Search

Objective: Some attorneys claim that to adequately cross examine neuropsychological experts, they require direct access to protected test information, rather than having test data analyzed by retained neuropsychological experts. The objective of this paper is to critically examine whether direct access to protected test materials by attorneys is indeed necessary, appropriate, and useful to the trier-of-fact. Method: Examples are provided of the types of nonscientific misinformation that occur when attorneys, who lack adequate training in testing, attempt to independently interpret neurocognitive/psychological test data. Results: Release of protected test information to attorneys introduces inaccurate information to the trier of fact, and jeopardizes future use of tests because non-psychologists are not ethically bound to protect test content. Conclusion: The public policy underlying the right of attorneys to seek possibly relevant documents should not outweigh the damage to tests and resultant misinformation that arise when protected test information is released directly to attorneys. The solution recommended by neuropsychological/psychological organizations and test publishers is to have protected psychological test information exchanged directly and only between clinical psychologist/neuropsychologist experts. [ABSTRACT FROM AUTHOR]

An optimised method was established for the determination of four chloropropanols in paper straws, namely 1,3-dichloropropan-2-ol(1,3-DCP), 2,3-dichloropropan-1-ol (2,3-DCP), 3-monochloropropane-1,2-diol (3-MCPD) and 2-monochloropropane-1,3-diol (2-MCPD). After extraction with a food simulant, purification with matrix solid phase dispersion (MSPD), and derivatisation using heptafluorobutyrylimidazole (HFBI), the chloropropanols were analysed by gas chromatography–tandem mass spectrometry (GC-MS/MS), and quantified with a deuterated internal standard. Under the optimised conditions, the limit of detection (LOD) was 0.200 µg/L for the four target compounds. The recoveries were in the range of 71.4% – 119.4% with relative standard deviations (RSDs) of 0.4% – 9.9%. The method fulfilled the requirements of the European regulations for the quantification of 3-MCPD and 1,3-DCP. Fifteen paperboard straws were tested using the proposed method. The results showed that 1,3-DCP and 3-MCPD exhibited the highest detection rate among the four chloropropanols tested (93.3%). the method can be used to detect chloropropanol contamination in paperboard products, and further to guide food manufacturers to reduce the levels of chloropropanols in paperboard food contact materials. [ABSTRACT FROM AUTHOR]

As a kind of synthetic aromatic polyamide, aramid fiber has many outstanding properties, such as high strength, high modulus, etc. The composited paper reinforced by aramid fiber is widely used in honeycombs and its strength is of great concerns. In this paper, a three-dimensional progressive failure phase field model is employed to investigate the failure mechanism of aramid honeycomb paper under microscopic length scale. A mesh mapping technique is used to handle the complex geometry of the material, and an explicit solving scheme is used to improve the solving efficiency. The theory is implemented into ABAQUS through the users' subroutine VUEL. The interfacial debounding and matrix cracking in the short fiber reinforced composite are captured successfully, and the complicated failure mechanism is explored from the modeling results. The present phase field modeling technique has provided a useful numerical tool for the strength prediction of aramid short fiber reinforced composites. [ABSTRACT FROM AUTHOR]

The relationship between environmental regulation and firm productivity has been widely debated but inconsistencies in findings across different studies. Using detailed firm-level micro-data from 2000 to 2007, this paper employs difference-in-difference combined with matching based on entropy balancing method to explore the effect of environmental regulation on firm total factor productivity (TFP) in pulp and paper industry in China. Our main findings are as following: Firstly, stricter environmental regulation, as represented by the Wastewater Discharge Standards for Pulp and Paper Industry in Shandong province, increases firm TFP significantly. Moreover, the coefficients of interest are robust to multiple robustness checks. Secondly, dynamic effects estimates reveal that when faced with this phase-in environmental regulation, firms take the foreseeably increasing strictness into account from the very beginning and prefer to take one-step adjustment to reach full compliance. Thirdly, potential mechanism analysis finds that the positive effect mainly comes from the improvement of resource allocation efficiency within firms. Fourthly, the heterogeneity test indicates that the effect of environmental regulation on firm TFP is heterogeneous across firms with different sizes, ages, ownerships, capital intensity, and export status. Finally, this paper provides convincing and insightful evidence that environmental regulation has the potential to achieve the dual goals of environmental sustainability and economic growth and is thus of broader significance for understanding the enforcement of environmental regulation in developing countries. [ABSTRACT FROM AUTHOR]

Three grades of pectin xanthates (PX1, PX2, and PX3) have been prepared by the reaction of pectin with carbon disulfide (CS2) in an alkaline medium using NaOH, via the xanthation process. The percentage yield of prepared pectin xanthates has been found to be 87.06%, 90.38%, and 93.80% for PX1, PX2, and PX3, respectively. Prepared pectin xanthates and raw pectin were utilized for heavy metals (Cu(II) and Ni(II)) and lignin enriched paper industry wastewater (LEPIW) treatment. The removal percentage of pectin, PX1, P X2, and PX3 for Cu removal at optimum condition (adsorbent dose: 5.14 g/L, pH: 5 for Cu and 7 for Ni, optimum temperature: 50°C and time: 80 min for Cu(II) and 100 min for Ni(II)) has been found as 85%, 92.33%, 93.5%, and 94.66% and 76.66%, 89.44%, 91.66%, and 93.33%, respectively, for Ni removal. The LEPIW treatment efficacy for pectin, PX1, PX2, and PX3 has been found to be 54%, 77%, 83%, and 86% for the initial COD: 2000 mg/L, pH: 7, optimum temperature: 40°C in 105 min operation time. Adsorption isotherm studies suggest that Langmuir isotherm is most appropriate which indicates adsorption follows chemisorption. The adsorption capacities of PX1, PX2, and PX3 are found as 309.59, 352.11, and 380.22 mg/g for Cu(II) and 299.40, 315.45, and 328.94 mg/g and for Ni(II), respectively, which is very high in comparison with many other recent literature studies. [ABSTRACT FROM AUTHOR]

The high production of paper, followed by a more significant concern with environmental and economic issues, has led to greater relevance to paper recycling and its raw uses as composite filler. Composites of polypropylene with 10, 20, and 30 wt.% of recycled office waste paper were produced by injection molding and characterized by mechanical and thermal properties. All composites presented a slight reduction of 15°C in thermal stability compared to the polymeric matrix. Moreover, as the filler amount increased, the degree of crystallinity was reduced proportionally. The mechanical test showed similar tensile strength values among neat polymer andcomposites but also showed an increase in the composite's tensile modulus, related to the stiffness of the natural filler. The composite with a higher percentage of waste paper (30 wt.%) maintained equivalent properties as neatpolypropylene and other composites (10 and 20 wt.%). Thus, 30 wt.% composites proved to be an excellent material with less synthetic polymer percentage, keeping thermal and mechanical properties comparable to the neat PP. Furthermore, this composite does not need chemical treatment or additives harmful to the environment. It is suitable for future applications in various plastic products such as packaging and domestic utensils. [ABSTRACT FROM AUTHOR]

In addition to the large volume, the generated wastewater in paper and cardboard recycling industry contains various organic compounds and dyes. Treatment of these wastewaters is difficult due to the diversity of contaminants and the complexity of their chemical structure. This study aimed to investigate the efficiency of the coagulation and flocculation process by the new mixture of coagulants for wastewater treatment in one of the paper and cardboard recycling industries. To determine the efficiency of the coagulation and flocculation process in removing the parameters, including turbidity, colour, TSS, and COD, the Jar Test was used in laboratory conditions. By changing the variables, such as pH, coagulant type (PAC/MgCl2, PAC/Polymer, MgCl2/Polymer, MgCl2/PAC, PAC/MgCl2/Polymer), coagulant dose, and polymer dose, the optimal conditions were determined. Based on the results, the highest turbidity removal efficiency was achieved for the combination of coagulant and coagulant aid (PAC/MgCl2/Polymer) at pH 11. According to the experiments, the highest removal efficiency of turbidity, colour, COD and TSS were95.43%, 25.16%, 16.16%, and 83.33%, respectively. According to the obtained results, the coagulation and flocculation is a suitable method to remove turbidity and suspended solids in the paper and cardboard recycling industry wastewater. However, in order to remove more colour and COD, additional treatment is required. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Natural Fibers is the property of Taylor & Francis Ltd and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Depoliticization has emerged as a key concept in analyzing the changing political dynamics of capitalist democracies. Yet, the concept of public interest has been relatively absent in depoliticization literature. This article argues for a more systematic inclusion of public interest politics in scrutinizing de- and repoliticization. The argument is advanced through strategic-relational theory by interpreting public interest as (1) a terrain of political struggles, (2) a mode of doing politics and (3) a method of enquiry. These dynamics are examined in the empirical context of Finnish forest industry's political strategy in the Kaipola paper mill closure in August 2020. The forest conglomerate UPM-Kymmene politicized its paper mill shutdown by shifting the responsibility to the centre-left governmental coalition's purportedly business-hostile policies. However, analyzing the case through UPM strategies and the paper production crisis, the closure falls in line with the forest industry's long-term business strategy. The forest industry's and UPM's strategy is recognized as a forceful defense of a corporate polity where public interest is equated with the success of key economic actors. The article concludes with an argument for the politics of public interest as a vital research perspective for analyzing contradictions surrounding 'the economy'. [ABSTRACT FROM AUTHOR]

The Journal of Critical Realism has issued a call for papers for a special issue on "critical realism and the self." The concept of the self is seen as crucial for social change and emancipatory theorizing. The special issue aims to explore various aspects of the self, including subjectivity, reflexivity, authenticity, personhood, and identity. Submissions can be theoretical or applied, and can engage with critical realism or critique it. The deadline for submissions is May 31, 2024, and the final papers are required by November 19, 2024. [Extracted from the article]

The aging process of paper will be accelerated by acidification behavior during the storage process of paper archives, and the mechanical properties of paper archives will be weakened. By deacidizing and strengthening, the further aging of the acidified archives paper can be delayed or prevented, and the mechanical properties can be improved, so that the service life of paper archives is prolonged. To delay even to prevent the aging process, deacidizing and strengthening technology is employed. Herein, the "hybrid" system was reported by combining nano-calcium carbonate as deacidification agent, modified hydroxypropyl cellulose as reinforcement agent and ethanol as dispersant. The artificially acidified paper was brushed with it, and the pH value, mechanical properties and whiteness were measured to study the effect of deacidification and reinforcement. The results showed that oleic acid was successfully grafted onto hydroxypropyl cellulose by N,N′-carbonyl diimidazole mediated method to obtain oleic acid grafted hydroxypropyl cellulose with good dispersion in ethanol. After treating acidified paper with "hybrid" system, the pH value and the tensile strength index increase, the whiteness is almost unchanged, that is, the use of "hybrid" system plays a good deacidifying strengthening effect. The acidified paper samples before and after treatment with "hybrid" system were subjected to dry-heat aging treatment. Compared with acidified paper, the pH value, tensile strength index and whiteness of acidified paper treated with "hybrid" system are effectively inhibited, that is, the use of "hybrid" system can effectively delay the aging and acidification process of paper. [ABSTRACT FROM AUTHOR]

In the present study, a kinetic model has been developed to predict the chemical oxygen demand (COD) removal efficiency of Fenton process for the treatment of pulp and paper mill (P&P) wastewater. In order to investigate the effects of main parameters including Fe(II) dosage, H2O2 dosage, and pH, 45 experiments have been carried out at three levels for each parameter, and thus COD removal efficiency has been obtained. The Fenton process was simulated by using 10main reactions, and the model was solved numerically according to a specific algorithm. All the pollutants in the P&P wastewater were assumed to be a pseudo-material, andapparent kinetic constant (k**)was calculated using a developed iterative method. The results of the numerical model indicated that the proposed model had a great potential to predict COD removal efficiency for P&P wastewater by Fenton in comparison to the first and second-order kinetic models. Accordingly, R-squared (R2), Root Mean Square Error (RMSE), and Mean Relative Error (MRE) of the numerical kinetic model were 0.93, 4.296 × 10−7, and 0.035, respectively, implying remarkable accuracy of the numerical model. Furthermore, at the optimum point of Fenton process,which was pH: 3,[H2O2]:0.015 Molar, and [Fe(II)]: 0.015 Molar, the COD removal efficiency of P&P wastewater reached 78%. As the basis of the numerical model was established according to mechanisms of Fenton process, the results demonstrated the great performance of the advanced kinetic model in the estimation of the COD removal efficiency, the behaviour of effective parameters such as pH, H2O2, and Fe(II) along with their effects on k**, and Fe(III) accumulation during Fenton process. [ABSTRACT FROM AUTHOR]

This study aims to determine the lipophilic component that affects the quality of pulp and paper products in wood of 10-year-old Anthocephalus cadamba (families 23, 11 and 6) and 5-year-old Anthocepalus macrophyllus (families 75, 85 and 2). The results showed that the main group of compounds that appeared frequently and were identified in the lipophilic fraction were fatty acids (palmitic, oleic, linoleic and stearic acids), fatty alcohols (eicosanol, heneicosanol and tetracosanol), sterols (β-sitosterol and campasterol), hydrocarbons (hexadecane, tricosene and cyclotetracosane), aldehydes, alongside minor amounts of triterpenoid. F11 and F2 can be promoted as raw materials for pulp and paper, while F6 and F75 are not recommended because of the high levels of lipids such as sterols, triterpenoids, hydrocarbons, fatty acids, and fatty alcohols. [ABSTRACT FROM AUTHOR]

Cellulose nanofibrils (CNF) can be modified to be used as a coating on food paper packaging. Previous research on PVA/CNF composites showed a low viscosity, which impacted their performance on the coating paper process. To overcome this problem, a thickening agent, such as carboxymethyl cellulose (CMC), is needed. In this work, the effect of CMC on PVA/CMC/CNF nanocomposites was investigated by varying the concentrations of CMC with PVA/CMC and CNF ratio of 80:20 and 90:10. The nanocomposites were characterized by their physical and tensile properties which could affect their coating performance. Moreover, the coating process was conducted on paper and the performances of the coated paper were studied. The results showed that the increase in CMC concentration led to an increasing viscosity and good zeta potential, suggesting good dispersion. Moreover, the addition of CMC improved the tensile properties of PVA/CMC/CNF nanocomposites. However, SEM analysis of PVA/CMC-1:CNF (80:20) revealed the occurrence of agglomeration which might influence the performance of the coated paper. Interestingly, PVA/CMC-1:CNF (80:20) had an excellent water resistance, with the lowest Cobb60. Moreover, the addition of CMC 1 wt% increased WVTR, which remained lower than the blank sample. Meanwhile, PVA/CMC-2:CNF (80:20) demonstrated the best performance in the oil absorption and tearing resistance test. In summary, the addition of CMC can effectively improve the physical and tensile properties of the PVA/CMC/CNF, as well as the barrier properties and tear strength of the PVA/CMC/CNF coated paper. The results demonstrate the potency of this material as a coating for food packaging paper. [ABSTRACT FROM AUTHOR]

AbstractMilk is a major dietary source of calcium; thus, accurate and precise quantification of calcium in milk and other dairy products is necessary for quality control. Conventional instrumental methods are sensitive and accurate but require expensive instrumentation, sample pretreatment, skilled personnel, and a long detection time. Herein, a microfluidic paper-based analytical device (µPAD) was developed to quantify calcium ions (Ca2+) in milk using a smartphone as a detector. The method utilized a complexometric reaction between Ca2+ and ethylene diamine tetraacetic acid with murexide as an indicator. The response was the average color intensity at the detection zones measured using the Color Picker application. The proposed µPAD exhibited a good linear detection range (1 to 10 mM), a low detection limit of 0.42 mM, and a short analysis time of 2 min. The determination of Ca2+ in milk samples using the proposed µPAD was consistent with a potentiometric method. The proposed µPAD demonstrates many advantages, including rapid detection, acceptable accuracy, low cost, low sample volume, and suitability for on-site quantification of Ca2+ in real samples. [ABSTRACT FROM AUTHOR]

AbstractThe peroxidase-like properties of a graphene oxide/platinum-cobalt nanocomposite and the rapid color development mechanism of 3,3′,5,5′-tetramethylbenzidine (TMB) through the decomposition of ·OH from H2O2 were utilized to prepare a nonlabelled, simple, and sensitive paper-based colorimetric sensor. This sensor allows visualization of the results and instantaneous detection, enabling quantitative measurement of H2O2. The graphene oxide/platinum cobalt composite was synthesized using a two-step procedure. Its properties were investigated using transmission electron microscopy (TEM), Raman spectroscopy, and energy-dispersive X-ray spectroscopy (EDS). The composite was subsequently transferred onto a paper substrate to create the colorimetric sensor. The optimal catalytic conditions were a composite concentration of 201.17 µg/mL, a color development time of 3 min, a TMB concentration of 2 mmol·L−1, and a pH of 4. Using the optimal conditions, the paper-based colorimetric sensor has a linear range for H2O2 from 1.0 × 10−5 to 0.1 mol·L−1, with a limit of detection of 1.0 × 10−6 mol·L−1 which is comparable or better than comparable methods. This paper-based colorimetric sensor has potential applications for the rapid determination of hydrogen peroxide. [ABSTRACT FROM AUTHOR]

A novel approach for paper drying using airborne ultrasound technology is presented. A unique experimental setup is developed, and a systematic study is conducted using 23 factorial design of experiments and Analysis of Variance. Three controlling factors are considered in the experiments including the initial moisture content, basis weight and refining condition. The outcome of the experiments is compared to a previous work on direct-contact ultrasonic drying of paper. The results confirm that similar to direct-contact, for airborne ultrasonic drying, the basis weight/thickness of the sample is the most important factor in ultrasonic drying and it is followed by the effect of initial moisture content. Using linear regression model, a correlation for predicting the total time of ultrasonic drying is provided. Quality of the dried samples is evaluated, and the permeability measurements confirmed the effect of pore characteristics on ultrasonic drying. The analysis for energy consumption reveals that airborne ultrasonic drying is more efficient at higher moisture contents. [ABSTRACT FROM AUTHOR]

This note is based on hitherto untapped visual resources (photographs, presentation albums, and scrapbook) on post-World War I Russian refugees in Istanbul that belong to the Anna Mitchell Papers, which were gifted to the Hoover Institution Library and Archives at Stanford University in 1967. [ABSTRACT FROM AUTHOR]

This paper focuses on the Southern African Association for Research in Mathematics, Science and Technology Education's (SAARMSTE's) role as a platform supporting research dissemination and connecting researchers in early grades mathematics (EGM) in the Southern African region. A review of the Long Papers in SAARMSTE over the last 20 years supports the finding of the other review papers in this Special Issue: that there has been substantial growth of attention to EGM since 2013. However, two distinctions are marked when looking at conference papers rather than journal papers. Firstly, there is a particularly large expansion of work in the last 5 years, with a broadening base of participation in this work. Second, looking across all the formats of conference presentations indicates SAARMSTE's role in supporting and building EGM as a key focus of research attention, and bringing together regional and international groups with interests in this area. Given that conference proceedings usually offer a broader picture of emerging interests than journal papers, we reflect on the range of foci of attention within EGM in the SAARMSTE Proceedings, and trends within this. These trends also help us to point to areas that are likely to be of key interest in the next decade. [ABSTRACT FROM AUTHOR]

Aging behavior occurs in the storage process of paper archives, which accelerates the aging process of the paper. Therefore, it is important for paper archives management to explore the aging behavior of acidified paper (AP) and to delay or prevent its further aging. The aging behavior of the commonly used university archives paper with artificial acidification were studied by measuring pH value, electrical conductivity, mechanical properties and whiteness. The results show that the pH value, conductivity, mechanical properties and whiteness of AP change significantly compared with the non-acidified raw paper (P). After dry-heat aging treatment, the pH value of AP decreased more obviously than P, which shows more obvious aging degradation and further acidification of AP. During the aging process of AP, the molecular and structural degradation are promoted by the presence of acidic substances, which increase the electrical conductivity of the system. The microstructures of the paper are changed by acidification and aging treatment, and more fiber fracture, etching and microscopic holes are found in the surface SEM images. The reductions of the tensile index and whiteness of AP are also more significant because of the degradation acceleration of the acid. [ABSTRACT FROM AUTHOR]

The use of printed paper electronics in consumer goods is expected to experience a mass development in the next future. The ink used in these devices contains silver nanomaterials that may be released into the environment at the product end-of-life. We report here the first evaluation of the fate of silver during a pilot-scale recycling of printed paper electronics, made of paper printed with a cellulose nanofibrils-silver nanowire ink. We show that the released effluents are mainly free from silver, which is retained in the pulp conserved for recycling. We use atomic force microscopy experiments to show that this strong pulp-silver bond is due to the embedding of the silver nanowires in the pulp by coils of cellulose nanofibrils. We propose an estimate of the resulting adhesion stress of the nanowires to the ink, high enough to keep the silver inside the pulp during the recycling procedure. [ABSTRACT FROM AUTHOR]

Copyright of Journal of the American Institute for Conservation is the property of Taylor & Francis Ltd and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

In this article, protic ionic liquids (PILs) and deep eutectic solvent (DESs) were explored to enrich the cellulose content of a paper mill sludge (PMS) received from a sanitary paper manufacturing plant. Compositional, morphological, physico-chemical, and thermal decomposition features of PMS were monitored using XRF, SEM, FTIR, XRD, and TGA. Triethylammonium hydrogen sulfate (TEAHSO4), which functioned selectively for the elimination of mineralogical content and cellulose enrichment of PMS, enhanced the cellulose content of the material from 45% to 74% following the pretreatment at 150 °C. Though DESs such as choline chloride-urea behaved poorly toward demineralization relative to PILs, they preserved cellulose effectively in the structure and gave satisfactory saccharification yields that reached over 90%. In addition to integrating the sustainable benefits of PILs and DESs into the valorization of PMS for the first time in literature, this work highlighted the competency of PMS as a cellulose-rich feedstock for biorefinery applications. [ABSTRACT FROM AUTHOR]

A Japanese painting paper is sized with an aqueous solution of alum and animal glue followed by brushing with a mixture of pigments of various colours and aqueous animal glue solution. Subsequently, to mount the Japanese painting to a hanging scroll, the backside of the painting is lined with a first lining paper using wheat starch paste for mechanical support. To evaluate the permanence of the painting paper as a composite material in the hanging scroll, the deterioration behaviour of the unlined painting paper and the lined painting paper was compared considering the material dynamics. After moist heat accelerated ageing (80°C, 65% RH), in the sample immersed in a CuSO4・5H2O solution, cellulose was oxidised by Cu2+ to generate organic acids in the painting paper, and Cu2+ and organic acids migrated to the lining paper. Consequently, the discolouration and oxidation of the painting paper in the lined complex were relatively low compared with those of the unlined painting paper. The pH decrease in the painting paper was also small in the lined complex. Moreover, if the animal glue solution was coated on the painting paper, a buffer effect was shown to operate against the organic acids derived from the oxidation of Cu2+, thereby inhibiting the migration of Cu2+ into the lining paper. In conclusion, the presence of the lining paper inhibited the decrease in the physical strength and degree of polymerisation of the cellulose in the painting paper, thus contributing to its permanence in the lined hanging scroll. [ABSTRACT FROM AUTHOR]

The aging and acidification behavior of paper archives affect their long-term preservation. Therefore, delaying or preventing aging and acidification has become an important topic in the field of paper archives management. the aging and acidification behavior of commercial archival paper were studied by measuring pH value, electrical conductivity, mechanical properties and whiteness in this work. The results show that the aging and acidification phenomena are obvious after dry-heat aging treatment. The molecular degradation of cellulose, hemicellulose, lignin and other components results in the decrease of pH value of the system, which decrease with the increase of the treatment temperature and time. The electrical conductivity of the system increases because of the molecular degradation and structural degradation, and with the increase of the treatment temperature and time, the electrical conductivity increases more significantly. After aging treatment, the paper appears etching and increasing microcosmic pores. With the occurrence of molecular degradation and structural degradation, the tensile index and whiteness of the paper decrease, and with the increase of the treatment temperature and time, the tensile index and whiteness decrease more significantly. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Natural Fibers is the property of Taylor & Francis Ltd and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The mechanical properties of fiber metal laminates (FML) are influenced by several various factors. Interface adhesion plays a particularly crucial role in interlaminar strength. Enhancing the interlaminar strength of carbon fiber reinforced aluminum laminate (CARALL) composites present a persistent challenge due to inherent weaknesses between metal and composite elements. Therefore, this study focuses on improving the interlaminar performance of CARALL composites by introducing cellulose paper interlayer at the metal/composite interface. The cellulose paper interlayer offers the advantage of being cost-effective and sustainable. Cellulose paper-interleaved CARALL composites were fabricated by vacuum bagging method and exhibited noteworthy improvements in mechanical properties. Comparative analysis with pristine samples revealed substantial enhancements, including a 15% increase in tensile strength, a remarkable 42% improvement in flexural strength, and a significant enhancement in mode-I fracture toughness by 65%. Furthermore, the cellulose paper interleaving played a crucial role in stabilizing fracture formation at the fiber-matrix interface, with mode II fracture toughness witnessing a 3% increase. Visual examination revealed the underlying toughening processes occurring in the interfacial area. This innovative approach of interleaving laminated composites with cellulose paper emerges as a sustainable and effective strategy, demonstrating the potential to fortify and toughen the interlaminar zones of CARALL composites. [ABSTRACT FROM AUTHOR]

AbstractThe present paper is the second of three, constituting a whole project of translation and commentary composed of translated extracts from the “Catalogo n. 2 – Le madri di tutte noi,” published by the Milan Women’s Bookstore in 1982. The idea for the project was conceived by Silvia Niccolai and Angela Condello, who selected the extracts and provide the written commentaries on the original texts. The Yellow Catalogue, in which we find collective discussions, pages of personal diaries and, overall, the enterprise of a group of women debating over their literary symbolic mothers (who to read? And why?), is an interesting example of political use of literature. After forty decades from its publication, it still proposes inspiring and fresh suggestions for feminist political action and critique, while representing an interesting occasion for researching the philosophical roots of Feminism. The projects is composed like follows: Paper No1, In search of a feminine symbolic, by Angela Condello, already published on Law & Litterature and Paper No2, From Novels to the Figures, themes and strategies for a political practice. Paper No 2 is structured in two parts. Part One is the article here presented (Part One. “Interest in Reality.” For every woman’s autobiography) written by Silvia Niccolai; Part Two is the article Sexual difference: an occasion for being, coauthored by Angela Condello and Silvia Niccolai, which will be published in a forthcoming issue of this Journal. [ABSTRACT FROM AUTHOR]

In this short response to the papers appearing in this special issue (Technology, AI Bots and Psychotherapy After Covid), psychotherapist and author Aaron Balick draws on the variety of themes that have arisen within the contributed papers to reflect on the wider issue of computer mediated human relations. In it he makes a distinction between the papers that focus on the therapeutic process mediated by technology and those that look more broadly at the paradigm of therapy practice in this context. Framing technology as a tool, the author pulls together both strands to explore what psychotherapy research may say about the broader issues of societies mediated by technology and how therapeutic research may contribute to these larger social issues. [ABSTRACT FROM AUTHOR]

This study investigated an under-researched source of measurement error in high-stakes examinations, namely mistakes in examination papers (e.g. multiple-choice questions containing more than one correct answer). Such mistakes (henceforth errors) are important, as they can undermine students’ performance in the examination, while also eroding public confidence in the examination system. In light of this, this study sought to understand what gives rise to such errors. To this end, it drew upon in-depth interviews with 36 assessment professionals with knowledge and experience of the examination paper construction process. Through illuminating the demands of the paper construction process and the characteristics of the people who are involved in it, this investigation identified a number of ‘active’ and ‘latent’ human failures that can lead to errors in examination papers. The article argues that, to minimise the risk of error in examination papers, efforts to ‘adapt’ people to the demands of the paper construction process should be carefully combined with efforts to adapt the paper construction process to people requirements. Apart from contributing new knowledge to the field, the study’s findings have also practical implications: examination providers can use them to optimise their paper construction processes to enhance the quality of their assessment instruments. [ABSTRACT FROM AUTHOR]

mHealth applications (apps) are tools that can enhance research by efficiently collecting and storing large amounts of data. However, data collection alone does not lead to change. Innovation and practice change occur through utilisation of evidence. The volume of data collected raises questions regarding utilisation of data by nurses and midwives, and how data from mHealth apps can be used to improve person-centred practice. There is limited empirical evidence and a lack of direction from global health authorities to guide nurses and midwives in this area. To describe strategies for nurses and midwives that could enhance the effective use of data generated by mHealth apps to inform person-centred practice. The purpose of this paper is to stimulate reflection and generate actions for data utilisation when using mHealth apps in nursing research and practice. This discussion paper has been informed by current evidence, the integrated-Promoting Action on Research Implementation in Health Services (i-PARIHS) framework, and research experience as part of doctoral study. Before engaging in data collection using mHealth apps, nurses and midwives would benefit from considering the nature of the evidence collected, available technological infrastructure, and staff skill levels. When collecting data and interpreting results, use of a team approach supported by engaged leadership and external facilitation is invaluable. This provides support to operate apps, and more importantly use the data collected to inform person-centred practice. This paper addresses the limited available evidence to guide nurses and midwives when using mHealth apps to collect and use data to inform practice change. It highlights the need for appropriate technology, external facilitative support, engaged leadership, and a team approach to collect meaningful evidence using mHealth apps. Clinicians, leaders, and researchers can apply the strategies provided to enhance the use of mHealth apps and ensure translation of evidence into practice. [ABSTRACT FROM AUTHOR]

This article investigates from the WPR approach how educational digitalization is discursively constructed in China by analysing how policy papers construct different kinds of subject positions for educators and the educated. The paper identifies non-coherences at two levels. First, digital technology is alternatively profiled as a solution and as a cause of problems. Second, the subjectivities ascribed to educational actors oscillate between opposing poles. Students are expected to be creative, critical thinkers and they are required to leave crucial decisions over what to learn to digital tools. Teachers are seen as deserving technological support in the handling of countless tasks, and they are presented as objects of distrust. Parents are portrayed as deficient beings in need of re-education and as influential players entitled to monitor students and teachers. This article reveals a particular Chinese style of governance which encourages self-management and imposes disciplinary techniques. [ABSTRACT FROM AUTHOR]

My comments concern the significant errors in the crystallographic part of the commented paper. The diffraction patterns are erroneously analysed and the final chemical composition is different than those supposed in the paper. There are also some manipulations with data. [ABSTRACT FROM AUTHOR]

We investigate two research questions using a recent statewide transition from paper to computer-based testing: first, the extent to which test mode effects found in prior studies can be eliminated; and second, the degree to which online and paper assessments offer different information about underlying student ability. We first find very small mode effects for a more recent transition in Massachusetts. Second, we investigate the predictive evidence of validity for paper and online tests for predictions of future test scores and grades. We generally find minimal differences for the extent to which scores on paper tests can differentially predict future online versus paper test scores. Finally, online and paper test scores are similarly predictive of future grade point average. We conclude that the online test penalty can vary substantially by test and that extreme care should be taken when administering online tests to some students and paper tests to others. [ABSTRACT FROM AUTHOR]

This paper investigates retracted articles indexed in the Scientific Electronic Library Online (SciELO) Brazil, using bibliometric techniques to identify the characteristics of these retractions and relevant citation trends. All records of retracted articles from the first record in October 2004 to April 2022 were included. Sixty-seven retractions and 870 citations pre- and post-retraction were analyzed. Results indicate a change of scenario that began in 2015, with recurrences of retracted articles allegedly produced by paper mills. The prevalence of retractions derived from professional misconduct in health research and the frequency of post-retraction citations in health sciences raise concerns in the chain of stakeholders, public health, and scientific development. [ABSTRACT FROM AUTHOR]

"Hitler Youth Quex: A Guide for the English-Speaking Reader" is a book by William Gillespie that explores the infamous propaganda film made during the early years of the Nazi regime. The book provides new insights into the film and its historical context, drawing from the author's extensive collection of German film materials. While the book primarily focuses on the German perspective, it offers valuable primary sources and encourages critical examination of the topic. It is recommended for scholars and students studying film history, propaganda, or German Third Reich cinema. [Extracted from the article]

This project interrogates the United States’ national fixation on the answer to the question: Who are you? In this article, it is posed that identity documentation practices arising out of the Chinese Exclusion Act era cast identity as an empirical and immutable phenomenon, specifically in response to the racialization of American-born Chinese settlers as duplicitous, through the mechanisms that information is collected, the actual information itself, and the cross-references or connections created between cases. Through tracing this lineage, racialized identification data is identified and theorized as part of hegemonic data regimes. [ABSTRACT FROM AUTHOR]

This article discusses how paper artisans in Chosŏn Korea transformed the once government-controlled paper production into their own prosperous trade, by focusing on their techniques for recycling paper. They called the paper they made that was not in use 'resting paper', and referred to its reuse, which they facilitated, as a process of 'returning'. These recycling techniques were unique even among its East Asian neighbours and induced new rules about paper production, including the careful accounting of 'resting paper' by government officials. This essay thus helps illuminate two things thus far less noted in the Chosŏn transformation of production: First, the prominent role of techniques in Chosŏn's productive revolutions (not best characterized as either 'industrial' nor 'industrious') before the twentieth century; and second, the constant negotiations that these recycling artisans had made with the Chosŏn court and its officials. The essay uses the robust recycled paper products still remaining in museums, and new kinds of documents about 'resting paper' and its constant transformers. [ABSTRACT FROM AUTHOR]

Sleep problems are the major reported consequence of working on shifts. The specificity of working on rotating shifts is not always captured by the instruments used in other samples. The Bergen Shift Work Seep Questionnaire (BSWSQ) is a self-report tool able to identify insomnia symptoms' presence and severity and distinguish differences by shift and rest days/vacations. The aim of the current study was to present preliminary psychometric properties of the European Portuguese version of the BSWSQ. Data from 569 shift workers in a Portuguese paper industry were collected and analysed. The results indicated good internal consistency and significant correlations among insomnia symptoms, depression, anxiety, and stress. The insomnia scores considering the various shifts were significant differents. Almost 63% of the shift workers were classified as having "shift-related insomnia". ROC analysis found optimal cut-offs for the presence of insomnia in each shift and rest days/vacations. A Confirmatory Factor Analysis showed excellent fit. The BSWSQ seems to be a measure with good psychometric properties, capable of evaluate the presence and severity of insomnia symptoms related to each shift. However, more studies are necessary, specifically with other shift-work samples. [ABSTRACT FROM AUTHOR]

The Journal of Critical Realism has issued a call for papers for a special issue on Morphogenetic Régulation (MR). MR is a theoretical and methodological framework that examines complex systemic transformations within contemporary capitalism. It builds on the Immanent Causality Morphogenetic Approach (ICMA) introduced by Knio in 2018, which combines Margaret Archer's Morphogenetic Analysis with Spinoza's concept of immanent causality. The call for papers invites contributions that apply MR to various themes and disciplines in the social sciences. The submission deadline for full papers is September 31, 2024, and all papers will undergo peer review. [Extracted from the article]

The recovery rate of paper products is a key factor in measuring the recyscling potential and the sustainability of the paper industry. Accurately measuring the recovery rate of paper products holds important theoretical and practical value. This paper took the non-recycling part and time factor into account and built the Koyck model to estimate the recovery rate, storage loss rate and recovery cycle of paper products. The model results showed that the recovery rate of Chinese paper products in 2017 increased to 58.05%, which was 10% higher than the results of methods that did not contain the non-recycling part or the time factor. The model results also showed that the storage loss rate of Chinese paper products was much higher than that of developed countries while the recovery cycle was close to the level of developed countries. The distribution analysis showed that the storage loss rate and recovery cycle of Chinese paper products varied significantly over time, which may be the result of policies and the change of consumption structure. It is suggested that the Chinese government should take measures to reduce the storage loss rate of paper products and enhance their recycling ability to achieve sustainable development. [ABSTRACT FROM AUTHOR]

A highly selective solid-state fluorescent sensor based on N-doped carbon quantum dots (N-CQDs) and cotton fiber paper (CFP) is reported for the determination of trace mercury (II)(Hg2+). The N-doped carbon quantum dots on cotton fiber paper (N-CQDs@CFP) was synthesized using a facile one-step microwave hydrothermal method. Multiple approaches were employed to fully investigate the morphology and chemical structure of the paper-based fluorescent sensor. The N-CQDs were chemically bonded onto the CFP, which offers good reproducibility and stability of the sensor. The N-CQDs@CFP showed high-intensity blue emission in dark-field imaging, and the fluorescence was quenched by Hg2+. The Hg2+ in aqueous samples was easily determined and visually monitored. There was good linearity from 0 to 250 μM, and the limit of detection was 34 nM. The paper-based fluorescent sensor provided accurate and rapid determination of Hg2+ upon comparison with flame atomic absorption spectrophotometry (FAAS). The simple preparation, rapid detection (< 5 min), low cost, and easy-handling illustrate that the reported sensor has a significant value in environmental monitoring. [ABSTRACT FROM AUTHOR]

Gender inequality is strongly linked with poor performance in science and mathematics for female students in secondary schools owing to socio-economic and cultural issues as well as learning strategies. According to the Certificate of Secondary Education Examination results of 2021 in Tanzania, the failure rate for female students was higher than that for male students, and such failure in chemistry was associated with inadequate knowledge about the tested concepts, failure to identify the requirements of the respective questions and lack of adequate mathematical skills. Real practical sessions are integral parts of chemistry to enhance the learning environments for both female and male students. However, the real laboratory practices especially for chemistry are challenged with the costs of the construction of physical laboratory infrastructure and reagents, and the time-consuming and physical demands on personnel during real practical sessions. Thus, this study explores gender-based effects of the chemistry virtual laboratory against a paper-based approach towards a real chemistry practical in Tanzanian secondary schools. The results indicate that the combined exposures of virtual laboratory and paper-based practicals improve real practical performance for both female and male students. Moreover, the performance of real practical practices progressively improved for female students when they were first exposed to the virtual laboratory and then the paper-based practical. Such improvements can be associated with the virtual laboratory providing interactive learning environments which support female students to connect and engage. [ABSTRACT FROM AUTHOR]

Time-limited exposure of electrode-free optically rewritable electronic paper is essential for applications, but performance characteristics can be modest. In this study we investigate whether image writer mode can improve kinetics of the photosensitive layer order parameter, which is described by the rotational diffusion model. The model that we developed allows adjusting the transmittance spectra of polarisers. We have found that fairly uniform transmittance spectra of polarisers enable to obtain competitive contrast ratio of 8:1 within 10 s of exposure. In comparison with the long-time exposure, the reflectance coefficient reduces by 24%. Computer-simulated image is consistent with the experimental observations. [ABSTRACT FROM AUTHOR]

Predictive maintenance strategies are becoming increasingly more important with the increased needs for automation and digitalization within pulp and paper manufacturing sector. Hence, this study contributes to examine the most efficient pre-processing approaches for predicting sensory data trends based on Gated Recurrent Unit (GRU) neural networks. To validate the model, the data from two paper pulp presses with several pre-processing methods are utilized for predicting the units' conditions. The results of validation criteria show that pre-processing data using a LOWESS in combination with the Elimination of discrepant data filter achieves more stable results, the prediction error decreases, and the predicted values are easier to interpret. The model can anticipate future values with MAPE, RMSE and MAE of 1.2, 0.27 and 0.30 respectively. The errors are below the significance level. Moreover, it is identified that the best hyperparameters found for each paper pulp press must be different. [ABSTRACT FROM AUTHOR]

AbstractOpenAI’s ChatGPT is an advanced large language model AI that has caused both excitement and concern in academia. TurnItIn and similar software programs are widely used in higher education to detect potential plagiarism. However, the extent to which such software can identify papers produced by ChatGPT remains unclear. The current study partially addressed this question by submitting five versions of short essays about criminological topics generated from ChatGPT to the TurnItIn software. Overall, the results indicated that TurnItIn adequately detected that the essays were not original works (mean percent plagiarized score = 31%). The analyses further illustrated that ChatGPT wrote at an exceedingly high level (mean Flesch-Kincaid Grade Level = 15.1) atypical of essays in higher education. Consequently, it appears that detection of AI-generated writing may be easier than initially assumed although the technology is bound to improve. Accordingly, possible strategies for approaching AI in higher education are proposed. [ABSTRACT FROM AUTHOR]

Fingermarks used in forensic investigation are biometric elements widely utilized in identification thanks to their unique and classifiable characteristics. Despite numerous studies investigating fingermark development on different surfaces, few studies have addressed the skin surface of deceased individuals, given the challenging nature of this substrate. This study investigated the transfer and development of fingermarks on human skin that had been systematically deposited over the forehead, neck, and wrist. Additionally, gender, age, and the time elapsed since deposition were issued as additional factors impacting fingermark development. Therefore, we prepared a study setting representing a crime scene by modelling the scene and then utilized 400 fingermarks. The marks transferred to thermal paper were developed by applying ThermaNin and magnetic black fingermark powder as fingermark development methods and then photographed. They were then evaluated for their suitability for identification via scoring and statistical analysis. The results indicated that 36% of all marks obtained from the skin of living persons and 66% of those from skin surfaces of dead bodies received the highest score and were assessed as suitable for identification. Despite the negative effect of increased time since deposition, it was revealed that the ThermaNin method yielded better results than magnetic black fingermark powder. [ABSTRACT FROM AUTHOR]

The following is a discussion of papers by Kozlowski and Lentz that explore the presence of mortality in the analytic relationship. The author reflects on challenges to the dyad, the vulnerability of the analyst, and how the individual and analytic pair may confront their existential reality separately or together. The author includes the idea of "death origin stories" to emphasize that mortality has a presence throughout the life of the individual; she suggests how psychoanalytic theory and technique may be enhanced by including an explanation of the earliest penetration of death into consciousness and whether this lens may enhance our sensitivity to mortality and our ability to manage loss and endings. [ABSTRACT FROM AUTHOR]