Search

This paper employs an overhang structure for axial flux permanent magnet motor to enhance the torque density. However, the overhang structure requires a computationally expensive 3-D finite-element method (FEM) for analysis, because a quasi-3-D FEM cannot be applied to such a geometry. Thus, in order to reduce the computational cost of above-mentioned topology, this paper adopts a field reconstruction method (FRM). The conventional FRM is applicable only in the case, where the slot pitch to teeth length ratio is the same along radial direction. To address this problem, we introduce a virtual air gap concept so that it can take into account parallel slot effect as well as overhang effect. In this paper, the effectiveness of the proposed method is verified by the 3-D FEM and experimental results. [ABSTRACT FROM AUTHOR]

This paper presents performance improvements of a double excitation synchronous motor by using a reluctance network (RN). The distinguishing feature of the double excitation principle is to use permanent magnets with high energy, while air-gap flux is flexibly controlled by field windings. Therefore, the first contribution of this paper focuses on maximizing air-gap flux range control. Second, an approach for torque ripple reduction is proposed by directly modifying air-gap flux according to the instantaneous torque profile. The achieved resultant torque stays almost constant for a case study. The validity of the RN method is examined by comparisons with 3-D finite element and experimental results for several machines. [ABSTRACT FROM AUTHOR]

Recently, dual-rotor motor (DRM) has emerged as an alternative for an induction motor (IM) or a permanent-magnet (PM) motor for electric vehicle application, due to its better drive performance and better torque density. This paper presents an analytical model for the hybrid IM-PM configuration of DRM. The analytical model can be used to predict induced bar currents, electromagnetic torque generated, and magnetic fields in various regions of the motor. The mentioned calculations are performed under steady-state conditions. The analytical method is developed using the subdomain model approach in 2-D polar coordinates. Appropriate governing equations along with boundary conditions across all the sub-domain regions of the DRM are employed to calculate the magnetic vector potential in all the regions. The developed analytical model has been validated with finite-element analysis for various operating conditions, and high accuracy has been achieved for all the results. [ABSTRACT FROM AUTHOR]

This paper focuses on the comparative analysis of modular spoke-type permanent magnet machines with two magnetization modes, which are referred to as M-I and M-II types. The analytical models of the proposed machines are built based on the simple magneto-motive-force-permeance method. With the help of finite element analysis and the analytical models, magnetic fields in machines with different magnetization modes are compared. Then, taking as a base an existing commercial in-wheel machine used in an electric motorcycle, two proposed machines with different magnetization modes are designed as in-wheel traction machines and compared with respect to electromagnetic torque, flux-weakening performance, over-load capability, etc. The machines are prototyped and experimentally tested to verify the prediction that the M-II machines exhibit a higher torque output whereas the M-I machines have a wider speed range. [ABSTRACT FROM AUTHOR]

This paper aims to analyze the characteristics of a surface permanent-magnet Vernier motor (SPMVM) according to the pole ratio among the rotor magnet pole pairs, stator teeth, and winding pole number. The SPMVM has the same operational principle as a magnetic gear, and it is operated using the space harmonics of the air-gap flux density due to the magnetomotive force and air-gap permeance. In this paper, first, the design parameters of the SPMVM are specified based on an analytical calculation of the air-gap magnetic flux density. Moreover, various combinations of the rotor magnet pole pairs and stator teeth number are made and compared according to the operational principle of a Vernier motor using a 2-D finite-element method. [ABSTRACT FROM AUTHOR]

Partial demagnetization is a condition that may occur in Permanent Magnet machines due to overloading or thermal stress. Whenthis happens, the magnetic field locally weakens leading to an asymmetry of the air-gap field. This asymmetry will cause harmonics, which will be expressed as extra losses and mechanical oscillations. Moreover, since the field becomes weaker, more current is required to serve the load leading to less efficiency, increased losses and consequently increase of the temperature, which will cause further progression of the demagnetization severity until a total machine breakdown. Several methods have been proposed in the literature for the online detection of the demagnetization, however they have not related the fault to the manufacturing characteristics of the machine, which play an important role on the expected harmonic index and the associated fault signatures. This paper presents for the first time a detailed analytical investigation of the expected harmonics in the stator current spectrum in case of demagnetization, as a function of the stator winding and number of poles. The analytical results are verified by extensive simulations via the finite element method and experimental testing. [ABSTRACT FROM AUTHOR]

In previous studies, the field winding of the brushless pulsed alternator (BPA) is embedded in the stator slots, which is supplied by dc power or variable frequency power. The advantage is that the field current can be independently adjusted. It means that the BPA system needs a standalone excitation system, which will increase the volume and cost of the system. If we substitute electric excitation for permanent magnet excitation, not only the volume and cost of the BPA system can be decreased but the efficiency and flexibility can be enhanced. In this paper, the design schemes for electric excitation and permanent magnet excitation BPA are presented. For comparison, the stator and rotor dimensions of the two kinds of BPA are both the same. The characteristics of electric excitation and permanent magnet excitation BPA are analyzed by the finite-element method and field-circuit coupling method. Finally, the BPA systems with a resistive load are established, the performances of both the two excitation modes are compared. According to the simulation results, we conclude their advantages and disadvantages. [ABSTRACT FROM AUTHOR]

This paper aims to identify the optimal number of flux modulation pole (FMP) in Vernier permanent magnet synchronous machines (VPMSMs) with concentrated tooth-coil windings. First, the influence of number of FMP on machine performance is revealed based on the unified permanent magnet magnetomotive force permeance analytical model. It is found that for a fixed stator slot number, there always exists an optimal number of FMP to maximize the torque, thanks to the enhanced contribution by the fundamental permeance harmonic. Then, the influence of critical dimensional parameters, including the machine diameter, the permanent magnet thickness, and the width of FMP, on the electromagnetic performance of VPMSMs with different numbers of FMP are parametrically analyzed by both analytical and finite element analyses. Results show that the VPMSMs with the optimal number of FMP always have advantages of a higher torque density together with a reduced PM volume, particularly for those with a relatively large diameter. Finally, two VPMSM prototypes with different numbers of FMP are manufactured and tested to validate the analyses. [ABSTRACT FROM AUTHOR]

Linear permanent magnet Vernier machines (LPMVMs) is an attractive solution for stroke and direct-drive applications. Several LPMVM topologies have been presented for different applications that operate based on magnetic flux modulation. LPMVMs have some advantages including high force, and torque density at low speeds. This paper introduces a double-excited linear Vernier machine for wave energy conversion. To model the machine, finite element analysis and nonlinear equivalent network model are used. To improve the accuracy of the model and compact the network, a new meshing method is proposed. For better continuity in the output waveforms of the machine, special positioning is utilized. The end-effect is modeled using two separate networks. Finally, the modeling and simulation results are compared with each other and validated experimentally. [ABSTRACT FROM AUTHOR]

This paper aims to comprehensively analyze the influence of number of permanent magnet (PM) pieces on electromagnetic performance of flux reversal permanent magnet (FRPM) machines. First, the unified analytical model of FRPM machines having different numbers of PM pieces is established, from which the optimal number of PM pieces and the corresponding rotor pole number can be identified. It shows that by employing the optimal number of PM pieces instead of the conventional two on each stator tooth, additional back-EMF component can be generated which is beneficial to boost the machine performance. Then, the influence of critical design parameters including stator slot opening ratio, split ratio, and stator slot number is investigated, providing a guidance to the design of FRPM machines aiming at maximum output torque. In addition, both finite element analyses and experimental tests are conducted to verify the analytical analyses. For 6-slot-stator FRPM machines, experimental results show that more than 40% higher output torque can be achieved in the machine with optimal number of PM pieces when compared to the conventional one. [ABSTRACT FROM AUTHOR]

Permanent-magnet vernier machine has an excellent potential for electric vehicles due to its desirable features of a simple mechanical structure and high torque density, whereas the poor power factor is its main drawback. In this paper, a spoke-type permanent-magnet vernier machine is designed and optimized for torque density and power factor improvement. First, the machine structure, operation principle, and sizing equation are introduced. Then, the machine is optimized by a multi-objective genetic algorithm. To enhance the optimization efficiency and accuracy, multi-level, sensitivity analysis, and approximate model technologies are employed in the optimization. It is shown that the improved torque density and power factor are achieved in the optimized machine as compared to the initial one. Finally, a prototype machine is built, and the experiments on the prototype machine are carried out to verify the design optimization. [ABSTRACT FROM AUTHOR]

This paper formulates the difference in base frequency and maximum torque between distributed and concentrated windings taking into account the air-gap modulation of concentrated-winding permanent magnet (PM) motors. The design superiority is typically confirmed for each winding type during a development period by using time-consuming finite element analysis (FEA). We propose a quantification that enables motor designers to easily judge, at the initial design stage, a superior winding type and to shorten a design period. Throughout our formulation, we found that the distributed-winding PM motors, in principle, have larger q-axis inductance and smaller d-axis inductance than the concentrated-winding motors, which leads to a decrease in the base frequency. On the other hand, the distributed winding inherently has higher winding factor and needs shorter stack length of core than the concentrated winding for identical torque output, which results in an increase in the base frequency. And also, we theoretically quantified the difference in reluctance-torque contribution between the two winding types and found that it was too small to have much impact on practical design. We applied the proposed formulae to a 0.2-kW concentrated-winding Nd-Fe-B magnet motor and were able to quantify the base frequency, the maximum torque, and the minimum stack length of core for a distributed-winding motor with high accuracy without having to rely on FEA. The FEA and measurement results demonstrated the validity of the proposed approach for the fabricated distributed-winding PM motor. [ABSTRACT FROM AUTHOR]

This paper presents a simple analytical model for two types of three-phase surface-mounted permanent magnet machines: modular and unequal tooth (UNET) width machines with different slot/pole number combinations. It is based on the slotless open-circuit air-gap flux density and the slotted air-gap relative permeance calculations. This model allows calculating the opencircuit air-gap flux density, phase flux linkage, back electromotive force, and average torque of both the modular and UNET machines. Its accuracy has been validated by the 2-D finite-element (FE) method. A flux focusing/defocusing factor has also been introduced to analyze the influence of flux gaps in alternate stator teeth of modular machines on the machine electromagnetic performances. It has been found that by properly choosing the slot/pole number combination and flux gap width, the open-circuit air-gap flux density, the winding factor, and the flux focusing effect can all be improved. As a result, the performance of the modular machine can be significantly boosted. The analytical and FE models have been validated by experiments. [ABSTRACT FROM AUTHOR]

In this paper, a hybrid-excited vernier permanent magnet (PM) machine is proposed. Two excitation sources, namely, the PM excitation and the electrical excitation are artfully combined together based on the homopolar topology, resulting in a parallel hybrid excitation. The flux regulation capability of the proposed machine is discussed and analyzed. Unlike other hybrid-excited machines, the flux regulation is realized based on the variation of the armature flux linkage rather than directly adjusting the air-gap flux. Performances of the bi-directional flux regulation are evaluated by the 3-D finite-element method. In order to verify the analytical results, the proposed machine is prototyped and tested as a generator. Both no-load and on-load performances are assessed. The experimental results agree well with the analytical ones. [ABSTRACT FROM AUTHOR]

This paper investigates the no-load and the on-load behavior of a fractional-slot tubular-linear permanent magnet synchronous machine (T-LPMSM). The study is initiated by the selection of the machine slot-pole combination. To do so, a formulation of the air gap flux density, based on the solution of the magnetic potential vector equation in the air gap and in the PM regions, is derived. The electromagnetic model allows the prediction of the phase back electromotive forces (EMFs) and of the cogging force. The effect of the slot-pole combination on these features is then considered to the aim of the optimal selection of the slot per pole and per phase. A case study considering the optimized slot per pole and per phase number is treated where the analytically predicted no-load features are validated by finite element analysis (FEA). The investigation is extended to the on-load characteristic which is predicted by FEA and is validated by experiments. [ABSTRACT FROM PUBLISHER]

Electromagnetic design of a 1.12-MW, 18 000-r/min high-speed permanent-magnet motor (HSPMM) is carried out based on the analysis of pole number, stator slot number, rotor outer diameter, air-gap length, permanent magnet material, thickness, and pole arc. The no-load and full-load performance of the HSPMM is investigated in this paper by using 2-D finite element method (FEM). In addition, the power losses in the HSPMM including core loss, winding loss, rotor eddy current loss, and air friction loss are predicted. Based on the analysis, a prototype motor is manufactured and experimentally tested to verify the machine design. [ABSTRACT FROM PUBLISHER]

Axial flux permanent magnet (AFPM) motors are suitable options for solar-powered vehicles due to their compact structure and high torque density. Furthermore, certain types of AFPM machines may be configured without stator cores, which eliminates associated losses and cogging torque and simplifies the manufacturing and assembly. This paper examines two machine designs for use in the solar-powered vehicle of the challenger class—a single rotor, single stator conventional AFPM machine, and a coreless AFPM machine with multiple stator and rotor disks. The response surface methodology (RSM) is utilized for the systematic comparison of the conventional and coreless topologies and to select the optimum designs among several hundreds of candidates. Designs with minimum losses and mass producing required torque with larger air-gap are favored. The performance of the selected designs has been studied via three-dimensional finite element analysis (FEA). The FEA parametric modeling methodology is validated by measurements on three AFPM machines of the conventional and coreless type. [ABSTRACT FROM AUTHOR]

Analytical calculation methods for all the major components of the synchronous inductance of tooth-coil permanent-magnet synchronous machines are reevaluated in this paper. The inductance estimation is different in the tooth-coil machine compared with the one in the traditional rotating field winding machine. The accuracy of the analytical torque calculation highly depends on the estimated synchronous inductance. Despite powerful finite element method (FEM) tools, an accurate and fast analytical method is required at an early design stage to find an initial machine design structure with the desired performance. The results of the analytical inductance calculation are verified and assessed in terms of accuracy with the FEM simulation results and with the prototype measurement results. [ABSTRACT FROM PUBLISHER]

This paper proposes a novel rotor contour design for variable reluctance (VR) resolvers by injecting auxiliary air-gap permeance harmonics. Based on the resolver model with nonoverlapping tooth-coil windings, the influence of air-gap length function is first investigated by finite element (FE) method, and the detection accuracy of designs with higher values of fundamental wave factor may deteriorate due to the increasing third order of output voltage harmonics. Further, the origins of the third harmonics are investigated by analytical derivation and FE analyses of output voltages. Furthermore, it is proved that the voltage harmonics and the detection accuracy are significantly improved by injecting auxiliary air-gap permeance harmonics in the design of rotor contour. In addition, the proposed design can also be employed to eliminate voltage tooth harmonics in a conventional VR resolver topology. Finally, VR resolver prototypes with the conventional and the proposed rotors are fabricated and tested respectively to verify the analyses. [ABSTRACT FROM PUBLISHER]

This article proposes an analytical model of modular spoke-type permanent magnet (MSTPM) machines based on air-gap field modulation (AFM) theory. Firstly, a fundamental AFM model of open-circuit MSTPM machines is introduced. The open-circuit air-gap field of MSTPM machines is determined by three fundamental elements including the primitive magnetizing magnetomotive force (MMF) produced by permanent magnet (PM), and two modulators which consist of stator and rotor permeance. The analytical MMF excited by PM (PM-MMF) can be calculated by using magnetic circuit method, while the stator and rotor permeance models are developed based on relative permeance (RP) method. Thereafter, a general model is proposed to calculate the open-circuit back electromotive force (EMF) of MSTPM machines. Further, the winding inductance model is established on the basis of equivalent magnetic circuit method and RP model. Finally, the machine performance is predicted by the analytical model, and verified by both finite element analysis (FEA) and experimental results. [ABSTRACT FROM AUTHOR]

Variable reluctance resolvers (VRRs) have been widely used for rotor position detection in harsh working conditions. However, conventional installation of VRRs inevitably occupies the axial space of machine systems, and may weaken the reliability of rotor position detection encountering shock and vibration. In this article, a novel VRR structure with inner stator is investigated, which is radially integrated inside a permanent magnet synchronous machine (PMSM) to construct compact machine topology. The hybrid machine topology is first discussed, and detailed electromagnetic design is carried out. Improved analytical analysis on air gap flux density distribution and inductance evaluation of the integrated VRR is derived based on modified winding function approach, and testified by finite element analysis. A prototype is manufactured from an existing 2.2 kW PMSM, and experiments are conducted to validate the effectiveness of proposed machine topology. [ABSTRACT FROM AUTHOR]

In this article, an axial-flux permanent-magnet (PM) Vernier machine with the triple-stator, spoke-type PM rotor, and toroidal winding wound on the innerstator is proposed. Benefited from the flux focusing spoke-type PM rotor and short end length toroidal winding, the proposed machine has a high torque density and the improved power factor. Based on the air-gap permeance function, the analytical expression of the proposed machine is derived to qualitatively analyze the machine's performance. The quasi-three-dimensional (3-D) finite element analysis (FEA) is adopted to optimize the design parameters, such as innerstator diameter, PM thickness, and slot opening width. The quasi-3-D FEA results match well with the 3-D FEA. The 3-D FEA results show the torque densities of the proposed machine reach 49.4 Nm/L and 11.4 Nm/kg, respectively, under the 232 A/cm average electrical loading. The performances, such as overload capacity, PM demagnetization, and PM and core losses, are also analyzed by 3-D FEA. The comparison with the other axial-flux PM Vernier machine is conducted, and the results reveal that the proposed machine has the great advantages of the torque density and power factor. Since the prototype is not built, in this article, the assembly scheme and thermal behavior of the proposed machine are discussed. [ABSTRACT FROM AUTHOR]

A dual-stator Vernier permanent magnet (DSVPM) machine is proposed in this article for improving the power factor. Compared with the conventional single-stator Vernier permanent magnet (SSVPM) machine with the surface-mounted permanent magnet rotor, the proposed DSVPM machine has the higher power factor and the overload capacity. The reason for the higher power factor and the overload capacity in DSVPM machines is explained theoretically in this article by air gap permeance theory, and the advantages of the power factor and overload capacity of DSVPM machine are verified by the finite element analysis (FEA) through 18-slots and 34-poles SSVPM and DSVPM FEA model. The rotor eddy current losses, core losses and magnet demagnetization ratio of the DSVPM and SSVPM machines are also studied in this article, the FEA results reveal eddy current and core losses and magnet demagnetization ratio are all lower in the proposed DSVPM machine. The power factor of DSVPM machine variation with the magnet thickness and pole ratio (the ratio of the rotor pole pair number to the stator pole pair number) is also researched by the theoretical and FEA methods. In this article, a surface-mounted permanent magnet machine with fractional-slot concentrated-winding is designed to compare the torque density and cost with DSVPM machine. The sandwiched rotor structure of the proposed DSVPM machine is discussed and the structural analysis by three-dimensional FEA is carried out to prove the feasibility of rotor support, the result reveal that the rotor structure has the sufficient strength. [ABSTRACT FROM AUTHOR]

Recently, linear permanent magnet vernier machine (LPMVM) is attracting more and more attention due to its high thrust density, high efficiency, and simple structure at low-speed operation, which makes it a preferable solution for direct-drive linear motion applications. In order to further reduce the thrust ripple and the cost of LPMVM, a novel consequent-pole modular-mover LPMVM (CM-LPMVM) is proposed and analyzed in this article. Due to the dual-flux-modulation effect, the proposed CM-LPMVM can exhibit a low thrust ripple (∼3.2% of the average thrust) and high thrust density (∼387 kN/m3) at a low current density of 3 A/mm2, as well as reduce nearly half of the PM usage at the same time. The performance improvement of the proposed CM-LPMVM is verified by the comparison to a regular modular-mover LPMVMs, using the finite-element method. Finally, three prototypes are built and tested. The experimental results match well with the analytical data, showing the superiority of the proposed CM-LPMVM. [ABSTRACT FROM AUTHOR]

This article investigates a hybrid-excited doubly salient permanent magnet linear machine (HDSPMLM) with dc-biased armature current. With the adoption of integrated open winding, dc bias can be achieved by zero-sequence current, which helps to enhance the dc excitation and further highly improves the thrust force density. First, the machine topology and drive circuit are described. By injecting the dc currents into the armature windings with special arrangement, the dc field windings in conventional HDSPMLM can be eliminated, where the phase currents are dc-biased sinusoidal currents. Then, magnetomotive force-permeance model is built to analytically calculate the air gap hybrid-excited field harmonics, and further verified by finite element analysis. Moreover, the flux linkage, back-electromotive force, and static force-current characteristics between the proposed and conventional HDSPMLMs are comparatively studied. Thanks to the improved exciting field and armature magneto-motive force with integrated open winding, the thrust force capability can be significantly enhanced by 85.5% on the premise of rated power dissipation. The proposed machine is suitable for the operation of short-time large-thrust condition. Finally, the experiments on a prototype of the HDSPMLM are carried out for validation. [ABSTRACT FROM AUTHOR]

The split ratio, defined as the outer radius ratio of the magnet to stator, has been investigated and optimized in surface-mounted permanent magnet (PM) machines having conventional/novel pieced Halbach magnet array. The air-gap magnetic field in PM machine with novel pieced Halbach magnet has been analytically obtained. The influences of split ratio and magnet arc length ratio on the torque density have been separately and analytically investigated for the machines with conventional pieced Halbach magnet array. In order to achieve the maximal torque density in the conventional pieced Halbach magnetized machines, the optimum split ratio and/or pole arc ratio have been obtained. In addition, the influences of one or both of the split ratio and magnetization angle on the torque density have been analytically investigated for the machines with novel pieced Halbach magnet array. In order to achieve the maximal torque density in the novel pieced Halbach magnetized machines, the optimum split ratio and/or magnetization angle have been determined. Finally, the linear analytical predictions have been compared with linear and nonlinear finite element analyses. [ABSTRACT FROM AUTHOR]

This article proposes a novel structure of consequent pole dual rotor permanent magnet vernier machine (CPDRVM). This structure consists of dual-sided stator in which windings are placed on the stator slots and magnets placed on the inner and outer rotor slots. Operation principles of the proposed VM carried out using flux modulation theory. The Finite Element analysis is utilized in order to evaluate the effect of magnet geometry on the produced torque and power factor. The motor characteristics and performance assessment are performed numerically. Furthermore, the parametric and sensitivity analysis are used to optimize the motor geometry. The proposed VM compared with PM machine and two conventional VMs. In this regard, performance indices such as flux, cogging torque, power factor, magnet volume, torque per magnet volume, Back-EMF, losses and efficiency profiles are calculated and compared. Results evidence better performance of the proposed structure. In fact, CPDRVM could produce higher torque density than conventional VMs. In addition, high power factor is reached for suggested topology. [ABSTRACT FROM AUTHOR]

The article deals with designing rotor disks of a double-sided axial flux permanent magnet machine, based on their deflection, due to the pull forces between opposite rotor disks, caused by the permanent magnets. Permanent magnets cause the magnetic flux density to flow between the permanent magnets on opposite rotor disks and its size determines the size of the pull force. That is why it is essential to determine the size of the axial component of magnetic flux density in the middle of the clearance between opposite rotor disks (fictitious air gap) in order to calculate the deflection of the rotor disks. The article presents a new method for determining the size of the axial component of magnetic flux density, based on a simplified finite element method and an approximation method as well as modified equations for determining the deflection of rotor disks. The method is used to determine the pull forces between rotor disks and based on the deflection of the disks an optimum rotor disk thickness can be selected in order to reduce the weight of the machine. [ABSTRACT FROM AUTHOR]

This article presents the design and analysis of a 12/7 (numbers of stator/rotor poles) hybridly excited asymmetric stator pole doubly salient machine (HEASPDSM) with a main focus on the special topology and operational principle by using the analytical and 2-D finite element analysis. A full comparison is conducted on the average torque, torque ripples, no-load back electromotive force and flux regulation capacity under the condition of different structural parameters, which can provide good references to the machine design. A 12/7 HEASPDSM is designed and the main performance indexes are analyzed in detail. Based on the parameters, the performance of 12/7 HEASPDSM is compared with traditional 6/7 doubly salient permanent magnet machine (DSPMM) with the same volume and thermal load. Finally, a prototype of the 12/7 HEASPDSM is manufactured and tested to validate the theoretical analysis. The results fully demonstrate that the HEASPDSM possesses the merits of strong flux regulation capability, higher torque density, and wider constant power speed range benefitted from the dc field winding than the traditional DSPMM. [ABSTRACT FROM AUTHOR]

A novel partitioned primary linear switched flux permanent magnet (PLSFPM) machine is presented, which adopts an odd number of primary poles. For the design objective of minimum thrust ripple, the optimized novel PLSFPM machine with 9 primary/10 secondary (9/10) pole combination is obtained. To this optimized PLSFPM machine, the electromagnetic performance is analyzed in detail and compared with that of the original one. The merits of this 9/10 pole combination are also proved by comparative study with other three available pole combinations. Moreover, comparison between the proposed PLSFPM machine and a conventional linear switched flux permanent magnet machine has been performed, which shows that the proposed machine can achieve better performances under both open-circuit and load conditions. The corresponding prototype is manufactured and the influences of possible machining errors during manufacture on thrust force performance are discussed. Finally, the experiment is carried out, which verifies the predicted results. The research shows that the proposed PLSFPM machine with 9/10 pole combination has high thrust force and low thrust ripple. [ABSTRACT FROM AUTHOR]