Search

Rubber magnetic composites were prepared by incorporation of barium ferrite in constant amount—50 phr into acrylonitrile-butadiene rubber. Dicumyl peroxide as the curing agent was used for cross-linking of rubber magnets alone, or in combination with four different types of co-agents. The main aim was to examine the influence of curing system composition on magnetic and physical-mechanical properties of composites. The cross-link density and the structure of the formed cross-links were investigated too. The results demonstrated that the type and amount of the co-agent had significant influence on cross-link density, which was reflected in typical change of physical-mechanical properties. The tensile strength increased with increasing amount of co-agents, which can be attributed to the improvement of adhesion and compatibility on the interphase filler-rubber due to the presence of co-agents. Magnetic characteristics were found not to be influenced by the curing system composition. The application of peroxide curing systems consisting of organic peroxide and co-agents leads to the preparation of rubber magnets with not only good magnetic properties but also with improved physical-mechanical properties, which could broaden the sphere of their application uses. [ABSTRACT FROM AUTHOR]

Rubber magnetic composites were prepared by incorporation of strontium ferrites in natural rubber-based elastomer matrix. The work was aimed at the evaluation of magnetic filler influence on physical-mechanical, magnetic and thermal properties of prepared composites. The study was also dedicated to the investigation of microstructure and evaluation of interactions between strontium ferrites and natural rubber. The observed parameters are dependent on the type of ferrite and on the content of applied ferrite, too. Surface modification of ferrite leads to the improvement of interfacial conditions and adhesion between the rubber matrix and the magnetic filler. [ABSTRACT FROM AUTHOR]