Search

Purpose: To describe the postoperative evolution of visual acuity, flap morphology, and stromal optical density femtosecond laser-assisted laser in situ keratomileusis (FS-LASIK). Setting: Clinica Rementeria, Madrid, Spain. Design: Prospective case series. Methods: The study comprised 44 consecutive eyes that had FS-LASIK performed with the WaveLight FS200 and the Allegretto excimer laser to correct myopia. Visual outcomes, flap thickness, and stromal optical density were assessed 1 day, 1 week, 1 month, and 3 months postoperatively. Results: A statistically significant improvement in the mean uncorrected distance visual acuity at 1 day (0.94 +/- 0.2) and 1 week (0.93 +/- 0.2) to 1 month (1.04 +/- 0.2) and 3 months (1.11 +/- 0.1) postoperatively (P <.05). At 3 months postoperatively, the femtosecond laser had good outcomes in efficacy (0.98 +/- 0.1), safety (0.98 +/- 0.1), and predictability (100% of eyes were within +/- 0.5 D of emmetropia). The femtosecond-created flaps were slightly thicker than intended, the mean SD intraflap was 7.1 [mu]m, the range between the thickest and thinnest points in each flap was 25.4 [mu]m, and the mean flap thickness homogeneity was 7.6 [mu]m at 3 months postoperatively. A progressive decrease in the optical density of the flap stroma and the residual stromal bed was detected during follow-up. Conclusions: The femtosecond laser study appears to be a safe, effective, and predictable platform to obtain LASIK flaps. The flaps were planar and homogeneous but slightly thicker than intended. The optical density of the flap stroma was slightly higher at early follow-up and decreased over time. [ABSTRACT FROM AUTHOR]

To measure intraocular pressure (IOP) elevations in porcine eyes during laser in situ keratomileusis (LASIK) performed using 3 femtosecond laser platforms. Clínica Novovisión, Madrid, Spain. Experimental study. Three femtosecond devices, the iFS 150 kHz, which is the newest-generation IntraLase with a flat interface, and the Victus and LenSx, which are both dual femtosecond lasers with curved interfaces, were used to create lamellar corneal flaps in freshly enucleated porcine eyes. The IOP was recorded during placement of the suction ring on the eye (suctioning phase) and during the intrastromal laser application for flap creation (cutting phase) using a manometric technique with direct cannulation to the anterior chamber. Twenty-one eyes were analyzed (7 per group). The mean IOP increase during suctioning was significantly higher with the iFS system (78.14 mm Hg ± 23.6 [SD]) than with the Victus system (20.28 ± 6.7 mm Hg) (P =.0001). The LenSx system performed the suctioning and applanation phases simultaneously, making it impossible to obtain the results of the suctioning phase alone. The mean IOP elevation during the cutting phase was significantly lower with the LenSx system (20 ± 5.3 mm Hg) than with the iFS (108.1 ± 17.0 mm Hg) and Victus (96.4 ± 16.8 mm Hg) systems (P =.0001). The total surgical time was significantly lower with the LenSx system (17.21 ± 0.7 seconds) than with the iFS (25.10 ± 4.3 seconds) and Victus (33.40 ± 0.7 seconds) systems (P =.0001). The preliminary results suggest that the iFS and Victus systems induced higher IOP increases and required longer surgical times to cut a LASIK flap than the LenSx system. [ABSTRACT FROM AUTHOR]

To analyze the recovery of the subbasal nerve plexus in corneas treated with laser in situ keratomileusis (LASIK) at least 10 years prior compared with nonoperated corneas. Clínica Novovisión, Madrid, Spain. Prospective nonrandomized observational study. Eyes that had LASIK surgery at least 10 years before (LASIK group) were compared with nonoperated healthy eyes (control group). The subbasal nerve plexus morphology (main nerves density, nerve length, nerve branches density, grade of nerve tortuosity, and reflectivity) and the dendritic cell density from the confocal images obtained with the Heidelberg Retina Tomograph II were analyzed. The study comprised 47 eyes (27 eyes in the LASIK group and 20 eyes in the control group). The values were significantly lower in the LASIK group compared with the control group in main nerves density (9.15 nerves/mm2 ± 3.46 [SD] versus 11.75 ± 2.86 nerves/mm2; P =.009) and nerve branches density (2.96 ± 1.99 nerves/mm2 versus 5.35 ± 3.05 nerves/mm2; P =.002). No significant differences were found in nerve length, grade of nerve tortuosity, dendritic cell density, or subbasal nerve plexus reflectivity between the two groups. The outcomes suggested that the subbasal corneal nerve plexus did not completely recover its preoperative pattern at least 10 years after LASIK. Both main nerves density and nerve branches density continued to be significantly lower compared with virgin corneas after a mean 13-year follow-up, although other parameters of nerve morphology (nerve length, tortuosity, and reflectivity) returned to normal levels. [ABSTRACT FROM AUTHOR]

Purpose: To compare the induced corneal stromal bed roughness measured with atomic force microscopy (AFM) after LASIK flap creation with the IntraLase 60 kHz and the VisuMax femtosecond laser platforms. Methods: Three freshly enucleated porcine eyes were operated with each femtosecond laser in this experimental study. Standard LASIK treatment parameters were used for the experiment. After LASIK flap creation, the corneal stromal roughness was assessed using a JPK NanoWizard II® AFM in contact mode immersed in liquid. Olympus OMCL-RC800PSA commercial silicon nitride cantilever tips were used. Surface measurements were made in 10 regions of the central cornea of each sample measuring 20 x 20 microns, at 512 x 512 point resolution. Roughness was measured using the root-mean-square (RMS) value within the given regions. Results: Measurements from 30 regions of the 3 eyes (10 measurements per eye) in the Intralase (FS1) group, and 30 regions of the 3 eyes (10 measurements per eye) in the VisuMax (FS2) group were analyzed. There was a statistically significant difference in mean ± standard deviation RMS values between the FS1 and the FS2 groups (360 ± 120 versus 230 ± 100 nm respectively; P< 0.00001). Conclusion: This AFM study indicates that the surface of the stromal bed after LASIK flap creation is smoother in the FS2 group than the FS1 group. [ABSTRACT FROM AUTHOR]

Purpose: To assess the relevance of the homogeneity of femtosecond laser flap thickness regarding induction of higher-order aberrations (HOAs). Setting: Clinica Rementeria & Clinica Novovision, Madrid, Spain. Design: Prospective observational study. Methods: Two hundred thirty-one patients underwent in situ keratomileusis using 5 different femtosecond lasers. The flap thicknesses were measured using anterior segment optical coherence tomography 3 months postoperatively. The same masked observer measured 6 symmetrical points nasally and temporally 1.0 mm, 2.0 mm, and 3.0 mm from the center of the flap in each case. HOAs induced in the cornea were measured using tomography. Results: Positive and significant correlations were found between HOA induction and the flap thickness heterogeneity 3.0 mm from the center of the flap. Pearson correlation coefficients for the induction of HOAs were third-order 0.17112 (P =.0224), fourth-order 0.22474 (P =.0026), fifth-order 0.16449 (P =.0282), coma-like 0.17370 (P =.0204), and total HOAs 0.18182 (P =.0151). Conclusions: The amount of flap-thickness heterogeneity at 3.0 mm from the center of the flap created using femtosecond lasers was correlated with the magnitude of the HOAs induced. [ABSTRACT FROM AUTHOR]

Purpose: To describe and compare the stromal bed roughness obtained after laser in situ keratomileusis (LASIK) flap creation using a corneal femtosecond laser platform (iFS 150) and a "dual" femtosecond (FS) laser platform (LenSx). Methods: This ex vivo experimental study was conducted in an animal model using 12 freshly enucleated porcine eyes, six with each femtosecond laser. The standard laser treatment parameters were used for the experiment. After LASIK flap creation, the corneal stromal roughness was assessed using atomic force microscopy (AFM) in contact mode immersed in liquid. In each sample, surface measurements were obtained in 60 regions of six eyes per FS laser in 10 20 × 20-micron areas of the central corneal stroma at 512 × 512-point resolution. The surface roughness was measured and the root-mean-square (RMS) values of the roughness were obtained. Results: The mean RMS ± standard deviation values were 430 ± 150 nm for the corneal femtosecond laser platform and 370 ± 100 nm for the dual FS laser platform (P < 0.011). Conclusions: In this experimental study with AFM, we found smoother stromal beds after LASIK flap creation with LenSx compared to iFS 150 kHz. Further studies are needed to understand visual implications of the differences found. [ABSTRACT FROM AUTHOR]

To perform in vitro assessments of surface haze and roughness, subsurface nanoglistenings (SSNGs), and glistenings of a new hydrophobic acrylic intraocular lens (IOL) in comparison to commercially available IOLs. Universities of Utah and Alcalá, and Alcon Vision, LLC. Experimental study. The IOLs used were Clareon CNA0T0, Tecnis ZCB00 and Tecnis OptiBlue ZCB00V, Eternity W-60, enVista MX60, and Vivinex XY1. Surface haze was assessed by the pixel intensity units (PIU) from cross-sectional slitlamp images, and it was correlated to atomic force microscopy roughness. For SSNGs, the IOLs were artificially aged up to 10 years, followed by Scheimpflug densitometry (computer-compatible tape unit [CCTU]) measurements. For glistenings, the IOLs were immersed in a water bath and subjected to temperature changes before analysis. The surface haze (n = 10, PIU) was 4.25 ± 0.87 (SD) (CNA0T0), 9.50 ± 1.66 (ZCB00), 39.48 ± 1.97 (ZCB00V), 46.68 ± 3.16 (W-60), 44.70 ± 4.00 (MX60), and 4.42 ± 0.71 (XY1) (P <.001), which showed a strong correlation with surface roughness measurements (R = 0.94, P =.006). The densitometry (n = 10, CCTU at 10 years) was 7.30 ± 1.36 (CNA0T0), 11.88 ± 3.10 (ZCB00), 38.12 ± 2.24 (ZCB00V), 48.13 ± 9.44 (W-60), 20.20 ± 3.84 (MX60), and 6.75 ± 6.66 (XY1) (P <.001), with no significant differences between CNA0T0 vs. ZCB00 and XY1. The glistenings density (n = 30) was the lowest for the CNA0T0, W-60, and MX60 IOLs. The new Clareon CNA0T0, which is manufactured from a hydrophobic acrylic material, exhibited among the lowest levels of surface haze and roughness, SSNGs, and glistenings compared with other commercially available hydrophobic acrylic IOLs. [ABSTRACT FROM AUTHOR]