Search

The occurrence of multiple faults is a practical problem in the bearings of rotating machines, and early diagnosis of such issues in an intelligent manner is vital in the era of industry 4.0. The present work investigated various combinations of bearing faults, including dual and multiple fault conditions. Two prevalent fault diagnosis methods were employed: vibration monitoring using time-frequency scalograms extracted through Continuous Wavelet Transform (CWT) and a non-invasive Infrared Thermography (IRT). A 2-D Convolutional Neural Network (CNN) was used to classify various combinations of fault conditions through automated feature extraction. The proposed methodology was validated at two constant speed conditions of 19 Hz and 29 Hz and continuously accelerated and decelerated speed conditions in the range of 19 Hz - 29 Hz. Adequate accuracy was achieved in both dual and multiple fault conditions in the case of vibration-based fault diagnosis, with a range of 99.39 % to 99.97 %. Meanwhile, in the case of proposed IRT-based fault diagnosis, 100 % classification accuracy was achieved for dual and multiple faults in all conditions. These results signify the robustness and reliability of the proposed methodology for dual and multiple fault diagnosis in bearings at constant and varying speed conditions. [ABSTRACT FROM AUTHOR]

Bearings are generally used as bearings or turning elements. Bearings are subjected to high loads and rapid speeds. Furthermore, metal-to-metal contact within the bearing makes it sensitive. In today's machines, bearing failures disrupt the operation of the system or completely stop the system. Bearing failures that can occur can cause enormous damage to the entire system. Therefore, it is necessary to anticipate bearing failures and to carry out a regular diagnostic examination. Various systems have been developed for fault diagnosis. In recent years, deep transfer learning (DTL) methods are often preferred in current bearing diagnosis models, as they provide time savings and high success rates. Deep transfer learning models also improve diagnosis accuracy under certain conditions by greatly reducing human intervention. Diagnosis at the right time is very important for the sustainability and efficiency of industrial production. A technique based on continuous wavelet transform (CWT) and two dimensional (2D) convolutional neural networks (CNN) is presented in this paper to detect fault size from vibration data of various bearing failure types. Time-frequency (TF) color scalogram images for bearing vibration signals were obtained using the CWT method. Using AlexNet, GoogleNet, Resnet, VGG16, and VGG19 deep transfer learning methods with scalogram images, fault size prediction from vibration signals was performed. Five different transfer deep learning models were used for three different data sets. It was observed that the success rates obtained varied between 96.67% and 100%. [ABSTRACT FROM AUTHOR]

The rapid development of photovoltaic (PV) technology and the growing number and size of PV power plants require increasingly efficient and intelligent health monitoring strategies to ensure reliable operation and high energy availability. Among the various techniques, Artificial Neural Network (ANN) has exhibited the functional capacity to perform the identification and classification of PV faults. In the present review, a systematic study on the application of ANN and hybridized ANN models for PV fault detection and diagnosis (FDD) is conducted. For each application, the targeted PV faults, the detectable faults, the type and amount of data used, the model configuration and the FDD performance are extracted, and analyzed. The main trends, challenges and prospects for the application of ANN for PV FDD are extracted and presented. • Applications of ANN techniques and hybrid application for PV FDD are summarized. • Detectable PV faults with ANN technique and diagnosis performance are investigated. • Reported public PV database of 1D data and 2D images are summarized. • Common trends for the selection of model for different PV faults are identified. • Challenges and prospects for PV FDD using ANN techniques are presented. [ABSTRACT FROM AUTHOR]

In this paper, we explore learning methods to improve the performance of the open-circuit fault diagnosis of modular multilevel converters (MMCs). Two deep learning methods, namely, convolutional neural networks (CNN) and auto encoder based deep neural networks (AE-based DNN), as well as stand-alone SoftMax classifier are explored for the detection and classification of faults of MMC-based high voltage direct current converter (MMC-HVDC). Only AC-side three-phase current and the upper and lower bridges' currents of the MMCs are used directly in our proposed approaches without any explicit feature extraction or feature subset selection. The two-terminal MMC-HVDC system is implemented in Power Systems Computer-Aided Design/Electromagnetic Transients including DC (PSCAD/EMTDC) to verify and compare our methods. The simulation results indicate CNN, AE-based DNN, and SoftMax classifier can detect and classify faults with high detection accuracy and classification accuracy. Compared with CNN and AE-based DNN, the SoftMax classifier performed better in detection and classification accuracy as well as testing speed. The detection accuracy of AE-based DNN is a little better than CNN, while CNN needs less training time than the AE-based DNN and SoftMax classifier. [ABSTRACT FROM AUTHOR]