Search

A hydrogeological conceptual model of the source, circulation pathways and temporal variation of a low-enthalpy thermal spring in a fractured limestone setting is derived from a multidisciplinary approach. St. Gorman's Well is a thermal spring in east-central Ireland with a complex and variable temperature profile (maximum of 21.8 °C). Geophysical data from a three-dimensional(3D)audio-magnetotelluric(AMT) survey are combined with time-lapse hydrogeological data and information from a previously published hydrochemical analysis to investigate the operation of this intriguing hydrothermal system. Hydrochemical analysis and time-lapse measurements suggest that the thermal waters flow within the fractured limestones of the Carboniferous Dublin Basin at all times but display variability in discharge and temperature. The 3D electrical resistivity model of the subsurface revealed two prominent structures: (1) a NW-aligned faulted contact between two limestone lithologies; and (2) a dissolutionally enhanced, N-aligned, fault of probable Cenozoic age. The intersection of these two structures, which has allowed for karstification of the limestone bedrock, has created conduits facilitating the operation of relatively deep hydrothermal circulation (likely estimated depths between 240 and 1,000 m) within the limestone succession of the Dublin Basin. The results of this study support a hypothesis that the maximum temperature and simultaneous increased discharge observed at St. Gorman's Well each winter is the result of rapid infiltration, heating and recirculation of meteoric waters within a structurally controlled hydrothermal circulation system.The online version contains supplementary material available at 10.1007/s10040-021-02393-1.Un modèle conceptuel hydrogéologique de la source, des voies de circulation et de la variation temporelle d’une source thermale à faible enthalpie dans un contexte de calcaire fracturé est dérivé d’une approche multidisciplinaire. St. Gorman’s Well est une source thermale du centre-est de l’Irlande avec un profil de température complexe et variable (maximum de 21.8 °C). Les données géophysiques d’un levé audio-magnétotellurique (AMT) en trois dimensions (3D) sont combinées avec des données hydrogéologiques à intervalles de temps et des informations provenant d’une analyse hydrochimique publiée précédemment pour étudier le fonctionnement de cet intrigant système hydrothermal. L’analyse hydrochimique et les mesures à différentes périodes suggèrent que les eaux thermales s’écoulent à tout moment dans les calcaires fracturés du bassin carbonifère de Dublin, mais présentent une variabilité de débit et de température. Le modèle de résistivité électrique 3D du sous-sol a révélé deux structures importantes: (1) un contact faillé orienté NW entre deux lithologies calcaires; et (2) une faille alignée au Nord, améliorée par dissolution, d’âge cénozoïque probable. L’intersection de ces deux structures, qui a permis la karstification du socle calcaire, a créé des conduits facilitant le fonctionnement d’une circulation hydrothermale relativement profonde (profondeurs estimées vraisemblablement entre 240 et 1,000 m) au sein de la succession calcaire du bassin de Dublin. Les résultats de cette étude appuient l’hypothèse selon laquelle la température maximale et l’augmentation simultanée du débit observés à St. Gorman’s Well chaque hiver sont le résultat d’une infiltration, d’un réchauffement et d’une recirculation rapides des eaux météoriques dans un système de circulation hydrothermale structurellement contrôlé.Se deriva un modelo conceptual hidrogeológico de la fuente, las vías de circulación y la variación temporal de un manantial termal de baja entalpía en un entorno de caliza fracturada a partir de un enfoque multidisciplinar. Gorman’s Well es un manantial termal en el centro-este de Irlanda con un perfil de temperatura complejo y variable (máximo de 21.8 °C). Los datos geofísicos de un estudio audio-magnetotelúrico (AMT) tridimensional (3D) se combinan con los datos hidrogeológicos de un lapso de tiempo y la información de un análisis hidroquímico previamente publicado para investigar el funcionamiento de este intrigante sistema hidrotermal. El análisis hidroquímico y las mediciones a intervalos de tiempo sugieren que las aguas termales fluyen dentro de las calizas fracturadas de la cuenca carbonífera de Dublín en todo momento, pero muestran variabilidad en la descarga y la temperatura. El modelo de resistividad eléctrica tridimensional del subsuelo reveló dos estructuras prominentes: (1) un contacto de falla alineado al NW entre dos litologías calcáreas; y (2) una falla de disolución incrementada, alineada al N, de probable edad cenozoica. La intersección de estas dos estructuras, que ha permitido la karstificación del lecho rocoso calcáreo, ha creado conductos que facilitan el funcionamiento de una circulación hidrotermal relativamente profunda (probablemente a profundidades estimadas entre 240 y 1,000 m) dentro de la sucesión calcárea de la cuenca de Dublín. Los resultados de este estudio apoyan la hipótesis de que la temperatura máxima y el aumento simultáneo de la descarga observados en St. Gorman’s Well cada invierno son el resultado de una rápida infiltración, calentamiento y recirculación de aguas meteóricas dentro de un sistema de circulación hidrotermal estructuralmente controlado.通过多学科方法, 建立了裂缝型石灰岩环境中低焓温泉的来源、循环路径和时间变化的水文地质概念模型。圣戈尔曼井是爱尔兰中东部的温泉, 温度分布复杂多变 (最高21.8 °C)。将三维 (3D) 音频-大地电磁 (AMT) 调查的地球物理数据与延时水文地质数据和先前发布的水化学分析信息相结合, 调查了有趣的热液系统运行情况。水化学分析和延时测量表明, 热水一直在石炭系都柏林盆地的裂缝型石灰岩内流动, 但流量和温度有变异性。地下的 3D 电阻率模型揭示了两个突出的结构:(1) 两个石灰岩岩性之间的 NW 向断层接触; 和 (2) 可能新生代的溶蚀增强的和N向的断层。两个结构的交叉点使石灰岩基岩发生岩溶作用, 形成了通道, 促进了都柏林盆地石灰岩序列内相对较深的热液循环 (估计深度可能在 240 至 1,000 m 之间)作用。通过这项研究发现每年冬天在圣戈尔曼井观察到的最高温度和同时增加的排泄量是结构控制的热液循环系统中大气水快速入渗、加热和再循环的结果。.Um modelo hidrogeológico conceitual da fonte, vias de circulação e variação temporal de uma fonte termal de baixa entalpia em um ambiente de calcário fraturado é derivado de uma abordagem multidisciplinar. O poço de St. Gorman é uma fonte termal no centro-leste da Irlanda com um perfil de temperatura complexo e variável (máximo de 21.8°C). Os dados geofísicos de uma pesquisa áudio-magnetotelúrica (AMT) tridimensional (3D) são combinados com dados hidrogeológicos em intervalos de tempo e informações de uma análise hidroquimica publicada anteriormente, para investigar a operação deste intrigante sistema hidrotérmico. A análise hidroquimica e as medições em intervalos de tempo sugerem que as águas termais fluem de dentro dos calcários fraturados da Bacia Carbonifera de Dublin o tempo todo, mas exibem variabilidade na descarga e na temperatura. O modelo de resistividade elétrica 3D da subsuperfície revelou duas estruturas proeminentes: (1) um contato defeituoso alinhado a NO entre duas litologias de calcário; e (2) uma falha dissolucionalmente aumentada, alinhada a N, de provável idade Cenozóica. A intersecção dessas duas estruturas, que permitiu a carstificação da rocha calcária, criou condutos que facilitam a operação de circulação hidrotérmica relativamente profunda (profundidade estimada entre 240 e 1,000 m) dentro da sucessão de calcário da Bacia Dublin. Os resultados desse estudo suportam a hipótese de que a temperatura máxima e o aumento simultâneo da descarga observada no poço de St. Gorman a cada inverno é o resultado da rápida infiltração, aquecimento e recirculação de águas meteóricas dentro de um sistema de circulação hidrotérmica estruturalmente controlado.

Iron gall Inks corrosion causes paper degradation (browning, embrittlement) and treatments were developed to tackle this issue. They often include resizing with gelatin to reinforce the paper and its cellulosic fibers (of diameter approx. 10 µm). This work aimed at measuring the distribution of ink components at the scale of individual paper fibers so as to give a better understanding of the impact of gelatin (re-)sizing on iron gall ink corrosion. For this purpose, scanning transmission X-ray microscopy (STXM) was used at the Canadian light source synchrotron (CLS, Saskatoon). This technique combines nano-scale mapping (resolution of 30 nm) and near edge X-ray absorption fine structure (NEXAFS) analysis. Fe L-edge measurements enabled to map iron distribution and to locate iron(II) and iron(III) rich areas. N K-edge measurement made it possible to map gelatin distribution. C K-edge measurements allowed mapping and discrimination of cellulose, gallic acid, iron gall ink precipitate and gelatin. Three fibers were studied: an inked fiber with no size, a sized fiber that was afterwards inked and an inked fiber sprayed with gelatin. Analysis of gelatin and ink ingredients distribution indicated a lower amount of iron inside the treated cellulosic fiber, which may explain the beneficial effect of gelatin on iron gall ink corrosion.

Agriculture activities have increased the concentration of pesticides and metals in the environment. The excessive use of pesticides can generate an environmental impact and contribute to the development of human diseases. This study aimed to determine the presence of pesticides and metals in water samples collected in the Brazilian rural area in two different periods (before and after pesticide application) and to evaluate the alternative bioassays Lactuca sativa, Allium cepa, and Caenorhabditis elegans to monitoring toxicity in human drinking water samples. Eight sites in the rural area were selected and water samples were collected in two different periods of the year (before and after pesticide application). The presence of the pesticides was determinated by ultra-high performance liquid chromatography–tandem mass spectrometry and metals by inductively coupled plasma mass spectrometry. The potential toxicity of the water samples was performed with three different alternatives in vivo models (L. sativa, A. cepa, and C. elegans). Fifty-seven pesticides were analyzed and, according to the results, the most found ones were clomazone, atrazine, tebuconazole, metconazole, pyrimethanil, and carbofuran-3-hydroxide, which is a metabolic degradation product of insecticide carbofuran. The most detected metals were Cu, Cr, Mg, Fe, and Mn. The assays with L. sativa and A. cepa showed alterations in the period after pesticide application, while C. elegans presented changes in both periods compared to the same collection sites. These results indicate that bioassays, especially C. elegans, could be complementary and useful tools for monitoring the toxicity in drinking water samples.

High per- and polyfluorinated alkyl substance (PFAS) concentrations have been detected in agricultural soils in Southwest Germany. Discharges of PFAS-contaminated paper sludge and compost are suspected to be the cause of the contamination. Perfluorinated carboxylic acids (PFCAs) have been detected also in groundwater, drinking water, and plants in this area. Recently, previously unknown compounds have been identified by high-resolution mass spectrometry (HRMS). Major contaminants were polyfluorinated dialkylated phosphate esters (diPAPs) and N-ethyl perfluorooctane sulfonamide ethanol–based phosphate diester (diSAmPAP). In this study, HRMS screening for PFAS was applied to 14 soil samples from the contaminated area and 14 impregnated paper samples which were from a similar period than the contamination. The paper samples were characterized by diPAPs (from 4:2/6:2 to 12:2/12:2), fluorotelomer mercapto alkyl phosphates (FTMAPs; 6:2/6:2 to 10:2/10:2), and diSAmPAP. In soil samples, diPAPs and their transformation products (TPs) were the major contaminants, but also FTMAPs, diSAmPAP, and their TPs occurred. The distribution patterns of the carbon chain lengths of the precursor PFAS in soil samples were shown to resemble those in paper samples. This supports the hypothesis that paper sludge is a major source of contamination. The presence of major degradation products like PFCAs, FTSAs, or PFOS and their distribution of carbon chain lengths indicate the activity of biotic or abiotic degradation processes and selective leaching processes from the upper soil horizons. Graphical abstract Supplementary Information The online version contains supplementary material available at 10.1007/s00216-021-03463-9.

This paper reflects on what materialised during recovery operations following the earthquake in L'Aquila, Italy, on 6 April 2009. Previous critiques have focused on the actions of the Government of Italy and the Department of Civil Protection (Protezione Civile), with little attention paid to the role of local authorities. This analysis sheds light on how the latter used emergency powers, the command-and-control approach, and top-down planning to manage the disaster context, especially in terms of removal of rubble, implementing safety measures, and allocating temporary accommodation. It discusses how these arrangements constituted the mechanism via which ‘disaster capitalism’ took hold at the local and national level, and how it violated human rights, produced environmental and social impacts, hindered local communities from learning, transforming, and building resilience, and facilitated disaster capitalism and corruption. To make the disaster risk reduction and resilience paradigm more effective, a shift from centralised civil protection to decentralised, inclusive community empowerment systems is needed.

We analyze the stability of a unique coexistence equilibrium point of a system of ordinary differential equations (ODE system) modelling the dynamics of a metapopulation, more specifically, a set of local populations inhabiting discrete habitat patches that are connected to one another through dispersal or migration. We assume that the inter-patch migrations are detailed balanced and that the patches are identical with intra-patch dynamics governed by a mean-field ODE system with a coexistence equilibrium. By making use of an appropriate Lyapunov function coupled with LaSalle’s invariance principle, we are able to show that the coexistence equilibrium point within each patch is locally asymptotically stable if the inter-patch dispersal network is heterogeneous, whereas it is neutrally stable in the case of a homogeneous network. These results provide a mathematical proof confirming the existing numerical simulations and broaden the range of networks for which they are valid.

Nitrogen-fixing bacteria (NFB) can reduce nitrogen at ambient pressure and temperature. In this study, we treated effluent from a paper mill in sequencing batch reactors (SBRs) and monitored the abundance and activity of NFB with a view to producing a sludge that could work as a biofertilizer. Four reactors were inoculated with activated sludge enriched with NFB and fed with a high C/N waste (100:0.5) from a paper mill. Though the reactors were able to reduce the organic load of the wastewater by up to 89%, they did not have any nitrogen-fixing activity and showed a decrease in the putative number of NFB (quantified with qPCR). The most abundant species in the reactors treating high C/N paper mill wastewater was identified by Illumina MiSeq 16S rRNA gene amplicon sequencing as Methyloversatilis sp. (relative abundance of 4.4%). Nitrogen fixation was observed when the C/N ratio was increased by adding sucrose. We suspect that real-world biological nitrogen fixation (BNF) will only occur where there is a C/N ratio ≤100:0.07. Consequently, operators should actively avoid adding or allowing nitrogen in the waste streams if they wish to valorize their sludge and reduce running costs. PRACTITIONER POINTS: Efficient biological wastewater treatment of low nitrogen paper mill effluent was achieved without nutrient supplementation. The sludge was still capable of fixing nitrogen although this process was not observed in the wastewater treatment system. This high C/N wastewater treatment technology could be used with effluents from cassava flour, olive oil, wine and dairy industries.

Cellulose nanopaper (CNP) has been considered as a promising material with great application potential in diverse fields. However, the hydrophilic nature of CNP significantly limits its practical application. In order to improve its water resistance, we demonstrate a facile approach to functionalize CNP by impregnating it with chitosan (CS), followed by in situ polymerization of polypyrrole (PPy). The results indicate that the obtained CNP/CS/PPy shows excellent water resistance with the wet tensile strength of up to 80 MPa, which is more than 10 times higher than that of the pure CNP. Intriguingly, new features (e.g., electrical conductivity, antibacterial activity, and so forth) are achieved at the same time. The functionalized CNP/CS/PPy shows a high conductivity of 6.5 S cm-1, which can be used for electromagnetic interference shielding applications with a high shielding performance of around 18 dB. In addition, the CNP/CS/PPy exhibits good antibacterial activity toward Staphylococcus aureus and Escherichia coli, with the bacterial reductions of 99.28 and 95.59%, respectively. Thus, this work provides a simple and versatile approach to functionalize CNP for achieving multifunctional properties.

The potential of alkaline cellulo-xylanolytic enzymes from non-pathogenic Bacillus subtilis strain was tested for deinking of photocopier waste paper. Cellulase and xylanase play a crucial role in deinking of different types of waste paper. Partial purification of cellulo-xylanolytic enzymes was carried out using ultrafiltration followed by ammonium sulfate precipitation. The ultrafiltered enzyme was used for deinking the photocopier waste paper along with chemical deinking. An enzyme dose of 0.6 IU/g and reaction time of 60 min for ultrafiltered cellulo-xylanolytic enzyme significantly increased deinking efficiency, tear index (9.52%) and folding endurance (5±2%) as compared to chemical deinking. There was improvement in strength properties such as tear index and double-fold along with freeness of pulp (18%). There was slight decrease in tensile index (0.6%) and burst index (16%) while ISO brightness remained unaffected. Enzymatic deinking (74.3%) by ultrafiltered cellulo-xylanolytic from Bacillus subtilis was found significant over conventional chemical deinking.

Isothermal amplification strategies capable of rapid, inexpensive, and accurate nucleic acid detection provide new options for large-scale pathogen detection, disease diagnosis, and genotyping. Here we report a highly sensitive multicomponent XNA-based nucleic acid detection platform that combines analyte preamplification with X10-23-mediated catalysis to detect the viral pathogen responsible for COVID-19. The platform, termed RNA-Encoded Viral Nucleic Acid Analyte Reporter (REVEALR), functions with a detection limit of ≤20 aM (∼10 copies/μL) using conventional fluorescence and paper-based lateral flow readout modalities. With a total assay time of 1 h, REVEALR provides a convenient nucleic acid alternative to equivalent CRISPR-based approaches, which have become popular methods for SARS-CoV-2 detection. The assay shows no cross-reactivity for other in vitro transcribed respiratory viral RNAs and functions with perfect accuracy against COVID-19 patient-derived clinical samples.

In this study, the effects of the lacquer applied to the printing materials which were printed by electrophotographic printing method on printing quality were investigated. In practice, printing materials with the same weight and different optical properties were used and the study was carried out in three stages. The optical and physical properties of the printing materials used in the first part were determined, in the second part, the printing of these materials by electrophotographic printing method and printability tests were performed. In the third chapter, matte and glossy lacquers were applied to these printed materials and printability tests were repeated. As a result of the study, it was observed that the application of gloss and matte lacquer caused a decrease in the printing density values and also the application of matte lacquer caused a decrease in the gloss values.

Novel building materials were manufactured and analyzed for 226Ra, 232Th and 40K using an HPGe gamma-ray spectrometer. The results show that the highest value of 40K was 4530 Bq per kg which was measured in a sample containing fly ashes from olive stones. The highest values of 226Ra and 232Th activities were 181 and 185 Bq per kg, which were measured in a sample with fly ashes from the co-combustion of coal and coke, respectively. On the other hand, the lowest values of 40K, 226Ra and 232Th activities were obtained for samples incorporating mussel shells. The radiological health hazard parameters, such as radium equivalent activity (Raeq), activity concentration index (I), absorbed and effective dose rates, associated with these radionuclides were evaluated. These values are within the EU recommended limits in building materials, except for samples of concrete containing fly ashes from olive stones, coal and coke. This study has contributed to the inclusion of industrial wastes that have not been collected previously in the Naturally Occurring Radioactive Material (NORM) databases on radioactivity of building materials.

This study aims to investigate the effects of melamine exposure from the weaning period (21st postnatal days in rats) on liver tissue. Female Wistar albino rats (n = 18) were divided into three groups. About 0.1-ml saline was applied to the control group by gavage for 21 days from the postnatal 21st day. The second group was taken 50-mg/kg melamine (in 0.1-ml saline) and the third group was taken 75-mg/kg melamine (in 0.1-ml saline) p.o. On the postnatal 45th day, all rats were sacrificed under anesthesia. Then, liver tissues were cut into three parts and two of them placed in neutral formalin for histopathological and flow cytometric analysis, and one of them placed in 2.5% glutaraldehyde. Histopathological analysis was performed with hematoxylin & eosin, Masson trichrome, periodic acid Schiff stained sections, and also with transmission electron microscopy. Apoptosis (Annexin V positivity) was analyzed by flow cytometry. According to histopathological analysis, hepatocyte damage, sinusoidal dilatation, and inflammatory cell infiltration significantly increased in both melamine groups compared with the control group. Apoptosis significantly increased in the 50 and 75-mg melamine groups compared with the control group. In the results of transmission electron microscopy analysis, there was abnormal chromatin distribution in the hepatocyte nuclei, loss in the cristae of the mitochondria, and organelle loss in large areas in the cytoplasm in both melamine exposure groups. As result, melamine exposure from the weaning period causes liver damage with increasing doses.

Graphical abstract Enzyme-linked immunosorbent assay (ELISA) is widely used for the detection of disease biomarkers. However, it utilizes time-consuming procedures and expensive instruments, making it infeasible for point-of-care (POC) analysis especially in resource-limited settings. In this work, a multicolorimetric ELISA biosensor integrated on a paper/polymer hybrid microfluidic device was developed for rapid visual detection of disease biomarkers at point of care, without using costly equipment. This multicolormetric ELISA platform was built on multiple distinct color variants resulted from the catalytic oxidation of 3,3′,5,5′-tetramethylbenzidine (TMB) and the etching of gold nanorods (AuNRs). The vivid color changes could be easily distinguished by the naked eye, and their red mean values allowed quantitative biomarker detection, without using any sophisticated instruments. When this multicolorimetric ELISA was integrated on a paper/polymer hybrid analytical device, it not only provided integrated processing and high portability but also enabled fast assays in about 50 min due to the unique advantages of paper/polymer hybrid devices. The limit of detection of 9.1 ng/μL of the hepatitis C virus core antigen, a biomarker for hepatitis C, was achieved using this multicolorimetric ELISA platform. This multicolor ELISA analytical device provides a new versatile, user-friendly, affordable, and portable immunosensing platform with high potential for on-site detections of various viruses, proteins, and biomarkers for low-resource settings such as at home, public venues, rural areas, and developing nations. Supplementary Information The online version contains supplementary material available at 10.1007/s00216-021-03359-8.

Novel ways to track and verify items of a high value or security is an ever-present need. Taggants made from deoxyribonucleic acid (DNA) have several advantageous properties, such as high information density and robust synthesis; however, existing methods require laboratory techniques to verify, limiting applications. Here, we leverage DNA nanotechnology to create DNA taggants that can be validated in the field in seconds to minutes with a simple equipment. The system is driven by toehold-mediated strand-displacement reactions where matching oligonucleotide sequences drive the generation of a fluorescent signal through the potential energy of base pairing. By pooling different "input" oligonucleotide sequences in a taggant and spatially separating "reporter" oligonucleotide sequences on a paper ticket, unique, sequence-driven patterns emerge for different taggant formulations. Algorithmically generated oligonucleotide sequences show no crosstalk and ink-embedded taggants maintain activity for at least 99 days at 60 °C (equivalent to nearly 2 years at room temperature). The resulting fluorescent signals can be analyzed by the eye or a smartphone when paired with a UV flashlight and filtered glasses.

On-site detection of multiple small-molecule analytes in complex sample matrixes would be highly valuable for diverse biosensing applications. Paper electrochemical devices (PEDs) offer an especially appealing sensing platform for such applications due to their low cost, portability, and ease of use. Using oligonucleotide-based aptamers as biorecognition elements, we here for the first time have developed a simple, inexpensive procedure for the fabrication of aptamer-modified multiplex PEDs (mPEDs), which can robustly and specifically detect multiple small molecules in complex samples. These devices are prepared via an ambient vacuum filtration technique using carbon and metal nanomaterials that yields precisely patterned sensing architecture featuring a silver pseudo-reference electrode, a gold counter electrode, and three gold working electrodes. The devices are user-friendly, and the fabrication procedure is highly reproducible. Each working electrode can be readily modified with different aptamers for sensitive and accurate detection of multiple small-molecule analytes in a single sample within seconds. We further demonstrate that the addition of a PDMS chamber allows us to achieve detection in microliter volumes of biological samples. We believe this approach should be highly generalizable, and given the rapid development of small-molecule aptamers, we envision that facile on-site multi-analyte detection of diverse targets in a drop of sample should be readily achievable in the near future.

Providing aid in times of increasing humanitarian need, limited budgets, and mounting security risks is challenging. This paper explores in what organisational circumstances evaluators judge, positively and negatively, the performance of international non-governmental organisations (INGOs) in response to disasters triggered by natural hazards. It assesses whether and how, as perceived by expert evaluators, CARE and Oxfam successfully met multiple institutional requirements concerning beneficiary needs and organisational demands. It utilises the Competing Values Framework to analyse evaluator statements about project performance and organisational control and flexibility issues, using seven CARE and four Oxfam evaluation reports from 2005-11. The reports are compared using fuzzy-set Qualitative Comparative Analysis. The resulting configurations show that positive evaluations of an INGO's internal and external flexibility relate to satisfying beneficiary needs and organisational demands, whereas negative evaluations of external flexibility pertain to not meeting beneficiary needs and negative statements about internal control concerning not fulfilling organisational demands.

Due to their unique properties, paper-based biosensors have attracted attention as inexpensive devices for on-site analysis. To achieve fast and sensitive detection of analytes, immobilization of enzymes with high apparent activities on paper is highly desirable; however, this is challenging. Herein, we report an improved approach to attach a malathion degrading enzyme, PoOPHM9, on paper via an interlocking network of Pluronic F127 (PF127)–poly(acrylic acid)–enzyme conjugates. The addition of PF127 improved retention of enzymatic activity as the apparent kinetic constant Vmax of the immobilized enzyme increased two-fold compared with the paper prepared without PF127. The PF127–poly(acrylic acid)–PoOPHM9 papers provided rapid colorimetric detection of malathion at 0.1–50 mM. The detection was completed within 5 min using a smartphone and image analysis software. As a proof-of-concept, malathion-contaminated water, plant, and apple samples were analyzed with the papers successfully. This material is promising for on-site rapid analysis of malathion-contaminated samples.

The objective of this study was to check the potential of crude xylano-pectinolytic enzymes in bleaching of rice straw pulp, in order to reduce the toxic waste load for managing the environmental pollution. The xylano-pectinolytic enzymatic bleaching step for delignification was found to be most effective at pulp consistency 1:10 g/ml, xylanase:pectinase dose of 9:4 IU/ml, pH 8.5 and treatment time 180 min at temperature of 55 °C, and resulted in lowering of kappa number of the rice straw pulp by 15.29%. In subsequent bleaching stages, this enzymatic pre-bleaching treatment also resulted in 30% reduction of active chlorine dioxide dose without any loss of optical properties. Significant improvement in various physical properties of the enzymes treated pulp, tear index (15.43%), breaking length (11.11%), double fold number (25.92%), burst index (9.88%) and viscosity (13.63%), and Gurley porosity (39.86%) was also noticed. This approach resulted in reduction of BOD and COD values by 21.07% and 26.57%, respectively. This is the first study on the use of crude xylano-pectinolytic enzymes for bio-bleaching of rice straw pulp.

A newly developed research topic, fabricated paper-based microfluidic sensors, was discussed in the field of low-cost environmental detection. Distinguished with the traditional dipstick or lateral-flow setups, these paper-based microfluidic sensors can serve as a tool for onsite quantitative and semi-quantitative measurements, without risks to cause environmental pollution. They have attracted increasing interest since the first easy-fabricated paper-based setup reported by Whitesides group in 2007. Most of the publications utilized paper-based sensors in clinical detection. In recent years, some groups started to use these sensors in environmental measurement, leading to precise, easy operation, low-cost, and eco-friendly methods for onsite detection. In this review, paper-based microfluidic sensors were briefly introduced, followed by literatures review and discussion for future perspectives.

Air Potato Yam is widely used in the treatment of many conditions such as cancer, inflammation, and goiter. Diosbulbin B (DIOB) is the primary active component of Air Potato Yam, and it exhibits anti-tumor and anti-inflammatory properties. The main purpose of this study was to determine the mechanism by which DIOB induces lung toxicity, using metabonomics and molecular biology techniques. The results showed that the lung toxicity induced by DIOB may occur because of a DIOB-induced increase in the plasma levels of long-chain free fatty acids and endogenous metabolites related to inflammation. In addition, treatment with DIOB increases the expression of the cyp3a13 enzyme, which leads to enhanced toxicity in a dose-dependent manner. The molecular mechanism underlying toxicity in mouse lung cells is the DIOB-mediated inhibition of fatty acid β-oxidation, partial glycolysis, and the TCA cycle, but DIOB treatment can also compensate for the low Adenosine triphosphate (ATP) supply levels by improving the efficiency of the last step of the glycolysis reaction and by increasing the rate of anaerobic glycolysis. Using metabonomics and other methods, we identified the toxic effects of DIOB on the lung and clarified the underlying molecular mechanism.

Flexible paper-based sensors may be applied in numerous fields, but this requires addressing their limitations related to poor thermal and water resistance, which results in low service life. Herein, we report a paper-based composite sensor composed of carboxylic carbon nanotubes (CCNTs) and poly-m-phenyleneisophthalamide (PMIA), fabricated by a facile papermaking process. The CCNT/PMIA composite sensor exhibits an ability to detect pressures generated by various human movements, attributed to the sensor's conductive network and the characteristic "mud-brick" microstructure. The sensor exhibits the capability to monitor human motions, such as bending of finger joints and elbow joints, speaking, blinking, and smiling, as well as temperature variations in the range of 30-90 °C. Such a capability to sensitively detect pressure can be realized at different applied frequencies, gradient sagittas, and multiple twists with a short response time (104 ms) even after being soaked in water, acid, and alkali solutions. Moreover, the sensor demonstrates excellent mechanical properties and hence can be folded up to 6000 times without failure, can bear 5 kg of load without breaking, and can be cycled 2000 times without energy loss, providing a great possibility for a long sensing life. Additionally, the composite sensor shows exceptional Joule heating performance, which can reach 242 °C in less than 15 s even when powered by a low input voltage (25 V). From the perspective of industrialization, low-cost and large-scale roll-to-roll production of the paper-based sensor can be achieved, with a formed length of thousands of meters, showing great potential for future industrial applications as a wearable smart sensor for detecting pressure and temperature, with the capability of electric heating.

The plasmonic properties of gold nanoparticles (AuNPs) are a promising tool to develop sensing alternatives to traditional, enzyme-catalyzed reactions. The need for sensing alternatives, especially in underdeveloped areas of the world, has given rise to the application of nonenzymatic sensing approaches paired with cellulosic substrates to biochemical analysis. Herein, we present three individual, low-step, wet-chemistry, colorimetric assays for three target biomarkers, namely, glucose, uric acid, and free cholesterol, relevant in diabetes control and their translation into paper-based assays and microfluidic platforms for multiplexed analysis. For glucose determination, an in situ AuNPs synthesis approach was applied into the developed μPAD, giving semiquantitative measures in the physiologically relevant range. For uric acid and cholesterol determination, modified AuNPs were used to functionalize paper with a gold-on-paper approach with the optical properties changing based on different aggregation degrees and hydrophobic properties of particles dependent on analyte concentration. These paper-based assays show sensitivity ranges and limits of detection compatible for target analyte level determination and detection limits comparable to those of similar enzymatic, colorimetric systems, relying only on plasmonic transduction without the need for enzymatic activity or other chromogenic substrates. The resulting paper-based assays were integrated into a single 3D, multiplex paper-based device using paper microfluidics, showing the capability for performing different colorimetric assays with distinct requirements in terms of sample flow and sample uptake in test zones using a combination of both horizontal and vertical flows inside the same device. The presented device allows for multiparametric, colorimetric measures of different metabolite levels from a single complex sample matrix drop using digital color analysis, showing the potential for development of low-cost, low-complexity tools for diagnostics toward the point-of-care.

Funder: John Simon Guggenheim Memorial Foundation; doi: https://doi.org/10.13039/100005851, Funder: Einstein Visiting Fellow Program, The Rayleigh–Bénard system with stress-free boundary conditions is shown to have a global attractor in each affine space where velocity has fixed spatial average. The physical problem is shown to be equivalent to one with periodic boundary conditions and certain symmetries. This enables a Gronwall estimate on enstrophy. That estimate is then used to bound the L 2 norm of the temperature gradient on the global attractor, which, in turn, is used to find a bounding region for the attractor in the enstrophy–palinstrophy plane. All final bounds are algebraic in the viscosity and thermal diffusivity, a significant improvement over previously established estimates. The sharpness of the bounds are tested with numerical simulations.

In the tourism industry, the sales of local specialties is an important part, and the package design and integrity of the specialties are very important. This paper first introduced the support vector machine (SVM) algorithm that was used for detecting defects on the surface of paper packages. Then, the design of red wind packages was briefly described, and the simulation experiment was carried out on SVM algorithm using red wine packages with different degrees of surface defects. Proper parameters were tested using the k-fold cross-validation method. The results demonstrated that the properties of paper improved the value of packages and the SVM algorithm had better accuracy than artificial recognition in recognizing different degrees of defects on the surface of packages. In conclusion, this paper describes the application of paper in packages and provides an effective method for the defection of defects on the surface of packages. This study provides an effective references to the improvement of package values and the enhancement of package integrity.

Lab-on-paper, or microfluidic paper-based analytical devices (μPADs), use paper as a substrate material, and are patterned with a system of microchannels, reaction zones and sensing elements to perform analysis and detection. The sample transfer in such devices is performed by capillary action. As a result, external driving forces are not required, and hence the size and cost of the device are significantly reduced. Lab-on-paper devices have thus attracted significant attention for point-of-care medical diagnostic purposes in recent years, particularly in less-developed regions of the world lacking medical resources and infrastructures. This review discusses the major advances in lab-on-paper technology for blood analysis and diagnosis in the past five years. The review focuses particularly on the many clinical applications of lab-on-paper devices, including diabetes diagnosis, acute myocardial infarction (AMI) detection, kidney function diagnosis, liver function diagnosis, cholesterol and triglyceride (TG) analysis, sickle-cell disease (SCD) and phenylketonuria (PKU) analysis, virus analysis, C-reactive protein (CRP) analysis, blood ion analysis, cancer factor analysis, and drug analysis. The review commences by introducing the basic transmission principles, fabrication methods, structural characteristics, detection techniques, and sample pretreatment process of modern lab-on-paper devices. A comprehensive review of the most recent applications of lab-on-paper devices to the diagnosis of common human diseases using blood samples is then presented. The review concludes with a brief summary of the main challenges and opportunities facing the lab-on-paper technology field in the coming years.

Detecting vascular endothelial growth factor C (VEGF-C), a kind of tumor biomarker, is of significant clinical importance in evaluating the prognosis of patients with cancer. However, laboratory analyses are usually not suitable for point-of-care testing because they are expensive and time consuming. In response to these challenges, we fabricated an origami paper-based microfluidic electrochemical device. To improve the specificity of VEGF-C detection, nanocomposites, synthesized by new methylene blue (NMB), amino-functional single-walled carbon nanotubes (NH2-SWCNTs), and gold nanoparticles (AuNPs), were used to modify the surface of working electrodes. Results of electrochemical detection showed that the immunosensor had excellent linearity, ranging from 0.01 to 100 ng mL−1 (R2 = 0.988), and the limit of detection was 10 pg mL−1. To confirm the high specificity of the device under real-world conditions, we evaluated the device using clinical serum samples from our hospital. The results demonstrated that the device had an excellent performance and could provide a platform for real-time detection of cancers., Sun, Wang et al. report an origami paper-based immunosensor for the electrochemical detection of the VEGF-C biomarker in blood serum. The immunosensor is made by modifying the surface of working electrodes with new methylene blue, amino-functional single-walled carbon nanotubes, and gold nanoparticles and demonstrates excellent performance with a limit of detection in the range of picograms per milliliter.

Leukocyte esterase (LE) is a useful marker that can be used in establishing a diagnosis of urinary tract infections (UTIs). The development of a UTI diagnostic method with quantitative determinations of biomarkers across all age groups is becoming more important. In this report, microfluidic resistance sensors based on silver ink (Ag ink) and silver ink mixed with ZnO nanoparticles (Ag-ZnO ink) were synthesized and coated on cellulose paper, namely LE-Ag-μPADs and LE-Ag-ZnO-μPADs, respectively, for the sensitive detection of LE. The microfluidic design increases the precision of data and further allows for quantitative determination and early detection of LE in human urine. The quantification of LE relies on the change in the resistance readout coating with Ag ink as well as Ag-ZnO ink in the detection zone. A mixture of 3-(N-tosyl-l-alaninyloxy)-5-phenylpyrrole (PE) and 1-diazo-2-naphthol-4-sulfonic acid (DAS) was deposited in the sample zone to selectively recognize LE, and the resulting nonconductive products, i.e., azo compounds, further reacted with the Ag ink and Ag-ZnO ink to increase resistance. The quantitative detectable LE concentrations between 2 to 32 (×5.2 U mL-1), i.e. ≈12 to 108 μg L-1, cover the commercial dipstick range of trace, +1 and +2. The minimum detectable concentration of LE in urine was 1 (×5.2 U mL-1). The lower concentrations of LE detectable by LE-Ag-μPADs (1-8 × 5.2 U mL-1) are below the value achieved with the ELISA LE kit. Urine samples from inpatients with indwelling urinary catheters were used, and the LE levels measured by the present device were highly correlated with those determined by a commercial urine analyser.

The dating of organic findings is a fundamental task for many scientific fields. Radiocarbon dating is currently the most commonly used method. For wood, dendrochronology is another state‐of‐the‐art method. Both methods suffer from systematic restrictions, leading to samples that have not yet been able to be dated. Molecular changes over time are reported for many materials under different preservation conditions. Many of them are intrinsically monotonous. These monotonous molecular decay (MD) patterns can be understood as clocks that start at the time when a given molecule was formed. Factors that influence these clocks include input material composition and preservation conditions. Different wood species, degrees of pyrolysis, and pretreatments lead to different prediction models. Preservation conditions might change the speed of a given clock and lead to different prediction models. Currently published models for predicting the age of wood, paper, and parchment depend on infrared spectroscopy. In contrast to radiocarbon dating, dating via MD does not comprise a single methodology. Some clocks may deliver less precise results than the others. Ultimately, developing a completely different, new dating strategy‐such as MD dating–will help to bring to light a treasure trove of information hidden in the darkness of organic findings., This review focuses on molecular changes over time. Having been discussed since the 1960s, the variety of molecular clocks includes the change in amino acids in the primary structure of a protein over time. Molecular decay (MD) has a mainly monotonous function, a prerequisite to serving as such a clock. In addition, such clocks need a defined starting point and a defined decay function. In contrast to the decay of alpha and beta emitters, MD is influenced by several environmental factors indicated by preservation conditions. The MD method has the potential to be used for different organic materials and different scientific fields.

Infectious diseases cause millions of deaths annually in the developing world. Recently, microfluidic paper-based analytical devices (μPADs) have been developed to diagnose such diseases, as these tests are low cost, biocompatible, and simple to fabricate. However, current μPADs are difficult to use in resource-limited areas due to their reliance on external instrumentation to measure and analyze the test results. In this work, we propose an electricity and external instrumentation-free μPAD sensor based on the colorimetric enzyme-linked immunosorbent assay (ELISA) for the diagnosis of infectious disease (3D-tPADs). Designed based on the principle of origami, the proposed μPAD enables the sequential steps of the colorimetric ELISA test to be completed in just ∼10 min. In addition, in order to obtain an accurate ELISA result without using any instrument, we have integrated an electricity-free "timer" within the μPAD that can be controlled by the buffer viscosity and fluid path volume to indicate the appropriate times for washing and color development steps, which can avoid false positive or false negative results caused by an extended or shortened amount of washing and development times. Due to the low background noise and high positive signal intensity of the μPAD, positive and negative detection results can be distinguished by just the naked eye. Furthermore, the ELISA result can be semi-quantified by comparing the results shown on the μPAD with a color chart diagram with a detection limit of HIV type 1(HIV-1) p24 antigen as low as 0.03 ng mL-1. These results demonstrate the proposed sensor can perform infectious disease diagnosis without external instrumentation or electricity, extending the application of the μPAD test for on-site detection and use in resource-limited settings.

Paper-based microfluidic devices are popular for their ability to automate multistep assays for chemical or biological sensing at a low cost, but the design of paper microfluidic networks has largely relied on experimental trial and error. A few mathematical models of flow through paper microfluidic devices have been developed and have succeeded in explaining experimental flow behavior. However, the reverse engineering problem of designing complex paper networks guided by appropriate mathematical models is largely unsolved. In this article, we demonstrate that a two-dimensional paper network (2DPN) designed to sequentially deliver three fluids to a test zone on the device can be computationally designed and experimentally implemented without experimental trial and error. This was accomplished by three new developments in modeling flow through paper networks: (i) coupling of the Richards equation of flow through porous media to the species transport equation, (ii) modeling flow through assemblies of multiple paper materials (test membrane and wicking pad), and (iii) incorporating limited-volume fluid sources. We demonstrate the application of this model in the optimal design of a paper-based signal-enhanced immunoassay for a malaria protein, PfHRP2. This work lays the foundation for the development of a computational design toolbox to aid in the design of paper microfluidic networks. ©

This paper introduces a novel potential-resolved paper-based biosensor for simultaneous detection of multiple microRNAs (miRNAs) (taking miRNA-155 and miRNA-126 as examples) based on the bipolar electrode (BPE) electrochemiluminescence (ECL) strategy. The proposed multiple-channel paper-based sensing microfluidic platform was prepared by wax-printing technology, screen-printing method, and in situ Au nanoparticles (AuNPs) growth to form hydrophilic areas, hydrophobic boundaries, waterproof electronic bridge, driving electrode regions, and parallel bipolar electrode regions. CdTe quantum dots (QDs)-H2 and Au@g-C3N4 nanosheets (NSs)-DNA1 were used as dual electrochemiluminescence signal probes, and carboxylated Fe3O4 magnetic nanoparticles existed as carriers. CdTe QDs-H2/S2O82- and Au@g-C3N4 NSs-DNA1/S2O82- could exhibit two strong and stable ECL emissions at a drive voltage of 9 and 12 V, respectively, which can be used as effective potential-resolved signal tags. In addition, the proposed three-dimensional (3D) DNA nanomachine model and the target miRNA cycle strategy were used to achieve double amplification of electrochemiluminescence intensity. More importantly, the combination of the bipolar electrode system and the potential-resolved multitarget electrochemiluminescence method can greatly reduce the spatial interference between substances. The prepared ECL biosensor showed a favorable linear response for the detection of miRNA-155 and miRNA-126 with relatively low detection limits of 5.7 and 4.2 fM, respectively. With excellent sensitivity, the strategy may provide an efficient method for clinical application, especially in detection of trace multiple targets.

Mineralized polymer scaffolds have proven to be effective biomaterials for inducing osteoinductivity in bone tissue engineering. Sequential mineralization is a promising technique for depositing minerals in three-dimensional (3D) scaffolds. Paper, which is made of cellulose fibers, can be used as a tissue scaffold due to its highly porous structure and flexibility, as well as its excellent ability to wick fluids and support the growth of bone cells. In this study, paper-based, mineralized scaffolds were fabricated using sequential mineralization. We conducted experiments with two groups of scaffolds based on different incubation times in the mineralization solutions (30 min and 24 h). Ten cycles of mineralization were performed for each group. We found that the mineral content increased as the cycle number increased and that the 24-h group scaffolds consistently had more mineralization than did the 30-min group scaffolds when measured at the same cycle number. A quantitative reverse transcription-polymerase chain reaction was performed for two osteogenic differentiation markers of the preosteoblasts that were grown on the mineralized paper scaffolds. The gene expression results for bone-specific markers revealed that the mineralized scaffolds were osteoinductive. Subcutaneous implantation of the scaffolds in rats demonstrated favorable biocompatibility, high vascularization, and non-immunogenicity in vivo. The overall results suggest that the sequentially mineralized paper scaffolds are promising materials for use in bone tissue engineering.

Changes in ecosystems after the removal of stress provide a rich source of information for conservation science. We used a long-term regional data set on the performance of white sucker (Catostomus commersonii) collected before and after the closure of a pulp mill to explore recovery in fish. Physiological indicators, including liver enzymes and plasma steroids, showed some compelling changes after the closure of the mill consistent with reduced exposure to pulp mill effluent but did not unequivocally demonstrate recovery. However, persistent signals in these fish may indicate effects of impoundment or discharge of sewage. We also used quantile regression with environmental covariates and bootstrap iteration to determine if systematic variation remained in relative body weight, liver weight, and gonad weight. In fish formerly exposed to pulp mill effluent, we found evidence of improvements (male gonad weight and liver weight of males and females), degradation (gonad weight of females), and no change (body weight). Although the observed patterns may be associated with closure of the mill, some differences were also found at regional locations, suggesting roles of additional stressors and challenging the clear association of change at the Mattagami River exposure site with the closure of the mill. However, fish captured at this location show responses consistent with regional locations, suggesting no residual impacts and highlights the challenges of identifying changes in fish even after large and known interventions. Environ Toxicol Chem 2021;40:162-176. © 2020 SETAC.

Weighing paper-assisted magnetic ionic liquid headspace single-drop microextraction using microwave distillation followed by gas chromatography-mass spectrometry was successfully developed to determine the essential oil components in lavender. The magnetic ionic liquid 1-octyl-3-methylimidazolium tetrachloroferrate was successfully synthesized and used as the optimal extraction solvent. An aliquot of 9 μL of magnetic ionic liquid could be stably suspended on the weighing paper for long time extraction. The increase of the extractant volume resulted in a significantly enhanced in extracting efficiency of the weighing paper-assisted magnetic ionic liquid headspace single-drop microextraction than traditional headspace single-drop microextraction method. In this experiment, the optimal conditions were 1-octyl-3-methylimidazolium tetrachloroferrate as the extraction solvent, extraction time of 12 min, microwave power of 600 W, cyclohexane as back-extractant and sample amount of 30 mg. The developed method was successfully applied to analyze 16 lavender samples from three different harvest years. A total of 39 compounds in lavender were identified and the principal component analysis provided a clear separation between those lavender samples harvested in different years. The results indicated that the proposed weighing paper-assisted magnetic ionic liquid headspace single-drop microextraction is a novel, fast, simple and sensitive microextration technique for the determination of the essential oil components in lavender.

Formaldehyde (FA) exposure has been proven to increase the risk of asthma and cancer. This study aimed to evaluate for 28 days the FA inhalation effects on oxidative stress, inflammation process, genotoxicity, and global DNA methylation in mice as well as to investigate the potential protective effects of melatonin. For that, analyses were performed on lung, liver and kidney tissues, blood, and bone marrow. Bronchoalveolar lavage was used to measure inflammatory parameters. Lipid peroxidation (TBARS), protein carbonyl (PCO), non-protein thiols (NPSH), catalase activity (CAT), comet assay, micronuclei (MN), and global methylation were determined. The exposure to 5-ppm FA resulted in oxidative damage to the lung, presenting a significant increase in TBARS and NO levels and a decrease in NPSH levels, besides an increase in inflammatory cells recruited for bronchoalveolar lavage. Likewise, in the liver tissue, the exposure to 5-ppm FA increased TBARS and PCO levels and decreased NPSH levels. In addition, FA significantly induced DNA damage, evidenced by the increase of % tail moment and MN frequency. The pretreatment of mice exposed to FA applying melatonin improved inflammatory and oxidative damage in lung and liver tissues and attenuated MN formation in bone marrow cells. The pulmonary histological study reinforced the results observed in biochemical parameters, demonstrating the potential beneficial role of melatonin. Therefore, our results demonstrated that FA exposure with repeated doses might induce oxidative damage, inflammatory, and genotoxic effects, and melatonin minimized the toxic effects caused by FA inhalation in mice.

Several different approaches have been developed to model the specific characteristics of karst aquifers, taking account of their inherent complex spatial and temporal heterogeneities. This paper sets out the development of a semidistributed modelling approach for applications in an Irish karst context using urban drainage software. The models have proven to be very useful for different studies, with examples given for the ecohydrology of ephemeral karst lakes, extreme groundwater-flood alleviation, karst network investigation, submarine groundwater discharge, and quantification of different recharge and flow components. The limitations of the approach are also highlighted, in particular not being able to simulate diffuse infiltration and flow paths explicitly across the groundwater catchment. Hence, a more distributed, finite-difference modelling approach using MODFLOW Unstructured Grid (USG) with the newly developed Connected Linear Network (CLN) process is then compared against the semidistributed approach on the same karst catchment. Whilst it has proven difficult to achieve the same levels of model performance in simulating the spring flows in the distributed model compared to the semidistributed model, the ability to interrogate the flow paths at any point on the three-dimensional aquifer is demonstrated, which can give new insights into flows (and potential contaminant transport) through such complex systems. The influence of the proximity of highly transmissive conduits on the flow dynamics through the much-lower transmissive matrix cells in which the network is embedded has been particularly investigated.Plusieurs approches différentes ont été développées pour modéliser les caractéristiques spécifiques des aquifères karstiques, prenant en compte leurs hétérogénéités spatiales et temporelles associées à leur complexité intrinsèque. Cet article présente le développement d’une approche de modélisation semi-distribuée appliquée à un contexte karstique irlandais en utilisant un logiciel de drainage urbain. Ces modèles se sont avérés très utiles pour différentes études, avec des exemples appliqués à l’écohydrologie de lacs karstiques éphémères, l’atténuation de crues extrêmes liées aux eaux souterraines, à l’étude du réseau karstique, à la décharge des sources sous-marines et à la quantification des différentes composantes aussi bien de la recharge que du débit. Les limites de cette approche sont aussi mises en évidence, avec en particulier l’incapacité de simuler l’infiltration diffuse et les voies d’écoulement de manière explicite au sein du bassin d’alimentation d’eaux souterraines. Par conséquent, une approche de modélisation plus distribuée aux différences finies utilisant le logiciel MODFLOW avec une grille non structurée (USG) intégrant le processus récemment développé de réseau linéaire connecté (CLN) est ensuite comparée à l’approche semi-distribuée appliquée au même bassin karstique. Alors qu’il s’est avéré difficile d’atteindre les mêmes niveaux de performance du modèle concernant la simulation du débit à la source à l’aide du modèle distribué en comparaison au modèle semi-distribué, la possibilité d’examiner les voies d’écoulement en tout point de l’aquifère en 3D est démontrée, ce qui peut donner de nouvelles connaissances sur les écoulements (et le transport potentiel de contaminants) au sein de tels systèmes complexes. L’influence de la proximité de conduits hautement transmissifs sur les écoulements dynamiques au travers des cellules de transmissivité plus faible de la matrice au sein de laquelle le réseau est intégré, a été particulièrement étudiée.Se han elaborado varios enfoques diferentes para modelar las características específicas de los acuíferos kársticos, teniendo en cuenta sus complejas y propias heterogeneidades espaciales y temporales. En el presente documento se expone la elaboración de un enfoque de modelización semidistribuido para aplicaciones en un contexto kárstico de Irlanda utilizando programas informáticos de drenaje urbano. Los modelos han demostrado ser muy útiles para diferentes estudios, y se dan ejemplos para la ecohidrología de los lagos kársticos efímeros, la mitigación de las inundaciones extremas de aguas subterráneas, la investigación de redes kársticas, la descarga submarina de aguas subterráneas y la cuantificación de diferentes componentes de la recarga y el flujo. También se ponen de relieve las limitaciones del enfoque, en particular el hecho de no poder simular explícitamente la infiltración difusa y las trayectorias de flujo a través de la cuenca de captación de aguas subterráneas. Por lo tanto, un enfoque de modelización de diferencias finitas distribuidas utilizando la red no estructurada (USG) de MODFLOW con el proceso de la Red Lineal Conectada (CLN) recientemente desarrollado se compara entonces con el enfoque semidistribuido en la misma cuenca kárstica. Si bien se ha demostrado que es difícil lograr los mismos niveles de rendimiento del modelo en la simulación de los flujos de manantiales en el modelo distribuido en comparación con el modelo semidistribuido, se demuestra la capacidad de interrogar las trayectorias de los flujos en cualquier punto del acuífero tridimensional, lo que puede dar nuevos conocimientos sobre los flujos (y el transporte de contaminantes potenciales) a través de sistemas tan complejos. Se ha investigado en particular la influencia de la proximidad de conductos altamente transmisivos en la dinámica de los flujos a través de las células de la matriz transmisiva, mucho más bajas, en las que está incorporada la red.鉴于岩溶含水层内在的复杂时空异质性, 已经开发出几种不同的方法来模拟岩溶含水层的特定性质。本文提出了基于城市排水软件的半分布式模型的开发方法, 并在爱尔兰喀斯特环境中应用。该模型已被证明对不同的研究非常有用, 并举例说明了季节性的喀斯特湖的生态水文学, 极端地下水洪涝减缓, 岩溶网络调查, 海底地下水排泄以及不同补给量和流动量的量化。还强调了该方法的局限性, 特别是不能明确模拟整个地下水盆地的扩散入渗和流动路径。因此, 然后将MODFLOW非结构化网格(USG)和新开发的连接线性网络(CLN)过程耦合的分布式有限差分方法与同一个喀斯特流域的半分布式方法进行了比较。尽管已证明分 布式模型模拟的泉流量难以达到与半分布式模型相比相同水平的模型性能, 但仍展示了在三维含水层上任意点处查询流路的能力, 这可以给出分析该类复杂系统流量(以及潜在的污染物传输)的新方法。特别研究了高传输管流的邻近度对通过嵌入网络的传导率低得多单元的流动动力学的影响。.Diversas abordagens diferentes foram desenvolvidas para modelar as características específicas dos aquíferos cársticos, levando em consideração suas complexas heterogeneidades espaciais e temporais inerentes. Este artigo apresenta o desenvolvimento de uma abordagem de modelagem semidistribuída para aplicações em um contexto cárstico irlandês usando software de drenagem urbana. Os modelos provaram ser muito úteis para diferentes estudos, com exemplos dados para a ecohidrologia de lagos cársticos efêmeros, alívio de inundações subterrâneas extremas, investigação de rede cárstica, descarga de água subterrânea submarina e quantificação de diferentes componentes de recarga e fluxo. As limitações da abordagem também são destacadas, em particular não ser capaz de simular infiltração difusa e caminhos de fluxo explicitamente através da captação de água subterrânea. Portanto, uma abordagem de modelagem de diferenças finitas, mais distribuída, usando MODFLOW Unstructured Grid (USG) com o processo de Rede Linear Conectada (RLC) recém-desenvolvido é então comparada com a abordagem semidistribuída na mesma bacia cárstica. Embora tenha se mostrado difícil alcançar os mesmos níveis de desempenho do modelo na simulação dos fluxos de nascente no modelo distribuído em comparação com o modelo semidistribuído, a capacidade de interrogar os caminhos de fluxo em qualquer ponto do aquífero tridimensional é demonstrada, o que pode dar novas percepções sobre os fluxos (e o transporte potencial de contaminantes) por meio de tais sistemas complexos. A influência da proximidade de condutos altamente transmissivos na dinâmica do fluxo através das células da matriz transmissiva muito inferior nas quais a rede está inserida foi investigada particularmente.

Background: JWH-018 was the first synthetic cannabinoid introduced as a legal high and the first of the new generation of novel psychoactive substances that flooded worldwide drug markets. JWH-018 was marketed as “spice,” “herbal incense,” or “herbal blend,” as a popular and legal (at the time) alternative to cannabis (marijuana). JWH-018 is a potent synthetic cannabinoid with considerable toxicity associated with its use. JWH-018 has qualitatively similar but quantitatively greater pharmacological effects than cannabis, leading to intoxications and even deaths. The mechanisms of action of the drug’s toxicity require research, and thus, the aim of the present study was to investigate the toxicological profile of JWH-018 in human SH-SY5Y neuronal cells. Methods: SH-SY5Y neuronal cells were exposed to increasing concentrations from 5 to 150 μM JWH-018 over 24 h. Cytotoxicity, DNA damage, the apoptotic/necrotic rate, and oxidative stress were assessed following SH-SY5Y exposure. Results: JWH-018 did not produce a significant decrease in SH-SY5Y cell viability, did not alter apoptotic/necrotic rate, and did not cause genotoxicity in SH-SY5Y cells with 24-h exposure. Glutathione reductase and catalase activities were significantly reduced; however, there was no significant change in glutathione peroxidase activity. Also, JWH-018 treatment significantly decreased glutathione concentrations, significantly increased protein carbonylation, and significantly increased malondialdehyde (MDA) concentrations. For significance, all P

There is growing demand for simple to operate, sensitive, on-site quantitative assays to investigate concentrations of drug molecules in pharmaceutical preparations for quality assurance. Here, we report on the development of two colorimetric analysis methods for the study the antibiotic doxycycline hyclate (DOX) and the nasal decongestant oxymetazoline hydrochloride (OXY), in solution as well as in their respective formulations. We compare a UV/vis spectrophotometry method with a color change recorded on a microfluidic paper-based analytical device (μPAD). Detection is based on the pharmaceutical compounds coupling with diazotized 4-aminoacetophenone (DAAP) under alkaline conditions to produce colored azo-dye products. These azo-compounds were monitored by absorbance at 425 nm for DOX and 521 nm for OXY, with linear calibration graphs in the concentration range of 0.5–35 mg L−1 (DOX) and 1.0–40 mg L−1 (OXY) and limits of detection of 0.24 mg L−1 (DOX) and 0.32 mg L−1 (OXY). For the μPAD method, color intensity was measured from photographs and a linear increase was observed at concentrations from above approximately 15 mg L−1 for both compounds and up to 35 mg L−1 for DOX and 40 mg L−1 for OXY. The developed methods were also applied to the formulated pharmaceuticals and no interference was found from the excipient. Thus, the paper-based device provides an inexpensive, simple alternative approach for use outside centralized laboratories with semi-quantitative capability.

Lysergic acid diethylamide (LSD) is a hallucinogen, synthesized from ergot alkaloid, and controlled as a narcotic in Japan. Recently, LSD derivatives have appeared as designer drugs, all over the world. In previous study, we reported identification and analysis of four LSD derivatives in four paper sheet products. In this study, we detected three additional LSD derivatives from three paper sheet products, which were obtained from September 2019 to March 2020 in Japan. We extracted the compounds from paper sheet products with methanol for LC-MS, high-resolution MS and GC-MS analyses. The compounds were identified as 4-cyclopropionyl-N,N-diethyl-7-methyl-4,6,6a,7,8,9-hexahydroindolo[4,3-fg]quinoline-9-carboxamide (1cP-LSD), N-methyl-N-isopropyl-7-methyl-4,6,6a,7,8,9-hexahydroindolo-[4,3-fg]quinoline-9-carboxamide (MIPLA), 4-butyryl-N,N-diethyl-7-methyl-4,6,6a,7,8,9-hexahydroindolo[4,3-fg]quinoline-9-carboxamide (1B-LSD), by GC-MS, LC-MS, LC-Q-TOF-MS and NMR analyses. As well as other N1-acylated LSD derivatives, 1cP-LSD and 1B-LSD were easily deacylated to LSD during GC-MS analysis, we have to be careful to analyze these compounds.

Propofol is a widely used intravenous anesthetic agent in sedation and general anesthesia. To improve the safety and maintain the depth of anesthesia, it is important to develop a rapid, sensitive, and reliable method to monitor the concentration of propofol in blood during anesthesia continuously. Here, we present a novel strategy based on paper spray ionization-mass spectrometry (PSI-MS) to detect propofol. Samples (in 10 μL) were mixed with methanol as protein precipitation solvent and 2,6-dimethylphenol as internal standard. Protein micro-precipitation was achieved with methanol by vortexing and centrifuging for 5 s each, and propofol was extracted to the supernatant. PSI-MS was performed in negative ionization mode, and MS signal lasted for 1 min. The analysis of a single sample was completed within 2 min. The area ratios of propofol to internal standard were calculated for quantification. Limit of detection of 5.5 ng mL−1 and limit of quantification of 18.2 ng mL−1 were achieved for propofol in whole blood. Calibration curve was linear in the range of 0.02–10 μg mL−1. The developed method was used successfully in monitoring the propofol concentration in 3 patients’ whole blood during anesthesia, showing its further application in controlling and feeding-back target concentration infusion.

Application of barrier dispersion coatings on paperboards, which must have proper moisture and grease resistance for food applications, has always been an interesting subject for the packaging industry. In this study, paperboards were coated with a novel dispersion barrier coating prepared through mixing soy protein isolate (SPI) and polyethylene wax (PE-wax). Different characterization methods were used to study the effects of coating and its composition on the physical, mechanical, and barrier characteristics of paperboards. The results indicated that the incorporation of PE-wax into the coating formulation caused significant reduction of the viscosity of coating slurries. It had no effect on the coating weight of the samples but increased the thickness of the coated paperboards as compared with those coated with SPI only. The increase of the wax content led to a reduction of 5-16% in the tensile strength values in comparison with the uncoated paperboards. Barrier characteristics, i.e., water vapor permeability (WVP), surface wettability, and water resistance, improved by adding PE-wax. In addition, it was found that there was a critical level for the addition of PE-wax, 50% of SPI, as no oil migration was detected when the paperboards coated with SPI coatings contained less than 50% PE-wax.

In this study, action of ultrafiltered xylano-pectinolytic enzymes from a bacterial strain has been evaluated for bleaching of rice straw soda-anthraquinone pulp. Maximum bio-bleaching effect and release of non-cellulosic impurities were noticed with xylano:pectinolytic enzymes dose of 6.0:2.1-IU/g pulp, treatment time of 180 min at 10% pulp consistency, pH 8.5, and temperature 55 °C. Microscopic images of bio-bleached rice straw pulp also confirmed the efficacy of ultrafiltered enzymes, as bleaching agent. This bio-bleaching treatment resulted in 15.38% and 32% reduction in kappa number and active chlorine dioxide dose, respectively, along with increase in various physical properties, burst index (12.50%), tear index (19.07%), breaking length (14.30%), double fold number (26.31%), Gurley porosity (45.32%) and viscosity (16.17%). This bio-bleaching approach not only improved the pulp quality but also reduced environmental pollution load by decreasing effluent parameters values of BOD and COD by 23.67% and 27.44%, respectively. This study indicates that use of ultrafiltered xylano-pectinolytic synergism for rice straw pulp bleaching will ultimately help in making the process eco-friendly, along with better quality pulp. This is the first report on use of ultrafiltered xylanase and pectinase, produced from a bacterial isolate, for bleaching of rice straw pulp.

Tuberculosis (TB), one of the deadliest infectious diseases, is caused by Mycobacterium tuberculosis (MTB) and remains a public health problem nowadays. Conventional MTB DNA detection methods require sophisticated infrastructure and well-trained personnel, which leads to increasing complexity and high cost for diagnostics and limits their wide accessibility in low-resource settings. To address these issues, we have developed a low-cost photothermal biosensing method for the quantitative genetic detection of pathogens such as MTB DNA on a paper hybrid device using a thermometer. First, DNA capture probes were simply immobilized on paper through a one-step surface modification process. After DNA sandwich hybridization, oligonucleotide-functionalized gold nanoparticles (AuNPs) were introduced on paper and then catalyzed the oxidation reaction of 3,3',5,5'-tetramethylbenzidine (TMB). The produced oxidized TMB, acting as a strong photothermal agent, was used for the photothermal biosensing of MTB DNA under 808 nm laser irradiation. Under optimal conditions, the on-chip quantitative detection of the target DNA was readily achieved using an inexpensive thermometer as a signal recorder. This method does not require any expensive analytical instrumentation but can achieve higher sensitivity and there are no color interference issues, compared to conventional colorimetric methods. The method was further validated by detecting genomic DNA with high specificity. To the best of our knowledge, this is the first photothermal biosensing strategy for quantitative nucleic acid analysis on microfluidics using a thermometer, which brings fresh inspirations on the development of simple, low-cost, and miniaturized photothermal diagnostic platforms for quantitative detection of a variety of diseases at the point of care.

The pulp bleaching process removes or transforms the chromophore groups in the pulp, so that the final product reaches a desired brightness. However, this chemical treatment inevitably results in yield loss. Therefore, the objective of this work was to quantify the yield loss caused during the bleaching of kraft pulp of Pinus radiata delignified with oxygen. The material was submitted to three distinct ECF sequences (D0(EPO)D1D2, D0(EPO)D1P, and Z/EDP). At the end of each bleaching stage, the pulp brightness and the loss of gravimetric yield of the process were determined, and the generated filtrates were collected. From these filtrates, the pollutant load of the effluent was determined by measuring the content of total dissolved solids, the chemical oxygen demand, the concentration of total organic carbon carbon, and the adsorbable organic halogens. Among the whole sequences, the Z/EDP sequence had the lowest gravimetric yield, the highest pollutant load in the collected filtrate, and lowest potential for adsorbable organic halogens generation. There was good correlation between the loss of yield from the bleaching process and the organic load of the generated effluent; and among the techniques studied, the quantification of total organic carbon was the most appropriate method for the indirect quantification of the yield loss during the bleaching process of the studied material.

Development of selective and sensitive methods for on-site assay of tetracycline (TC) is of great significance for public health and food safety. Herein, a valid ratiometric fluorescence strategy using g-C3N4 nanosheets coupled with Eu3+ is designed for the assay of TC. In this strategy, both Eu3+ and g-C3N4 nanosheets serve as the recognition units of TC. The blue fluorescence of g-C3N4 nanosheets can be quenched by TC via the inner filter effect (IFE); meanwhile, the red fluorescence of Eu3+ can be enhanced by TC through the antenna effect (AE). The synergistic effect of AE and IFE caused by TC makes the developed ratiometric fluorescent sensor display a wide linear range for TC from 0.25 to 80 μM with a detection limit of 6.5 nM and a significant fluorescence color evolution from blue to red. Given its simplicity, free-label, excellent selectivity, high sensitivity, and recognizable color change, point-of-care testing systems, including smartphones and test paper-based assays, are developed for the visual sensing of TC. The integration of smartphones and test paper on a ratiometric fluorescent sensor greatly reduces the detection cost and time, providing a promising method for the qualitative discernment and semi-quantitative assay of TC on-site. Moreover, the potential application of the approach is also verified by detecting TC in milk.

In this study, a microfluidic paper-based analytical device (mu PAD) was integrated with a smartphone app capable of offline (without internet access) image processing and analysis for the rapid colorimetric detection of glucose. A self-inking stamp was used to form hydrophobic channels on a piece of paper-towel due to its superior water absorption efficiency. As demonstrated, the developed sensor was employed for the colorimetric detection of glucose in artificial saliva in the linear scope of 0 - 1 mM with a calculated detection limit of 29.65 mu M. The experimental results show that the quantitative analysis of glucose with the proposed smartphone platform could be completed in less than one minute. The app developed for the smartphone platform is capable of extracting the color-changing area with an embedded image processing tool which could address the problem of color uniformity in the detection zones of mu PAD. The integrated platform has great potential to be used for non-invasive measurements of glucose in body fluids, like tears, sweat and saliva.

Fine particulate matter (PM2.5) in the ambient atmosphere is strongly associated with detrimental health effects. However, these particles from various sources and regions are unlikely equally toxic. While animal studies are impractical for high-throughput toxicity testing, appropriate in vitro models are urgently needed. Co-culture of A549 and THP-1 macrophages grown at air–liquid interface (ALI) or under submerged conditions was exposed to same concentrations of ambient PM2.5 to provide accurate comparisons between culture methods. Following 24-h incubation with PM2.5 collected in Harbin in China, biological endpoints being investigated include cytotoxicity, reactive oxygen species (ROS) levels and pro-inflammatory mediators. The co-culture grown under submerged condition demonstrated a significant increase in ROS levels and all tested pro-inflammatory indicators [interleukin (IL)-1β, IL-6, IL-8 and tumor necrosis factor-α] in mRNA expression and released protein levels. Similar but a declining response trend was observed using the same PM2.5 incubation after grown at ALI. We further observed a significant increase of PM2.5-induced phosphorylation of p38 MAPK and activation of NF-κB p65 in a dose-dependent trend for co-cultures grown under submerged condition. These results provide important implications that culture conditions (ALI versus submerged) can induce different extents of biological responses to ambient PM2.5; the co-culture grown at ALI is less likely to produce false-positive results than submerged culture. Hence, culture conditions should be discussed when comparing in vitro methods used for high-throughput PM2.5 toxicity assessment in future.

Paper-based works of art and documents of cultural importance kept in museums and libraries can show notorious signs of deterioration, including foxing stains, caused by fungal colonization. Some of the main chromophore agents of fungal origin that deteriorate paper and therefore affect paper cultural heritage both aesthetically and structurally are the group of pigments called melanins. Thus, knowledge of the diversity and features of fungal melanins and of the melanization pathways of fungi growing on paper is key to removing these pigments from paper-based works of cultural importance. This review provides an approach about the current knowledge of melanins synthesized by paper-colonizing fungi, their localization in the fungal structures, and their role in the deterioration of paper. This knowledge might contribute to developing new, effective, and sustainable strategies of restoration and conservation of historical documents and works of art based on paper.

Direct ambient ionization techniques have been developed with the aim to reduce the complexity of mass spectrometry analysis by minimizing sample preparation and chromatographic separation. In this context, paper spray-MS (PS-MS) is an innovative approach that provides faster and cheaper analysis of biofluids by the addition of the sample directly to a paper. In forensic toxicology, the analytical workflow for the detection and quantification of drugs of abuse is onerous, including sample treatment, extraction and clean up, especially regarding complex biological matrices. PS-MS allows the detection of analytes of toxicological interest in blood, plasma and urine using low sample volume. This review aims to discuss the potential use, advances and challenges of PS-MS in forensic toxicology.