Search

In this work, we propose and demonstrate an integrated dual linearly polarized cavity-backed patch antenna, which is excited by a concurrent dual-mode substrate integrated waveguide (SIW) structure. For the first time, we have exploited the TE10 and TE20 modes of a traveling wave in a dual-mode SIW configuration to excite the horizontal and vertical polarizations of the patch antenna. The proposed methodology yields a low-profile structure with a high interport isolation thanks to the inherent symmetry of the structure. Measurement results indicate an isolation performing better than 42 dB over a 600 MHz impedance bandwidth of the antenna. Moreover, a methodology is developed to implement transitions from the dual-mode SIW to the two different TEM transmission lines for separate but concurrent excitations of the device. Detailed field and impedance analyses are presented to explain the operation principle of the proposed antenna, which are supported by an excellent agreement between the obtained measurement and simulation results. [ABSTRACT FROM AUTHOR]

The gain bandwidth constraint of sequential-rotation arrays (SRAs) has been an open issue since it was first pointed out in 1989. This paper reveals the reason, provides some useful conclusions and proposes an optimum design. Firstly, a first-order analytical formula is derived for the array factor (AF) of the 4-element sub-SRA. The formula embraces the polarization properties of the antenna elements. The AF is found to be dependent on the elements' polarization properties and frequency, which is not found in conventional regular arrays. Based on the theoretical results and full-wave simulations, these dependencies are analyzed in detail. Secondly, an optimum design is proposed to enhance the gain bandwidth: to constitute SRA with elliptically polarized elements (this type of SRA is denoted as EP-SRA) rather than the conventional circularly polarized elements (this type of SRA is denoted as CP-SRA). Detailed design guidance is presented for this new method. Finally, as an example, a CP-SRA and an EP-SRA are designed and tested for comparison. According to the example, by employing EP-SRA, the 1 dB AF bandwidth is improved by 80%, the measured 1 dB/3 dB gain bandwidth is enhanced by 114%/76%. In fact, the conventional CP-SRA and LP-SRA (SRA with linearly polarized elements) are two special cases of the proposed EP-SRA. [ABSTRACT FROM PUBLISHER]