Search

This paper proposes a novel intelligent fault diagnosis method to automatically identify different health conditions of wind turbine (WT) gearbox. Unlike traditional approaches, where feature extraction and classification are separately designed and performed, this paper aims to automatically learn effective fault features directly from raw vibration signals while classify the type of faults in a single framework, thus providing an end-to-end learning-based fault diagnosis system for WT gearbox without additional signal processing and diagnostic expertise. Considering the multiscale characteristics inherent in vibration signals of a gearbox, a new multiscale convolutional neural network (MSCNN) architecture is proposed to perform multiscale feature extraction and classification simultaneously. The proposed MSCNN incorporates multiscale learning into the traditional CNN architecture, which has two merits: 1) high-level fault features can be effectively learned by the hierarchical learning structure with multiple pairs of convolutional and pooling layers; and 2) multiscale learning scheme can capture complementary and rich diagnosis information at different scales. This greatly improves the feature learning ability and enables better diagnosis performance. The proposed MSCNN approach is evaluated through experiments on a WT gearbox test rig. Experimental results and comprehensive comparison analysis with respect to the traditional CNN and traditional multiscale feature extractors have demonstrated the superiority of the proposed method. [ABSTRACT FROM AUTHOR]

Point cloud classification is one of the most important and time-consuming stages of airborne LiDAR (Light Detection and Ranging) data processing, playing a key role in the generation of cartographic products. This paper describes an innovative algorithm to perform LiDAR point-cloud classification, which relies on Convolutional Neural Networks (CNNs) and takes advantage of full-waveform data registered by modern laser scanners. The proposed method consists of two steps. First, a simple CNN is used to preprocess each waveform, providing a compact representation of the data. By exploiting the coordinates of the points associated with the waveforms, output vectors generated by the first CNN are then mapped into an image that is subsequently segmented by a Fully Convolutional Network (FCN): a label is assigned to each pixel and, consequently, to the point falling in the pixel. In this way, spatial positions and geometrical relationships between neighboring data are taken into account. These particular architectures allow to accurately identify even challenging classes such as power line and transmission tower. [ABSTRACT FROM AUTHOR]

In order to better interpret polarimetric synthetic aperture radar (PolSAR) images, many scholars tend to do target decomposition for PolSAR images and utilize the obtained features to perform subsequent classification. These target decomposition features play an important role in terrain classification but completely utilizing them produces a high computational complexity. Furthermore, some features have a negative impact on the classification task. Therefore, selecting the appropriate amount of high-quality features is of great significance to the classification task. In this paper, we propose a convolutional neural network (CNN)-based feature selection algorithm for PolSAR image classification. First, we design a 1-D CNN for feature selection, then train the designed network with all the decomposition features to obtain a trained model. Second, the Kullback–Leibler distance (KLD) between different features is utilized as a standard to select feature subsets. Third, feature subsets with excellent performance form the final results. Due to the special structure of the 1-D CNN, repetitively training model is avoided when the input changes. Different from traditional feature selection methods, our method considers the performance of features combination rather than single feature contribution. To this end, the feature subsets selected by the proposed method are more useful to the classification task. Innovatively introducing KLD in the selection stage avoids random selection and improves the selection efficiency. Finally, we validate the performance of selected feature subsets in traditional and deep learning classification frameworks. Experiments demonstrate that features selected by the proposed method have a good performance comparing with others on three real PolSAR data sets. [ABSTRACT FROM AUTHOR]

Hyperspectral image (HSI) classification is a core task in the remote sensing community, and recently, deep learning-based methods have shown their capability of accurate classification of HSIs. Among the deep learning-based methods, deep convolutional neural networks (CNNs) have been widely used for the HSI classification. In order to obtain a good classification performance, substantial efforts are required to design a proper deep learning architecture. Furthermore, the manually designed architecture may not fit a specific data set very well. In this paper, the idea of automatic CNN for the HSI classification is proposed for the first time. First, a number of operations, including convolution, pooling, identity, and batch normalization, are selected. Then, a gradient descent-based search algorithm is used to effectively find the optimal deep architecture that is evaluated on the validation data set. After that, the best CNN architecture is selected as the model for the HSI classification. Specifically, the automatic 1-D Auto-CNN and 3-D Auto-CNN are used as spectral and spectral–spatial HSI classifiers, respectively. Furthermore, the cutout is introduced as a regularization technique for the HSI spectral–spatial classification to further improve the classification accuracy. The experiments on four widely used hyperspectral data sets (i.e., Salinas, Pavia University, Kennedy Space Center, and Indiana Pines) show that the automatically designed data-dependent CNNs obtain competitive classification accuracy compared with the state-of-the-art methods. In addition, the automatic design of the deep learning architecture opens a new window for future research, showing the huge potential of using neural architectures’ optimization capabilities for the accurate HSI classification. [ABSTRACT FROM AUTHOR]

Recently, multimodal cloud samples are utilized to learn completed feature representations for cloud classification. However, the existing methods neglect the related information from other multimodal cloud samples in the learning process, which leads to inadequate learning. In this article, we propose a novel deep model to learn heterogeneous deep features (HDFs) for multimodal ground-based remote sensing cloud classification. Specifically, we first design the convolutional neural network (CNN) extractor to combine the visual information and the multimodal information (MI) to obtain the CNN-based features of multimodal cloud samples. Afterward, we treat the CNN-based features of multimodal cloud samples as the nodes of graph, and utilize the similarity between nodes as the adjacency matrix. We feed the graph and the adjacency matrix into the graph convolutional network (GCN) extractor to obtain the GCN-based features that could capture correlations among multimodal cloud samples using graph convolutional layers. After obtaining CNN-based features and GCN-based features, we concatenate the two kinds of heterogeneous features to represent the multimodal cloud samples. As a result, the concatenated feature contains the visual information, the MI and the related information among multimodal cloud samples. We conduct a series of experiments on the multimodal ground-based cloud database (MGCD), and the experimental results verify that the proposed HDF outperforms state-of-the-art methods. [ABSTRACT FROM AUTHOR]

A standard screening procedure involves video endoscopy of the Gastrointestinal tract. It is a less invasive method which is practiced for early diagnosis of gastric diseases. Manual inspection of a large number of gastric frames is an exhaustive, time-consuming task, and requires expertise. Conversely, several computer-aided diagnosis systems have been proposed by researchers to cope with the dilemma of manual inspection of the massive volume of frames. This article gives an overview of different available alternatives for automated inspection, detection, and classification of various GI abnormalities. Also, this work elaborates techniques associated with content-based image retrieval and automated systems for summarizing endoscopic procedures. In this survey, we perform a comprehensive review of feature extraction techniques and deep learning methods which were specifically developed for automatic analysis of endoscopic videos. In addition, we categorize features extraction techniques according to image processing domains and further we classify them based on their visual descriptions. We also review hybrid feature extraction techniques which are developed by the fusion of different kind of basic descriptors. Moreover, this survey covers various endoscopy data-sets available for the bench-marking of vision based algorithms. On the basis of literature, we explain emerging trends in computerized analysis of endoscopy. We also survey important issues, challenges, and future research directions to the development of computer-assisted systems for detection of maladies and interactive surgery in the GI tract. [ABSTRACT FROM AUTHOR]