Search

Nano-structured materials gain a vast market acceptance mainly due to their overarching endurance. Nanofibrillar cellulose (NFC) is one example of an augmenting agent unviable for production by small and medium enterprises (SMEs) due to the underlying process complexity. This study aims to characterise the NFC-alternative cells denoted as TRX-cellsⓇ, which is a mix of cellulose and non-cellulose components, ruling out its status as ‘cellulose nanofibers, CNF’. The aim to test-fit the TRX-cells® production process into the circularity model was executed by deliberating on the usability of the byproduct. In doing so, fibrous oil palm empty fruit bunch (EFB) was treated with dioxydanyl radicals (DIOR) and homogenised. The rapid EFB-DIOR reaction at 70°C targeting dearomatisation reaction in a 10%-solid open system was performed before refining the DIOR-treated EFB to micro-scale fibres. Subjecting the micro-fibres to 17 kWh/mt PFI-milling yielded 85–95% of nano-scale fibrous mass. Relative to the stiff micro-fibres, the nano-scale cells web exhibit 34–41% softness enhancement judged from the web tear resistance profile associated with inter-fibre space reduction. Advanced chromatographic evidence for 27% xylan amongst TRX-cells®’ total aldo-sugars was one form of the non-cellulose nano-component. High-resolution Transmission Electron Microscopy hyphenated to Energy Dispersive Analysis of X-ray (HRTEM-EDX) elemental mapping showed a 0.4 atomic percentage of nano-biominerals, confirming the presence of the redistributed dearomatised cells adjacent to cellulose held in the web of the hemicellulose. Shearing at the dearomatised inter-cell wall layers by PFI mill peeled 5 nm–100 nm thickness laminae. The smorgasbord of cellulose and non-celluloses resulted in crystallinity comparable to softwood NFC of approximately 60%, with unique preservation and precision-printing enabling properties. Given the non-recyclability of the DIOR-treated EFB microfibres, nestling the rapid waste transformation process into the circularity model shed light on circular bio-nanotechnology to the spectrum of opportunity for zero-waste, reduced emission and net zero carbon practices on top of an added value from waste transformation to a product.

So far, a large number of pretreatment methods have garnered significant attention aimed only at optimizing the reducing sugar and bioethanol yields. This study however, carried out pretreatment of sugarcane bagasse (SCB) using hydrothermal, organosolv, alkaline and alkaline peroxide pretreatment methods comparing their process performance. An evaluation of the energy consumption parameter during pretreatment showed lowest energy use (0.619 kWh/kg) during 5% alkaline peroxide pretreatment. The energy efficiency (0.162 kg bioethanol/kWh) was thus highest whereas the waste generation was lowest (38.895 kg waste/kg bioethanol) during alkaline peroxide pretreatment process. The solid biomass was utilized for enzymatic saccharification and bioethanol fermentation using SSF. Maximum enzyme efficiency and bioethanol yields achieved were 85.02% and 0.101 kg bioethanol/kg biomass respectively. Process performance evaluation can be projected to open up a new avenue for practical implementations of life cycle analysis (LCA) and techno-economic assessment aiding the circular bio-economy approach. [Display omitted] • Chemical pretreatment technologies investigated for process performance evaluation. • Energy efficiency and waste generation used to evaluate process performance. • 0.162 kg bioethanol/kWh- energy efficiency during alkaline peroxide pretreatment. • Also, lowest waste generation (38.895 kg waste/kg bioethanol) was recorded. • NaOH and H 2 O 2 at 5% (w/w) chemical concentration was most effective pretreatment. [ABSTRACT FROM AUTHOR]

Conversion and reuse of furfural residues are of great significance as the furfural residues are pollution-carrying biomass waste resources. However, the furfural residues must be pretreated to remove the lignin so as to improve the conversion efficiency. Here, we firstly reported an efficient pretreatment method which integrated uses ionic liquid and alkaline peroxide and found the synergic effect of them on the pretreatment of furfural residues. The pretreatment using [Bmim]Cl and NaOH/H2O2 shows the highest lignin elimination efficiency of 75.09%, which is 1.95 times of that [Bmim]Cl and 1.55 times of that NaOH/H2O2, respectively. The highest yield of reducing sugars is 50.4%. The pretreatment synergistic effect is attributed to the swelling property of the ionic liquid and the delignification of the alkaline peroxide. The effect of ionic liquids structures on pretreatments was also researched and the ionic liquids with Cl and short branched chain are superior for the lignin removal. This article gives an alternative technique for the pretreatment and conversion of furfural residues. [ABSTRACT FROM AUTHOR]

Lignocellulosic materials are mainly consisted of lignin, cellulose, and hemicellulose. Lignin is recognized as the main obstacle for the enzymatic saccharification of cellulose towards the fermentable sugars' production. Hence, the removal of lignin from the lignocellulosic feedstock is beneficial for reducing the recalcitrance of lignocellulose for enzymatic attack. For this purpose, various different alkaline pretreatments were examined in order to study their effect on the enzymatic saccharification of wheat straw, as a typical lignocellulosic material. Results revealed that the alkaline pretreatments promoted delignification reactions. Regarding the removal of lignin, the most efficient pretreatments were alkaline treatment with hydrogen peroxide 10% and NaOH 2% autoclave with delignification efficiencies of 89.60% and 84.86% respectively. X-ray diffraction analysis was performed to enlighten the structural changes of raw and pretreated materials. The higher the delignification of the raw material, the higher the conversion of cellulose during enzymatic saccharification. In all cases after enzymatic saccharification, the cellulosic conversion was much higher (32–77%) than the untreated wheat straw (8.6%). After undergoing alkaline peroxide 10% pretreatment and cellulase treatment, 99% of the initial raw straw was eventually solubilized. Thus, wheat straw could be considered as an ideal material for the production of glucose with proper pretreatments and effective enzymatic hydrolysis. [ABSTRACT FROM AUTHOR]

The synthesis of carbon quantum dots (CQDs) from biomass through a "bottom-up" method has attracted a great deal of interest because of its outstanding environmental and economic advantages. However, the yield of biomass-based CQDs is still low due to the high polymerization of biochar. In this study, we propose a new approach for harvesting high-yield biomass-based CQDs by integrating mechanochemistry and strong chemical oxidation. Ball milling can reduce the particle size and resistance of biochar and increase the contents of C C, while the powerful oxidant HOO- produced by alkaline hydrogen peroxide can break C C to generate biomass-based CQDs. Using this two-step process, the yields of biomass-based CQDs reached 57.75% for blue-green algae, 65.8% for straw, 47.9% for corn protein meal, and 45.35% for Typha angustifolia. Based on the excellent sensitivity and selectivity for Fe3+ of biomass-based CQDs, CQDs paper-based sensors were prepared for expedient and precise detection of Fe3+ in surface water, wastewater treatment plant effluent, and tap water. When the Fe3+ content is between 0 and 60 μM, the R2 of Fe3+ detection by blue-green algae CQDs can reach 0.9956. This work provides a new and reliable method for the large-scale preparation of biomass-based CQDs and expands their environmental applications. [Display omitted] • A method was proposed to improve the yield of biomass-based carbon quantum dot (CQD). • Ball milling can reduce the resistance of biochar and increase the contents of C C. • This scalable method is applicable to other biomass wastes. • The CQDs has excellent sensitivity and selectivity for Fe3+. • The paper-based CQD sensors are applicable in different water bodies. [ABSTRACT FROM AUTHOR]

Moderate chemical pretreatment to increase the energy density and improve of chemical components, also called preconversion, is an emerging strategy to secure feedstock supplies in biorefinery systems. This study investigates the alkaline hydrogen peroxide (AHP) preconversion of softwood for its potential use at distributed depots, which are preprocessing facilities near natural resource sources. Specifically, this study quantified the effects of treatment conditions such as hydrogen peroxide concentration, reaction temperature, and time on chemical compositions and enzymatic hydrolysis. Results show that AHP preconversion led to the removal of lignin and hemicellulose from the recovered solids. Increasing the concentration of hydrogen peroxide decreased carbohydrate recovery after the preconversion process. There was no significant difference of total sugar yield from enzymatic hydrolysis at various hydrogen peroxide loadings. Carbohydrate recovery was over 96% after preconversion at 30 °C compared to that of the untreated sample. A longer reaction time increased the total enzymatic sugar yields. Morphological analysis revealed significant structure modification, with cracks and fragments in Douglas-fir after AHP preconversion. • AHP mild chemical preconversion improves the carbohydrates density of feedstock. • AHP prevonversion results in removal of partial hemicellulose and lignin. • The effect of AHP process conditions on carbohydrate recovery was elucidated. • Carbohydrate recovery of over 96% was obtained at lower temperature condition. [ABSTRACT FROM AUTHOR]

This study investigated the performance of recycled polypropylene (RPP)/peanut shell powder (PSP) composites with untreated PSP and treated PSP with alkaline peroxide. The RPP/PSP and RPP/PSP-H2O2 composites were prepared by melt mixing and compression molding at different PSP loadings (10 wt.% to 40 wt.%). The samples were characterized by processing properties, tensile properties, Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), and water absorption behavior. The treated PSP enhanced the stabilization torque, tensile strength, elongation at break, tensile modulus, and water absorption of RPP/PSP-H2O2 composites. FTIR spectra and SEM showed that the elimination of lignin content strongly influenced the fractured surface and chemical characteristics of the RPP/PSP-H2O2 composites.

This study investigated the performance of recycled polypropylene (RPP)/peanut shell powder (PSP) composites with untreated PSP and treated PSP with alkaline peroxide. The RPP/PSP and RPP/PSPH2O2 composites were prepared by melt mixing and compression molding at different PSP loadings (10 wt.% to 40 wt.%). The samples were characterized by processing properties, tensile properties, Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), and water absorption behavior. The treated PSP enhanced the stabilization torque, tensile strength, elongation at break, tensile modulus, and water absorption of RPP/PSP-H2O2 composites. FTIR spectra and SEM showed that the elimination of lignin content strongly influenced the fractured surface and chemical characteristics of the RPP/PSP-H2O2 composites. [ABSTRACT FROM AUTHOR]

[Display omitted] • A ball-mill assisted alkaline peroxide pretreatment process was developed. • 70% of XOS alone with high yield of fermentable sugars was achieved. • The pretreatment process was environmental-friendly. • The mechanism of enhanced enzymatic digestibility by BAP pretreatment was revealed. The aim of this work was to develop a feasible ball mill-assisted alkaline peroxide pretreatment followed by stepwise hydrolysis to improve the yield of xylo -oligosaccharides (XOS) and fermentable sugars. The hydrogen peroxide charge, ball-milling time, and solid-to-liquid ratio affected the compositions, particle sizes, morphology, and crystallinity of the corn stover, directly improving the following hydrolytic efficiency. The optimal pretreatment was with 0.45 g/g (H 2 O 2 : substrate) and 1:3 solid-to-liquid ratio (w/v) for 1.0 h ball-milling, resulting in 84.29% delignification. Physicochemical properties of the pretreated samples were characterized and their correlations to the enzymatic hydrolysis were revealed. Compared with one-step cellulase hydrolysis, the two-step xylanase-cellulase hydrolysis of the pretreated corn stover showed significant advance in preparing XOS, producing 69.65% (on the base of xylan content in pretreated sample) of XOS, along with 20.55% xylose, 68.94% glucose, and 21.15% gluco -oligosaccharides. The yield of XOS was 2–7 times higher than those in previous studies. [ABSTRACT FROM AUTHOR]