Search

This study used available or purchased equipment and an image reconstruction system developed by the college of dentistry to establish a basic self-assembled micro-computed tomography (micro-CT) system. Such a system would be suitable for teaching dental radiology to dental students. Specifically, it could help students to understand the principles governing dental cone-beam computed tomography (CBCT) and provide graduate students with a system for scanning small samples (e.g., individual teeth) during the early stages of research. The self-assembled micro-CT system was constructed using a portable dental X-ray tube, an intraoral digital X-ray detector, a high-precision rotation stage, related bracket accessories, and a notebook computer. Reconstructed images and three-dimensional models of the maxillary right third molar were produced using the self-assembled micro-CT system and an advanced commercially available micro-CT system (Skyscan 2211). Subsequently, the reconstructed images and 3D models produced using the two systems were compared by two senior dentists to determine whether considerable visual differences could be observed. Finally, the signal-to-noise ratio (SNR) was used for quantitative analysis and to compare the systems. Although the self-assembled micro-CT system produced image boundaries that were not as sharp as those of Skyscan 2211, the images were nonetheless remarkably similar. In addition, the two micro-CT systems produced 3D models that were almost identical in appearance and root canal shape. Quantitative analysis revealed that Skyscan 2211 had produced a SNR that was superior to that of the self-assembled micro-CT system, with the difference ranging from 36.77% to 136.22%; enamel, which has a higher density, exhibited lower SNR differences, whereas dentin, which has a lower density, exhibited higher SNR differences. The self-assembled micro-CT system with a resolution of 36 μm was created using a portable dental X-ray tube and an intraoral digital X-ray detector. Although the scanning time was relatively long (~30 min to scan images of a tooth), the images were adequate in the preliminary stage of experiments. More importantly, students were afforded the opportunity to observe the process of assembling and disassembling each component of a micro-CT scanner and thereby achieve a more comprehensive understanding of the principles governing micro-CT and dental CBCT. [ABSTRACT FROM AUTHOR]

Background/purpose: This study investigated the effects of three three-dimensional (3D) bone-to-implant contact (BIC) parameters-potential BIC area (pBICA), BIC area (BICA), and 3D BIC percentage (3D BIC%; defined as BICA divided by pBICA)-in relation to the implant diameter on primary implant stability, as well as their correlations were also evaluated.Methods: Dental implants with diameters of 3.75, 4, 5, and 6 mm and artificial bone specimens were scanned by microcomputed tomography to construct 3D models for calculating pBICA, BICA, and 3D BIC%. Indexes of the primary implant stability including the insertion torque value (ITV), Periotest value (PTV), and implant stability quotient (ISQ) were measured after implants with various diameters were placed into bone specimens. The Kruskal-Wallis test, Wilcoxon rank-sum test with Bonferroni adjustment, and Spearman correlations were all performed as statistical and correlation analyses.Results: The implant diameter significantly influenced pBICA and BICA, but not 3D BIC%. ITV and PTV were more sensitive to implant diameter than was ISQ. The coefficients of determination were high (>0.92) for the correlations between pBICA (or BICA) and indexes of the primary implant stability.Conclusion: This study revealed how the implant diameter and the three-dimensional (3D) BIC influence the primary stabilities of dental implant. ITV and PTV were more sensitively influenced by the implant diameter than ISQ. The pBICA and BICA seem to be more important than 3D BIC % for using wider implant in treatment plan, since those two parameters are highly predictive of variations in the primary stability of dental implant. [ABSTRACT FROM AUTHOR]

Background Dental implants have become reliable and predictable tools for treating missing teeth. The survival rate of dental implants is markedly influenced by the host bone quality and quantity of the jawbone. A better host bone provides higher initial stability of the dental implant, resulting in better osseointegration and a higher success rate. Host bone quality and quantity are determined by the crestal cortical bone thickness and inner cancellous bone density. Objective The purpose of this study was to determine the crestal cortical bone thickness at dental implant sites in different regions of the jawbone through the use of dental cone-beam computed tomographic (CBCT) images. Materials and Methods A total of 661 dental implant sites (81 in the anterior mandible, 122 in the anterior maxilla, 224 in the posterior mandible, and 234 in the posterior maxilla) were obtained from the jawbones of 173 humans. The data were subjected to statistical analysis to determine any correlation between crestal cortical bone thicknesses and jawbone regions using one-way analysis of variance with Tukey's post-test. Results The crestal cortical bone thicknesses at dental implant sites in the four regions decreased in the following order: posterior mandible (1.07 ± 0.47 mm, mean ± SD) >anterior mandible (0.99 ± 0.36 mm) >anterior maxilla (0.82 ± 0.30 mm) >posterior maxilla (0.75 ± 0.35 mm). Conclusion The dental CBCT data demonstrate that crestal cortical bone thickness varies markedly between dental implant sites in the four regions of the jawbone. [ABSTRACT FROM AUTHOR]