Search

D.C., J.M., P.T. and S.W. acknowledge the financial support of the Tidal Stream Industry Energiser project (TIGER), which is co-financed by the European Regional Development Fund through the Interreg France (Channel) England Programme. A.A. acknowledges the support of NERC through the Industrial Innovation fellowship grant no. NE/R013209/2. D.G., B.S., T.S., D.W., R.W. and B.W. acknowledge EPSRC for supporting part of this work through EP/S000747/1. G.H. and C.S. acknowledge support by the Scottish government-funded Marine Mammal Scientific Support Programme MMSS/002 with additional resources from the Natural Environment Research Council grant nos. NE/R014639/1 and NE/R015007/1. M.L. acknowledges the support of the Smart Efficient Energy Centre (SEEC) at Bangor University, part-funded by the European Regional Development Fund (ERDF), administered by the Welsh Government, and the EPSRC METRIC fellowship grant no. (EP/R034664/1). L.M. acknowledges the financial support of an EPSRC PhD studentship award, grant no. EP/R513052/1(18-22). J.McN. acknowledges the financial support of R.Willden’s EPSRC Advanced Fellowship grant no. EP/R007322/1. S.N. acknowledges the support of SEEC (Smart Efficient Energy Centre) at Bangor University, part-funded by the European Regional Development Fund (ERDF), administered by the Welsh Government. This review provides a critical, multi-faceted assessment of the practical contribution tidal stream energy can make to the UK and British Channel Islands future energy mix. Evidence is presented that broadly supports the latest national-scale practical resource estimate, of 34 TWh/year, equivalent to 11% of the UK’s current annual electricity demand. The size of the practical resource depends in part on the economic competitiveness of projects. In the UK, 124 MW of prospective tidal stream capacity is currently eligible to bid for subsidy support (MeyGen 1C, 80 MW; PTEC, 30 MW; and Morlais, 14 MW). It is estimated that the installation of this 124 MW would serve to drive down the levelized cost of energy (LCoE), through learning, from its current level of around 240 £/MWh to below 150 £/MWh, based on a mid-range technology learning rate of 17%. Doing so would make tidal stream cost competitive with technologies such as combined cycle gas turbines, biomass and anaerobic digestion. Installing this 124 MW by 2031 would put tidal stream on a trajectory to install the estimated 11.5 GW needed to generate 34 TWh/year by 2050. The cyclic, predictable nature of tidal stream power shows potential to provide additional, whole-system cost benefits. These include reductions in balancing expenditure that are not considered in conventional LCoE estimates. The practical resource is also dependent on environmental constraints. To date, no collisions between animals and turbines have been detected, and only small changes in habitat have been measured. The impacts of large arrays on stratification and predator–prey interaction are projected to be an order of magnitude less than those from climate change, highlighting opportunities for risk retirement. Ongoing field measurements will be important as arrays scale up, given the uncertainty in some environmental and ecological impact models. Based on the findings presented in this review, we recommend that an updated national-scale practical resource study is undertaken that implements high-fidelity, site-specific modelling, with improved model validation from the wide range of field measurements that are now available from the major sites. Quantifying the sensitivity of the practical resource to constraints will be important to establish opportunities for constraint retirement. Quantification of whole-system benefits is necessary to fully understand the value of tidal stream in the energy system. Publisher PDF

The 2019/2020 Australian bushfires (or wildfires) burned the largest forested area in Australia's recorded history, with major socio-economic and environmental consequences. Among the largest fires was the 280 000 ha Green Wattle Creek Fire, which burned large forested areas of the Warragamba catchment. This protected catchment provides critical ecosystem services for Lake Burragorang, one of Australia's largest urban supply reservoirs delivering ~85% of the water used in Greater Sydney. Water New South Wales (WaterNSW) is the utility responsible for managing water quality in Lake Burragorang. Its postfire risk assessment, done in collaboration with researchers in Australia, the UK, and United States, involved (i) identifying pyrogenic contaminants in ash and soil; (ii) quantifying ash loads and contaminant concentrations across the burned area; and (iii) estimating the probability and quantity of soil, ash, and associated contaminant entrainment for different rainfall scenarios. The work included refining the capabilities of the new WEPPcloud-WATAR-AU model (Water Erosion Prediction Project cloud-Wildfire Ash Transport And Risk-Australia) for predicting sediment, ash, and contaminant transport, aided by outcomes from previous collaborative postfire research in the catchment. Approximately two weeks after the Green Wattle Creek Fire was contained, an extreme rainfall event (~276 mm in 72 h) caused extensive ash and sediment delivery into the reservoir. The risk assessment informed on-ground monitoring and operational mitigation measures (deployment of debris-catching booms and adjustment of the water supply system configuration), ensuring the continuity of safe water supply to Sydney. WEPPcloud-WATAR-AU outputs can prioritize recovery interventions for managing water quality risks by quantifying contaminants on the hillslopes, anticipating water contamination risk, and identifying areas with high susceptibility to ash and sediment transport. This collaborative interaction among scientists and water managers, aimed also at refining model capabilities and outputs to meet managers' needs, exemplifies the successful outcomes that can be achieved at the interface of industry and science. Integr Environ Assess Manag 2021;17:1151–1161. © 2021 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC)., During manuscript preparation J. Neris, C. Santin, R. Lew, and S.H. Doerr were supported by a Natural Environment Research Council grant (NE/R011125/1).

The evaluation of sediment quality is a relevant topic that involves the analysis of various parameters that are altered by natural or anthropogenic causes. Therefore, the Grey Clustering method provides an alternative to evaluate sediment quality. In the present study, the sediment quality of the Chontayacu river watershed was evaluated considering the results of the monitoring of twenty-three points carried out in the early evaluations by the Environmental Impact Evaluation Agency (OEFA by its Spanish acronym). These twenty-three points were separated into three blocks considering the monitoring points upstream of the Uchiza town center and the Chontayacu Alto and Chontayacu Bajo hydroelectric plants. Seven parameters were analyzed: As, Cd, Cr, Cu, Pb, Hg and Zn, which were compared with Canadian sediment quality standards for the protection of aquatic life. The results of the assessment showed that all points in the Chontayacu River were classified as having unlikely adverse biological effects from heavy metals. However, a quality ranking was established between the points of each block where it was found that points P3, P4 and P17 correspond to the lowest values for the high CH, low CH and CP Uchiza blocks respectively. Finally, the results obtained will provide integrated information for decision making by the competent authorities in Peru, as well as indicate the level of sediment contamination that should be taken into account for the proposal of hydroelectric projects that influence sediment transport and entrainment.

Refined assessments of the available tidal stream energy resource are required to optimize turbines design and guarantee successful implementations and operations of devices in the marine environment. Investigations primary focused on identifying areas with maximum current speeds. However, further information may be reached by exhibiting (i) resource temporal variability, (ii) superimposed effects of meteo-oceanographic conditions (including especially wind-generated surface-gravity waves), and (iii) potential environmental impacts of operating turbines at the regional (e.g., changes in sediment transport and surrounding seabed features, effects on marine water quality, etc.) and local (wake-wake interactions and energy output) scales. These aspects are here investigated by reviewing a series of research studies dedicated to the Fromveur Strait off western Brittany, a region with strong potential for tidal array development along the coast of France. Particular attention is dedicated to the exploitation of combined in-situ and remote-sensing observations and numerical simulations. Beyond a site specific characterization of the tidal stream energy resource, this review promotes a series of original approaches and analysis methods for turbines optimization, thus complementing technical specifications to secure the key steps of a tidal energy project and promote the growth of a reliable tidal stream energy exploitation.

The development of tidal energy in Australia is still a challenge with few studies performed on the characterisation of the resource, due to the difficulty to acquire data and uncertainties about the influence of this anthropogenic activity on the marine environment. Changes in flow could lead to alterations in sediment transport and have further influence on the marine habitat. A case study in a promising area, Banks Strait (Australia), was created using high resolution 2D and 3D models validated against in situ data to investigate changes to hydrodynamic conditions with two scenarios of tidal farms (100 and 300 turbines). Comparison between 2D and 3D is performed to find the best compromise between model accuracy and computational time for preliminary assessment. Changes to current speed and bed shear stress over a 35 day period were found to be localised around the tidal farms and did not extent more than 7 km from the farm (300 turbines) for both 2D and 3D. The results showed that for near field and far field, 2D models are sufficient to give a first approximation of the hydrodynamic influence of tidal farm deployment on its environment.

The presence and magnitude of sediment contamination remaining in a completed dredge area can often dictate the success of an environmental dredging project. The need to better understand and manage this remaining contamination, referred to as "postdredging residuals," has increasingly been recognized by practitioners and investigators. Based on recent dredging projects with robust characterization programs, it is now understood that the residual contamination layer in the postdredging sediment comprises a mixture of contaminated sediments that originate from throughout the dredge cut. This mixture of contaminated sediments initially exhibits fluid mud properties that can contribute to sediment transport and contamination risk outside of the dredge area. This article reviews robust dredging residual evaluations recently performed in the United States and Canada, including the Hudson River, Lower Fox River, Ashtabula River, and Esquimalt Harbour, along with other projects. These data better inform the understanding of residuals generation, leading to improved models of dredging residual formation to inform remedy evaluation, selection, design, and implementation. Data from these projects confirm that the magnitude of dredging residuals is largely determined by site conditions, primarily in situ sediment fluidity or liquidity as measured by dry bulk density. While the generation of dredging residuals cannot be avoided, residuals can be successfully and efficiently managed through careful development and implementation of site-specific management plans. Integr Environ Assess Manag 2018;14:335-343. © 2018 The Authors. Integrated Environmental Assessment and Management Published by Wiley Periodicals, Inc. on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

Effective management of marine environments requires a sound understanding of the relevant physical sedimentary sciences. Environmental impact assessment (EIA) is a key management and decision-making tool employed in Australia for coastal and marine developments. This article examines the veracity of the application of the marine physical sciences within the EIA process, using turbidity measurement and sediment transport pathways as examples. A review of EIA guidance reveals deficiencies in regulation. Turbidity measurement is poorly understood and performed in current practice, while a focus on protecting marine habitats largely ignores those physical sedimentary processes, such as long-term bed-sediment transport pathways, that create and maintain these habitats. Thus evaluations of impacts of offshore activities such as channel dredging and spoil emplacement at sea are fundamentally flawed. An extensive body of scientific knowledge is already available on marine physical processes, and equivale...

The presence of anthropic activity in the coastal or riverine environment modifies the wave as well as the water and sediment current regime. In particular, the body of water around ports is an area where intense currents and sediment transport rates are usually present and can be affected by low water velocities that take place close to the entrance and inside the port basin. Consequently, sediment can be entrained and accumulated in such areas, creating problems to navigation. Ports and moorings are filled with fine sediments due to deposition resulting from solid transport. In particular, silt particles settle because of the weak vertical and lateral shearing of the velocity field. The result is that harbours frequently require ordinary maintenance dredging. The dredging process involves the removal of sediment in its natural deposited condition by using either mechanical or hydraulic equipment. Dredging is a consolidated and proven technology, but involves considerable drawbacks. In particular, dredging has a notable environmental impact on marine flora and fauna, contributes to the mobility and diffusion of contaminants and pollutants already present in the silted sediments, obstructs navigation and is characterized by relatively high and low predictable costs. This paper aims to provide an original structured overview of technologies alternative to dredging that have been tested in the past 50 years. More than 150 articles have been analysed to compare standard dredging technologies with market-ready competitors from techno-economic and environmental perspectives. In particular, the paper focuses on anti-sedimentation infrastructures and on innovative plant solutions characterized by low maintenance costs and by a very limited environmental impact. The final aim of the paper is to describe the currently available technologies that prevent port inlet and channel siltation and to classify them through a techno-economic and environmental impact assessment. The comparison shows that dredging has both the higher costs and environmental impact, while fixed sand by-passing plants are characterized by the lowest environmental impact and operation costs that are competitive with dredging.

Wave energy converter (WEC) arrays deployed in coastal regions may create physical disturbances, potentially resulting in environmental stresses. Presently, limited information is available on the nature of these physical disturbance or the resultant effects. A quantitative Spatial Environmental Assessment Tool (SEAT) for evaluating the potential effects of wave energy converter (WEC) arrays on nearshore hydrodynamics and sediment transport is presented for the central Oregon coast (USA) through coupled numerical model simulations of an array of WECs. Derived climatological wave conditions were used as inputs to the model to allow for the calculation of risk metrics associated with various hydrodynamic and sediment transport variables such as maximum shear stress, bottom velocity, and change in bed elevation. The risk maps provided simple, quantitative, and spatially-resolved means of evaluating physical changes in the vicinity of a hypothetical WEC array in response to varying wave conditions. The near-field risk of sediment mobility was determined to be moderate in the lee of the densely spaced array, where the potential for increased sediment deposition could result in benthic habitat alteration. Modifications to the nearshore sediment deposition and erosion patterns were observed near headlands and topographic features, which could have implications for littoral sediment transport. The results illustrate the benefits of a risk evaluation tool for facilitating coastal resource management at early market marine renewable energy sites.

The purpose of the study is to reveal changes of the hydrodynamics and sediment transport induced into the river channel by the operation of small hydropower plants (SHPs). A 36-km reach of...

Hydrodynamics and sediment transport are key physical processes contributing to habitat structure within the marine environment. Coastal development that results in the alteration of these processes (e.g., changing water flushing and/or sedimentation rates) can have detrimental impacts on sensitive systems. This is a current, relevant issue in Qatar as its coastal regions continue to be developed, not only around the capital of Doha, but in many areas around this Arabian Gulf peninsula. The northeastern Qatari coast is comprised of diverse and sensitive flora and fauna such as seagrass and macroalgae meadows, coral reefs and patches, turtles, and dugongs that tolerate harsh environmental conditions. In the near future, this area may see a rise in anthropogenic activity in the form of coastal development projects. These projects will add to existing natural stresses, such as high temperature, high salinity, and low rates of precipitation. Consequently, there is a need to characterize this area and assess the potential impacts that these anthropogenic activities may have on the region. In the present study, a novel sediment transport model is described and used to demonstrate the potential impact of altering hydrodynamics and subsequent sediment transport along the northeastern Qatar nearshore marine environment. The developed models will be tested using potential scenarios of future anthropogenic activities forecasted to take place in the area. The results will show the effects on water and sediment behavior and provide a scientific approach for key stakeholders to make decisions with respect to the management of the considered coastal zone. Furthermore, it provides a tool and framework that can be utilized in environmental impact assessment and associated hydrodynamic studies along other areas of the Qatari coastal zone. Integr Environ Assess Manag 2018;14:240-251. © 2017 SETAC.

The modern climate trend and population growth have dramatically increased the need for maximization of the net benefit from the existing storage space in freshwater reservoirs. However, sedimentation in reservoirs through physical deposition and/or slope failures is a major threat to their productivity and life expectancy. In this context, the sedimentation impact on the sustainability of Mornos Lake/Reservoir, which is exceptionally vital for the ~ 3.1 million inhabitants of Athens, had to be evaluated. Therefore, a meticulous geophysical survey of the reservoir bed was conducted in 2015 for the very first time. Bathymetric, sidescan sonar, and seismic profiling datasets, all integrated with real-time kinematic (RTK) positioning, were analyzed for a realistic evaluation of the storage capacity loss. Approximately 18.2 × 106 m3 of lacustrine sediments derived through physical wedge-type deposition process and ~ 800,000 m3 of material produced by slope failures have covered the bottom since reservoir commissioning in 1981. This configures an average storage capacity loss of ~ 0.07% per year, which, however, is one of the lowest rates worldwide. Moreover, the 108-m-deep reservoir basin can presently accommodate a maximum active water volume of ~ 740 × 106 m3. The siltation pattern and sediment transport pathways in the reservoir are principally controlled by vigorous turbidity underflows, which deliver sediment mainly to the dam area (deposition thickness up to ~ 7 m) as well as to the pumping area (deposition thickness up to ~ 4 m) posing there a future risk; nevertheless, according to the predicted lake bathymetry, this risk will be negligible till 2045.

A chain of barrier islands in the Gulf of Mexico reduces storm and hurricane impacts along the Mississippi coast. Ship Island, one of the largest islands of this chain, was breached by hurricanes Camille and Katrina creating a 5.5 kilometer wide gap. US Army Corps of Engineers plans to restore the island nourishing 15 million cubic meters of sand. Extensive modeling studies were carried out to support the environmental impact assessment and to optimize design. The main objective of these studies was to determine the impact of the restored island on the environment. The possible increase of sedimentation rates in the adjacent navigation channel connecting a major port to the Gulf of Mexico was of particular interest. The Delft3D models, calibrated on measurements of waves, tidal levels and currents, were used to estimate the annual sediment transport rates. These models were subsequently applied to optimize the design of the closure of Camille Cut. The optimum construction sequence was established. Sediment losses from the fill, and the impact of turbidity plumes on the nearby sea grass fields were determined.