectiveness of the proposed method is confirmed by experimental results. [ABSTRACT FROM PUBLISHER]

A new method of hierarchically partitioning the numerical calculations associated with the finite-element analysis of rotating electrical machinery is set forth. In this method, the device is partitioned geometrically and hierarchically into its constituent subsystems. Each Newton–Raphson iteration in a magnetically nonlinear device involves the hierarchical solution of relatively compact linear algebraic equations. This is contrasted with conventional approaches involving the formation or updating and solution of a single but large-dimensional sparse equation. In addition to an improvement in the computational efficiency, this approach facilitates efficient management of rotation. The proposed approach is demonstrated to require less than one-fourth the computation time, while producing identical results to those of a conventional formulation when solving for cogging torque and back electromotive force (back-EMF) of a permanent-magnet synchronous machine. The numerical results are also shown to be in agreement with the measured data. [ABSTRACT FROM AUTHOR]