Search

The Sissingué Gold Project is in Northern Côte d'Ivoire and part of the southern extension, a large peneplain of the landscape in South Mali. The area has experienced extensive weathering and erosion over a long time, resulting in a widespread and complex regolith cover. This diverse and vast regolith cover poses considerable difficulties for exploration. To overcome this problem, we adopted mapping of regolith units using machine learning (ML) with support vector machine (SVM) and artificial neural network (ANN) algorithms. The main objectives were to (1) make the predictive regolith map of the study region using these algorithms with data obtained from Landsat-8 operational land imager, Advanced Land Observing Satellite Phased Array Type L-Band Synthetic Aperture Radar digital elevation model and Sentinel-1A; (2) show the method of pre-processing and processing the required data and (3) develop the regolith landform unit (RLU) map from the predictive regolith map and collected data based on the Relict – Erosional – Depositional model. Tests using the SVM and ANN algorithms showed that both ML tools could accurately map regolith landforms. An innovative method of optimizing data using parameters is presented. The results showed that ANN outperformed SVM with an overall accuracy of 87.01% and a kappa coefficient of 0.84, whereas the corresponding values for SVM were 86.69% and 0.84, respectively. However, the validation data obtained from SVM-based prediction exhibited a better score than that of validation data obtained from ANN-based prediction. The Sentinel-1A radar band combined with Landsat-8 data reduced the vegetation-masking effect and improved the classification results. The RLUs of this area are composed primarily of relicts at 24.91%, including lateritic residuum and soil, depositional material at 36.39% with exotic sediments and ferrierite and the remaining 38.7% of erosional material made of saprolite, colluvial fragments, and mottled zones on flanks. [ABSTRACT FROM AUTHOR]

Remote sensing plays an increasingly important role in climate research, and as remote sensing observation files span longer periods of time, we are receiving more and more data on climate parameters such as clouds. Four decades ago, it was proposed that the area of planar shapes change with their perimeter following the power law. The exponent of this relation for the areas of clouds (typical and noctilucent) and rain determined by satellites and radar is 1.35 close to 4/3 of the classical turbulence theory of 1941. In this paper, we propose a new relationship between the area and the perimeter of rain and clouds using remote sensing observations. This relationship leads to the development of a new model for the detection of extreme natural phenomena related to rain and clouds. [ABSTRACT FROM AUTHOR]

Lineament mapping is a very important step in geological studies and mineral exploration, with the evolution of remote sensing, processing methods as well as the availability of several optical and radar satellite data, lineaments can be detected without using traditional methods. The objective of this work is to recommend the most suitable data for lineaments to be used in the field of geological science, by comparing the performance of three different RADAR data, namely ALOS PALSAR (The Advanced Land Observing Satellite Phased Array type L-band Synthetic Aperture Radar), Radarsat-1 and Sentinel-1 for automatic lineament extraction using a combination of edge detection and line linking algorithms. The methodology consists to link between the length, number, orientation and density of lineaments with surface characteristics such as the slope, faults, lithology, discontinuities and mineral veins. The results obtained show that the extracted lineaments from Sentinel-1 VH polarization have a better correlation with geological units, tectonic system direction, as well as shading and slope maps, which is due to the effectiveness of VH polarization, which is independent of soil properties compared to the other polarizations that have shown an overestimation of the lineaments. [ABSTRACT FROM AUTHOR]

Interferometric Synthetic Aperture Radar (InSAR) came into practical use as a geohazard monitoring tool in the 1990s. The uptake of this remote sensing technique however is geographically varying, and Australia has been one of many continents not fully utilizing the available InSAR data. As a result, limited knowledge exists on the application of InSAR data to obtain insights and benefits in geohazard risk monitoring and management. Due to the said limitation, this research carried out a concise technical background study and investigated a suite of case studies to demonstrate the potential for geohazard monitoring and assessment in Australia using InSAR. The differential InSAR workflow was applied to sites that experienced heaving and subsiding of the ground surface, mining, earthquake, landslides, and tunnelling in West Metro Melbourne (VIC), Musgrave (SA), Crinum mine (QLD), Pelham (TAS), Lake Muir (WA), and Sydney (NSW). The results of the Differential InSAR analysis resulted in acceptable ground movement and deformation estimates when compared with measured field data. Future opportunities related to new applications of the InSAR technique on geohazard reduction considering climate change contributions and probable coupling with artificial intelligence techniques were also discussed. This research has formed a conducive and scientific learning medium, which may encourage the growth of multidisciplinary research combining the fields of remote sensing and geotechnical engineering to investigate the impact of geohazards. [ABSTRACT FROM AUTHOR]

Remote sensing based retrieved of soil moisture from low frequency passive microwave observations is preferred in different aspects such as better spatial coverage and more measurement compared to traditional ground-based measurements. However, due to coarse spatial resolution of the observations, their applications are limited in local to regional studies. This paper provides a framework using random forest regression to disaggregate the daily SMAP enhanced soil moisture (SPL3SMP_E) utilizing several ancillary data to overcome the spatial resolution limits and cloudiness effects. Ancillaries were acquired from sentinel-1 radar, MODIS monthly NDVI, land cover, topography, and surface soil properties. To validate the downscaled results with 1-km spatial resolution, the OZNET soil moisture measurements and sparse TDR ground soil moisture measurements were collected from Murrumbidgee catchment (Australia) and Firozabad catchment (Iran), respectively. Downscaled soil moisture product unbiased root-mean-square error (UnbRMSE) of ensemble learning demonstrated a range of 0.023 and –0.07 cm3/cm3. The produced downscaled soil moisture exhibited better local heterogeneity when compared to the coarse data and tracked the dynamics of temporal changes in soil moisture. Furthermore, cumulative distribution function (CDF) analysis showed good accuracy of downscaled soil moisture in grassland and cropland. Taken together, the findings supported usefulness of the suggested methodology in downscaling the medium- resolution SMAP soil moisture product. [ABSTRACT FROM AUTHOR]

In this paper, the possibilities of remote sensing of moisture profiles in the arable layer were theoretically and experimentally studied based on the nadir measurements of reflection coefficients at three frequencies of 1.26 GHz, 796 MHz and 641 MHz. The reflection coefficients were measured by the impulse method during natural cycles of evaporation and moistening of an arable layer at the agricultural field being under steam, located at 56°05ʹN, 92°40ʹ E in the area of the Minino village, Krasnoyarsk region, the Russian Federation. The soil moisture profiles were retrieved in the course of solving the inverse problem, in which the reflection coefficients at different frequencies acted as an informative sign. The root-mean-square error and the determination coefficient (R2) between retrieved and measured moisture values in the topsoil thickness of 0.15 m were 3.3% and 0.79, respectively. In the course of theoretical calculations, it was shown that in practice, it is impossible to predict the sensing depth of the arable layer without preliminary information on the form of moisture profile. Moreover, the sensing depth depends not only on the form of soil moisture profile but also on frequency. In this regard, it is impossible to correlate the effective soil moisture, retrieved from single-frequency measurements of the reflection coefficient in the approximation of homogeneous topsoil, with the specific thickness of topsoil. The study shows the promise of developing multi-frequency radar systems for remote sensing of soil moisture profiles in the arable layer, the potential of which can be realized on lightweight unmanned area vehicle (UAV) platforms. [ABSTRACT FROM AUTHOR]

The nonstationary clutter is one of the biggest challenge to ocean remote sensing radar system such as high frequency (HF) mixed-mode surface wave radar. The performance of space-time adaptive processing (STAP) degrades badly with limited homogeneous secondary training data support. Single dataset algorithms overcome the problem by working on primary data solely. But the heavy computational complexity as well as the inaccurate estimation of the clutter covariance matrix restricts the practical application of these methods. In this letter, we propose a novel reduce-rank-based single dataset STAP to suppress the nonhomogeneous clutter in practical HF radar system. A fast implementation of subspace tracking algorithm is introduced to estimate the clutter subspace as well as reduce the computational cost via pulse iteration method. The effectiveness of the proposed method is verified by both simulated and experimental data. The results show it outperforms traditional single dataset STAP methods and the nonstationary clutter can be greatly suppressed. [ABSTRACT FROM AUTHOR]

The primary objective of these studies was to quantitatively assess the ground deformation velocities and rates and their natural and man-made controlling factors as the potential risks along the seismically active 70 km section of buried Baku-Tbilisi-Ceyhan Oil, South Caucasus Gas, Western Route Oil and South Caucasus Pipeline Expansion Gas pipelines in Azerbaijan using Persistent Scatterer Interferometric Synthetic Aperture Radar (PS-InSAR) technique. PS-InSAR analysis showed that the continuous subsidence was prevailing in the kilometer range of 13-70 of pipelines crossing two active seismic faults. The ground uplift deformations were observed in the pipeline kilometer range of 0-13. The minimum and maximum vertical ground movement velocities were observed to be −21.3 mm/y and 14.1 mm/y along 70 km section of pipelines with 250 m buffer zone. Both of these sites were observed at the range of seismic faults. The spatial distribution of sites with ground deformation velocity less than −15 mm/y and more than 15 mm/y was diverse and random all along 70 km of pipelines without any cumulative spatial patterns. Based on the lower mean, variation and standard deviation of pixel values, the seismic fault in the kilometer range of 21-31 revealed its higher vulnerability to subsidence processes rather than the Seismic Fault in the kilometer range of 46-54. The ground deformation velocities within the range of Seismic Fault KP21-31 revealed the minimum and maximum values of −19.74 mm/y and 14.1 mm/y, respectively whereas at the Seismic Fault KP46-54, the minimum and maximum values were −17.07 mm/y and 9.29 mm/y, respectively. Encouraging level of agreement with the regression coefficients of 0.92 and 0.96 for known subsiding sites at KP28 + 500 and KP52 + 750 and 0.97 and 0.96 for known uplifting sites at KP04 + 900 and KP35 + 050 respectively was observed between the high-precision GPS and PS-InSAR measurements. The diverse spatial distribution and variation of ground movement processes along pipelines demonstrated that general geological and geotechnical understanding of the study area is not sufficient to find and mitigate all the critical sites of subsidence and uplifts for the pipeline operators. The prediction of the potential subsidence or uplift locations based on the field visual verifications holds a lot of uncertainties without broad and detailed scale airborne and satellite space observation technologies. The justification of the budget for the geotechnical maintenance activities along long-range oil and gas pipelines requires sophisticated prioritization and planning of the remediation sites and clear quantitative and qualitative risk assessment proving the activeness of these sites and effectiveness of the remediation measures. This means that the PS-InSAR – based approach outlined in this paper is a significant improvement over current ground-based monitoring practices or can significantly contribute them in the initial phase of risk assessment and prioritization. [ABSTRACT FROM AUTHOR]

In this work, a mechanism is proposed to enhance the remote sensing accuracy of conducting objects located within continuous random media. Through our mechanism, operating frequency would be selected properly for preciously radar detection. In this regard, numerical analysis for the influence of medium characteristics on the radar cross section (RCS) is conducted. Illumination region is assumed as partially convex surface while considering targets having large sizes of about four wavelengths. We handle the effect of various parameters such as the medium randomness intensity and scale size, target configuration having curvature and size and incident waves polarization. Waves are backscattering from objects in both free space and random medium while considering horizontal polarization of incident waves. Such polarization generates creeping waves in which they have an extra impact on the backscattering waves where would be avoided through our mechanism. [ABSTRACT FROM AUTHOR]

A three-dimensional (3D) image reconstruction method for the spinning target based on the radar network is proposed in this letter and the design concept is sourced from the similarity of the two-dimensional (2D) imaging result with the target’s mapping on the imaging plane. The proposed method has the capacity to generate 3D image of the spinning target by reconstructing the scattering distribution in 3D Cartesian space. Firstly, the inverse Radon transform is applied to obtain the imaging result of the spinning target and the mapping formulas for mapping the air points onto the 2D image plane are derived. In addition, the radar network 3D image reconstruction model for the spinning target is constructed and the corresponding algorithm for solving the reconstruction model is proposed. Finally, some experiment results are given to verify the effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

In this paper, we provide a review of the different approaches used to detect activities inside a building using through-the-wall radar. We classify two main types of radar that are used in detection activities behind the wall. Stepped frequency and pulse compression radar are the most frequently used types of radar in through-the-wall radar imaging (TWRI). In addition, a preference has been shown for using frequencies in the range of 1-3 GHz. Though a high volume of research is being done in this area, there are still many open issues. Detectability of the human being, wall modeling, and target differentiation have been identified as the main open issues in the field of TWRI. [ABSTRACT FROM AUTHOR]

The range resolution is limited by insufficient continuous bandwidth in High Frequency Radar (HFR), due to the working frequency band (3-30 MHz) is heavily congested. In order to minimize the mutual interference from other users and improve bandwidth utilization, the Discontinuous Spectra Synthetic Bandwidth (DSSB) signal is proposed. For collecting all target information from echoes, multiple snapshots are needed to synthesize the range spectrum of multiple targets in the long-range observation window. The Multi-Snapshots Compressed Sensing-Information Extraction (MCS-IE) method is proposed to accurately estimate range and amplitude from multiple snapshots. For MCS-IE method, a new measurement matrix according to random frequencies of compressed sensing is designed for samples in every snapshot, and then information extraction method is used for the same range window with multiple samples and estimations. A series of comparison experiments based on measured data from HFR Frequency Monitoring System (FMS) are tested to verify proposed methods. [ABSTRACT FROM AUTHOR]

This contribution proposes an evaluation of lidar and radar data processing and its potential in revealing archaeological features within a level plain environment, the southern lowland of Verona (Italy), focusing on evidences dating back to the Bronze Age. Many archaeological sites in the research area, including some of the most outstanding settlements of Terramare Culture, were identified or at least examined through aerial photo observation. Even if in several occasions modern agricultural activities contributed to the discoveries, bringing to the surface artifacts and scrapes of buried layers, this kind of impact has also been progressively deteriorating the archaeological record, hence the proto-historic landscape is now discernible through evanescent marks which cannot be always detected using customary optical sensors. Lidar and radar data analysis has then been considered as an alternative, non-invasive method of investigation on such a vast area. [ABSTRACT FROM AUTHOR]

Terrestrial biosphere carbon dynamics are the most uncertain elements of the global carbon budget. Carbon stocks estimated using spatially extensive remote sensing are crucial in reducing this uncertainty, and using these stocks as initial conditions to biosphere models can improve carbon flux predictions beyond the site level. Yet remote-sensing data are not always consistently available for large regions, so methods assessing carbon uncertainty using data sources in one location may not be transferable to another. This study assesses the use of multiple-source data from lidar, radar, imaging spectroscopy, and national forest inventories to derive forest structure and composition necessary to initialise the Ecosystem Demography model (ED2), and hence evaluate short-term carbon flux uncertainty over Harvard Forest, Massachusetts. ED2 was initialized using forest structure and composition derived from lidar and national forest inventories, radar and national forest inventories, lidar and imaging spectroscopy, and radar and imaging spectroscopy resulting in net ecosystem productivity uncertainty of 26.3%, 41.9%, 19.6%, and 20.2%, respectively, compared to ground-based forest inventory initializations. This study uniquely offers a multitude of methods to estimate forest ecosystem state, with resulting carbon uncertainties, transferable to regions with potentially different data availability. Furthermore, in preparation for satellite radar, lidar, and imaging spectrometer, this study highlights the importance of combining techniques deriving forest structure and composition at different scales, binding regional to potentially global carbon-fluxes with remote sensing, reducing this uncertainty source in global climate models. [ABSTRACT FROM PUBLISHER]

The method based on the dual-frequency correlation function of reflected signals is one of the effective approaches for sea wave height estimation in radar altimetry. This method, however, has been applied for relatively low-altitude flights. As shown in our early studies, for the estimation of the sea wave heights using the dual-frequency correlation function, it is necessary to synthesize the array antennas, which are perpendicular to the flight direction. In this paper, we derived the limiting accuracy of the measurement of the sea wave heights using the dual-frequency microwave interferometry, and analyzed its dependence on the sea wave heights and the radar system parameters. Evaluation of the limiting accuracy of the measurement of the sea wave heights shown in the paper verified its high accuracy for sea status monitoring using a small remote sensing spacecraft. [ABSTRACT FROM AUTHOR]

The use of remote-sensing images is becoming common practice in the fight against environmental crimes. However, the challenge of exploiting the complementary information provided by radar and optical data, and by more conventional sources encoded in geographic information systems, is still open. In this work, we propose a new workflow for the detection of potentially hazardous cattle-breeding facilities, exploiting both synthetic aperture radar and optical multitemporal data together with geospatial analyses in the geographic information system environment. The data fusion is performed at a feature-based level. Experiments on data available for the area of Caserta, in southern Italy, show that the proposed technique provides very high detection capability, up to 95%, with a very low false alarm rate. A fast and easy-to-use system has been realized based on this approach, which is a useful tool in the hand of agencies engaged in the protection of territory. [ABSTRACT FROM PUBLISHER]

To overcome the inherent conflict between azimuth resolution and wide swath in conventional synthetic aperture radar (SAR) systems, the concept of raster scan SAR (RS-SAR) is proposed in this letter, where wide swath observation is realized by slant beam scanning and effective reception of echo data is achieved by varying the pulse repetition frequency. Details of the RS-SAR are provided, and its significantly improved performance is demonstrated by an example system based on several derived key performance indicators. [ABSTRACT FROM AUTHOR]