Search

The geographical name of Monegros has traditionally been used to describe a high‐quality, dark‐coloured chert originating in a carbonate lacustrine environment, being one of the most important long‐distance tracers in south‐west Europe during prehistory. This chert type outcrops in the Monegros region, situated in the Ebro Basin (north‐eastern Iberia), but not only there, as cherts with the same descriptions are found in other regions, some far from the homonymous area. Nevertheless, prehistorians working on the characterization of lithic sources have frequently used the term 'Monegros' to define this chert, basing their attributions solely on macroscopic descriptions. These are not sufficient as they do not allow cherts from the Monegros region to be distinguished from cherts from other regions. In this study, the area where Monegros cherts outcrop was delimited and fieldwork was carried out to identify the origin of the geological formations and the preserved outcrops. The classic approach has proved to be insufficient for this purpose, so geochemical fingerprinting using energy‐dispersive X‐ray fluorescence (ED‐XRF) spectroscopy was performed. The results obtained after this first geochemical approach show that some differences can be found between the different formations in the Monegros region in terms of their major and minor components. [ABSTRACT FROM AUTHOR]

The middle Eocene Fulra Limestone Formation of the Kachchh Basin, western India was investigated to interpret depositional environments and sources of limestones based on facies analysis, mineralogy, and major, trace, and rare earth elements (REEs) geochemistry. Facies stacking pattern of the Fulra Limestone Formation exhibits an overall shallowing‐upward sedimentary succession developed in the middle to inner ramp to lagoonal set‐up. Staining of the thin sections and X‐ray diffraction patterns show dominance of calcite mineral. The CaO, ranging from 40.45% to 49.69%, is the dominant oxide among the major oxides followed by SiO2 (4.04–10.3%). The dominance of CaO over MgO suggests that the major mineral phase has been calcite and no dolomitization occurred during the deposition of the Fulra limestone. The low proportion of SiO2 and Al2O3 suggests low siliciclastic input during the precipitation of the Fulra limestone that is confirmed by the positive correlation of ∑REE with Al2O3, Fe2O3, Ni, Th, Sc, and Y and the negative correlation of SiO2, Al2O3, and Sr with CaO. The average value of REE contents in the Fulra Limestone Formation are lower (*16.02 ppm) than the average value of typical marine carbonates (*28 ppm). The Post‐Archean Australian Shale‐normalized REE + Y patterns of the Fulra limestone exhibit seawater like shale‐normalized REE + Y pattern, whereas slightly lower average value of Y/Ho ratio (34.60) than the typical seawater value (~44–74) suggests modification of the seawater, to some extent, by input of freshwater in a coastal environment. The REEs of the Fulra Limestone Formation have similarity with the carbonates of the Arabian Sea and/or shallow marine carbonates with exception of a few elements. It is envisaged from this study that the Fulra limestone was deposited in a shallow marine to coastal set‐up where mixing of the continental material in seawater was feasible. [ABSTRACT FROM AUTHOR]

The metasedimentary Lujiapuzi Formation crops out along the northeastern margin of the North China Craton, close to the Yan‐Liao Rift. The age and tectonic setting of the formation, and its relationship with the Yan‐Liao Rift are currently unclear. Here we present detrital zircon U‐Pb ages, and Hf isotopic and geochemical data for the Lujiapuzi Formation to constrain the timing of deposition, the provenance of the formation, and the regional stratigraphy relationship. Zircon U‐Pb dating constrains the timing of deposition of the Lujiapuzi Formation to younger than 1780 Ma, and indicates that most grains were sourced from the Longgang Block and the Paleoproterozoic Liao‐Ji Belt. Detailed field investigations and a correlation of the regional stratigraphy reveal that much of the Lujiapuzi Formation is equivalent to the Tuanshanzi Formation in the Yan‐Liao Rift; the lower section may represent the earliest sediments deposited within the Fanhe Basin. Based on these results and the findings of previous studies, we suggest that the base of the Changcheng System has an age of 1.80 Ga. Zircon Hf isotopic data indicate that the main period of crustal growth along the northeastern margin of the North China Craton occurred at 3.2–2.5 Ga, with a peak at 2.9–2.7 Ga. [ABSTRACT FROM AUTHOR]

A significant proportion of shale gas resources occurs in Lower Silurian Longmaxi Formation in southeast Sichuan Basin, South China, where commercial gas production has been achieved at Fuling Shale Gas Field. This study area is located adjacent to Fuling Jiaoshiba shale play. Elemental geochemistry regarding paleoenvironment aspects of lower Silurian Longmaxi shale gas is poorly understood. However, the samples in this study are representative, revealing the complete elemental geochemical characteristics of Longmaxi Shale. This research has analysed trace and rare earth elements of lower Silurian Longmaxi Shale and investigated the depositional environment, provenance, and tectonic settings when this type of shale formed. Sedimentary structures include horizontal lamination, massive lamination, and deformation structures that are well developed in black shale and grey silty shale of lower Silurian Longmaxi Formation. Gamma ray, total organic carbon, and pyrite contents are relatively higher in the lower part of the shale. The enrichment of sulfophile heavy metal elements (Cu, Zn, Pb, Mo, Ni) indicates that a reducing environment is common during the deposition of Longmaxi Formation. The concentration of rare earth elements is generally constant with relatively high concentration of light rare earth elements, stable concentration of heavy rare earth elements, and negative Eu anomalies. The sediments of Longmaxi Formation are derived primarily from the sedimentary rocks and granites in continental crust. The combination of trace and rare earth elements indicates that the tectonic settings of the provenance are continental island arc and active continental margin. [ABSTRACT FROM AUTHOR]

The North Qilian orogenic belt is the key in the exploration of the formation and assembly of Asia. The Early–Middle Devonian Xueshan Formation, which is deposited in the north area of North Qilian Orogenic Belt, is the most important for revealing the evolution basin–mountain transition of the North Qilian Belt. In order to reveal the tectonic evolution of the central orogenic belt in China and Paleozoic global plate reconstruction, it is necessary to perform provenance analysis of the Xueshan Formation. Eighteen samples were collected from Yumen and Yongchang profiles in the west of North Qilian Belt (WN), and 16 samples were obtained from Gulang and Jingtai profiles in the east of North Qilian Belt (EN). The compositions of clastic conglomerates and the sandstones suggested that felsic volcanic was the main source of the WN Xueshan Formation deposits and that the sedimentary and metamorphic rocks were the main source of the EN sediments. According to major geochemistry indexes, such as Al2O3/SiO2 ratio ranging from 0.08 to 0.37 and the chemical index of alteration less than 80, the source rocks were moderately weathered and of moderately matured. The samples from the EN were relatively enriched in Cr, Ni, Sc, and V elements and depleted in Hf element. However, those from the WN were enriched in Hf without the enrichment of Cr, Ni, Sc, or V. The samples from WN showed a strong negative Eu anomaly, but the samples from EN showed a weak negative Eu anomaly or a positive Eu anomaly. All the above geochemical characteristics suggested the prominent input of felsic clasts with granitic rocks into the WN. Meanwhile, the discrimination diagrams of trace elements implied that WN rocks were derived from continental island arc and that the EN rocks were derived from orogenic belt and the passive continental margin. The North China Plate subducted southwards and formed subduction‐related arc magmatism along the southern margin of the North Qilian Terrane during the Early–Middle Devonian. In conclusion, the WN is a fore‐arc basin, but EN is a foreland basin. [ABSTRACT FROM AUTHOR]

The East China Sea Shelf Basin (ECSSB) is an important tectonic unit of the western Pacific active continental margin. It is divided further into a series of sags and basement ridges. The Xihu Sag on the east margin of the ECSSB is an important hydrocarbon exploration area and contains significant petroleum resources. The Huagang Formation is the major reservoir in Xihu Sag, and its provenance has been the focus of debate at all times. The major and trace elements (including rare earth elements) compositions were analyzed for the Oligocene Huagang Formation sandstone and mudstone samples in the Xihu Sag. The provenance and tectonic setting of these clastic rocks are discussed. The Chemical Index of Alteration value and A–CN–K diagrams suggest low to moderate weathering in the source areas of the Huagang Formation. The mudstones have lower index of compositional variation values (<1), indicating that the mudstone samples are compositionally mature, whereas the index of compositional variation values for the sandstone samples (0.59 to 1.87) indicate that the sandstones are compositionally immature and mature. The major and trace element composition and ratios of the clastic rock samples indicate that mudstones are mainly from Late Mesozoic igneous rocks in SE China, which is dominated by the acidic volcanic rock. The provenance of sandstones is from two different directions, the Central Uplift Group of ECSSB and the Taiwan–Sinzi Fold Belt with more mafic volcanic rock. Based on the geochemical analysis of the clastic rock samples, the tectonic setting of Xihu Sag was Japanese‐type continental margin during the Huagang Formation deposition time (Oligocene). [ABSTRACT FROM AUTHOR]

We document the discovery of the first granular iron formation ( GIF) of Archaean age and present textural and geochemical results that suggest these formed through microbial iron oxidation. The GIF occurs in the Nconga Formation of the ca. 3.0-2.8 Ga Pongola Supergroup in South Africa and Swaziland. It is interbedded with oxide and silicate facies micritic iron formation ( MIF). There is a strong textural control on iron mineralization in the GIF not observed in the associated MIF. The GIF is marked by oncoids with chert cores surrounded by magnetite and calcite rims. These rims show laminated domal textures, similar in appearance to microstromatolites. The GIF is enriched in silica and depleted in Fe relative to the interbedded MIF. Very low Al and trace element contents in the GIF indicate that chemically precipitated chert was reworked above wave base into granules in an environment devoid of siliciclastic input. Microbially mediated iron precipitation resulted in the formation of irregular, domal rims around the chert granules. During storm surges, oncoids were transported and deposited in deeper water environments. Textural features, along with positive δ56Fe values in magnetite, suggest that iron precipitation occurred through incomplete oxidation of hydrothermal Fe2+ by iron-oxidizing bacteria. The initial Fe3+-oxyhydroxide precipitates were then post-depositionally transformed to magnetite. Comparison of the Fe isotope compositions of the oncoidal GIF with those reported for the interbedded deeper water iron formation ( IF) illustrates that the Fe2+ pathways and sources for these units were distinct. It is suggested that the deeper water IF was deposited from the evolved margin of a buoyant Fe2+aq-rich hydrothermal plume distal to its source. In contrast, oncolitic magnetite rims of chert granules were sourced from ambient Fe2+aq-depleted shallow ocean water beyond the plume. [ABSTRACT FROM AUTHOR]

Using analyses of the lithology, sequences, paleoenvironment, and tectonic setting, the depositional system of the Carboniferous Huanglong Formation in the eastern Sichuan Basin was identified. The lithological characteristics of the Lower Member, Middle Member, and Upper Member were analyzed and classified. Before the use of carbon, oxygen, and strontium isotopes in the analysis, all of the geochemical data were tested for validity. On the basis of the Z values obtained from carbon and oxygen isotopes, the paleoenvironments of the three members were elucidated. Lower Member was dominantly an enclosed marine environment with intense evaporation and little freshwater input into the sea. Middle Member developed in a semi-enclosed to normal marine environment with many rivers. Upper Member was formed in a normal marine environment. The east Sichuan Basin was enclosed by paleouplifts before the deposition of the Huanglong Formation, forming a relatively enclosed depositional setting. Paleogullies developed in the Silurian strata that underlie the Carboniferous rocks; these paleogullies can be identified. On the basis of a comprehensive analysis, we propose that the Huanglong Formation developed in a platform system. Four microfacies were identified: supratidal flat, dolostone flat, grain shoal, and shelf microfacies. The high-permeability and high-porosity characteristics of the grain shoal microfacies are favorable for hydrocarbon accumulation, while the supratidal flat and shelf microfacies developed very few high-quality reservoirs. The paleogullies, in which increased amounts of grain shoal microfacies developed, controlled the distribution of high-quality reservoirs. [ABSTRACT FROM AUTHOR]

The Upper Permian Dalan Formation and the Lower Triassic Kangan Formation in the Persian Gulf area are mainly composed of shallow marine facies limestone and dolomite. Two subsurface-cored intervals were investigated in order to understand the original mineralogy and paleoceanic conditions. The decreasing trend of Sr concentration in these deposits shows that aragonite was precipitated during the Late Permian and then gradually changed to calcite toward the Permian-Triassic boundary (PTB). The dissolution rate of aragonite decreased from 60 m below the PTB toward the boundary, with the only exception at 10 m below the Permian-Triassic Boundary (PTB) due to the Permian-Triassic unconformity in this region. The increasing trend of Mg/Ca ratio in a global scale at the end-Permian time shows that the interpreted variation of mineralogy does not result from the change of this ratio. The increasing pCO2 and decreasing pH are considered to be the main controlling factors. The increase of Ca2+ at the end-Permian time due to the input of meteoric waters is too little to fully compensate this effect A local maximum of the Si content just at the PTB confirms the input of runoff waters. [ABSTRACT FROM AUTHOR]

The Al-Jawf area of northern Saudi Arabia provides spectacular outcrops of Early Devonian carbonate bioherms in the Wadi Murayr and Dumat Al-Jandal areas. These carbonate bioherms belong to the Qasr Member of the Late Pragian-Early Emsian Jauf Formation (~405 Ma) and are surrounded by a bioclastic carbonate succession. The Qasr Member is the first major carbonate unit of the Palaeozoic succession in Saudi Arabia that mainly consists of microbialite carbonates and metazoan reefs exhibiting distinct mound features. These bioherm complexes and their associated carbonate facies are pervasively dolomitized. Stratigraphic, petrographic and geochemical analyses were conducted to determine the facies distribution and interpret their depositional and diagenetic processes. A total of 11 facies are identified from a range of depositional environments within a carbonate platform system, ranging from tidal flats, lagoon, shoal, patch reefs to reef front. The main diagenetic processes are carbonate cementation and dolomitization. Dolomitization occurred as both fabric preserved (mostly in grain-dominated facies) and fabric destructive (mud-dominated facies). The microbialites and coralline sponges facies show poor reservoir with visual porosity less than 5%, but this succession may have a potential to serve as a good source for the underlying and overlying facies. Ooid and peloidal grainstone facies show fair to good visual porosity that locally exceeds 10% with intergranular porosity as the dominant type. However, in the most studied samples, vuggy and intraparticle porosities are observed as the dominant type. [ABSTRACT FROM AUTHOR]

ABSTRACT The technical and economic success of a CO2 geological storage project requires the preservation of the site injectivity and integrity properties over its lifetime. Unlike conventional hydrocarbon gas injection, CO2 injection may imply geochemical reactions between acidified pore fluids and target reservoir formations, leading to modifications of their poromechanical properties. To date, the chemical effects on the host rock mechanical behaviour are not satisfactorily taken into account in site-scale numerical models of CO2 injection, mainly due to a lack of quantitative data. The present experimental work aims at characterizing the evolution of carbonate poromechanical properties induced by acid alteration. Unlike standard experimental approaches, the implemented alteration method induces a homogeneous dissolution pattern, which ensures reliable poromechanical measurements on altered samples. These well-controlled alteration conditions allow a proper interpretation of the test results through the macroscopic continuous approach of poromechanics. Petrophysical, geomechanical, and petroacoustic properties of outcrop carbonate samples have been measured for different levels of alteration to mimic long-term exposure to reactive brine. The obtained experimental data show clear trends of chemically induced mechanical weakening. Nuclear magnetic resonance measurements and microscanner imaging performed before and after alteration have provided complementary insights into the alteration effects at the microscopic scale. [ABSTRACT FROM AUTHOR]

The article discusses a research concerning shale distribution and geochemistry of 4th member of Shahejie Formation in Liaohe Western Depression in Bohai Bay Basin, China and examines its shale oil accumulation geological conditions. Details about the shale sedimentary and distribution in the area, shale thickness, and types and abundance of organic matter are noted. Also provided is information on the lacustrine shale oil accumulation of the shales.

The article focuses on findings of a study on geochemical characteristics and geological significance of picritic rocks in Permian Tiaohu Formation from Santanghu Basin, Xinjiang of China. Topics include magmatic activity of Permian in Santanghu Basin; characteristics of picritic rocks, such as SiO2 amount of picritic rocks; and voluminous postcollisional granitoids and Armantai and Karamaili suture zone formation age.

The article reports on the meganodular limestone in South China. It highlights time-specific facies-based three-dimensional network structure of the Upper Ordovician Pagoda Formation in the country. It also outlines the basis of the analysis on the formation which involves the use of geochemical, paleontological and sedimentological information.

The article discusses a research concerning geochemistry and petrography of clastic deposits from the Late Paleozoic Shihezi Formation in Eastern Ordos Basin in China, along with the implications for provenance and tectonic setting. Topics include the significance of provenance studies in reconstructing paleo-drainage systems, mineralogy and petrology of sandstones, and major, trace, and rare earth element compositions of sandstones from the formation.