Search

The objective of this paper was to study the sCO2 cycle as a waste heat recovery system for a 180 kW biogas engine. The research methodology adopted was numerical simulations through two models built in different programs: Aspen HYSYS and GT Suite. The models were used to optimize the design and thermodynamic parameters of a CO2 cycle in terms of system power, system efficiency, expander, and compressor efficiency. Depending on the objective function, the sCO2 cycle could provide additional power ranging from 27.9 to 11.3 kW. Based on the calculation performed, "Recuperated cycle at maximum power" was selected for further investigation. The off-design analysis of the system revealed the optimum operating point. The authors designed the preliminary dimensions of the turbomachinery, i.e., the rotor dimension is 16 mm, which will rotate at 100,000 rpm. [ABSTRACT FROM AUTHOR]

In recent years, due to the very intensive development of renewable sources (working in a very irregular and unpredictable way), energy storage has acquired a special importance for the stability of the power system. There are many methods of energy storage, but only two have adequate capacity and power: Pumped Hydro Storage (PHS) and Compressed Air Energy Storage (CAES). The article presents energy analysis of energy storage system based on compressed air inside underground mining caverns. A dynamic mathematical model of CAES system of parameters and structure similar to the Huntorf type power plant was constructed. Filling and emptying of the cavern with compressed air was numerically simulated. Balance calculations for selected configuration of the system was performed. Four different equations were used to describe the efficiency of the storage.

This article deals with a thermal energy storage system in the form of a water tank with a thermocline. The well-known thermocline phenomenon is modeled using computational fluid dynamics (CFD). However, the reservoir model proposed in this article is zero-dimensional. This is due to the fact that the aim of this article is to build a mathematical model that will be more useful in mathematical models of complex energy systems in which a hot water tank is one of many elements of the system. In such a zero-dimensional mathematical model, the hot water tank will be modeled using equations describing heat transfer, and the thermocline itself will be treated as a heat transfer surface with known dimensions and heat transfer coefficient. A novelty of this paper is that it addresses heat loss across the thermocline as defined in this manner. A CFD model of a thermal storage tank is created, validated with available experimental data, and used to obtain the heat transfer coefficient U. The resulting value is then analyzed quantitatively and qualitatively and the changes in the thickness of the thermocline are accounted for in the equation. The results from this groundbreaking work can be used to analyze heat storage in the form of thermocline water tanks at the level of system modeling, e.g., for the purpose of configuring the structure of other devices and control systems. [ABSTRACT FROM AUTHOR]