Search

Paris' power law is commonly used to describe transverse thermal cracking propagation in asphalt concrete (AC) pavements. In its most common format, it relates the rate of change in the crack length per cycle to changes in either the stress intensity factor K or the energy release. The parameters defining this relationship for ACs can be obtained using the Texas cyclic Overlay Test (OTR). This paper describes two numerical approaches for simulating the OTR using the extended finite element method (XFEM). The first uses the direct low-cyclic fatigue (LCF) approach and the second uses the virtual crack closure technique (VCCT). Comparisons of the model predictions to laboratory OTR measurements for six mixtures suggest that the XFEM model coupled with VCCT is better suited for simulating the OTR. The model output includes the crack length and the energy release rate ERR (i.e. ${\rm \Delta }J_R$ Δ J R ) as cracks propagate. This data was used to fit the modified Paris' law parameters ${A}^{\prime}$ A ′ and ${n}^{\prime}$ n ′ as a function ${\rm \Delta }J_R$ Δ J R . Subsequently, the traditional A and n Paris' power law parameters were fitted by estimating the corresponding ΔK. Using this model, it was possible to efficiently estimate the AC cracking parameters using as input only the tensile modulus and the critical ERR. [ABSTRACT FROM AUTHOR]

• The CRTS Ⅲ slab track model with prefabricated cracks is established by extended finite element method. • The stress intensity factors (SIFs) at the tips of cracks on the track slab under train load are solved. • The effects of the crack length and depth on the SIFs of three types of cracks are discussed. • The variations of crack growth rate calculated by Paris' semi-empirical during service are analyzed. Microcracks may occur in Chinese Railway Track System type III (CRTS III) ballastless track slabs during service, and it is necessary to investigate their potential propagation under train load, which could lead to slab deterioration and affect the durability of the track structure. In this paper, based on the fracture mechanics theory, the stress intensity factors (SIFs) at the tips of transverse crack, longitudinal crack and vertical crack on the CRTS III track slabs under train load are solved by the extended finite element method (XFEM) in Abaqus software. The changes of SIFs at the crack tips during the passage of the train are analyzed, and the effects of the crack length and depth on the SIFs of the three types of cracks are discussed under train load. Crack growth rate is calculated using Paris' semi-empirical law to estimate slab life. The results show that the train load contributes to the propagation of transverse and vertical cracks in the vertical direction and inhibits the longitudinal cracks. When the middle of the sixth vehicle is above the crack, the SIFs at the tips of the crack reach their maximum values. The SIF of vertical cracks exceeds the fracture toughness at a certain depth. The fatigue load cycles calculated by Paris' semi-empirical law suggest that maintenance will not be required due to insufficient propagation under train load during service. [ABSTRACT FROM AUTHOR]

• The Johnson-cook damage model, traction separation and Paris law equations are incorporated in the XFEM model to predict the formation of spalling, crack propagation and fatigue life for the spur gear respectively. • 3D finite element analysis was performed to determine the fatigue life of the spur gear using with and without spall using different crack lengths and backup ratio. • Numerical modeling of spur gear developed and results showed that the increase in backup ratio from 0.3 to 3.3, an exponential increase in the fatigue life with and without spall. • The spalling depth obtained on the spur gears with backup ratio 0.3, 0.5, 1.0, and 3.3 are within the range of 20–100 μm. Spur gears are most commonly used to transmit power, and speed variation from one shaft to another shaft. Spalling more frequently occurs surface fault in the gears and sometimes it causes severe damage to the gear tooth. This paper focuses on the effect of spalling on the fatigue life of spur gear. The simulation study is conducted in two parts. In the first part, the Johnson-Cook Damage model is used for the spall generation on the tooth surface. After that, the spalling results are imported as input into the crack initiation /crack propagation model and calculated the rate of crack growth of fatigue crack is based on Paris law implemented in user-defined subroutine Abaqus software. User-defined subroutine code is also validated with the comparison of the numerical and experimental results available in the literature. Cracks with different initial lengths are placed in the deeper cavities of spalling and the crack propagation analysis is conducted using XFEM. The study is conducted for four different backup ratios with cracks of three different initial lengths. The fatigue crack growth life of spur gears is investigated using different crack lengths and backup ratios. Further, a comparison has been made between the fatigue life of a spur having a spalling fault with the fatigue life of spur gear that does not have spalling fault present on its surface. It has also been found in this study that spur gear having cracks originating from the spall region have a less fatigue life as compared to the spur gear without spalling. With the increase in backup ratio from 0.3 to 3.3, an exponential increase in fatigue life is observed. However, the fatigue life of spur gear without the presence of spalling fault has higher fatigue for all backup ratios. [ABSTRACT FROM AUTHOR]

• Corresponding relationship between heat diffusion equation and seepage diffusion equation. • An analogy method to compute fatigue fracture in steam turbine by using ABAQUS. • An analysis process for turboset to estimate the remaining thermal-fatigue life. • To supply a structural assessment and lifetime prediction for pressure vessels. Natural crack propagation analysis in thermal-fatigue fracture problem is a challenging problem. Reliable predictions for the crack path and residual live of structure provide essential information for the structural integrity assessment and repairment. Various conventional predictive fatigue models have been proposed to evaluate the remaining life, but most of them can't build an explicit relation between damage degree and fatigue life. In recent years, the advanced techniques on crack propagation analyses were proposed, which were used to simulate the fatigue crack growth, but no coupling thermal-fracture function existed in the commercial finite element codes. Fortunately, the extended finite element method (XFEM) in ABAQUS has the coupling permeation diffusion-fracture model. In this paper, an analogy method from coupling permeation diffusion-fracture to coupling thermal-fatigue is proposed to compute fatigue fracture, which is applied for predicting the fatigue life in a specific steam turbine by directly using ABAQUS. Typical fatigue experiments by compact specimens of cast iron are carried out for the fatigue parameters measurement. By using analogy method and Paris' Law, an entire analysis process for the turbine units is built to estimate the thermal-fatigue life. The simulation results predicting remaining life and analyzing fatigue crack growth for the pressurized cylinder are agreed well with the measured engineering data. [ABSTRACT FROM AUTHOR]