Search

Identification of archaeological and historical textile fibres is important because it gives insight into resource management in former times. The arrival of new tools such as table-top scanning electron microscopes, have led to an increased interest in the topic. Unfortunately, there have been cases where a lack of documentation regarding instrument settings and selection criteria has led to questionable conclusions being drawn. Optical and scanning electron microscopy are powerful techniques, but they must be used correctly and with proper knowledge of their limitations. Furthermore, ancient fibre material is often difficult to examine due to issues such as sample degradation, mineralization and the scarcity of material, which means that conclusions based on a statistical analysis of a large number of fibres are essentially not possible. In a cultural heritage context, it is therefore essential to distinguish between characteristic features, by which we mean features that are often, but not always present in a particular species and distinguishing features, which are always present in a particular species and can therefore be used for identification even if only a small amount of sample material can be examined. We argue that the community will have to accept that, quite often, a secure identification is not possible and that absolute statements such as: "This textile is made of flax" will often have to be replaced by relative statements such as "The material is likely to be flax". In this paper, we address these issues as follows: first, we present a fibre identification diagram which can be used, with some limitations, to distinguish between flax, hemp, nettle, jute, hops, and cotton using optical and electron microscopy. We then move on to highlight some of the typical pitfalls of using optical and electron microscopy for fibre identification. Finally, we present measurement documentation tables for optical and electron microscopy images, which we suggest should always be included in publications. Material scarcity means that the amount of material used for investigations should be kept at an absolute minimum. It is thus crucial that results are published with proper documentation so that measurements do not need to be repeated (more material is used) in future studies. It is our hope that the measurement documentation tables will be adapted by the community and used in future publications in the field. The paper finishes with a demonstration example, presenting a fibre analysis of Viking Age textile fragments from the 10th Century with documentation tables. [ABSTRACT FROM AUTHOR]

Global warming has led to a change in climatic conditions. Since 2006, drought has contributed to a reduction of food production and other agriculture-based products in many countries. The accumulation of greenhouse gases in the atmosphere has caused some changes in the composition of fruits and vegetables, making them less nutritious. To analyse this situation, a study was conducted on the effect of drought on the quality of fibres provided by the main fibre crops in Europe, namely flax (Linum usitatissimum). The experiment consisted of growing flax under controlled comparative conditions with designed different irrigation levels, such as 25%, 35% and 45% field soil moisture. Three varieties of flax were grown in 2019, 2020 and 2021 in the greenhouses of the Institute of Natural Fibres and Medicinal Plants in Poland. Fibre parameters, such as linear density, length and strength, were evaluated according to relevant standards. In addition, scanning electron microscope images of the cross-section and longitudinal view of the fibres were analysed. The results of the study indicated that deficiency of water during the flax growing season resulted in lowering of fibre linear density and tenacity. [ABSTRACT FROM AUTHOR]

A persistent rise in the costs of construction materials has led to the need to address this problem in line with the Sustainable Development Goals. This research employed vegetal soft and rigid fibers in a screed mortar to produce a sustainable fabric–cement matrix. Four different vegetal-dried fibers (hemp, flax, miscanthus, and bamboo) with dosages of 0.4, 0.6, 0.8, 1.2, 2, and 4 kg/m3 were used. Laboratory investigations were slump test, bulk density, air occluded, shrinkage, and mechanical strength. Scanning Electron Microscope (SEM) assessments were performed and analyzed on the natural fibers and the screed formulation. The results highlight that fiber dosages significantly influence the above-mentioned properties. [ABSTRACT FROM AUTHOR]

Organic fiber biocomposites have figured prominently in various industries of commerce during the last 3 to 5 years owing to their remarkable physical and mechanical abilities. The main purpose of this experimental research is to evaluate the biomechanical and geomorphologic belongings of nanostructured substance under naturalistic situations. To accomplish such a cognitive approach, flaxseed strands are employed as reinforcing, nano-based graphene as an additive, and epoxy as a matrix phase, with the following restrictions in imagination: (i) fiber lengths, (ii) fiber volume fraction, and (iii) weight proportions of nanoparticles. The nanocomposites are combined by means of the hand lay-up process based on the Taguchi orthogonal specification. The material characteristics of the substance, like bending, tension, and shock characteristics, are assessed in line with the standard specification. The material properties of mixtures' second levels are the highest when compared to all other configurations. The elastic modulus of nanoparticle biocomposites revealed that 2% graphene provides 32.39 percent, 4% graphene provides 36.39 percent, and 6% nanoparticle pertains to 31.23 percent. Fractured images captured using scanning electron microscope of cracked samples have been used to comprehend the overall failure mechanism of a composite in mechanical characterization. [ABSTRACT FROM AUTHOR]

A mixed microbiologically composite made from natural Linum usitatissimum fibers with nano-reinforced organic plastics can improve properties while being environmentally friendly. The inclusion of aluminium tris hydroxide particles into an organic polymer enables it to maintain stiffness without sacrificing durability, even while improving barriers and material characteristics. A study of numerous composite samples verified this complementary effect, with combinations including 10 percent EMS and 2.6 wt.% ATH retaining the resin's stiffness, stress to breakage, and mechanical properties while improving durability. Mechanical tests such as tensile and impact strength were discovered using the conventional ASTM test plan. Best-practice designs which maximize constituent interactions are thus attainable, and the research findings serve as the basis for discovering this balance, thereby broadening the spectrum of microbiologically polymer nanocomposites. The cracked surfaces of the nanomaterials, and the amount of dispersion of an ATH filler, were examined using a scanning electron microscope. [ABSTRACT FROM AUTHOR]

The study investigated the effectiveness of the combination of chemical and physical methods of natural fibers' modification. The long flax fibers were subjected to various types of modification. These were silanization, plasma modification and a combination of these methods. For the silanization process, two types of silanes were used: amino- and vinylsilane. The application of structurally different compounds allowed us to acquire knowledge about the effect of the modifier structure on its properties. Various properties of flax fibers were investigated, comparing the results before and after different modification processes. The flammability of prepared samples were tested by pyrolysis combustion flow calorimeter (PCFC). In the effect of the natural fibers' modifications, flammability was reduced even by 30%. The thermal stability of modified fibers increased. The FTIR tests of the gases released during thermal degradation of the tested fibers allowed us to determine the important compounds and prove a lower degree of flax-fiber decomposition after modification. Flax fibers were also tested to evaluate their physical properties (linear mass, average diameter, aspect ratio and hygroscopicity). Changes in surface morphology were observed by scanning electron microscope (SEM). The properties of natural fibers improved significantly, thus contributing to an increase in their suitability for the use in composites. [ABSTRACT FROM AUTHOR]

This study assessed the impact of alkali treatment of hemp and flax fibers on mechanical properties (determined by means of the uniaxial tensile test, impact tensile strength test and hardness test), processing properties (the course of the extrusion and injection process) and usable properties (shrinkage of molded pieces, degree of water absorption) of biocomposites on the base of poly (3-hydroxybutyric-co-3-hydroxyvaleric acid) (PHBV) biopolymer. For this purpose, 1 mm of length flax and hemp fibers was surface-modified by means of aqueous solution of NaOH (sodium hydroxide) with concentrations of 2%, 5% and 10%. The composites were made using the extrusion technology. The test specimens were produced by injection molding technology. In total, eight types of biocomposites with modified and non-modified fibers were produced, and each biocomposite contained the same filler content (15 wt.%). Their properties were compared in some cases with pure PHBV polymer. In the case of biocomposites filled with hemp fibers, it was noted that an increase of the alkalizing solution concentration improved most of the tested properties of the obtained biocomposites. On the other hand, in the case of flax fibers, there was a significant decrease in most of the mechanical properties tested for the composite containing fibers etched by 10% NaOH solution. The obtained results were verified by examining fibers and the destroyed specimens with a scanning electron microscope (SEM) and an optical microscope, which confirmed, especially, the significant geometry changes of the flax fibers etched by 10% NaOH solution. This procedure also resulted in a significant change of processing properties—a composite of this fiber type required about 20 °C lower temperature during the extrusion and injection molding process in order to obtain the right product. These results lead to the important conclusion that for each filler of the plant-origin and polymer matrix, the fiber alkalization method should be selected individually in order to improve the specific properties of biocomposites. [ABSTRACT FROM AUTHOR]