Search

The exact fabrication of precise three-dimensional structures for piezoresistive sensors necessitates superior manufacturing methods or tooling, which are accompanied by time-consuming processes and the potential for environmental harm. Herein, we demonstrated a method for

Cellulose nanopaper (CNP) has been considered as a promising material with great application potential in diverse fields. However, the hydrophilic nature of CNP significantly limits its practical application. In order to improve its water resistance, we demonstrate a facile approach to functionalize CNP by impregnating it with chitosan (CS), followed by in situ polymerization of polypyrrole (PPy). The results indicate that the obtained CNP/CS/PPy shows excellent water resistance with the wet tensile strength of up to 80 MPa, which is more than 10 times higher than that of the pure CNP. Intriguingly, new features (e.g., electrical conductivity, antibacterial activity, and so forth) are achieved at the same time. The functionalized CNP/CS/PPy shows a high conductivity of 6.5 S cm-1, which can be used for electromagnetic interference shielding applications with a high shielding performance of around 18 dB. In addition, the CNP/CS/PPy exhibits good antibacterial activity toward Staphylococcus aureus and Escherichia coli, with the bacterial reductions of 99.28 and 95.59%, respectively. Thus, this work provides a simple and versatile approach to functionalize CNP for achieving multifunctional properties.

Flexible paper-based sensors may be applied in numerous fields, but this requires addressing their limitations related to poor thermal and water resistance, which results in low service life. Herein, we report a paper-based composite sensor composed of carboxylic carbon nanotubes (CCNTs) and poly-m-phenyleneisophthalamide (PMIA), fabricated by a facile papermaking process. The CCNT/PMIA composite sensor exhibits an ability to detect pressures generated by various human movements, attributed to the sensor's conductive network and the characteristic "mud-brick" microstructure. The sensor exhibits the capability to monitor human motions, such as bending of finger joints and elbow joints, speaking, blinking, and smiling, as well as temperature variations in the range of 30-90 °C. Such a capability to sensitively detect pressure can be realized at different applied frequencies, gradient sagittas, and multiple twists with a short response time (104 ms) even after being soaked in water, acid, and alkali solutions. Moreover, the sensor demonstrates excellent mechanical properties and hence can be folded up to 6000 times without failure, can bear 5 kg of load without breaking, and can be cycled 2000 times without energy loss, providing a great possibility for a long sensing life. Additionally, the composite sensor shows exceptional Joule heating performance, which can reach 242 °C in less than 15 s even when powered by a low input voltage (25 V). From the perspective of industrialization, low-cost and large-scale roll-to-roll production of the paper-based sensor can be achieved, with a formed length of thousands of meters, showing great potential for future industrial applications as a wearable smart sensor for detecting pressure and temperature, with the capability of electric heating.

A complete mathematical model for electromigration in paper-based analytical devices is derived, based on differential equations describing the motion of fluids by pressure sources and EOF, the transport of charged chemical species, and the electric potential distribution. The porous medium created by the cellulose fibers is considered like a network of tortuous capillaries and represented by macroscopic parameters following an effective medium approach. The equations are obtained starting from their open-channel counterparts, applying scaling laws and, where necessary, including additional terms. With this approach, effective parameters are derived, describing diffusion, mobility, and conductivity for porous media. While the foundations of these phenomena can be found in previous reports, here, all the contributions are analyzed systematically and provided in a comprehensive way. Moreover, a novel electrophoretically driven dispersive transport mechanism in porous materials is proposed. Results of the numerical implementation of the mathematical model are compared with experimental data, showing good agreement and supporting the validity of the proposed model. Finally, the model succeeds in simulating a challenging case of free-flow electrophoresis in paper, involving capillary flow and electrophoretic transport developed in a 2D geometry. Fil: Schaumburg, Federico. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Instituto de Desarrollo Tecnológico para la Industria Química. Universidad Nacional del Litoral. Instituto de Desarrollo Tecnológico para la Industria Química; Argentina Fil: Kler, Pablo Alejandro. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Centro de Investigaciones en Métodos Computacionales. Universidad Nacional del Litoral. Centro de Investigaciones en Métodos Computacionales; Argentina Fil: Berli, Claudio Luis Alberto. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Instituto de Desarrollo Tecnológico para la Industria Química. Universidad Nacional del Litoral. Instituto de Desarrollo Tecnológico para la Industria Química; Argentina

To date, flexible pressure sensors built on silver nanowires (AgNWs) have attracted tremendous attention, owing to their versatile applications in wearable, human-interactive, health-monitoring devices. Cellulose and its derivatives, which show great promise in serving flexible pressure sensors as the desired substrate due to their natural abundance, biocompatibility, easy processibility, and low costs. Herein, we reported a rational strategy to design a silver nanowires-dual-cellulose conductive paper. Its morphology, chemical and crystal structures, thermal stability, mechanical performances, and electrical properties were carefully studied. The results suggested that good tensile properties (tensile strength ≤8.10 MPa), high electrical conductivity (≤ 1.74 × 10

Rapid diagnosis by using small, simple, and portable devices could represent one of the best strategies to limit the damage and contain the spread of viral, bacterial or protozoa diseases, principally when they can be transmitted by air and are highly contagious, as some respiratory viruses are. The presence of antibodies in blood or serum samples is not the best option for deciding when a person must be quarantined to stop transmission of disease, given that cured patients have antibodies, so the best diagnosis methods rely on the use of nucleic acid amplification procedures. Here we present a very simple device and detection principle, based on paper discs coupled to contactless conductivity (C4D) sensors, can provide fast and easy diagnostics that are needed when an epidemic outbreak develops. The paper device presented here solves one of the main drawbacks that nucleic acid amplification tests have when they are performed outside of central laboratories. As the device is sealed before amplification and integrally disposed in this way, amplimers release cannot occur, allowing repetitive testing in the physician’s practice, ambulances, or other places that are not prepared to avoid cross-contamination of new samples. The use of very low volume samples allows efficient reagent use and the development of low cost, simple, and disposable point-of-care diagnostic systems., Author summary In 2005, the World Health Organization (WHO) recognized Chagas Disease as a neglected tropical disease. Meanwhile the serological tests, recommended by WHO, can be performed for chronic disease diagnosis, the nucleic acid amplification tests must be performed for the detection of the acute phase of the disease. Although the existing laboratory diagnosis tests for Chagas Disease are sensitive and highly reproducible, they cannot be performed in rural, low infrastructure environments, where this disease prevails. In this sense, the use of simple and portable analytical devices may be able to offer an affordable solution to this problem, allowing fast sampling, diagnosis and treatment prescription in one simple and fast intervention, as the performed by short term medical missions. In this study we show for the first time a diagnosis test comprising low cost materials and employing a contactless and label-free conductivity detection system that is used to read the result of a nucleic acid amplification reaction. The test showed high sensitivity for Chagas Disease diagnosis showing the potential to be used in rural and low income places.

Flexible electronics products have attracted wide attention because of their excellent flexibility, conductivity and stability. In this study, the liquid phase reduction method was used to in situ reduce fractal-structured silver particles (FSSPs) on cellulose surface to prepare conductive paper with excellent conductivity, and good stability and flexibility. The experimental results show that when the mass ratio of silver to cellulose was 1.5:1, the sheet resistance of conductive paper is as low as 0.02 Ω·sq−1, and the conductivity reaches 1041.33 S cm−1, which shows excellent conductivity. In order to expand the application of conductive paper in the field of flexible wearable electronic products, the mechanical stability and oxidation resistance of conductive paper were tested. The results show that the conductive paper has good stability and is expected to replace the flexible electronics products made of plastic.

Hybrid nanomaterials fabricated by the heterogeneous integration of 1D (carbon nanotubes) and 2D (graphene oxide) nanomaterials showed synergy in electrical and mechanical properties. Here, we reported the infiltration of carboxylic functionalized single-walled carbon nanotubes (C-SWNT) into free-standing graphene oxide (GO) paper for better electrical and mechanical properties than native GO. The stacking arrangement of GO sheets and its alteration in the presence of C-SWNT were comprehensively explored through scanning electron microscopy, X-ray photoelectron spectroscopy (XPS) and X-ray diffraction. The C-SWNTs bridges between different GO sheets produce a pathway for the flow of electrical charges and provide a tougher hybrid system. The nanoscopic surface potential map reveals a higher work function of the individual functionalised SWNTs than surrounded GO sheets showing efficient charge exchange. We observed the enhanced conductivity up to 50 times and capacitance up to 3.5 times of the hybrid structure than the GO-paper. The laminate of polystyrene composites provided higher elastic modulus and mechanical strength when hybrid paper is used, thus paving the way for the exploitation of hybrid filler formulation in designing polymer composites.

This study aims to explore the channel patterns and the characteristic parameters of the zigzag microchannel based on microfluidic paper-based analytical devices (μPADs), in which the mixing efficiency and speed can be greatly enhanced. Better mixing of the solutions was obtained by adding a simple directing electric field to the optimized structure of the zigzag microchannel on paper-based chips instead of the traditional complex devices. A higher mixing efficiency was reached when the direct-current (DC) power supply reached 20 V. Meanwhile, a piezoelectric transducer (PZT) driver was used in the mixing experiment with the paper-based zigzag microchannel. The results show that the mixing efficiency reached a maximum value when the input voltage and frequency were 30 V and 150 Hz, respectively. These paper-based devices meet the requirements of the biochemical analysis field because they are low cost, easy to operate, and have high efficiencies, giving them good prospects for future applications. Graphical Abstract.

This paper systematically studies the effect of Fe3O4 nanoparticle size on the insulation performance of nanofluid impregnated paper. Three kinds of Fe3O4 nanoparticles with different sizes and their nanofluid impregnated papers were prepared. Environmental scanning electron microscopy (ESEM) and infrared spectroscopy were used to analyze the combination of Fe3O4 nanoparticles and nanofluid impregnated paper. The effect of nanoparticle size on breakdown voltage and several dielectric characteristics, e.g., permittivity, dielectric loss, of the nanofluid impregnated paper were comparatively investigated. Studies show that the Fe3O4 nanoparticles were bound to impregnated paper fibers by O–H bonds, while the relative permittivity and dielectric loss of the nanofluid impregnated papers were increased. Meanwhile, the increase of trap depth, caused by the nanoparticles, can trap the electric charge and improve the breakdown strength. The test results show that the direct current (DC) and alternating current (AC) breakdown voltages of nanofluid impregnated paper increased by 9.1% and 10.0% compared to FR3 nanofluid impregnated paper, respectively.

This chapter describes the development of paper-based microchip electrophoresis (pME) devices for the separation of clinically relevant compounds. pME were fabricated by laser cut and thermal lamination process using polyester pouches. In addition, hand-drawn pencil electrodes were integrated to the device to perform capacitively coupled contactless conductivity detection (C

We reported a highly conductive nanocomposite made with multiwalled carbon nanotubes (MWCNTs) and chitin nanofibers (ChNFs). The MWCNTs were dispersed into ChNFs by the simple process of vacuum-filtration, forming a three-dimensional network structure. In this approach, MWCNT acted as a filler to introduce electron channel paths throughout the ChNF skeleton. And then, a hybrid hydrogel system (20 wt.% NaOH, -18 °C) was applied to prepare the ChNF/MWCNT gel-film followed with drying process. It is found that the resultant ChNF/MWCNT gel-film exposed much more MWCNT areas forming denser structure due to the shrinking of ChNFs after the gelation treatment. Compared with ChNF/MWCNT film, the one treated under hydrogel system (ChNF/MWCNT gel-film) exhibited almost twice higher conductivity (9.3S/cm for 50 wt.% MWCNTs in gel-film; whereas 4.7S/cm for 50 wt.% MWCNTs in film). Moreover, the facile and low-cost of this conductive paper may have great potential in development of foldable electronic devices.

We report results of the studies relating to the fabrication of a paper based sensor comprising of poly (3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) and reduced graphene oxide (RGO) composite. The effect of various solvents like methanol, ethylene glycol and H 2 SO 4 on the electrical conductivity of PEDOT:PSS coated Whatman paper has been investigated. The conductivity of this solution processed conducting paper significantly increases from ~1.16×10 −4 S cm −1 up to ~3.57×10 −2 S cm −1 (~300 times) on treatment with ethylene glycol. The observed significant increase in electrical conductivity is due to conformational rearrangement in the polymer and is due to strong non-covalent cooperative interaction between PEDOT and the cellulose molecules. Further, incorporation of RGO into the conducting paper results in improved electrochemical performance and signal stability. This paper electrode is a promising alternative over the expensive conventional electrodes (ITO, gold and glassy carbon), that are known to have limited application in smart point-of-care (POC) devices. This low cost, flexible and environment friendly conducting paper based biosensor utilized for cancer biomarker (carcinoembryonic antigen, CEA) detection reveals high sensitivity of 25.8 µA ng −1 mL cm −2 in the physiological range, 1–10 ng mL −1 .

Multifunctional electronics are attracting great interest with the increasing demand and fast development of wearable electronic devices. Here, we describe an epidermal strain sensor based on an all-carbon conductive network made from multi-walled carbon nanotubes (MWCNTs) impregnated with poly(dimethyl siloxane) (PDMS) matrix through a vacuum filtration process. An ultrasonication treatment was performed to complete the penetration of PDMS resin in seconds. The entangled and overlapped MWCNT network largely enhances the electrical conductivity (1430 S m-1), uniformity (remaining stable on different layers), reliable sensing range (up to 80% strain), and cyclic stability of the strain sensor. The homogeneous dispersion of MWCNTs within the PDMS matrix leads to a strong interaction between the two phases and greatly improves the mechanical stability (ca. 160% strain at fracture). The flexible, reversible and ultrathin (

We present a new paper-based isotachophoresis (ITP) device design for focusing DNA samples having lengths ranging from 23 to at least 1517 bp. DNA is concentrated by more than two orders of magnitude within 4 min. The key component of this device is a 2 mm-long, 2 mm-wide circular paper channel formed by concertina folding a paper strip and aligning the circular paper zones on each layer. Due to the short channel length, a high electric field of ~16 kV m(-1) is easily generated in the paper channel using two 9 V batteries. The multilayer architecture also enables convenient reclamation and analysis of the sample after ITP focusing by simply opening the origami paper and cutting out the desired layers. We profiled the electric field in the origami paper channel during ITP experiments using a nonfocusing fluorescent tracer. The result showed that focusing relied on formation and subsequent movement of a sharp electric field boundary between the leading and trailing electrolyte.

Herein, an environment friendly paper-based biobattery is demonstrated that yields a power of 12.5W/m3. Whatman filter papers were used not only as support for electrode fabrication but also as separator of the biobattery. To provide electrical conductivity to the paper-based cathode and anode, commercially available eyeliner containing carbon nanoparticles and Fe3O4 was directly employed as conductive ink without any binder. With an instant start-up, the as-fabricated biocompatible electrodes could hold bacteria in an active form at the anode allowing chemical oxidation of organic fuel producing current. The facile process delineated here can be employed for the tailored electrode fabrication of various flexible energy harnessing devices.

In this work, we detail the progress of a novel electrochemical disposable device, which has a relatively low cost and easy production, with a novel conductive ink, that consists of graphite and automotive varnish mixture, deposited over a self-adhesive paper, granting an easy production with relatively low cost. The electrode surface was characterized by scanning electron microscopy, X-ray powder diffraction and Fourier transforms infrared and Raman, cyclic voltammetry and electrochemical impedance spectroscopies. In addition, the proposed electrode was applied for individual electrochemical determination of dopamine and serotonin. The device achieved a linear response between 30 and 800 μmol L−1 and a limit of detection (LOD) of 0.13 μmol L−1, by square wave voltammetry for dopamine and a linear range from 6.0 to 100 μmol L−1, with a LOD of 0.39 μmol L−1, by differential pulse voltammetry for serotonin. Later, the working electrode was modified with glucose oxidase and dihexadecyl phosphate film in order to obtain a biosensor. At this stage, CV was applied to detect glucose in the range of 1.0–10 μmol L−1 and LOD of 0.21 μmol L−1. By three different techniques and analytes, the sensoring and biosensoring processes presented high reproducibility. The proposed adhesive electrode is easy to prepare, disposable, within non-restrictive nature, which allows an approach of a new device for electrochemical sensing and biosensing.

A membrane potential change in cells is accompanied with mechanical deformation. This electromechanical response can play a significant role in regulating action potential in neurons and in controlling voltage-gated ion channels. However, measuring this subtle deformation in mammalian cells has been a difficult task. We show a plasmonic imaging method to image mechanical deformation in single cells upon a change in the membrane potential. Using this method, we have studied the electromechanical response in mammalian cells and have observed the local deformation within the cells that are associated with cell–substrate interactions. By analyzing frequency dependence of the response, we have further examined the electromechanical deformation in terms of mechanical properties of cytoplasm and cytoskeleton. We demonstrate a plasmonic imaging approach to quantify the electromechanical responses of single mammalian cells and determine local variability related to cell–substrate interactions.

In this work, we prepare cellulose nanopapers of high mechanical performance and with the electrical conductivity of a semiconductor. Cellulose nanofibers (CNF) from bleached softwood pulp were coated with polypyrrole (PPy) via in situ chemical polymerization, in presence of iron chloride (III) as oxidant agent. The structure and morphology of nanopapers were studied, as well as their thermal, mechanical and conductive properties. Nanopaper from pure CNF exhibited a very high tensile response (224 MPa tensile strength and 14.5 GPa elastic modulus). The addition of up to maximum 20% of polypyrrole gave CNF/PPy nanopapers of high flexibility and still good mechanical properties (94 MPa strength and 8.8 GPa modulus). The electrical conductivity of the resulting CNF/PPy nanopaper was of 5.2 10 −2 S cm −1 , with a specific capacitance of 7.4 F g −1 . The final materials are strong and conductive nanopapers that can find application as biodegradable flexible thin-film transistor (TFT) or as flexible biosensor.

Polyaniline (PANI) with/without polystyrene (PS), was successfully manufactured in the occurrence of dispersed pulp fibers via the oxidative polymerization reaction of aniline monomer to produce conductive paper sheets containing PANI, PANI/PS composites. Additionally, sliver nitrate (Ag-NO3) was added by varied loadings to the oxidative polymerization of aniline monomer to provide sliver nanoparticles (Ag-NPs) emptied into the prepared paper sheets. The prepared paper sheets were examined using scanning electron microscopy (SEM), X-ray diffraction (XRD) and infrared spectroscopy (IR), the mechanical properties of the prepared paper sheets were evaluated. Moreover, the electrical conductivity and biological studies such as cellulases assay, Microorganism & culture condition and detection of the released of Ag-NPs were evaluated. Furthermore, the prepared paper sheets were displayed good antibacterial properties contrary to gram positive and gram negative bacteria. Consequently, the prepared paper sheet may be used as novel materials for packaging applications.

In this paper, we report highly conductive, highly flexible, light weight and low cost printed graphene for wireless wearable communications applications. As a proof of concept, printed graphene enabled transmission lines and antennas on paper substrates were designed, fabricated and characterized. To explore its potentials in wearable communications applications, mechanically flexible transmission lines and antennas under various bended cases were experimentally studied. The measurement results demonstrate that the printed graphene can be used for RF signal transmitting, radiating and receiving, which represents some of the essential functionalities of RF signal processing in wireless wearable communications systems. Furthermore, the printed graphene can be processed at low temperature so that it is compatible with heat-sensitive flexible materials like papers and textiles. This work brings a step closer to the prospect to implement graphene enabled low cost and environmentally friendly wireless wearable communications systems in the near future.

Carbon nanofibers are an emerging smart material that are promising for use as a biosensor and a biofuel cell transducer material due to their morphological and electrochemical characteristics. In particular, graphitized carbon nanofibers possess unique structures of graphite-like edges within their high surface area that provide a large active site for enzyme attachment. For a specific application such as a biofuel cell, which requires highly stable electrical communication and electricity generation, non-covalent enzyme immobilization using bifunctional molecule is suggested as an appropriate approach because it does not change the carbon hybridization from sp2 to sp3 as covalent immobilization by acid treatment does. Graphitized carbon-nanofiber paper (GCNFp) electrode were fabricated through dispersion-filtration method in which glucose oxidase as model enzyme were immobilized by a bifunctional molecule that forms π-π stacking of the pyrene moiety with the nanofiber wall coupled by a reactive end-amine reaction. This system provides a practical enzyme-electrode hybrid that facilitates comparatively faster enzyme-electrode electrical communication than other system using similar material, as calculated from the heterogeneous electron-transfer rate constant (K(s)) which was 5.45 s(-1).

The integration of paper with an electrochemical device has attracted growing attention for point-of-care testing, where it is of great importance to fabricate electrodes on paper in a low-cost, easy and versatile way. In this work, we report a simple strategy for directly writing electrodes on paper using a pressure-assisted ball pen to form a paper-based electrochemical device (PED). This method is demonstrated to be capable of fabricating electrodes on paper with good electrical conductivity and electrochemical performance, holding great potential to be employed in point-of-care applications, such as in human health diagnostics and food safety detection. As examples, the PEDs fabricated using the developed method are applied for detection of glucose in artificial urine and melamine in sample solutions. Furthermore, our developed strategy is also extended to fabricate PEDs with multi-electrode arrays and write electrodes on non-planar surfaces (e.g., paper cup, human skin), indicating the potential application of our method in other fields, such as fabricating biosensors, paper electronics etc.

This paper describes for the first time the fabrication of pencil drawn electrodes (PDE) on paper platforms for capacitively coupled contactless conductivity detection (C(4) D) on electrophoresis microchips. PDE-C(4) D devices were attached on PMMA electrophoresis chips and used for detection of K(+) and Na(+) in human tear samples. PDE-C(4) D devices were produced on office paper and chromatographic paper platforms and their performance were thoroughly investigated using a model mixture containing K(+) , Na(+) , and Li(+) . In comparison with chromatographic paper, PDE-C(4) D fabricated on office paper has exhibited better performance due to its higher electrical conductivity. Furthermore, the detector response was similar to that recorded with electrodes prepared with copper adhesive tape. The fabrication of PDE-C(4) D on office paper has offered great advantages including extremely low cost ($ 0.004 per unit), reduced fabrication time (5 min), and minimal instrumentation (pencil and paper). The proposed electrodes demonstrated excellent analytical performance with good reproducibility. For an inter-PDE comparison (n = 7), the RSD values for migration time, peak area, and separation efficiency were lower than 2.5, 10.5, and 14%, respectively. The LOD's achieved for K(+) , Na(+) , and Li(+) were 4.9, 6.8, and 9.0 μM, respectively. The clinical feasibility of the proposed approach was successfully demonstrated with the quantitative analysis of K(+) and Na(+) in tear samples. The concentration levels found for K(+) and Na(+) were, respectively, 20.8 ± 0.1 mM and 101.2 ± 0.1 mM for sample #1, and 20.4 ± 0.1 mM and 111.4 ± 0.1 mM for sample #2.