Search

Potassium chloride (KCl) nanoparticles were synthesized by ball milling technique with different milling time. The effect of milling time on structural and optical properties was investigated. The structural properties of the purchased samples are characterized by Raman spectroscopy, scanning electron microscope and X-ray diffraction techniques. The Raman spectroscopy of the KCl hints at an excellent alloying behavior of those compounds and a preferred crystal structure for certain composition. The optical band is calculated by analyzing the spectral behavior of the absorption coefficient in the absorption region which revealed direct transitions. The value optical band increases (4.02–5.11 eV) with increasing milling time (0–15 h) due to quantum confinement after the ball milling process. The refractive and absorption indices were calculated for all samples. The model of Wemple–DiDomenico was used to calculate the dispersion parameters. The nonlinear susceptibility of the third order and the nonlinear refractive index were calculated by linear optical parameters using the generalized Miller rule. Mechanical milling for different milling times (0, 5, 10 and 15 h) by a planetary ball mill with zirconium oxide balls has been carried out for milling KCl. The images of as-purchased KCl have regular uniformly grains distributed like cubic particles with size of around 10 μm. By increasing the milling time to 15 h, these individual regular shapes form a smaller reasonably dense having a size less than 500 nm. [ABSTRACT FROM AUTHOR]

Fe3O4 nanoparticles coating with poly dimethyl diallyl ammonium chloride (Fe3O4/PDDA) as novel magnetic adsorbents were synthesized with chemical co-precipitation method to study the removal capacity of organic phosphonates from aqueous solution. The as-prepared magnetic absorbents were characterized for the morphology, material structure and surface properties by SEM, TEM, FT-IR, XRD, TGA and BET. HEDP was employed as a common organic phosphonate to investigate the adsorption performance. Substantial quaternary ammonium groups existing on the surface of Fe3O4/PDDA could enhance the absorption of HEDP with electrostatic attraction. In the optimum condition (4 mg adsorbent dosage, 11.0 pH, 36 mg/L HEDP solution and 120 min adsorption time), the maximum adsorption capacity ( q m ) for HEDP could reach 254.86 mg/g. The kinetic study revealed that the adsorption process followed the pseudo-second-order model. The adsorption isotherm fitted closely to the Freundlich model. The as-prepared magnetic adsorbents exhibited notable reusability in some cycles and were easily separated from the solution with the external magnetic field. These as-prepared Fe3O4/PDDA nanoparticles have the potential as an environmental-friendly adsorbent for organic phosphonates removal from waste-water. Fe3O4 nanoparticles modified with PDDA have been successfully fabricated by the chemical co-precipitation method. The PDDA on the surface of particles provided substantial quaternary ammonium groups which enhanced the absorption of HEDP from aqueous solutions with electrostatic attraction. These magnetic nanoparticles exhibited good reusability in several cycles. [ABSTRACT FROM AUTHOR]