Search

The ricochet phenomenon has been studied worldwide for a long time in consideration of its significance in ballistics. A ricochet projectile has proven to be worthless to its launcher, as warheads fail to penetrate the interior of targets and strike the facilities and personnel of enemies effectively. A large portion of related research has been dedicated to avoiding ricocheting, which mainly focuses on improving the penetration ability of a projectile in order to obtain a better penetration effect, while investigations on the proactive protection of key targets from damage caused by a ricochet projectile are minor. This study analytically explores the ricochet range of a projectile obliquely penetrating a thick steel target. Firstly, the moment of momentum equation of the ricochet projectile based on theoretical mechanics is utilised to analytically calculate its trajectory, where a mathematical model of a two-stage ricochet impacting is established through the geometrical analysis of the ricochet process for determining the ricochet range of a projectile and the size of the bulletproof structure. Then, impact experiments of a projectile obliquely penetrating thick steel targets at different striking velocities and inclination angles are carried out, and the influences of the striking velocity and angle of attack on the damage pattern, area and penetration depth are discussed to identify the ricochet phenomenon. Moreover, the deflection angle of the ricochet projectile is computed, which is compared with the experimental measurements in order to validate the accuracy of this proposed model. This proposed research may promote security protection during live-firing training and provide a theoretical foundation for the optimisation of purposeful protection. [ABSTRACT FROM AUTHOR]

This research deals with the experimental and numerical investigation of ballistic protection provided by a combination of perforated and base armour plates. A 7.62 mm armour piercing projectile was used during the experimentation to determine the ballistic response of an aluminum base armour plate and a combination of steel perforated and aluminum base armour plate. The armour piercing projectiles were able to penetrate the base armour plate while the combination of perforated and base armour plates was able to stop the penetration of the armour piercing projectile. A finite element method based numerical model was developed to investigate the defeating phenomenon of perforated and base armour plate combination. The brittle fracture caused by the bending of the projectile core due to the asymmetric impact was predicted and the resulting fragments of the projectile were unable to penetrate the base armour plate. Craters were formed on the surface of the base armour plate from the impact of the projectile fragments. The numerical model was able to predict the hole growth and penetration of projectile when only the base armour plate was impacted by the projectile. [ABSTRACT FROM AUTHOR]

• Two field tests on concrete targets subjected to a projectile penetration followed by charge explosion were conducted. • The failure mode and stress waves in concrete were experimentally obtained. • Two-step numerical models based on the Kong-Fang concrete material model and SPG method were developed and validated. • The influences of projectile penetration on destructive effects caused by following charge explosion were clarified. The earth penetration weapons (EPWs) usually penetrate into protective structures firstly, and then detonate the charge to induce high-intensity blast stress waves to cause further damage. Existing investigations on the destructive effect caused by the following charge explosion after penetration of EPWs are very limited. To clarify the combined destructive effect in concrete material caused by an EPW, an experimental and numerical investigation on failure mode and stress wave propagation in concrete target subjected to a projectile penetration followed by charge explosion was conducted in the present study. Firstly, two field tests on high strength fiber-reinforced concrete targets subjected to a projectile penetration followed by charge explosion were conducted, in which the failure and blast waves in concrete targets were comprehensively obtained. Then two-step numerical models based on the Kong-Fang concrete material model and SPG method were developed and validated against the experimental data. Finally, based on the validated numerical models, the influences of projectile penetration on the destructive effect caused by following charge explosion were analyzed. The numerical results demonstrated that the damage caused by projectile penetration has significant influences on the final failure mode and stress wave propagation in concrete targets. The research results can provide an important reference for the design of protective structure against EPWs. [ABSTRACT FROM AUTHOR]

Molecular dynamics simulations of the ballistic Taylor test are used to explore correlation between the largest fragment mass and the impact energy of a projectile as well as a set of selected state variables. Flat-ended, monocrystalline, nanoscale bars collide with a rigid wall with striking velocities ranging from 0.27 km/s to 60 km/s. The investigation emphasis is on two border regions of the emerging nonlinear phenomenological model identified with two transitions: the damage-fragmentation transition and the shattering transition. In between these two nonlinear regions, the maximum fragment mass is largely inversely proportional to the impact energy, and the maximum values of the pressure, temperature, and the square of the effective strain. A reverse-sigmoid phenomenological model is proposed to capture the unifying features of this nonlinear and saturable dependence. A crystallographic orientation dependence of the damage-fragmentation transition parameters is investigated. [ABSTRACT FROM AUTHOR]

The penetration of rigid projectiles in polycarbonate (PC) targets is explored through deep indentation tests with conical-nosed indenters and ballistic penetration results for armor piercing 7.62 mm projectiles. We found that the resistance to penetration in both sets of experiments is practically the same, which means that the rate sensitivity of PC does not play a significant role in its resistance to penetration. We account for this observation by including the pressure dependence of the elastic constants and the strength of PC in its constitutive equation, which we implemented in numerical simulations. This pressure-dependent constitutive relation resulted in good agreements between simulation results and experimental data for both penetration depths and residual velocities of armor piercing projectiles impacting PC targets. [ABSTRACT FROM AUTHOR]

Ballistic performance of an armour steel at different tempering conditions against a tungsten heavy alloy long rod kinetic energy projectile has been investigated. The ballistic performance was found to increase with decreasing tempering temperature but the performance increments were not proportional to the strength increase caused by the tempering. Both target and projectile underwent fragmentation at the penetration interface in all the three targets. Apart from the strength target material deformation behaviour also showed considerable influence on ballistic performance. The ballistic performance appears to increase with decreasing toughness for a given strength. [ABSTRACT FROM AUTHOR]

The database for depth of penetration by projectiles into semi-infinite targets is quite extensive. The objective is to use the experimental semi-infinite penetration data to predict finite-thickness target effects. Similitude considerations are used to represent penetration response as a function of a normalized impact velocity, which is the ratio of the penetration pressure to the target strength. Then, a least-squares regression analysis methodology was applied to the normalized experimental data to provide an analytic expression for the normalized depth of penetration as a function of the normalized impact velocity over a very large velocity range, typically a few hundred meters per second to over 3500 m/s. We use the analytic expression, along with some simplifying assumptions, to estimate ballistic limit thickness T 50 and/or the ballistic limit velocity V 50 . If a target is overmatched, i.e., perforated by the projectile, an estimate is also made for the projectile residual velocity and residual length. The experimental data on which the regression fit is based consists of L / D 10 projectiles, so a procedure is also developed to account for different projectile aspect ratios. A series of examples are provided to demonstrate the utility and accuracy of the approach. [ABSTRACT FROM AUTHOR]

Polymer composites comprising ultra-high molecular weight polyethylene (UHWMPE) fibers in a compliant matrix are now widely used in ballistic applications with varying levels of success. This is primarily due to a poor understanding of the mechanics of penetration of these composites in ballistic protection systems. In this study, we report experimental observations of the penetration mechanisms in four model systems impacted by a 12.7 mm diameter spherical steel projectile. The four model targets designed to highlight different penetration mechanisms in Dyneema ® UHWMPE composites were: (i) a bare aluminum plate; (ii) the same plate fully encased in a 5.9 mm thick casing of Dyneema ® ; (iii) the fully encased plate with a portion of the Dyneema ® removed from the front face so that the projectile impacts directly the Al plate; and (iv) the fully encased plate with a portion of the Dyneema ® removed from the rear face so that the projectile can exit the Al plate without again interacting with the Dyneema ® . A combination of synchronized high speed photography with three cameras, together with post-test examination of the targets via X-ray tomography and optical microscopy was used to elucidate the deformation and perforation mechanisms. The measurements show that the ballistic resistance of these targets increases in the order: bare Al plate, rear face cutout target, fully encased target and front face cutout target. These findings are explained based on the following key findings: (a) the ballistic performance of Dyneema ® plates supported on a foundation is inferior to Dyneema ® plates supported along their edges; (b) the apparent ballistic resistance of Dyneema ® plates increases if the plates are given an initial velocity prior to the impact by the projectile, thereby reducing the relative velocity between the Dyneema ® plate and projectile; and (c) when the projectile is fragmented prior to impact, the spatially and temporally distributed loading enhances the ballistic resistance of the Dyneema ® . The simple model targets designed here have elucidated mechanisms by which Dyneema ® functions in multi-material structures. [ABSTRACT FROM AUTHOR]

• High hardness steel (HHS) sheet with UHMWPE composite backing were tested against a hardened steel core projectile. • The projectile core was eroded by the HHS sheet and stopped in UHMWPE composite. • It is observed that only a core eroded to a certain length and weight by armor system can be defeated. • In numerical modeling core failure strain was determined from the residual weight of cores. • The numerical model can be used to evolve armor design. Thin high hardness steel sheets can be an alternative to expensive ceramic armor systems designed to defeat hardened core projectiles. A thin high hardness steel sheet backed with UHMWPE fiber-reinforced composite was ballistically tested against a 7.62 × 39 mm hardened steel core projectile in a single-stage gas gun. Thin steel sheets of 530 BHN hardness were adhesively bonded with UHMWPE fiber-reinforced composite to fabricate armor plates. Armor plates were able to defeat the projectile showing considerable potential. Tensile strength of steel sheet and UHMWPE-fiber reinforced ply was also determined. A detailed numerical simulation of the impact event was also performed to understand the phenomenon of defeat and penetration in greater detail. The numerical model was calibrated from the recovered projectile's core after the ballistic test. [ABSTRACT FROM AUTHOR]