Search

In this study, tantalum network nanoparticles are prepared from a Ta 2 O 5 + k Mg system via a liquid magnesium-controlled combustion reaction. Super-stoichiometric amounts of magnesium are used in the preparation of a reaction mixture to produce a liquid magnesium pool capable of lowering the combustion temperature and leading to the formation of Ta network structures. The heat transfer kinetics from the hot reaction zone of 'cold' Mg particles is determined using heat transfer-coupled fluid dynamics simulation software. The formation of network structures is characterized through SEM, TEM, XRD, and BET analysis techniques. The mechanism of network formation is explained based on solid particle collisions in liquid media. Our method is able to produce Ta network structures in which the size of individual particles ranges between 50 and 700 nm. [ABSTRACT FROM AUTHOR]

The synthesis of AlN nanoparticles in non-isothermal high-temperature conditions was developed. The process involved Al 2 O 3 –Mg–NH 4 Cl mixtures preparation and combustion in nitrogen atmosphere. Temperature profiles in the combustion waves were recorded by thermocouples, and the values of combustion temperature and wave velocity were determined from the recorded profiles. The existence of two independed combustion regimes with maximum temperatures of about 850 °C and 1400–1600 °C were revealed based on concentrations of NH 4 Cl. AlN nanocrystals were obtained and investigated by X-ray diffraction, field-emission scanning electron microscopy, transmission electron microscopy, and Brunauer–Emmett–Teller surface area. AlN nanocrystals prepared under non-isothermal combustion process were comprised well distributed multi-faceted particles with an average size of 50–200 nm. The chemical reactions in the combustion wave were discussed and a possible thermochemical pathway for the synthesis of AlN nanoparticles was proposed. [ABSTRACT FROM AUTHOR]

Amorphous boron nanoparticles were synthesized by heating a B 2 O 3 + 3 Mg + k NaCl ( k is the number of moles of NaCl) exothermic mixture in a laboratory oven at 800 °C under argon flow. NaCl was used as inert material to decrease the maximum combustion temperature of the reaction mixture when it was self-ignited after the melting of Mg at 650 °C. The size of the boron nanoparticles extracted from the final product by acid leaching ranged between 30 and 300 nm for k values ranging from 1 to 5. Moreover, increasing the value of k from 1 to 5 resulted in an increase in the specific surface area of the nanoparticles from 40 to 74 m 2 g −1 . However, at k = 10, a decrease in the specific surface area to 47.56 m 2 g −1 was recorded due to incomplete reduction of B 2 O 3 . The ignition point of boron nanoparticles in air as estimated using a thermocouple was approximately 300 °C. Digital camera recording of the combustion process of boron nanoparticles in air revealed that the burning speed of the nanoparticles increased significantly from 0.3 to 15 cm/s when k increased from 1 to 5. [ABSTRACT FROM AUTHOR]