Search

In this study, a series of impact-induced rockburst experiments were carried out by applying multilevel cyclic stresses on a cubic sandstone with a circular opening. Information on rockburst evolution was monitored using video and AE techniques together. Experimental results show that the opening in the sandstone sample was observed to undergo rock grain ejection, rock spalling and buckling in sequence. AE activity under the lower cyclic stress level followed the Kaiser's effect, while the Felicity's effect of AE was also involved at the higher cyclic stress level. Multi-axial cyclic loading can shorten the fatigue life and fatigue strength of the sandstone sample. However, the multi-axial cyclic loading can obviously reduce the AE hits and its energy rate, in which case the proportion of the AE single with low frequency is less than those under the uni-axial cyclic compression. It is also found that the failure zone in the sandstone is characterized by V-shaped notch. The depth of the failure zone is reduced sequentially under uni-axial, bi-axial, and tri-axial cyclic compression, respectively. In contrast, the extent angle of the failure zone will increase. According to the observed profiles of the failure zone, the changes of friction angle of the sandstone are interpreted by the Mohr–Coulomb strength criterion, as well as movement of the failure line due to the fatigue damage. These findings can provide insights into the study of rock failure mechanisms under various dynamic disturbances. Highlights: Impact-induced rockburst in laboratory was simulated by applying uniaxial, bi-axial, and tri-axial cyclic loadings, respectively to cubic sandstone samples with an opening. The opening in the sandstone sample was observed to undergo rock grain ejection, rock spalling and buckling in sequence. AE activity under the lower cyclic stress level can be explained by the Kaiser's effect, while the Felicity's effect of AE was also involved at the higher cyclic stress level. Failure zone around the opening in the sandstone was characterized by V-shaped notch, whose depth of the failure zone was reduced sequentially under uni-axial, bi-axial, and tri-axial cyclic compression. [ABSTRACT FROM AUTHOR]

To explore the effect of rapid excavation unloading under high pressure on delayed rockburst, a true triaxial double-sided rapid unloading rockburst experiment and a biaxial compression failure experiment without unloading were carried out. The results show that the rapid unloading of excavation before the occurrence of rockburst will cause unloading damage, and the axial strain, acoustic emission (AE) count, and AE energy will suddenly increase at the unloading point. The AE source shows that the rapid unloading produces many tensile cracks, mainly distributed near the free surface. The axial peak stress of the rockburst and the stored strain energy before failure are higher than those of biaxial compression, so the ejection velocity of free surface fragments is also higher at failure. [ABSTRACT FROM AUTHOR]

The work aims to experimentally investigate the anisotropic fatigue characteristics of marble with different bedding orientations using uniaxial fatigue experiments and posttest computed tomography (CT) scanning. The impacts of interbed orientation on the strength, deformation, fatigue life, and stimulated fracture pattern were systematically analysed. Results show that the axial, lateral, and volumetric strain curves present a three‐stage deformation and are influenced by the interbed orientation. The volumetric strain is maximum and minimum for a marble sample with 30 and 90° orientation, respectively, which is closely related to the failure mode. The crack pattern in the CT images is related to the interbed orientation; the crack density and scale are the largest for a 90° orientation sample and are the smallest for a 30° orientation sample. Good correlation has been established between the fatigue lifetime and the interbed orientation. It is suggested that anisotropic cyclic behaviours of marble is structurally dependent. [ABSTRACT FROM AUTHOR]