Search

Herein, carbon nanotubes (CNTs)–cellulose nanocrystals (CNCs)/ethylene‐vinyl acetate (EVA) composite are prepared with excellent bonding properties, electrical conductivity, and thermal conductivity using an ultrasonic‐assisted forced infiltration (UAFI) method. The CNTs–CNCs (10:1)/EVA composite had the highest shear (82.9 N) and strip (12.2 N) forces at the interface when bonding leather to fabric as an interface bonding material (IBM). Different mass ratios of CNTs to CNCs in the composites lead to different electrical and thermal conductivity properties. When the mass ratio of CNTs to CNCs is 10:1, the CNTs–CNCs(10:1)/EVA composites reach an electrical and thermal conductivity of 158.37 S m−1 and 6.351 W (m·K)−1, respectively. In addition, the CNTs–CNCs(10:1)/EVA composite shows excellent thermal stability, mechanical properties, thermal performance, and electromagnetic shielding. The prepared EVA composite has a broad application prospect in IBM. [ABSTRACT FROM AUTHOR]

Due to the rapid development of the miniaturization and portability of electronic devices, the demand for polymer composites with high thermal conductivity and mechanical flexibility has significantly increased. A carbon nanotube (CNT)-graphene (Gr)/polydimethylsiloxane (PDMS) composite with excellent thermal conductivity and mechanical flexibility is prepared by ultrasonic-assisted forced infiltration (UAFI). When the mass ratio of CNT and Gr reaches 3:1, the thermal conductivity of the CNT-Gr(3:1)/PDMS composite is 4.641 W/(m·K), which is 1619% higher than that of a pure PDMS matrix. In addition, the CNT-Gr(3:1)/PDMS composite also has excellent mechanical properties. The tensile strength and elongation at break of CNT-Gr(3:1)/PDMS composites are 3.29 MPa and 29.40%, respectively. The CNT-Gr/PDMS composite also shows good performance in terms of electromagnetic shielding and thermal stability. The PDMS composites have great potential in the thermal management of electronic devices. [ABSTRACT FROM AUTHOR]

For the better operation of future electronic devices in complex situations, higher requirements of mechanical performance, especially bearing capacity, were put forward to functional composites. Therefore, the mechanical performance enhancement of functional composites had important practical application value. In this work, we reported a short carbon fiber-graphene nanoplatelets-polydimethylsiloxane (SGP)/epoxy acrylic resin (EA resin) composites with integrated thermal conductivity, electromagnetic interference (EMI) shielding, and mechanical performances using a combination method of 3D printing and vacuum impregnation. In the SGP/EA resin composite, EA resin skeleton with different cell shapes was responsible for the bearing capacity of composite samples, while the thermal conductivity and EMI shielding performance were provided by the SGP compound. When the cell shape of skeleton was circular and the filling contents in SGP compound was 15 wt% SCF and 6 wt% GNP, the SGP/EA resin composite presented best combination properties of 323.5 kPa compressive modulus, 2.13 W/(m·K) thermal conductivity, and 45.93 dB EMI shielding performance at 12.4 GHz. This work provided a facile, low-cost, and scalable method to fabricate composite samples with integrated thermal conductivity, EMI shielding, and mechanical performances. These multifunctional composites are highly promising for applications concerning heat dissipation, EMI shielding, and load-bearing devices. [Display omitted] [ABSTRACT FROM AUTHOR]