Search

The proposed study aims to discuss the methodology for measuring and evaluating controlled moisture distribution in woven fabric surfaces in the first part and the construction of woven fabric using hydrophobic and hydrophilic cotton yarns in the second part. Moisture distribution can be controlled in terms of the anisotropic (horizontal and vertical) and isotropic characteristics of the wetting of the cotton woven fabrics based on the combination of hydrophobic and hydrophilic threads. A set of experimental samples using hydrophobic and hydrophilic threads in warp and weft was produced to monitor the moisture (water) distribution in woven fabric surfaces. For evaluating the controlled distribution of moisture (water) in these atypical woven fabric constructions, an algorithm (methodology) was proposed, where the object (liquid) was separated from the background (fabrics) and various objects and geometric characteristics depending on time were evaluated on the object. The algorithm itself consisted of several steps and was executed in a loop for the current frame at a given time. [ABSTRACT FROM AUTHOR]

Carbon fiber bundles decorated with titanium dioxide/cadmium sulfide heterojunction can be weaved into photocatalyst cloth for eliminating various contaminants. Semiconductor heterojunction powders have exhibited the enhanced photocatalytic activities, but their practical applications have been limited due to their poor recycling performance from flowing wastewater. To solve these problems, with carbon fibers (CFs) as the fixing substrate, we constructed TiO 2 /CdS heterojunction as a model on CF surface by utilizing a hydrothermal-chemical bath deposition method. CFs/TiO 2 /CdS bundles display a wide photoabsorption with two photoabsorption edges (~410 and 520 nm). Furthermore, CFs/TiO 2 /CdS bundles can be weaved into macroscopical cloth (such as weight: 0.1 g, area: 4 × 4 cm2) which have considerable photocurrent density of 5.75 × 10−6 A/cm2. Under visible light irradiation (λ > 400 nm), macroscopic CFs/TiO 2 /CdS cloth can degrade 95.44% methylene blue (MB), 64.95% acid orange 7 (AO7), 91.37% tetracycline hydrochloride (TC) and remove 90.70% hexavalent chromium (Cr(VI)) after 120 min, higher than those by CFs/CdS (43.42% MB, 37.42% AO7, 31.76% TC and 30.45% Cr(VI)) or CFs/TiO 2 (12.84% MB, 10.48% AO7, 11.85% TC and 15.58% Cr(VI)). Thus, CFs/TiO 2 /CdS can act as a weavable and efficient photocatalyst for eliminating various pollutants from wastewater. [ABSTRACT FROM AUTHOR]

The scholarship cultural interactions in Latin America and its recent history: a critical perspective and a proposal. The multiplicity of cultural flows as well as the internal movement in them between the different literary systems conduct us to think a system of relations where many cultural contributions interfere at the same time or in sequence, in a specific time scale for each situation, where the crossroads can consolidate or not, where each flow has at the time a different energy from the historic contextand that is why there are hegemonic and subaltern ones. It can be seen as knitting, a weave, in constant movement. [ABSTRACT FROM AUTHOR]

In this article, the author discusses his research on Tantric Buddhism, referencing the book "Goddess and God in the World: Conversations in Embodied Theology" by Carol Christ and Judith Plaskow. Topics include the alternatives to theologies that justify domination and exploitation of humans, other species, and the earth; analysis of a Tantric Buddhist dance practice in Kathmandu, Nepal; role of dance as a yoga for karmic cleansing Tantric tradition.

The concept of 'variation' described by Josef Albers for the development of his educational methodology and extendedin his reference work Interaction of color, shows a ligature to the construction process of Anni Albers' textile reticle. It is a rigid support where it turns out physically impossible to mix colours. It is for this reason that Anni Albers research on weaving color is realized from highly stimulant resources. [ABSTRACT FROM AUTHOR]

The tsombiach or traditional wool sash of the Kamentsa indigenous women from the high Putumayo presents symbolically and synthetically, the traditional history of the community and their creators and carriers' personal experiences, who narrate with a particular aesthetic how the weave lifts community life.The article accounts for the interrelationship and integration of this type of textual and oral expression with literature. The methodological keys are based on the the author's ethnographic experience and a theoretical approach from notions of symbolic anthropology and the alternative perspective of heterogeneous literatures. [ABSTRACT FROM AUTHOR]

Fabric defects that occur during weaving production causes wastage at garment production. If fabric defects can not be detected during garment production, causes separation of the finished product as second quality. In this study, in a weaving mill, raw fabrics were inspected during three weeks for defect detection after weaving operation and results were investigated using statistical methods. Detected fabric defects has been classified and noted on quality control charts. For statistical investigation of number of defects pareto analysis and p control charts were used from statistical process control methods. [ABSTRACT FROM AUTHOR]

Fabric defects that may occur at different stages of woven terry fabric production requires quality control and classification of fabrics as first or second grade before sending to customer. In this study, before shipping of two different terry fabric orders, defects were detected by inspection of fabric rolls on a lighted control board by experienced experts. Number of the defects and dimensions of the defects seen during the inspection were noted on quality control charts. Detected defects were defined and scored according to different demerit point systems. In this way, the fabric rolls were classified according to the demerit point systems before being shipped to garment enterprises. Disputes can be avoided with classification made by a demerit point system on which manufacturer and the customer have agreed. [ABSTRACT FROM AUTHOR]

In this study, the number of specific woven fabric defects occured on raw terry fabrics during weaving production were investigated with statistical process control techniques. Raw fabrics of a selected standart fabric production were inspected for defect detection after weaving operation in a towel production company. Defects were detected by inspection of fabric on a lighted control board by experienced experts. Number of defects were noted on quality control charts. Applying pareto analysis, defects were revealed that formed 80% of total defects. Cause-effect diagrams and p control charts were created and solution suggestions to avoid these defects were presented keeping in mind that eliminating elementary causes, which is 20% of total problems, can resolve 80% of resources of problems. [ABSTRACT FROM AUTHOR]

Over the last decade, the progressive application of natural fibres in polymer composites has had a major effect in alleviating environmental impacts. Recently, there is a growing interest in the development of green materials in a woven form by utilising natural fibres from lignocellulosic materials for many applications such as structural, non-structural composites, household utilities, automobile parts, aerospace components, flooring, and ballistic materials. Woven materials are one of the most promising materials for substituting or hybridising with synthetic polymeric materials in the production of natural fibre polymer composites (NFPCs). These woven materials are flexible, able to be tailored to the specific needs and have better mechanical properties due to their weaving structures. Seeing that the potential advantages of woven materials in the fabrication of NFPC, this paper presents a detailed review of studies related to woven materials. A variety of factors that influence the properties of the resultant woven NFRC such as yarn characteristics, fabric properties as well as manufacturing parameters were discussed. Past and current research efforts on the development of woven NFPCs from various polymer matrices including polypropylene, polylactic acid, epoxy and polyester and the properties of the resultant composites were also compiled. Last but not least, the applications, challenges, and prospects in the field also were highlighted. [ABSTRACT FROM AUTHOR]

Water transfer through porous textiles consists of two sequential processes: synchronous wicking–evaporating and evaporating alone. In this work we set out to identify the main structural parameters affecting the water transfer process of cotton fabrics. Eight woven fabrics with different floats were produced. The fabrics were evaluated on a specially designed instrument capable of measuring the water loss through a vertical wicking process. Each test took 120 min, and two phases were defined: Phase I for the first 10 min and Phase II for the last 110 min according to wicking behavior transition. Principal components and multivariate statistical methods were utilized to analyze the data collected. The results showed that Phase I dominated the whole wicking–evaporating process, and the moisture transfer speed in this phase varied with fabric structure, whereas the moisture transfer speeds in Phase II were similar and constant regardless of fabric structure. In addition, fabric with more floats has high water transfer speed in Phase I due to its loosened structure with more macropores. [ABSTRACT FROM AUTHOR]