Search

Across the globe, governments are developing policies and strategies to reduce carbon emissions to address climate change. Monitoring the impact of governments' carbon reduction policies can significantly enhance our ability to combat climate change and meet emissions reduction targets. One promising area in this regard is the role of artificial intelligence (AI) in carbon reduction policy and strategy monitoring. While researchers have explored applications of AI on data from various sources, including sensors, satellites, and social media, to identify areas for carbon emissions reduction, AI applications in tracking the effect of governments' carbon reduction plans have been limited. This study presents an AI framework based on long short-term memory (LSTM) and statistical process control (SPC) for the monitoring of variations in carbon emissions, using UK annual CO2 emission (per capita) data, covering a period between 1750 and 2021. This paper used LSTM to develop a surrogate model for the UK's carbon emissions characteristics and behaviours. As observed in our experiments, LSTM has better predictive abilities than ARIMA, Exponential Smoothing and feedforward artificial neural networks (ANN) in predicting CO2 emissions on a yearly prediction horizon. Using the deviation of the recorded emission data from the surrogate process, the variations and trends in these behaviours are then analysed using SPC, specifically Shewhart individual/moving range control charts. The result shows several assignable variations between the mid-1990s and 2021, which correlate with some notable UK government commitments to lower carbon emissions within this period. The framework presented in this paper can help identify periods of significant deviations from a country's normal CO2 emissions, which can potentially result from the government's carbon reduction policies or activities that can alter the amount of CO2 emissions. [ABSTRACT FROM AUTHOR]

Nowadays, the load monitoring system is an important element in smart buildings to reduce energy consumption. Nonintrusive load monitoring (NILM) is utilized to determine the power consumption of each appliance in smart homes. The main problem of NILM is how to separate each appliance's power from the signal of aggregated consumption. In this regard, this paper presents a combination between particle swarm optimization (PSO) and artificial neural networks (ANNs) to identify electrical appliances for demand‐side management. ANN is applied in NILM as a load identification task, and PSO is used to train the ANN algorithm. This combination enhances the NILM technique's accuracy, which is further verified by experiments on different datasets like Reference Energy Disaggregation Dataset, UK Domestic Appliance‐Level ElectricityUK‐DALE, and Indian data for Ambient Water and electricity Sensing. The high accuracy of the proposed algorithm is verified by comparisons with state of the art methods. Compared with other approaches, the total mean absolute error has decreased from 39.3566 to 18.607. Also, the normalized root mean square error (NRMSE) method has been used to compare the measured and predicted results. The NRMSE is in the range of 1.719%–16.514%, which means perfect consistency. This demonstrates the effectiveness of the proposed approach for home energy management. Furthermore, customer behavior has been studied, considering energy costs during day hours. [ABSTRACT FROM AUTHOR]

Introduction: Postoperative complications affect up to 15% of surgical patients constituting a major part of the overall disease burden in a modern healthcare system. While several surgical risk calculators have been developed, none have so far been shown to decrease the associated mortality and morbidity. Combining deep neural networks and genomics with the already established clinical predictors may hold promise for improvement. Methods: The UK Biobank was utilized to build linear and deep learning models for the prediction of surgery relevant outcomes. An initial GWAS for the relevant outcomes was initially conducted to select the Single Nucleotide Polymorphisms for inclusion in the models. Model performance was assessed with Receiver Operator Characteristics of the Area Under the Curve and optimum precision and recall. Feature importance was assessed with SHapley Additive exPlanations. Results: Models were generated for atrial fibrillation, venous thromboembolism and pneumonia as genetics only, clinical features only and a combined model. For venous thromboembolism, the ROC-AUCs were 60.1% [59.6%-60.4%], 63.4% [63.2%-63.4%] and 66.6% [66.2%-66.9%] for the linear models and 51.5% [49.4%-53.4%], 63.2% [61.2%-65.0%] and 62.6% [60.7%-64.5%] for the deep learning SNP, clinical and combined models, respectively. For atrial fibrillation, the ROC-AUCs were 60.3% [60.0%-60.4%], 78.7% [78.7%-78.7%] and 80.0% [79.9%-80.0%] for the linear models and 59.4% [58.2%-60.9%], 78.8% [77.8%-79.8%] and 79.8% [78.8%-80.9%] for the deep learning SNP, clinical and combined models, respectively. For pneumonia, the ROC-AUCs were 50.1% [49.6%-50.6%], 69.2% [69.1%-69.2%] and 68.4% [68.0%-68.5%] for the linear models and 51.0% [49.7%-52.4%], 69.7% [.5%-70.8%] and 69.7% [68.6%-70.8%] for the deep learning SNP, clinical and combined models, respectively. Conclusion: In this report we presented linear and deep learning predictive models for surgery relevant outcomes. Overall, predictability was similar between linear and deep learning models and inclusion of genetics seemed to improve accuracy. [ABSTRACT FROM AUTHOR]

A variant of membrane computing models called Spiking Neural P systems (SNP systems) closely mimics the structure and behavior of biological neurons. As third-generation neural networks, SNP systems have flexible architectures allowing the design of bio-inspired machine learning algorithms. This paper proposes Modular Spiking Neural P (MSNP) systems to solve image classification problems, a novel SNP system to be applied in scenarios where hundreds or even thousands of different classes are considered. A main issue to face in such situations is related to the structural complexity of the network. MSNP systems devised in this work allow to approach the general classification problem by dividing it in smaller parts, that are then faced by single entities of the network. As a benchmark dataset, the Oxford Flowers 102 dataset is considered, consisting of more than 8000 pictures of flowers belonging to the 102 species commonly found in the UK. These classes sometimes present large variations within them, may be also very similar to one another, and different images of the same subject may differ a lot. The work describes the architecture of the MSNP system, based on modules focusing on a specific class, their training phase, and the evaluation of the model both concerning result accuracy as well as energy consumption. Experimental results on image classification problems show that the model achieves good results, but is strongly connected to image quality, mainly depending on the frequency of images, remarkable changes of pose, images not centered, and subject mostly not shown. [ABSTRACT FROM AUTHOR]

Rainfall-runoff (R-R) modelling is used to study the runoff generation of a catchment. The quantity or rate of change measure of the hydrological variable, called runoff, is important for environmental scientists to accomplish water-related planning and design. This paper proposes (i) an integrated model namely EO-ELM (an integration of equilibrium optimizer (EO) and extreme learning machine (ELM)) and (ii) a deep neural network (DNN) for one day-ahead R-R modelling. The proposed R-R models are validated at two different benchmark stations of the catchments, namely river Teifi at Glanteifi and river Fal at Tregony in the UK. Firstly, a partial autocorrelation function (PACF) is used for optimal number of lag inputs to deploy the proposed models. Six other well-known machine learning models, called ELM, kernel ELM (KELM), and particle swarm optimization-based ELM (PSO-ELM), support vector regression (SVR), artificial neural network (ANN) and gradient boosting machine (GBM) are utilized to validate the two proposed models in terms of prediction efficiency. Furthermore, to increase the performance of the proposed models, paper utilizes a discrete wavelet-based data pre-processing technique is applied in rainfall and runoff data. The performance of wavelet-based EO-ELM and DNN are compared with wavelet-based ELM (WELM), KELM (WKELM), PSO-ELM (WPSO-ELM), SVR (WSVR), ANN (WANN) and GBM (WGBM). An uncertainty analysis and two-tailed t-test are carried out to ensure the trustworthiness and efficacy of the proposed models. The experimental results for two different time series datasets show that the EO-ELM performs better in an optimal number of lags than the others. In the case of wavelet-based daily R-R modelling, proposed models performed better and showed robustness compared to other models used. Therefore, this paper shows the efficient applicability of EO-ELM and DNN in R-R modelling that may be used in the hydrological modelling field. [ABSTRACT FROM AUTHOR]

Numerous Artificial Intelligence (AI) solutions are available for achieving thermal comfort. They were either trained with limited datasets or using personalized training with limited field studies. This work assessed the model that used the ASHRAE multiple databases as the shallow supervised learning dataset for an Artificial Neural Network (ANN) based controller suitable for the residential dwellings' node. The learning accuracy can be increased to 96.1%. This paper presented the field studies to show the model performances for the common UK dwellings: the prior 1970s, the new, modular, refurbished, and the use of new materials to improve indoor thermal performance. The result shows that the model was able to perform in different environments and able to acknowledge adaptive human comfort. This was shown by the ability to represent 98.90% of the ASHRAE Standard 55 data, 6.06% improvement from the previous research. As a result, the broader comfort zone acknowledgement can lead to energy saving whilst maintaining comfort by the possibility of lowering the temperature set point. This study also proves that further energy savings can be acquired from the occupants' presence, scheduling, and activities. These factors can increase the comfort probability to more than 10%. [Display omitted] • This paper addresses the gap between the physiology and the psychology thermal comfort approach, dominated by AI solutions. • The work shows a wider comfort zone which has been identified to become progressively narrower over the past several decades. • The field studies represent major UK-dwelling cases that weren't addressed in the previous Artificial Intelligence approach. • The occupant presence and scheduling can contribute to more than a 10% increase in comfort which impacts energy saving. • This work highlights the possibility of achieving indoor thermal comfort with less energy for more sustainable dwellings. [ABSTRACT FROM AUTHOR]

In recent years, the utility of polygenic risk scores (PRS) in forecasting disease susceptibility from genome-wide association studies (GWAS) results has been widely recognised. Yet, these models face limitations due to overfitting and the potential overestimation of effect sizes in correlated variants. To surmount these obstacles, we devised the Stacked Neural Network Polygenic Risk Score (SNPRS). This novel approach synthesises outputs from multiple neural network models, each calibrated using genetic variants chosen based on diverse p-value thresholds. By doing so, SNPRS captures a broader array of genetic variants, enabling a more nuanced interpretation of the combined effects of these variants. We assessed the efficacy of SNPRS using the UK Biobank data, focusing on the genetic risks associated with breast and prostate cancers, as well as quantitative traits like height and BMI. We also extended our analysis to the Korea Genome and Epidemiology Study (KoGES) dataset. Impressively, our results indicate that SNPRS surpasses traditional PRS models and an isolated deep neural network in terms of accuracy, highlighting its promise in refining the efficacy and relevance of PRS in genetic studies. [ABSTRACT FROM AUTHOR]

There are global efforts to deploy Electric Vehicles (EVs) because of the role they promise to play in energy transition. These efforts underscore the e-mobility paradigm, representing an interplay between renewable energy resources, smart technologies, and networked transportation. However, there are concerns that these initiatives could burden the electricity grid due to increased demand. Hence, the need for accurate short-term load forecasting is pivotal for the efficient planning, operation, and control of the grid and associated power systems. This study presents robust models for forecasting half-hourly and hourly loads in the UK's power system. The work leverages machine learning techniques such as Support Vector Regression (SVR), Artificial Neural Networks (ANN), and Gaussian Process Regression (GPR) to develop robust prediction models using the net imports dataset from 2010 to 2020. The models were evaluated based on metrics like Root Mean Square Error (RMSE), Mean Absolute Prediction Error (MAPE), Mean Absolute Deviation (MAD), and the Correlation of Determination (R2). For half-hourly forecasts, SVR performed best with an R-value of 99.85%, followed closely by GPR and ANN. But, for hourly forecasts, ANN led with an R-value of 99.71%. The findings affirm the reliability and precision of machine learning methods in short-term load forecasting, particularly highlighting the superior accuracy of the SVR model for half-hourly forecasts and the ANN model for hourly forecasts. [ABSTRACT FROM AUTHOR]

Wearable inertial measurement units (IMUs) are being used to quantify gait characteristics that are associated with increased fall risk, but the current limitation is the lack of contextual information that would clarify IMU data. Use of wearable video-based cameras would provide a comprehensive understanding of an individual's habitual fall risk, adding context to clarify abnormal IMU data. Generally, there is taboo when suggesting the use of wearable cameras to capture real-world video, clinical and patient apprehension due to ethical and privacy concerns. This perspective proposes that routine use of wearable cameras could be realized within digital medicine through AI-based computer vision models to obfuscate/blur/shade sensitive information while preserving helpful contextual information for a comprehensive patient assessment. Specifically, no person sees the raw video data to understand context, rather AI interprets the raw video data first to blur sensitive objects and uphold privacy. That may be more routinely achieved than one imagines as contemporary resources exist. Here, to showcase/display the potential an exemplar model is suggested via off-the-shelf methods to detect and blur sensitive objects (e.g., people) with an accuracy of 88%. Here, the benefit of the proposed approach includes a more comprehensive understanding of an individual's free-living fall risk (from free-living IMU-based gait) without compromising privacy. More generally, the video and AI approach could be used beyond fall risk to better inform habitual experiences and challenges across a range of clinical cohorts. Medicine is becoming more receptive to wearables as a helpful toolbox, camera-based devices should be plausible instruments. [ABSTRACT FROM AUTHOR]

The urban morphology is characterised by self-organisation where interactions of multiple agents produce emerging patterns on the urban form. Port-urban relationship added to the complexity of port cities' urban form. Most urban cellular automata (CA) models simulate land-use evolution through transition rules representing multi-factored local interactions. However, calibration of CA-based urban land use and transport interaction (LUTI) models often utilise manual methods due to complexity of the process. This limits insights on urban interactions to a few explored settlements and prevents applications for planning and assessment of transport policies in other contexts. This paper, therefore, addresses three main points. The paper (i) demonstrates an improved method for the calibration of CA-based LUTI models, (ii) contributes to a better understanding of the urban dynamics in port city systems by quantifying generalizable interactions from a wide range of port-urban settlements, and (iii) illustrates how the use of these interactions in a simulation model can allow long-term impact predictions of planning interventions. These were done by formulating a model in a similar structure as a neural network model to enable automatic calibration using an application of the gradient-descent algorithm. The model was then used to quantify the dynamics between land-use, geographic, and transport factors in 46 port-based and 10 non-port settlements across Great Britain, thus enabling cross-sectional analysis. Cluster analysis of the calibrated interactions in the study areas was conducted to examine the variations of these interactions. This produced two main groups. In the first group, consisting larger settlements, connections between ports and other urban activities were weaker than in the second group which consisted of smaller port-settlements. Overall, the findings of the research are consistent with existing evidence in the port-cities literature but go further in quantifying the interaction between urban agents within port-urban systems of various sizes and types. These quantified interactions will enable planners to better predict the longer-term consequences of their interventions. • This paper improved calibration process of urban model using optimization method from machine learning • The improved process allowed examination of wide range of port cities to counter the current trend of case-specific studies • Quantified interactions from wide range of port cities provide insights of the different land use behaviour in different types of port cities • Port-urban interactions in smaller urban areas with port are stronger thn in most other port cities • Interactions quantified in the study can be used in simulation to predict future port city urban form [ABSTRACT FROM AUTHOR]

As the access to consumption data available in household smart meters is now very common in several developed countries, this kind of information is assuming a providential role for different players in the energy sector. The proposed study was applied to data available from the Smart Meter Energy Consumption Data in the London Households dataset, provided by UK Power Networks, containing half-hourly readings from an original sample of 5567 households (71 households were hereby carefully selected after a justified filtering process). The main aim is to forecast the day—ahead load profile, based only on previous load values and some auxiliary variables. During this research different forecasting models are applied, tested and compared to allow comprehensive analyses integrating forecasting accuracy, processing times and the interpretation of the most influential features in each case. The selected models are based on Multivariate Adaptive Regression Splines, Random Forests and Artificial Neural Networks, and the accuracies resulted from each model are compared and confronted with a baseline (Naïve model). The different forecasting approaches being evaluated have been revealed to be effective, ensuring a mean reduction of 15% in Mean Absolute Error when compared to the baseline. Artificial Neural Networks proved to be the most accurate model for a major part of the residential consumers. [ABSTRACT FROM AUTHOR]

Motivation Medical images can provide rich information about diseases and their biology. However, investigating their association with genetic variation requires non-standard methods. We propose transferGWAS , a novel approach to perform genome-wide association studies directly on full medical images. First, we learn semantically meaningful representations of the images based on a transfer learning task, during which a deep neural network is trained on independent but similar data. Then, we perform genetic association tests with these representations. Results We validate the type I error rates and power of transferGWAS in simulation studies of synthetic images. Then we apply transferGWAS in a genome-wide association study of retinal fundus images from the UK Biobank. This first-of-a-kind GWAS of full imaging data yielded 60 genomic regions associated with retinal fundus images, of which 7 are novel candidate loci for eye-related traits and diseases. Availability and implementation Our method is implemented in Python and available at https://github.com/mkirchler/transferGWAS/. Supplementary information Supplementary data are available at Bioinformatics online. [ABSTRACT FROM AUTHOR]

(1) Background: Coronavirus disease 2019 (COVID-19) is a dominant, rapidly spreading respiratory disease. However, the factors influencing COVID-19 mortality still have not been confirmed. The pathogenesis of COVID-19 is unknown, and relevant mortality predictors are lacking. This study aimed to investigate COVID-19 mortality in patients with pre-existing health conditions and to examine the association between COVID-19 mortality and other morbidities. (2) Methods: De-identified data from 113,882, including 14,877 COVID-19 patients, were collected from the UK Biobank. Different types of data, such as disease history and lifestyle factors, from the COVID-19 patients, were input into the following three machine learning models: Deep Neural Networks (DNN), Random Forest Classifier (RF), eXtreme Gradient Boosting classifier (XGB) and Support Vector Machine (SVM). The Area under the Curve (AUC) was used to measure the experiment result as a performance metric. (3) Results: Data from 14,876 COVID-19 patients were input into the machine learning model for risk-level mortality prediction, with the predicted risk level ranging from 0 to 1. Of the three models used in the experiment, the RF model achieved the best result, with an AUC value of 0.86 (95% CI 0.84–0.88). (4) Conclusions: A risk-level prediction model for COVID-19 mortality was developed. Age, lifestyle, illness, income, and family disease history were identified as important predictors of COVID-19 mortality. The identified factors were related to COVID-19 mortality. [ABSTRACT FROM AUTHOR]

A major goal of neuroimaging studies is to develop predictive models to analyze the relationship between whole brain functional connectivity patterns and behavioural traits. However, there is no single widely-accepted standard pipeline for analyzing functional connectivity. The common procedure for designing functional connectivity based predictive models entails three main steps: parcellating the brain, estimating the interaction between defined parcels, and lastly, using these integrated associations between brain parcels as features fed to a classifier for predicting non-imaging variables e.g., behavioural traits, demographics, emotional measures, etc. There are also additional considerations when using correlation-based measures of functional connectivity, resulting in three supplementary steps: utilising Riemannian geometry tangent space parameterization to preserve the geometry of functional connectivity; penalizing the connectivity estimates with shrinkage approaches to handle challenges related to short time-series (and noisy) data; and removing confounding variables from brain-behaviour data. These six steps are contingent on each-other, and to optimise a general framework one should ideally examine these various methods simultaneously. In this paper, we investigated strengths and short-comings, both independently and jointly, of the following measures: parcellation techniques of four kinds (categorized further depending upon number of parcels), five measures of functional connectivity, the decision of staying in the ambient space of connectivity matrices or in tangent space, the choice of applying shrinkage estimators, six alternative techniques for handling confounds and finally four novel classifiers/predictors. For performance evaluation, we have selected two of the largest datasets, UK Biobank and the Human Connectome Project resting state fMRI data, and have run more than 9000 different pipeline variants on a total of ∼ 14000 individuals to determine the optimum pipeline. For independent performance validation, we have run some best-performing pipeline variants on ABIDE and ACPI datasets (∼ 1000 subjects) to evaluate the generalisability of proposed network modelling methods. Image 1 [ABSTRACT FROM AUTHOR]

Motivation Implicit solvent models play an important role in describing the thermodynamics and the dynamics of biomolecular systems. Key to an efficient use of these models is the computation of generalized Born (GB) radii, which is accomplished by algorithms based on the electrostatics of inhomogeneous dielectric media. The speed and accuracy of such computations are still an issue especially for their intensive use in classical molecular dynamics. Here, we propose an alternative approach that encodes the physics of the phenomena and the chemical structure of the molecules in model parameters which are learned from examples. Results GB radii have been computed using (i) a linear model and (ii) a neural network. The input is the element, the histogram of counts of neighbouring atoms, divided by atom element, within 16 Å. Linear models are ca. 8 times faster than the most widely used reference method and the accuracy is higher with correlation coefficient with the inverse of 'perfect' GB radii of 0.94 versus 0.80 of the reference method. Neural networks further improve the accuracy of the predictions with correlation coefficient with 'perfect' GB radii of 0.97 and ca. 20% smaller root mean square error. Availability and implementation We provide a C program implementing the computation using the linear model, including the coefficients appropriate for the set of Bondi radii, as Supplementary Material. We also provide a Python implementation of the neural network model with parameter and example files in the Supplementary Material as well. Supplementary information Supplementary data are available at Bioinformatics online. [ABSTRACT FROM AUTHOR]

Background. Fasciola hepatica and F. gigantica cause fascioliasis in both humans and livestock. Some adult specimens of Fasciola sp. referred to as "intermediate forms" based on their genetic traits, are also frequently reported. Simple morphological criteria are unreliable for their specific identification. In previous studies, promising phenotypic identification scores were obtained using morphometrics based on linear measurements (distances, angles, curves) between anatomical features. Such an approach is commonly termed "traditional" morphometrics, as opposed to "modern" morphometrics, which is based on the coordinates of anatomical points. Methods. Here, we explored the possible improvements that modern methods of morphometrics, including landmark-based and outline-based approaches, could bring to solving the problem of the non-molecular identification of these parasites. F. gigantica and Fasciola intermediate forms suitable for morphometric characterization were selected from Thai strains following their molecular identification. Specimens of F. hepatica were obtained from the Liverpool School of Tropical Medicine (UK). Using these three taxa, we tested the taxonomic signal embedded in traditional linear measurements versus the coordinates of anatomical points (landmark- and outlinebased approaches). Various statistical techniques of validated reclassification were used, based on either the shortest Mahalanobis distance, the maximum likelihood, or the artificial neural network method. Results. Our results revealed that both traditional and modern morphometric approaches can help in the morphological identification of Fasciola sp. We showed that the accuracy of the traditional approach could be improved by selecting a subset of characters among the most contributive ones. The influence of size on discrimination by shape was much more important in traditional than in modern analyses. In our study, the modern approach provided different results according to the type of data: satisfactory when using pseudolandmarks (outlines), less satisfactory when using landmarks. The different reclassification methods provided approximately similar scores, with a special mention to the neural network, which allowed improvements in accuracy by combining data from both morphometric approaches. Conclusion. We conclude that morphometrics, whether traditional or modern, represent a valuable tool to assist in Fasciola species recognition. The general level of accuracy is comparable among the various methods, but their demands on skills and time differ. Based on the outline method, our study could provide the first description of the shape differences between species, highlighting the more globular contours of the intermediate forms. [ABSTRACT FROM AUTHOR]

Nicotine consumption is considered a major health problem, where many of those who wish to quit smoking relapse. The problem is that overtime smoking as behaviour is changing into a habit, in which it is connected to internal (e.g., nicotine level, craving) and external (action, time, location) triggers. Smoking cessation apps have proved their efficiency to support smoking who wish to quit smoking. However, still, these applications suffer from several drawbacks, where they are highly relying on the user to initiate the intervention by submitting the factor the causes the urge to smoke. This research describes the creation of a combined Control Theory and deep learning model that can learn the smoker's daily routine and predict smoking events. The model's structure combines a Control Theory model of smoking with a 1D-CNN classifier to adapt to individual differences between smokers and predict smoking events based on motion and geolocation values collected using a mobile device. Data were collected from 5 participants in the UK, and analysed and tested on 3 different machine learning model (SVM, Decision tree, and 1D-CNN), 1D-CNN has proved it's efficiency over the three methods with average overall accuracy 86.6%. The average MSE of forecasting the nicotine level was (0.04) in the weekdays, and (0.03) in the weekends. The model has proved its ability to predict the smoking event accurately when the participant is well engaged with the app. [ABSTRACT FROM AUTHOR]

We develop a method based on computer vision and a hierarchical multilevel model to derive an Urban Street Tree Vegetation Index which aims to quantify the amount of vegetation visible from the point of view of a pedestrian. Our approach unfolds in two steps. First, areas of vegetation are detected within street-level imagery using a state-of-the-art deep neural network model. Second, information is combined from several images to derive an aggregated indicator at the area level using a hierarchical multilevel model. The comparative performance of our proposed approach is demonstrated against a widely used image segmentation technique based on a pre-labelled dataset. The approach is deployed to a real-world scenario for the city of Cardiff, Wales, using Google Street View imagery. Based on more than 200,000 street-level images, an urban tree street-level indicator is derived to measure the spatial distribution of tree cover, accounting for the presence of obstructing objects present in images at the Lower Layer Super Output Area (LSOA) level, corresponding to the most commonly used administrative areas for policy-making in the United Kingdom. The results show a high degree of correspondence between our tree street-level score and aerial tree cover estimates. They also evidence more accurate estimates at a pedestrian perspective from our tree score by more appropriately capturing tree cover in areas with large burial, woodland, formal open and informal open spaces where shallow trees are abundant, in high density residential areas with backyard trees, and along street networks with high density of high trees. The proposed approach is scalable and automatable. It can be applied to cities across the world and provides robust estimates of urban trees to advance our understanding of the link between mental health, well-being, green space and air pollution. [ABSTRACT FROM AUTHOR]