Search

A novel whole-cell electrochemical sensor was developed and applied for sensitive amperometric detection of riboflavin. In this work, a whole-cell based riboflavin redox cycling system was characterized, in which electroactive bacteria Shewanella oneidensis MR-1 was employed as the biocatalyst to regenerate the reduced riboflavin after the electrode oxidation. This redox cycling system efficiently enhanced the electrochemical response of riboflavin and enabled a stable current output at poised electrode potential. Thus, a sensitive amperometric biosensing system for riboflavin detection was developed by integrating this whole-cell redox cycling system with the conventional riboflavin electrochemical sensor. Remarkably, this riboflavin biosensor exhibited high sensitivity (LOD = 0.85 ± 0.09 nM, S/N = 3), excellent selectivity and stability. Additionally, reliable analysis of real samples (food and pharmaceutical samples) by this biosensor was achieved. This work provided sensitive and practical tool for riboflavin detection, and demonstrated that the integration of electroactive bacteria and using its outwards electron transfer for redox cycling would be a powerful and promising strategy to improve the performance of electrochemical sensing system. [ABSTRACT FROM AUTHOR]

Although microbial fuel cells (MFCs) is considered as one of the most promising technology for renewable energy harvesting, low power output still accounts one of the bottlenecks and limits its further development. In this work, it is found that Cu 2+ (0.1 μg L −1 –0.1 mg L −1 ) or Cd 2+ (0.1 μg L −1 –1 mg L −1 ) significantly improve the electricity generation in MFCs. The maximum power output achieved with trace level of Cu 2+ (∼6 nM) or Cd 2+ (∼5 nM) is 1.3 times and 1.6 times higher than that of the control, respectively. Further analysis verifies that addition of Cu 2+ or Cd 2+ effectively improves riboflavin production and bacteria attachment on the electrode, which enhances bacterial extracellular electron transfer (EET) in MFCs. These results unveil the mechanism for power output enhancement by Cu 2+ or Cd 2+ addition, and suggest that metal ion addition should be a promising strategy to enhance EET as well as power generation of MFCs. [ABSTRACT FROM AUTHOR]

The feasibility to use tartaric acid doped PANI for MFC anode modification was determined. Uniform PANI nanowires doped with tartaric acid were synthesized and formed mesoporous networks on the carbon cloth surface. By using this tartaric acid doped PANI modified carbon cloth (PANI-TA) as the anode, the voltage output (435 ± 15 mV) and power output (490 ± 12 mW/m 2 ) of MFC were enhanced by 1.6 times and 4.1 times compared to that of MFC with plain carbon cloth anode, respectively. Strikingly, the performance of PANI-TA MFC was superior to that of the MFCs with inorganic acids doped PNAI modified anode. These results substantiated that tartaric acid is a promising PANI dopant for MFC anode modification, and provided new opportunity for MFC performance improvement. [ABSTRACT FROM AUTHOR]