Search

In order to mitigate/prevent the risks of landslides, one of the essential tools that can be used to manage and plan the development of human settlements is landslide susceptibility. The two metaheuristic algorithms explored in this paper are the SCE and VSA algorithms used to optimize the artificial neural network (ANN) model. By integrating the two algorithms with the artificial neural network model, we try to determine its optimum computational parameters in order to generate the landslide susceptibility mapping for the Kurdistan province in Iran. Sixteen causative factors of landslides are included in the spatial database. The landslide susceptibility maps were generated in a GIS medium, and in order to evaluate the employed predictive models, the criterion of the area under the curve (AUC) was employed. This investigation includes 1072 landslide events, which are divided as follows: one-third as testing data and two-thirds as training data (i.e., a 75:25 ratio). The results indicate that after using the abovementioned algorithms, the AUC increased noticeably from 0.708 to 0.788 for SCE-MLP and from 0.744 to 0.818 for VSA-MLP in the training phase. The criterion of the area under the curve was utilized in order to evaluate the accuracy of the employed probabilistic models. Incidentally, the comparable AUCs calculated for the VSA-MLP testing databases and the obtained AUCs were 0.818, 0.801, 0.791, 0.786, 0.784, 0.778, 0.777, 0.776, 0.754 and 0.744, respectively for population size in training databases equal to 50, 350, 500, 150, 450, 200, 400, 300, 100 to and 250. Also, in case of SCE-MLP, the training and testing AUC were found (0.878, 0.865, 0.851, 0.850, 0.819, 0.816, 0.815, 0.781, 0.760, and 0.756) and (0.788, 0.782, 0.759, 0.744, 0.727, 0.720, 0.718, 0.713 and 0.708). The best fit for swarm size conditions of the SCE-MLP and VSA-MLP model showed 150 and 350, respectively. The acquired results indicate that the VSA-ANN model has a better predictive capability in optimization of the structure of the artificial neural network model and computational parameters in comparison with the SCE-ANN. [ABSTRACT FROM AUTHOR]

This study explores the intricate integration and synchronization of supplier selection with the optimal scheduling of multi-mode resource-constrained projects, which is a genuine and complex challenge prevalent in the construction industry, by proposing new multi-objective mathematical modeling considering various items. Within this context, a multifaceted network of concurrent projects (multi-project) is examined with different suppliers' resources (multi-supplier) to minimize the overall projects' delay times and associated costs. The mathematical model formulation also incorporates diverse implementation modes (multi-mode) and the time value of money (TVM). To use and unravel the complexities of the proposed model, two distinct algorithms, including a multi-objective whale optimization algorithm (WOA) based on the Pareto archive and the well-known non-dominated sorting genetic algorithm II (NSGA-II), are employed. The algorithms were subjected to a comparative analysis of several sample problems and evaluated against multi-objective criteria, including quality metric (QM), diversity metric (DM), spacing metric (SM), number of solutions (NOS), mean Ideal distance (MID), and computational time. The evaluation reveals that the tailored multi-objective WOA outperforms NSGA-II, exhibiting greater solution precision and diversity. The WOA demonstrates an enhanced ability to efficiently explore the problem's feasible solution space, albeit at the increased computational time to pinpoint optimal solutions. Notably, the validity and practicality of the proposed model and method were field-tested within the context of construction projects in Iran, with the obtained results juxtaposed against the real-world data. The comparative analysis indicates that implementing the scheduling approach and solution methodology espoused by the multi-objective WOA led to significant improvements, with financial gains of up to 6% and time savings reaching 16%. Overall, this research substantiates the proposed model and algorithms' benefits in reducing project costs and delays, offering valuable insights for construction industry practitioners. [ABSTRACT FROM AUTHOR]

In this study, the optimization of the location of oil production and injection wells, the number of production and injection wells, and the economic evaluation in the water injection process has been carried out using three algorithms: PSO, GA, and HGAPSO. Optimizing the oil extraction process by optimizing well locations, the optimal number of production and injection wells, and economic evaluation can improve the performance and efficiency of the process. In this study, the optimization of the water injection process into oil reservoirs using the PSO, GA, and HGAPSO algorithms has been addressed. Additionally, economic evaluation, considering costs and profits from oil production using the best-optimized parameters, has been conducted, and the best Net Present Value (NPV) has been calculated. Initially, the optimal well location problem is modeled, taking into account reservoir characteristics and geological conditions. Using the PSO and GA algorithms, the best well location and number of water injection wells have been obtained, leading to improved efficiency and cost reduction. Then, the GA algorithm is used to combine and modify viewpoints and optimize the number and location of wells. This algorithm explores optimal solutions in the well location space. Economic evaluation is performed using the best-optimized parameters by the algorithms. Costs of water injection, oil production costs, and profits from increased oil production are considered. By calculating the best Net Present Value (NPV), optimal decisions regarding the water injection process and enhancing the performance of oil reservoirs are made. Simulation results indicate that the GA algorithm outperforms other algorithms and can be used as a robust and effective method for optimizing well locations and the number of production and injection wells in the oil injection process. Ultimately, this study assists the oil industry in making better decisions about optimizing water injection and improving the efficiency and profitability of the process using the introduced optimization algorithms. [ABSTRACT FROM AUTHOR]

Coastal aquifer vulnerability assessment (CAVA) studies are essential for mitigating the effects of seawater intrusion (SWI) worldwide. In this research, the vulnerability of the coastal aquifer in the Lahijan region of northwest Iran was investigated. A vulnerability map (VM) was created applying hydrogeological parameters derived from the original GALDIT model (OGM). The significance of OGM parameters was assessed using the mean decrease accuracy (MDA) method, with the current state of SWI emerging as the most crucial factor for evaluating vulnerability. To optimize GALDIT weights, we introduced the biogeography-based optimization (BBO) and gray wolf optimization (GWO) techniques to obtain to hybrid OGM-BBO and OGM-GWO models, respectively. Despite considerable research focused on enhancing CAVA models, efforts to modify the weights and rates of OGM parameters by incorporating deep learning algorithms remain scarce. Hence, a convolutional neural network (CNN) algorithm was applied to produce the VM. The area under the receiver-operating characteristic curves for OGM-BBO, OGM-GWO, and VMCNN were 0.794, 0.835, and 0.982, respectively. According to the CNN-based VM, 41% of the aquifer displayed very high and high vulnerability to SWI, concentrated primarily along the coastline. Additionally, 32% of the aquifer exhibited very low and low vulnerability to SWI, predominantly in the southern and southwestern regions. The proposed model can be extended to evaluate the vulnerability of various coastal aquifers to SWI, thereby assisting land use planers and policymakers in identifying at-risk areas. Moreover, deep-learning-based approaches can help clarify the associations between aquifer vulnerability and contamination resulting from SWI. [ABSTRACT FROM AUTHOR]

Predicting groundwater level (GWL) fluctuations, which act as a reserve water reservoir, particularly in arid and semi-arid climates, is vital in water resources management and planning. Within the scope of current research, a novel hybrid algorithm is proposed for estimating GWL values in the Tabriz plain of Iran by combining the artificial neural network (ANN) algorithm with newly developed nature-inspired Coot and Honey Badger metaheuristic optimization algorithms. Various combinations of meteorological data such as temperature, evaporation, and precipitation, previous GWL values, and the month and year values of the data were used to evaluate the algorithm's success. Furthermore, the Shannon entropy of model performance was assessed according to 44 different statistical indicators, classified into two classes: accuracy and error. Hence, based on the high value of Shannon entropy, the best statistical indicator was selected. The results of the best model and the best scenario were analyzed. Results indicated that value of Shannon entropy is higher for the accuracy class than error class. Also, for accuracy and error class, respectively, Akaike information criterion (AIC) and residual sum of squares (RSS) indexes with the highest entropy value which is equal to 12.72 and 7.3 are the best indicators of both classes, and Legate-McCabe efficiency (LME) and normalized root mean square error-mean (NRMSE-Mean) indexes with the lowest entropy value which is equal to 3.7 and − 8.3 are the worst indicators of both classes. According to the evaluation best indicator results in the testing phase, the AIC indicator value for HBA-ANN, COOT-ANN, and the standalone ANN models is equal to − 344, − 332.8, and − 175.8, respectively. Furthermore, it was revealed that the proposed metaheuristic algorithms significantly improve the performance of the standalone ANN model and offer satisfactory GWL prediction results. Finally, it was concluded that the Honey Badger optimization algorithm showed superior results than the Coot optimization algorithm in GWL prediction. [ABSTRACT FROM AUTHOR]

Optimizing resource utilization and train scheduling is essential to satisfy passengers and reduce operating costs. This study develops the train schedule under scenario-oriented stochastic conditions. The proposed approach is a multi-objective mathematical-based mixed integer linear programming (MILP) approach; the objective is to minimize the average passenger expectation and the total number of train operation cycles. The non-dominated sorting genetic algorithm (NSGA-II) has been developed with multi-crossover and multi-mutation operators, then hybrid with simulating annealing (SA) operator (NSGA-II-SA). The model with four meta-heuristic algorithms has been technically analyzed. In a case study, the train schedule in the double-track rail network of the Tehran–Mashhad railway of Iran has been compared with the golden point. Experimental results show that a proposed approach can suitably fit the problem considering important metrics with an improvement of %7.34 and %6.89 for the average passenger waiting time and the total number of train operation cycles, respectively. [ABSTRACT FROM AUTHOR]

Due to the complex nature of processing units and the variability in raw oil properties, traditional first-principle methods are not always effective in predicting the output of these units without adapting them. Data-driven models have become popular alternatives because they are more adaptable to the variability in processing units, especially when large amounts of data are available. Feature selection is a crucial aspect of data-driven modeling, especially for processing units. It involves identifying and selecting the most important variables influencing the unit's output. The selected variables are then used as inputs to the model, which helps to reduce noise and improve model accuracy. Accordingly, this article presents a hybrid method that combines feature selection with data-driven modeling to create an accurate model for predicting the output of a Residue Fluid Catalytic Cracking (RFCC) process unit. The Metaheuristic Ant Colony Optimizer (MACO) algorithm was used to extract the best subset of features from the collected data, which were then used with the Artificial Immune Genetic Algorithm with Local Vaccination (AIGA-LV) method to select the optimal features. Finally, the Random Forest (RF) method was used to predict the products of the RFCC process unit. The data were collected from a refinery plant in central Iran for nine months. The proposed model was efficient in feature selection and flexible in handling different scenarios and products. It improved the accuracy to 99.17% at its best and improved the primary model by 3–20%. Therefore, this method could be useful for predicting the output of various industrial processes, especially the RFCC and FCC process units. [ABSTRACT FROM AUTHOR]

Reservoirs are crucial for water storage, flood control, and electricity generation. At the same time, evaporation in dam reservoirs causes water losses. This study evaluates the effect of weather conditions on the prediction of evaporation from the dam reservoir, and there are several developed models to predict evaporation under different scenarios. Using the deep neural network model long short term memory (LSTM) with a series of modern meta-heuristic algorithms, the present research aims to achieve an acceptable accuracy on weather parameters. The present study investigates the ability of the LSTM deep neural network and meta-heuristic algorithms of Artificial Bee Colony (ABC), Horse Herd Optimization (HOA), and Marine Predators (MPA) to develop an evaporation rate forecasting model for a tropical area in the Dez Dam reservoir, Khuzestan province, Iran. To investigate the effect of different input variable patterns on the prediction accuracy of the case model, twenty-eight scenarios were investigated for the input architecture along with the LSTM model and its combination with meta-heuristic algorithms. The models include ABC-LSTM, LSTM-HOA, and LSTM-MPA, respectively. The results showed that the combined LSTM-MPA model with RMSE, MAE, KGE, and WI evaluation criteria equal to 81.926 mm/month, 53.684 mm/month, 0.850, and 0.816, respectively, performs better than other meta-heuristic models. The examined deep meta-heuristic models are suggested for predicting evaporation from the Dez dam reservoir with limited information because the results show that they have more appropriate prediction capability than the LSTM Model. [ABSTRACT FROM AUTHOR]

Precipitation is a key constituent of the water cycle and its accurate measurement is essential for a wide range of hydroclimatic studies. Although advances in technology have provided new sources of precipitation data (e.g., satellite data), gauge measurements are still considered as the most reliable source of information. Accuracy of ground measurements highly depends on the network density and positions of the rain gauges and thus, many studies have attempted to re-design the rain gauge networks around the globe. This is while, a limited number of researches have investigated the potential of utilizing global gridded precipitation products in network optimization context. In this study, a two-step framework was proposed to remove redundant rain gauge stations of the Central Plateau watershed of Iran. In the first step, number of excess rain gauges was detected based on transinformation–distance (T–D) analysis. In the second step, exact location of the extra rain gauges was determined through high degree of freedom and low degree of freedom (LDF) scenarios by a combination of harmony search optimization algorithm and a geostatistical model. According to the results, 58 out of 580 rain gauges were detected to be removed. Results of the proposed scenarios differed in detecting 13 out of 58 gauges. While LDF scenario required less computational time, network re-designed by this scenario was about 32% less accurate than the other scenario. Performance of the both optimized networks was equally similar to the initial network in terms of developing precipitation rasters. [ABSTRACT FROM AUTHOR]

Developing a susceptibility map is a crucial primary step for dealing with undesirable natural phenomena, gully erosion included. On the other hand, recent computational progress call for employing new methodologies to keep the solutions updated. In this work, the performance of a conventional artificial neural network (ANN) is improved by applying a metaheuristic algorithm (symbiotic organisms search—SOS) for generating the gully erosion susceptibility map of an area in Golestan Province, Northern Iran. A geo-database is created from the gully erosion inventory and twenty conditioning factors. After analyzing the interrelated relationships between the geo-database components, training and testing data sets are formed. The models are executed with proper configurations and according to the results, the SOS algorithm could enhance the training accuracy of the ANN from 92.8% to 98.4%, and testing accuracy from 89.8% to 91.4%. In addition, comparing the performance of the SOS with shuffled complex evolution (SCE-NN) and electromagnetic field optimization (EFO-NN) algorithms revealed the greater accuracy of the SOS. However, the SCE-NN and EFO-NN performed more accurately than conventional ANN. Therefore, it can be concluded that the use of metaheuristic techniques may improve the prediction ability of the ANN in gully erosion susceptibility mapping. Finally, a monolithic equation is extracted from the SOS–ANN model to be used as a predictive formula for similar purposes. [ABSTRACT FROM AUTHOR]

Access to sufficient and safe water particularly in vulnerable countries is one of the most important goals targeted by the United Nations for 2030. The agricultural water supply is crucial in arid areas such as Iran. In water supply projects, employers usually seek less duration and cost, and higher quality, however, contractors seek a reduction of fluctuations in project resources, especially human resources, and these goals may be in conflict with each other. Therefore, finding an optimal project schedule considering different project objectives is vital for managers to achieve stakeholders' satisfaction. In this study, the four main project objectives including time, cost, quality, and resource leveling as well as the activity dependencies and resource constraints are addressed through fuzzy optimization. The proposed model was first implemented on a small-sized project instance for validation; then, the model was solved by the Nondominated Sorting Genetic (NSGA-II) and Multi-objective Particle Swarm Optimization algorithms using the information of a real-world agricultural water supply project. The results of the first Pareto set for different alpha-cuts in relation to the fuzzy quality factor show a set of solutions and different alternatives for project implementation which leads to a number of execution modes each of which may result in achieving the project objectives. Finally, the most ideal solution with a duration of 178 days was selected using the fuzzy TOPSIS method. The findings demonstrate the validity of the proposed model concerning the needs of agricultural water supply organizations. [ABSTRACT FROM AUTHOR]

Hydrometric stations are important in most countries because of the application and importance of the data obtained from these stations. It is necessary to choose the best place for their establishment according to the cost of constructing hydrometric stations. The aim and innovation of this research are to optimize the location of hydrometric stations using Bat's meta-heuristic algorithm and interpolation methods, which information transfer entropy theory and Bat's algorithm were used to maximize the average amount of information transfer entropy. For this purpose, the data of 43 hydrometric stations of Karkheh basin in western Iran in period of 1991–2015 were used. In this research, two scenarios were investigated in order to improve the entropy of information transmission between stations. In the first scenario, using the kriging method to prepare the flow distribution map in the region and choosing normal kriging with spherical variogram as the best model to fit the average annual flow data and using the Bat algorithm to increase the correlation coefficient between the data and assuming no none of the available stations, 43 points were used to redeploy stations with higher average entropy in the region. The results of this scenario showed the concentration of new stations in the central and eastern areas of the basin. In the second scenario, the amount of entropy of information transfer at the regional level was calculated and 18 potential points were recommended for the establishment of new stations. The obtained variogram for the discharge of the basin showed that the range of influence is low and it is necessary to establish the stations at a close distance. [ABSTRACT FROM AUTHOR]

In this paper, a new responsive-green-cold vaccine supply chain network during the COVID-19 pandemic is developed for the first time. According to the proposed network, a new multi-objective, multi-period, multi-echelon mathematical model for the distribution-allocation-location problem is designed. Another important novelty in this paper is that it considers an Internet-of-Things application in the COVID-19 condition in the suggested model to enhance the accuracy, speed, and justice of vaccine injection with existing priorities. Waste management, environmental effects, coverage demand, and delivery time of COVID-19 vaccine simultaneously are therefore considered for the first time. The LP-metric method and meta-heuristic algorithms called Gray Wolf Optimization (GWO), and Variable Neighborhood Search (VNS) algorithms are then used to solve the developed model. The other significant contribution, based on two presented meta-heuristic algorithms, is a new heuristic method called modified GWO (MGWO), and is developed for the first time to solve the model. Therefore, a set of test problems in different sizes is provided. Hence, to evaluate the proposed algorithms, assessment metrics including (1) percentage of domination, (2) the number of Pareto solutions, (3) data envelopment analysis, and (4) diversification metrics and the performance of the convergence are considered. Moreover, the Taguchi method is used to tune the algorithm's parameters. Accordingly, to illustrate the efficiency of the model developed, a real case study in Iran is suggested. Finally, the results of this research show MGO offers higher quality and better performance than other proposed algorithms based on assessment metrics, computational time, and convergence. [ABSTRACT FROM AUTHOR]

Unsupervised clustering methods are used as data-driven models for mapping of mineral prospectivity (MPM). One of the challenging problems for modeling high potential mineral prospects using these algorithms is to select proper cluster centroids in order to locate the same geospatial objects into reasonable clusters. To overcome this kind of problems arise from traditional clustering algorithms (e.g. K-means), the combination of harmony search (HS) and artificial bee colony (ABC) metaheuristic optimization algorithms with K-means have been firstly developed in this study which can be used for selection of optimum cluster centroids for highlighting favorable targets in prospecting stage of mineral explorations. This stage is critically important for exploration of undiscovered mineral deposits, because the time and cost are two substantial factors in regional-scale exploration programs. This study stated that the applying hybrid data-driven clustering models (e.g., HS-KM and ABC-KM) are operational tools for identifying high-favorable areas linked to porphyry Cu systems in prospecting stage. Moreover, the results demonstrated that the properly selection of geospatial exploration features has strong impact on the modeling of mineral prospectivity in Kerman porphyry belt, Iran and cause significant decrease in systemic uncertainty linked to MPM. [ABSTRACT FROM AUTHOR]

There is increasing attention to the sustainable development of supply chain (SC) and reverse logistics (RL) in the contemporary competitive economy, notably in the food sector, by scholars and stakeholders. This study investigates a sustainable closed-loop supply chain (CLSC) for fish due to its high value in the family food basket, its perishability, and the importance of waste product recycling. A multi-objective mathematical model is developed under uncertainty and sustainability criteria to optimize production rates with the aim of better distribution among different demand markets, total costs, social issues, and negative environmental effects (e.g., CO2 emissions and unused/waste products). A combination of exact, meta-heuristic, and hybrid meta-heuristic algorithms are used to solve the suggested model. Then, the optimal solutions are found using the Taguchi method by evaluating the best initial replies. The solutions are evaluated based on various performance metrics. The analysis of variance (ANOVA) and the "filtering/displaced ideal solution" methods determine the best solution approach. Moreover, a case study with a trout CLSC in Northern Iran is examined. In addition, the Lingo software utilizes the ε-constraint method to evaluate and check the performance of the algorithms under different levels of uncertainty. Finally, sensitivity analyses are carried out to confirm the efficacy of the proposed algorithms. The findings demonstrate the proposed network's outstanding consistency with the algorithms used and its application and efficiency. [ABSTRACT FROM AUTHOR]

Flyrock is known as one of the main problems in open pit mining operations. This phenomenon can threaten the safety of mine personnel, equipment and buildings around the mine area. One way to reduce the risk of accidents due to flyrock is to accurately predict that the safe area can be identified and also with proper design of the explosion pattern, the amount of flyrock can be greatly reduced. For this purpose, 14 effective parameters on flyrock have been selected in this paper i.e. burden, blasthole diameter, sub-drilling, number of blastholes, spacing, total length, amount of explosives and a number of other effective parameters, predicting the amount of flyrock in a case study, Songun mine, using linear multivariate regression (LMR) and artificial intelligence algorithms such as Gray Wolf Optimization algorithm (GWO), Moth-Flame Optimization algorithm (MFO), Whale Optimization Algorithm (WOA), Ant Lion Optimizer (ALO) and Multi-Verse Optimizer (MVO). Results showed that intelligent algorithms have better capabilities than linear regression method and finally method MVO showed the best performance for predicting flyrock. Moreover, the results of the sensitivity analysis show that the burden, ANFO, total rock blasted, total length and blast hole diameter are the most significant factors to determine flyrock, respectively, while dynamite has the lowest impact on flyrock generation. [ABSTRACT FROM AUTHOR]

Schools as social bases and children's centers are among the most vulnerable areas to flooding. Flood susceptibility mapping is very important for flood preparedness and adopting preventive plans for reducing the school vulnerability to flooding. To achieve this, there is a need for the models that can be used in vast areas with high predictive accuracy. This study aims to develop the innovative hybrid models by coupling the support vector regression (SVR), statistical approaches, and two meta-heuristic algorithms, whale optimization algorithms (WOA) as well as grey wolf optimizer (GWO). According to the proposed methodology, a hybrid feature of SVR and frequency ratio (FR-SVR) is optimized by applying the GWO and WOA optimization algorithms to generate the maps related to flood susceptibility. The method was utilized for the Ardabil Province located in southwestern Caspian Sea precincts of which faced devastating floods. The GIS database including 147 ground control locations of flooded zones and nine factors which influence flood were utilized to learn and ascertain the validity of the models. Three statistical metrics namely, mean absolute error (MAE), root mean square error (RMSE), and the area under the receiver operating characteristic curve (AUC) were computed for the developed models in order to estimate prophetically. The results indicated that the meta-optimized FR-SVR-GWO as well as FR-SVR-WOA models exceeded the FR-SVR and FR models in training (RMSEFR-SVR-WOA = 0.2016, RMSEFR-SVR-GWO = 0.1885, AUCFR-SVR-WOA = 0.87, AUCFR-SVR-GWO = 0.88) and validation (RMSEFR-SVR-WOA = 0.2025, RMSEFR-SVR-GWO = 0.1986, AUCFR-SVR-WOA = 0.87, AUCFR-SVR-GWO = 0.87) phases. The FR-SVR-WOA and FR-SVR-GWO models were very competitive regarding AUC and RMSE values, but the FR-SVR-WOA model reproduced greater flood susceptibility rates and was considered for identifying vulnerability of schools to flood events. To this end, number of schools, number of students in each school, and the area of the school building were taken into account to generate the vulnerability map. The results demonstrated that schools with the highest and lowest vulnerability to flooding were mostly located in southeastern and central parts of the Ardabil Province, respectively. [ABSTRACT FROM AUTHOR]

Today, according to the occurrence of numerous disasters in allover over the world, designing the proper and comprehensive plan for relief logistics has received a lot of attention from crisis managers and people. Besides, considering resilience capability along with operational and disruption risks leads to the robustness of the humanitarian relief chain (HRC), and this comprehensive framework ensures the essential supplies delivery to the beneficiaries and is close to real-world problems. The resilience parameters used for the second objective are obtained by a strong Best Worst Method (BWM). Another supposition of the model is the consideration of uncertainty in all stages of the proposed problem. Moreover, the multiple disasters (sub-sequent minor post disasters) which can increase the initial demand are considered. Furthermore, the proposed model is solved using three well-known metaheuristic algorithms includes non-dominated sorting genetic algorithm (NSGA-II), network reconfiguration genetic algorithm (NRGA), and multi-objective particle swarm optimization (MOPSO), and their performance is compared by several standard multi-objective measure metrics. Finally, the obtained results show the robustness of the proposed approaches, and some directions for future researches are provided. [ABSTRACT FROM AUTHOR]

Precise prediction of water quality parameters plays a significant role in making an early alert of water pollution and making better decisions for the management of water resources. As one of the influential indicative parameters, electrical conductivity (EC) has a crucial role in calculating the proportion of mineralization. In this study, the integration of an adaptive hybrid of differential evolution and particle swarm optimization (A-DEPSO) with adaptive neuro fuzzy inference system (ANFIS) model is adopted for EC prediction. The A-DEPSO method uses unique mutation and crossover processes to correspondingly boost global and local search mechanisms. It also uses a refreshing operator to prevent the solution from being caught inside the local optimal solutions. This study uses A-DEPSO optimizer for ANFIS training phase to eliminate defects and predict accurately the EC water quality parameter every month at the Maroon River in the southwest of Iran. Accordingly, the recorded dataset originated from the Tange-Takab station from 1980 to 2016 was operated to develop the ANFIS-A-DEPSO model. Besides, the wavelet analysis was jointed to the proposed algorithm in which the original time series of EC was disintegrated into the sub-time series through two mother wavelets to boost the prediction certainty. In the following, the comparison between statistical metrics of the standalone ANFIS, least-square support vector machine (LSSVM), multivariate adaptive regression spline (MARS), generalized regression neural network (GRNN), wavelet-LSSVM (WLSSVM), wavelet-MARS (W-MARS), wavelet-ANFIS (W-ANFIS) and wavelet-GRNN (W-GRNN) models was implemented. As a result, it was apparent that not only was the W-ANFIS-A-DEPSO model able to rise remarkably the EC prediction certainty, but W-ANFIS-A-DEPSO (R = 0.988, RMSE = 53.841, and PI = 0.485) also had the edge over other models with Dmey mother in terms of EC prediction. Moreover, the W-ANFIS-A-DEPSO can improve the RMSE compared to the standalone ANFIS-DEPSO model, accounting for 80%. Hence, this model can create a closer approximation of EC value through W-ANFIS-A-DEPSO model, which is likely to act as a promising procedure to simulate the prediction of EC data. [ABSTRACT FROM AUTHOR]

Mechanical properties of carbonate rocks (elasticity modulus (E) and uniaxial compressive strength (UCS)) are important properties in tunneling, rock excavation and rock drilling blasting. Determination of these parameters using testing rock cores is almost difficult due to the discontinuities presence and it requires well-prepared cylindrical core samples. In addition, the testing procedure is expensive and time consuming. Thus, indirect tests are often utilized to evaluate the mechanical properties. In this research, a new technique for data processing called support vector regression (SVR) improved by metaheuristic algorithms (harmony search (HS), grey wolf optimizer (GWO), cuckoo search (CS), dolphin echolocation (DE) and genetic algorithm (GA)) to estimate of mechanical properties of carbonate rocks from physical properties and petrographic characteristics is applied. The techniques were employed in an open access literature. (case study: Koohrang's third tunnel path, Iran). In these techniques, petrographic characteristics (allochem percent, carbonate percent, dolomite percent and grain size) and physical properties (saturated unit weight (γsat), S-wave velocity (Vs), dry unit weight (γd), P wave velocity (Vp)) were used as the inputs, while the mechanical properties of carbonate rocks were the outputs. Different performance concepts were used to compare the prediction models performance. The outcomes obtained show that the SVR-HS technique has robust potential for the prediction of mechanical properties of carbonate rocks based on physical properties and petrographic characteristics with high accuracy. [ABSTRACT FROM AUTHOR]

Monitoring and assessment of groundwater quality (GWQ) as an important freshwater source for drinking purposes in urban and rural regions of developing countries due to rapidly increasing contamination is one of the concerns of water managers. Therefore, developing an efficient intelligent model for analyzing GWQ could help hydro-environmental engineers for sustainable water supply. The current research investigated the applicability of a novel nature-inspired optimization algorithm hybridized with multi-layer perceptron artificial neural network based on gray wolf optimization (GWO) for estimating dissolved oxygen (DO) total dissolved solid (TDS) and turbidity parameters at Asadabad Plain, Iran, and results are compared with the stand-alone multi-layer perceptron artificial neural network (MLPANN), generalized regression neural network (GRNN), and multiple linear regression (MLR) approaches. Evaluation of performance of models is carried out using various statistical indices like relative root mean square error, Nash-Sutcliffe efficiency, and correlation coefficient. Based on the results obtained, it is found that the hybrid GWO-MLPANN is a beneficial GWQ forecasting tool in accordance to high performance accuracy. Also, the study found that the superiority of the applied meta-heuristic algorithm (GWO) in improving the performance accuracy of the stand-alone artificial intelligence techniques in modeling the GWQ parameters. [ABSTRACT FROM AUTHOR]

As a frequent natural disaster, landslides incur significant economic and human losses worldwide. The main idea of this paper is to propose novel integrative models for landslide susceptibility evaluation in a prone area of Chaharmahal va Bakhtiari Province in Iran. To do this, four metaheuristic techniques, namely chimp optimization algorithm (ChOA), crow search algorithm (CSA), satin bowerbird optimization (SBO), and water cycle algorithm (WCA) are used to supervise the training of an artificial neural network (ANN). A spatial database is created by 170 historical landslides and 14 most common conditioning factors. The models are optimized in terms of hyper-parameters and elite ones are then used to produce the susceptibility maps. During the training phase, all models could acquire a reliable understanding of the landslide pattern. The obtained accuracy index of area under the receiving operating characteristic curve (AUROC) showed that the maps produced by the WCA-ANN (AUROC = 0.925) and SBO-ANN (AUROC = 0.900) are more accurate than those of the ChOA-ANN (AUROC = 0.851) and CSA-ANN (AUROC = 0.855). Considering this assessment, the suggested hybrid models are reliable enough for landslide susceptibility modeling. Accordingly, the generated susceptibility map can be used for urban planning and generating alert systems over the studied area. [ABSTRACT FROM AUTHOR]

In the present study, for the first time, a new framework is used by combining metaheuristic algorithms, decomposition and machine learning for flood frequency analysis under climate-change conditions and application of HadCM3 (A2 and B2 scenarios), CGCM3 (A2 and A1B scenarios) and CanESM2 (RCP2.6, RCP4.5 and RCP8.5 scenarios) in global climate models (GCM). In the proposed framework, Multivariate Adaptive Regression Splines (MARS) and M5 Model tree are used for classification of precipitation (wet and dry days), whale optimization algorithm (WOA) is considered for training least square support vector machine (LSSVM), wavelet transform (WT) is used for decomposition of precipitation and temperature, LSSVM-WOA, LSSVM, K nearest neighbor (KNN) and artificial neural network (ANN) are performed for downscaling precipitation and temperature, and discharge is simulated under present period (1972–2000), near future (2020–2040) and far future (2070–2100). Log normal distribution is used for flood frequency analysis. Furthermore, analysis of variance (ANOVA) and fuzzy method are employed for uncertainty analysis. Karun3 Basin, in southwest of Iran, is considered as a case study. Results indicated that MARS performed better than M5 model tree. In downscaling, ANN and LSSVM_WOA slightly outperformed other machine learning algorithms. Results of simulating the discharge showed superiority of LSSVM_WOA_WT algorithm (Nash-Sutcliffe efficiency (NSE) = 0.911). Results of flood frequency analysis revealed that 200-year discharge decreases for all scenarios, except CanESM2 RCP2.6 scenario, in the near future. In the near and far future periods, it is obvious from ANOVA uncertainty analysis that hydrological models are one of the most important sources of uncertainty. Based on the fuzzy uncertainty analysis, HadCM3 model has lower uncertainty in higher return periods (up to 60% lower than other models in 1000-year return period). [ABSTRACT FROM AUTHOR]

Purpose: The main purpose of this study was to evaluate the use of an integrated life cycle assessment (LCA), artificial neural network, and metaheuristic optimization model to improve the sustainability of tomato-based cropping systems in Iran. The model outputs the combination of input usage in a tomato cropping system, which leads to the highest economic output and the least environmental impact. Methods: The LCA inventory was created using data from 114 open-field tomato farms in the Alborz Province of Iran during one growing period in 2015. Among all management components, the main focus was on irrigation management systems. The optimization problem was designed by integrating three indicators: carbon footprint (CF), benefit-cost ratio (BCR), and energy use efficiency (EUE) as the objective of field tomato production. The functional unit was 1 kg of tomato aligned with the system boundary of the cradle to market life cycle. Three artificial neural networks (ANNs) were applied to model relationships between the inputs and three indices (CF, BCR, and EUE) as the objective functions. Multi-objective genetic algorithm (MOGA) and multi-objective particle swarm optimization (MOPSO) were used to minimize the CF and maximize the BCR and EUE indicators. The abovementioned aims have been pursued by developing codes in MATLAB software. Results and discussion: CF, BCR, and EUE were calculated to be 0.26 kg CO2−eq (kg tomato)−1, 1.8, and 0.5, respectively. MOGA results envisage the possibility of an increase of 86% and 50% in the EUE and BCR and a 43% reduction in the CF of tomato production systems. Moreover, EUE and BCR increased by 83% and 49%, and CF was reduced by 39% from the optimum results obtained from the MOPSO algorithm. It was revealed that in order to optimize field tomato production with the target objectives of this study, a large additional use for irrigation pipes, plastic, and machinery in comparison to current situation is required, while a large reduction of biocide, chemical fertilizer, and electricity consumption is indispensable. Conclusions: According to the results of our study, it was concluded that the optimal solutions require a modernization of irrigation systems and a decrease in the consumption of chemical fertilizers and pesticides. The implementation of management options for such solutions is discussed. [ABSTRACT FROM AUTHOR]

The direct measurement of uniaxial compressive strength (UCS) as one of the main important rock engineering parameters is destructive, cumbersome, difficult and costly. Therefore, the prediction of this parameter using simpler, cheaper indirect methods is of interest. In this paper, the UCS was predicted using a developed hybrid intelligent model including generalized feedforward neural network (GFFN) incorporated with imperialist competitive algorithm (ICA). To find the optimum model, 197 sets including rock class, density, porosity, P-wave velocity, point load index and water absorption from almost all over quarries of Iran were compiled. The efficiency and performance of GFFN and hybrid ICA-GFFN models subjected to different error criteria and established confusion matrixes were compared to multilayer perceptron (MLP) and radial basis function (RBF) neural network models as well as conducted multivariate regression. The hybrid ICA-GFFN with 11.37%, 14.27% and 22.74% improvement in correct classification rate over than GFFN, RBF and MLP demonstrated superior predictability level. The results indicated that the developed ICA-GFFN model as a feasible and accurate enough tool can effectively be applied for UCS prediction purposes. Using the sensitivity analyses, the P-wave velocity and rock class were identified as the most and least influences factors on predicted UCS. [ABSTRACT FROM AUTHOR]

During the past few decades, many researchers have studied the issue of air travel demand in different countries. On the other hand, the development of airports requires considerable space in the vicinity of cities which needs planning and huge investment. However, development of air travel through different airports will be affected by various factors such as population growth and economic development. The purpose of this study is to predict air travel demand in Iran. Data were provided by the Civil Aviation Organization of Islamic Republic of Iran from 2011 to 2015. Collected information includes airports of the country and destination cities all across the country. For this purpose, the artificial neural network (ANN) is used to predict the air travel demand by considering income elasticity and population size in each zone. Evolutionary meta-heuristic algorithms have been implemented in order to improve the performance of ANN. Bat and Firefly algorithms are new meta-heuristic algorithms which have been examined in this study. The results show that the use of these algorithms increases adaptation rate of neural network (NN) prediction with real data. The coefficient of determination increases from 0.2 up to about 0.9 while using the meta-heuristics NN. This represents the high rate of efficiency using this new method. [ABSTRACT FROM AUTHOR]