Search

The light-absorbing organic aerosol (OA), known as brown carbon (BrC), has important radiative impacts; however, its sources and evolution after emission remain to be elucidated. In this study, the light absorption at multiple wavelengths, mass spectra of OA and microphysical properties of black carbon (BC) were characterized at a typical suburban environment in Beijing. The absorption of BC is constrained by its size distribution and mixing state, and the BrC absorption is obtained by subtracting the BC absorption from the total aerosol absorption. Aerosol absorption was further apportioned to BC, primary BrC and secondary BrC by applying the least correlation between secondary BrC and BC. The multilinear regression analysis on the factorized OA mass spectra indicated that the OA from traffic and biomass burning emission contributed to primary BrC. Importantly, the moderately oxygenated OA (O / C = 0.62) was revealed to highly correlate with secondary BrC. These OA had higher nitrogen content, in line with the nitrogen-containing functional groups detected by the Fourier transform infrared spectrometer. The photochemical processes were found to reduce the mass absorption cross section (MAC) of primary OA, reducing its contribution to total absorption by 20 %, at the same time increasing MAC for secondary OA, which showed a 30 % enhancement in contribution to total absorbance, implying the concurrent whitening and darkening of BrC. This provides field evidence that the photochemically produced secondary nitrogen-containing OA can considerably compensate for some bleaching effect on the primary BrC, hereby causing radiative impacts. [ABSTRACT FROM AUTHOR]

The physical properties of black carbon (BC) including the mass loading, size distribution and mixing state were in-situ characterized by aircraft measurements using a single particle soot photometer (SP2) in the lower troposphere over Beijing area. The flights were conducted in both late spring and winter during the daytime with well-developed planetary boundary layer (PBL). The BC mass in the PBL (BC PBL) in late spring showed no apparent vertical gradient nor correlation with the PBL height (PBLH) due to strong convective mixing; in winter the BC PBL was more concentrated near ground and anti-correlated with the PBLH due to dilution effect of the dominant cleaner northerly air masses at higher altitude. The BC mass loading at height h , C(h) within the PBL can be extended from the surface level (C0) in late spring; for levels above the PBL, C(h) can be parameterized by applying an exponential decline function C(h) = C0*exp(h/hs) , with the scale height (hs) of 0.31 ± 0.16 km and 0.66 ± 0.24 km for late spring and winter respectively. This parameterization excluded the profiles for: turbulent conditions when the BC mass was efficiently vented upwards and diluted, expressed as C(h) = C0 up to the top of the PBL; or in periods of strong southerly advection, when the entire column was significantly influenced by regional transport from the polluted south regions. The BC core mass median diameters (MMD) were commonly populated at 205–220 nm in both seasons, with additional mode of MMD ∼195 nm also frequently observed in late spring. The bulk relative coating thickness of BC (coated diameter divided by uncoated core diameter D p /D c) in the PBL mostly populated at 2.0–2.2 but at ∼1.2–1.6 in the lower free troposphere (FT). The mass absorption cross section of BC at 550 nm (MAC550), constrained by the SP2 measurements, was largely influenced by the coating thickness, was relatively consistent in the PBL at ∼8.6 m2 g−1, but reduced to 7–7.5 m2 g−1 in the FT or turbulent condition due to decreased coatings. The BC was found to exhibit smaller particle size in the FT but larger in the PBL, which may imply larger BC have been scavenged by low-level clouds. The BC particles trapped in the PBL or regionally transported from polluted region represent the most absorbing element in the particulate matter population and should be particularly considered in evaluating the radiative forcing impact of aerosols over this region. • Vertical profiles of black carbon physical properties in the lower troposphere were in-situ characterized over Beijing. • Black carbon at different layers was influenced by seasonal emission and meteorological conditions. • These results will improve modelling on black carbon radiative forcing and constrain remote sensing absorption measurement. [ABSTRACT FROM AUTHOR]