Search

This work presents the results of a transdisciplinary analysis performed on Harward's Almanac (Dublin, 1666), an extremely rare volume currently housed in the National Library of Ireland. The uniqueness and historical value of the Almanac is related to the presence of nineteen handwritten poems, entered by an anonymous scribe. These record textually important English clandestine satire circulating anonymously in Dublin in the late seventeenth and early eighteenth century. Following a comprehensive historical assessment, it appeared evident that the current order of leaves was incorrect. To reconstruct the correct order of the leaves, and hence the likely sequence in which the manuscript poems were inscribed, this study employed a codicological/paleographic analysis complemented by analytical (X-ray fluorescence, XRF) and statistical (Self Organizing Map, SOM) investigation. Specifically, point XRF analysis was carried out for each handwritten page of the Almanac, allowing identification of ink elemental compositions (iron-based ink) and successfully supporting the validity of historical hypotheses on the poems' order of inscription. The statistical organization of XRF data by SOMs allowed easy bi-dimensional visualization of the data set (54 points) and identification of ink similarities, once more validating the historical assessment. [ABSTRACT FROM AUTHOR]

Plant-fibre ancient-books with cultural significance should be protected from moisture and pollution. In this work, a strategy of surface in-situ protection (building composite coating) was adopted to achieve good hydrophobicity, moisture-proofness and ink-contamination resistance at the surface of archaistic paper. By pre-ring opening of epoxy-based poly(vinyl silsesquioxane) (POSS) and spray of POSS/polyvinylidene fluoride (PVDF) mixed solution, in-situ construction of POSS/PVDF composite coating at the surface of ancient paper was achieved. Compared to water-absorbing ancient paper, POSS/PVDF co-modified ancient paper shows strong humidity resistance. The surface of co-modified ancient paper (epoxy-group pre-ring opening for 45 min) displays high hydrophobicity (water contact angle of ~142.6°), ascribed to greatly improved surface roughness of paper fibres as well as complete coverage of high-content Si/F elements on fibre surface. POSS-modified and neat ancient-paper materials show surface water contact angles of ~113.9° and 0°, respectively. Robust ink-resistance of POSS/PVDF co-modified ancient-paper surface is realized. The innovation in this work lies in perfect synergy of cage-shaped POSS and threadlike PVDF in coating. This work might open a way for surface nondestructive-protection to ancient-books for damp-proof, hydrophobic and anti-fouling characteristics. [ABSTRACT FROM AUTHOR]

This study applied various scientific analyses to one fragment of paper and three pigments excavated from earthenware found in the Hoeamsa Temple site at Yangju, Korea, which is believed to have been built in the early twelfth century. Radiocarbon dating of the paper fragment suggests a manufacture date between 1460 and 1646 (at a 95% confidence interval). It was estimated to have been used during the early and middle period of the Joseon dynasty (1391–1776), when the Hoeamsa Temple site was rebuilt. In addition, by staining the fiber of the paper fragment with Graff "C" stain, the paper's raw material was identified as paper mulberry through dislocation, cross-marking, and transparent membrane, which are characteristics of the bast fiber. Efforts were made to identify their material properties and manufacturing techniques of the three types of pigments. Color difference analysis was performed by distributing the pigments in large areas to reveal characteristic differences according to the color difference of the pigment. We found that green-type pigments are malachite and atacamite, red-type pigments are hematite based on the element Fe, and white-type pigments are quartz and muscovite based on the elements Si and Al. In addition, as the size distribution of the three types of pigments is wide and has a multi-peak distribution curve, it was concluded that the pigments were used without purification. [ABSTRACT FROM AUTHOR]

This study applied various scientific analyses to one fragment of paper and three pigments excavated from earthenware found in the Hoeamsa Temple site at Yangju, Korea, which is believed to have been built in the early twelfth century. Radiocarbon dating of the paper fragment suggests a manufacture date between 1460 and 1646 (at a 95% confidence interval). It was estimated to have been used during the early and middle period of the Joseon dynasty (1391–1776), when the Hoeamsa Temple site was rebuilt. In addition, by staining the fiber of the paper fragment with Graff "C" stain, the paper's raw material was identified as paper mulberry through dislocation, cross-marking, and transparent membrane, which are characteristics of the bast fiber. Efforts were made to identify their material properties and manufacturing techniques of the three types of pigments. Color difference analysis was performed by distributing the pigments in large areas to reveal characteristic differences according to the color difference of the pigment. We found that green-type pigments are malachite and atacamite, red-type pigments are hematite based on the element Fe, and white-type pigments are quartz and muscovite based on the elements Si and Al. In addition, as the size distribution of the three types of pigments is wide and has a multi-peak distribution curve, it was concluded that the pigments were used without purification. [ABSTRACT FROM AUTHOR]

This study applied various scientific analyses to one fragment of paper and three pigments excavated from earthenware found in the Hoeamsa Temple site at Yangju, Korea, which is believed to have been built in the early twelfth century. Radiocarbon dating of the paper fragment suggests a manufacture date between 1460 and 1646 (at a 95% confidence interval). It was estimated to have been used during the early and middle period of the Joseon dynasty (1391–1776), when the Hoeamsa Temple site was rebuilt. In addition, by staining the fiber of the paper fragment with Graff "C" stain, the paper's raw material was identified as paper mulberry through dislocation, cross-marking, and transparent membrane, which are characteristics of the bast fiber. Efforts were made to identify their material properties and manufacturing techniques of the three types of pigments. Color difference analysis was performed by distributing the pigments in large areas to reveal characteristic differences according to the color difference of the pigment. We found that green-type pigments are malachite and atacamite, red-type pigments are hematite based on the element Fe, and white-type pigments are quartz and muscovite based on the elements Si and Al. In addition, as the size distribution of the three types of pigments is wide and has a multi-peak distribution curve, it was concluded that the pigments were used without purification. [ABSTRACT FROM AUTHOR]

High per- and polyfluorinated alkyl substance (PFAS) concentrations have been detected in agricultural soils in Southwest Germany. Discharges of PFAS-contaminated paper sludge and compost are suspected to be the cause of the contamination. Perfluorinated carboxylic acids (PFCAs) have been detected also in groundwater, drinking water, and plants in this area. Recently, previously unknown compounds have been identified by high-resolution mass spectrometry (HRMS). Major contaminants were polyfluorinated dialkylated phosphate esters (diPAPs) and N-ethyl perfluorooctane sulfonamide ethanol–based phosphate diester (diSAmPAP). In this study, HRMS screening for PFAS was applied to 14 soil samples from the contaminated area and 14 impregnated paper samples which were from a similar period than the contamination. The paper samples were characterized by diPAPs (from 4:2/6:2 to 12:2/12:2), fluorotelomer mercapto alkyl phosphates (FTMAPs; 6:2/6:2 to 10:2/10:2), and diSAmPAP. In soil samples, diPAPs and their transformation products (TPs) were the major contaminants, but also FTMAPs, diSAmPAP, and their TPs occurred. The distribution patterns of the carbon chain lengths of the precursor PFAS in soil samples were shown to resemble those in paper samples. This supports the hypothesis that paper sludge is a major source of contamination. The presence of major degradation products like PFCAs, FTSAs, or PFOS and their distribution of carbon chain lengths indicate the activity of biotic or abiotic degradation processes and selective leaching processes from the upper soil horizons. [ABSTRACT FROM AUTHOR]

Urinary tract infections (UTIs) make up a significant proportion of the global burden of disease in vulnerable groups and tend to substantially impair the quality of life of those affected, making timely detection of UTIs a priority for public health. However, economic and societal barriers drastically reduce accessibility of traditional lab-based testing methods for critical patient groups in low-resource areas, negatively affecting their overall healthcare outcomes. As a result, cellulose-based materials such as paper and thread have garnered significant interest among researchers as substrates for so-called frugal analytical devices which leverage the material's portability and adaptability for facile and reproducible diagnoses of UTIs. Although the field may be only in its infancy, strategies aimed at commercial penetration can appreciably increase access to more healthcare options for at-risk people. In this review, we catalogue recent advances in devices that use cellulose-based materials as the primary housing or medium for UTI detection and chart out trends in the field. We also explore different modalities employed for detection, with particular emphasis on their ability to be ported onto discreet casings such as sanitary products. [ABSTRACT FROM AUTHOR]

The cleaning of particles from smooth and rough paper surfaces using a high-speed CO2 snow jet was investigated. The measurements included characterization of the jet properties, determination of the cleaning efficiency, and evaluation of any possible adverse effects. The method was compared with nitrogen jet cleaning and dry cleaning by commercial materials. The results showed that the CO2 snow jet is able to effectively remove particles from the paper surface and did not cause any observable degradation. The CO2 snow jet cleaning compared with the mechanical dry cleaning showed similar effectiveness without any adverse effects on the paper surface. It was proved that the CO2 snow technique is a suitable method for cleaning common types of paper materials. [ABSTRACT FROM AUTHOR]

Iron gall Inks corrosion causes paper degradation (browning, embrittlement) and treatments were developed to tackle this issue. They often include resizing with gelatin to reinforce the paper and its cellulosic fibers (of diameter approx. 10 µm). This work aimed at measuring the distribution of ink components at the scale of individual paper fibers so as to give a better understanding of the impact of gelatin (re-)sizing on iron gall ink corrosion. For this purpose, scanning transmission X-ray microscopy (STXM) was used at the Canadian light source synchrotron (CLS, Saskatoon). This technique combines nano-scale mapping (resolution of 30 nm) and near edge X-ray absorption fine structure (NEXAFS) analysis. Fe L-edge measurements enabled to map iron distribution and to locate iron(II) and iron(III) rich areas. N K-edge measurement made it possible to map gelatin distribution. C K-edge measurements allowed mapping and discrimination of cellulose, gallic acid, iron gall ink precipitate and gelatin. Three fibers were studied: an inked fiber with no size, a sized fiber that was afterwards inked and an inked fiber sprayed with gelatin. Analysis of gelatin and ink ingredients distribution indicated a lower amount of iron inside the treated cellulosic fiber, which may explain the beneficial effect of gelatin on iron gall ink corrosion. [ABSTRACT FROM AUTHOR]

A procedure for the rapid simultaneous determination of anthraquinone and bisphenol A in paper and cardboard is proposed based on a combination of extraction with subcritical methanol and subsequent analysis of the extracts by HPLC‒tandem mass spectrometry. The achieved limits of detection are 25 and 250 µg/kg for anthraquinone and bisphenol A, respectively, and fully meet present-day safety requirements for pulp and paper products. The total duration of the analysis, including sample preparation, is not more than 45 min. The sensitivity of anthraquinone determination is 1‒2 orders of magnitude higher than that of the known procedures, including those with the preconcentration of analytes. The results obtained were successfully used to study paper and cardboard samples, in most of which unacceptably high levels of the anthraquinone concentration were found. [ABSTRACT FROM AUTHOR]

Paper-based packaging materials are generally assembled using adhesives formulated with oil-based polymers. These adhesives make the recyclability of the materials more complex and may be the source of material contamination by mineral oil. In view of developing an adhesive-free process, the potential of ultrasonic compression was investigated in this study. 100% lignocellulosic papers were assembled using an ultrasonic welder dedicated to thermoplastic polymers. For papers containing lignin, the measured peeling strengths were equivalent to those achieved by hot-melt gluing, provided that the water content of papers was well adjusted. At the interface between bonded papers, the fiber network was dense and rather continuous. SEM examinations, 3D X-ray microtomography images, and temperature measurements suggested that the development of adhesion originated to a large extent from a thermoplastic welding mechanism: wood fiber polymers passed their glass transition temperatures, creeped and formed a matrix that coated fibers. Thus, ultrasonic welding appears as an efficient adhesive-free technique for assembling papers that are used in a broad range of packaging applications. [ABSTRACT FROM AUTHOR]

The porous, cellulosic fiber networks in commercial paper are generally regarded as continuum materials when the sheet is large compared to the size of fiber agglomerates (flocs). In this manuscript we reveal that even when the average macroscopic tensile response of copy paper specimens is well described by orthotropic anisotropy, the local deformation characteristics inside a specimen and among different specimens are not uniform as predicted by continuum theories. Using a non-contact, high resolution full-field strain measurements, we present specimen orientation specific strain maps and deformation fields. The characteristic length scales of strain hot spots are obtained using thresholding and lineal path correlation and are compared to the characteristic size of flocs. We quantify the spatial distribution and extent of nonaffine (non-continuum) deformations during tensile loading of a commercial paper, and show how they are critical features of deformation and tearing mechanisms in paper. [ABSTRACT FROM AUTHOR]

A quantitative non-destructive express method of determining fillers —kaolin and chalk— in paper was created using attenuated total reflectance Fourier transform infrared (ATR-FT-IR) spectroscopy in the mid-IR and far-IR region (3800–245 cm−1) combined with partial least squares (PLS) data analysis. Altogether, 30 two-component (cellulose pulp + kaolin and cellulose pulp + chalk) reference paper samples with known different filler concentrations and one reference paper sample without any fillers were prepared for calibration and validation. The reference values of filler concentrations in the prepared papers were determined by gravimetric analysis via dry ashing (for establishing accurate concentrations of fillers in paper) and ATR-FT-IR microspectroscopy (for evaluating homogeneity of the papers). Two-component (cellulose pulp + kaolin or cellulose pulp + chalk) PLS models were created with papers of different cellulose types and containing different amounts of fillers. The best model had root mean square errors of prediction (RMSEP) for determining the kaolin or chalk content in the two-component papers of 2.0 and 2.1 g/100 g, respectively. The performance indices were 90.4% and 92.9%, respectively. As a demonstration of practical applicability of the method, different papers from books, journals, etc. were analysed. It was concluded that the developed quantitative method is suitable for non-destructive express analysis of kaolin or chalk in paper. [ABSTRACT FROM AUTHOR]

This paper presents an approach for answering fill-in-the-blank multiple choice questions from the Visual Madlibs dataset. Instead of generic and commonly used representations trained on the ImageNet classification task, our approach employs a combination of networks trained for specialized tasks such as scene recognition, person activity classification, and attribute prediction. We also present a method for localizing phrases from candidate answers in order to provide spatial support for feature extraction. We map each of these features, together with candidate answers, to a joint embedding space through normalized canonical correlation analysis (nCCA). Finally, we solve an optimization problem to learn to combine scores from nCCA models trained on multiple cues to select the best answer. Extensive experimental results show a significant improvement over the previous state of the art and confirm that answering questions from a wide range of types benefits from examining a variety of image cues and carefully choosing the spatial support for feature extraction. [ABSTRACT FROM AUTHOR]

A rapid method for analyzing lignin in paper using IR reflectance spectra from its surface was developed. IR absorption and reflectance spectra of model paper samples prepared from cellulose fibers obtained from deciduous and coniferous woods with various lignin contents were analyzed. The intensity of the lignin absorption band at 1510 cm after Kubelka-Munk transformation of the paper reflectance spectra and chemical data on the fiber lignin content were well correlated. The analytical relationship between the lignin content in the paper fibers and the intensity of the lignin absorption band was used to estimate the lignin concentration in samples of Russian stamping paper from the 19th century using their IR reflectance spectra. The cellulose structure parameter estimated from the paper reflectance spectra showed that sheets containing lignin (5-16%) consisted entirely of wood fibers and were supplemented with kaolin. [ABSTRACT FROM AUTHOR]

We don't know much about the smells of the past. Yet, odours play an important role in our daily lives: they affect us emotionally, psychologically and physically, and influence the way we engage with history. Can this lead us to consider certain smells as cultural heritage? And if so, what would be the processes for the identification, protection and conservation of those heritage smells? In order to answer these questions, the connection between olfaction and heritage was approached in three ways: (1) through theoretical analysis of the concept and role of olfaction in heritage guidelines, leading to identification of places and practices where smell is fundamental to their identity, (2) through exploration of the evidence for use of smells in heritage as a tool to communicate with audiences; and (3) through experimental evaluation of the techniques and methods for analysing and archiving the smells, therefore enabling their documentation and preservation. We present this through the framework of Significance Assessment-Chemical Analysis-Sensory Analysis-Archiving. The smell of historic paper was chosen as the case study, based on its well-recognized cultural significance and available research. Odour characterization was achieved by collecting visitor descriptions of a historic book extract through a survey, and by conducting a sensory evaluation at a historic library. These were combined with the chemical information on the VOCs sampled from both a historic book and a historic library, to create the Historic Book Odour Wheel, a novel documentation tool representing the first step towards documenting and archiving historic smells. [ABSTRACT FROM AUTHOR]

A phenomenological kinetic equation is obtained for the change in color difference and brightness of banknote paper during aging. A solution is obtained for the kinetic equation. The coefficients of the kinetic function are determined from experimental data. Kinetic functions are constructed for three samples of the banknote paper. By analysis of the coefficients of the kinetic function it is possible to compare the paper according to its resistance towards the aging process. [ABSTRACT FROM AUTHOR]

In this study, a cost-effective way to deposit the silver nanoparticles (AgNPs) on paper egg trays was developed, which proved suitable for prolonged storage of table eggs for house-hold use without deterioration of egg quality. Silver nanoparticles were synthesized based on chemical reduction approach and mixed with gelatin-chitosan mixer used as a colloidal stabilizer as well as fixing agent. AgNPs-doped paper egg trays were characterized by TEM, SEM, FTIR, EDX and XRD. AgNPs containing egg trays were tested for its bactericidal effect against commonly found bacteria on egg shells, E. coli, S. aureus, Streptococcus spp and Salmonella spp. Storing of eggs in the AgNPs-deposited paper egg trays improved the shelf-life of the eggs by more than 14 days compared to controls (eggs stored in conventional trays). In conclusion, the developed paper trays possessed strong antimicrobial activity and it could be an effective storage material for eggs. [ABSTRACT FROM AUTHOR]

Background: In this work we explore the chemical effects of particulate matter on paper. We exposed paper made of pure cellulose to the environment in different locations in central London, outdoors (in sheltered conditions) and indoors, for a period of up to 6 months. We monitored particulate matter (PM) deposition by counting the particles deposited every month with a scanning electron microscope. We analysed elemental composition of the deposited particles using inductively coupled plasma mass spectrometry. After accelerated degradation of the exposed samples, we determined the degree of polymerisation using viscometry. Results: We observed higher deposition rates and higher metal concentration outdoors than indoors. Elemental analysis of the deposited particles revealed the presence of some transition metals (Fe, Cu, Cr) that can contribute to the degradation of cellulose fibres through the Fenton reaction. By comparing the degree of polymerisation of protected, unprotected and unexposed samples we could determine the relative contribution of PM deposition on the increase of the degradation rate. We found that the surface concentration of iron correlates with the reduction in the degree of polymerisation of the exposed paper. Conclusions: The results suggest that the presence of Fenton metals in PM has a significant effect on the acceleration of the degradation of cellulose. However, we estimate that this will unlikely occur at the levels of area coverage by PM that are typically avoided in indoor heritage through preventive maintenance and cleaning. [ABSTRACT FROM AUTHOR]

A solid-state powerful supercapacitor (SC) is fabricated with a substrate of Xerox paper. Its current collector based on a foldable electronic circuit is developed by simply pencil drawing. Thin graphite sheets on paper provide effective channels for electron transmission with a low resistance of 95 Ω sq. The conductive organic material of polypyrrole coated on thin graphite sheets acts as the electrode material of the device. The as-fabricated SC exhibits a high specific capacitance of 52.9 F cm at a scan rate of 1 mV s. An energy storage unit fabricated by three full-charged series SCs can drive a commercial light-emitting diode robustly. This work demonstrated a simple, versatile and cost-effective method for paper-based devices. [ABSTRACT FROM AUTHOR]

A rapid and non-destructive method for analyzing the structure of cellulose fibers using IR reflectance spectroscopy from a paper surface was developed and verified for correctness. IR absorption and reflectance spectra of standard paper samples of known composition (sheets made of four fibers of different origin without additives and with additives of kaolin and chalk) were analyzed. Good correlations between these two spectral methods were found for the studied samples. Calibration curves were useful for assessing the structure of cellulose samples from XVIth century historical paper. Data on the degree of cellulose ordering that were obtained from the paper reflectance spectra indicated that the studied sheets consisted mainly of flax fibers with added cotton. This agreed fully with the historical fact that the studied samples were rag papers. [ABSTRACT FROM AUTHOR]

To model advanced 3-D forming strategies for paper materials, the effects of environmental conditions on the mechanical behavior must be quantitatively and qualitatively understood. A tensile test method has been created, verified, and implemented to test paper at various moisture content and temperature levels. Testing results for one type of paper for moisture contents from 6.9 to 13.8 percent and temperatures from 23 to 168 degrees Celsius are presented and discussed. Coupled moisture and temperature effects have been discovered for maximum stress. Uncoupled effects have been discovered for elastic modulus, tangent modulus, hardening modulus, strain at break, tensile energy absorption (TEA), and approximate plastic strain. A hyperbolic tangent function is also utilized which captures the entire one-dimensional stress-strain response of paper. The effects of moisture and temperature on the three coefficients in the hyperbolic tangent function may be assumed to be uncoupled, which may simplify the development of moisture- and temperature-dependent constitutive models. All parameters were affected by both moisture and temperature with the exception of TEA, which was found to only be significantly dependent on temperature. [ABSTRACT FROM AUTHOR]

As an analytical support, paper, being low cost, highly abundant, of high porosity, disposable or biodegradable, and easy to use, store, transport, and print, has excellent chemical compatibility with many applications. Since the first microfluidic paper-based analytical device (μ-PAD or lab-on-paper) was proposed, the paper-based assay has never attracted as much attention as it does now. There has recently been rapidly increasing interest in using sensitive luminescence methods, for example chemiluminescence (CL) and electrogenerated chemiluminescence (ECL), as the detection strategy for lab-on-paper devices. Because of their intrinsic characteristics, CL and ECL provide outstanding performance while retaining the simplicity, low cost, multifunctionality, versatility, flexibility, and disposability of μ-PADs. The objective of this review is to cover the development of lab-on-paper-based devices using CL and ECL detection, including fabrication of paper devices, construction of sensing interfaces, signal amplification strategies, external instruments used, and applications. We believe that lab-on-paper devices with CL and ECL detection methods will meet the diverse requirements of point-of-care diagnosis. [ABSTRACT FROM AUTHOR]

A newly modified paper-based enzyme-linked immunosorbent assay (P-ELISA) was established by immobilizing more proteins on the paper surface through an atom transfer radical polymerization (ATRP) reaction. In addition, introducing graphene oxide (GO) sheets, Au nanoparticles (AuNps) and two primary antibodies (Ab1s) led to signal amplification and cost reduction. [ABSTRACT FROM AUTHOR]

Deacidification is an established conservation treatment for the prolongation of the acidic paper stability. Several different deacidification systems are in use today, such as the dispersions of alkaline nanoparticles in organic solvents. The aim of the study was to compare the effects of different calcium nanoparticle dispersions in alcohols on lignocellulosic paper. Commercially available nano calcium hydroxide dispersions for paper deacidification, and laboratory prepared nano calcium carbonate dispersions in ethanol and 2-propanol were investigated and compared as to their effectiveness in increasing the stability of paper. The FE-SEM analyses were used to determine the size of Ca(OH)2 and CaCO3 particles in the dispersions. The SEM–EDS analyses were performed both on the paper surface and its cross-section in order to ascertain the distribution of calcium ions following the deacidification treatment. An evaluation of the changes of color, molecular weight, pH and alkaline reserve on different lignocellulosic papers was performed. In comparison to untreated samples, our results indicate all the investigated deacidification treatments decrease the degradation rate constant of cellulose, as determined by accelerated degradation. However, the treatments involving nano calcium hydroxides in both alcohols noticeably affect the color of the treated lignocellulosic papers. According to the obtained results, nano calcium carbonate is therefore the more suitable deacidification agent for the lignin containing papers. [ABSTRACT FROM AUTHOR]

The study of micro-objects, both inorganic and organic, which can be found associated to parchment or cellulose fibres of books and documents, or in the inks and the dirt, accumulated over the centuries between the pages, can unravel important information on the manufacture of the ancient documents, on their past vicissitudes or on the causes of aging and deterioration of the materials they contain. The results of a critical observation of micrometric objects and structures with a diagnostic or archaeological significance have in some cases been surprising. Apart from the curiosity that certain findings may or may not raise, what needs to be discussed is the fact that some chemical components, usually attributed to the manufacture of materials or the inks may instead have a particular origin and nature, and therefore lead, if not properly highlighted, to some erroneous diagnostics. Examples are given where the information obtained by means of scanning electron microscope imaging and Raman microscopy were coupled with dispersive X-ray microanalysis and Fourier Transform Infrared Spectroscopy. [ABSTRACT FROM AUTHOR]

Background: There has been growing interest in the development of waste-specific decay factors for estimation of greenhouse gas emissions from landfills in national greenhouse gas inventories. Although engineered wood products (EWPs) and paper represent a substantial component of the solid waste stream, there is limited information available on their carbon dynamics in landfills. The objective of this study was to determine the extent of carbon loss for EWPs and paper products commonly used in Australia. Experiments were conducted under laboratory conditions designed to simulate optimal anaerobic biodegradation in a landfill.Results: Methane generation rates over incubations of 307-677 days ranged from zero for medium-density fibreboard (MDF) to 326 mL CH4 g−1 for copy paper. Carbon losses for particleboard and MDF ranged from 0.7 to 1.6%, consistent with previous estimates. Carbon loss for the exterior wall panel product (2.8%) was consistent with the expected value for blackbutt, the main wood type used in its manufacture. Carbon loss for bamboo (11.4%) was significantly higher than for EWPs. Carbon losses for the three types of copy paper tested ranged from 72.4 to 82.5%, and were significantly higher than for cardboard (27.3-43.8%). Cardboard that had been buried in landfill for 20 years had a carbon loss of 27.3%—indicating that environmental conditions in the landfill did not support complete decomposition of the available carbon. Thus carbon losses for paper products as measured in bioreactors clearly overestimate those in actual landfills. Carbon losses, as estimated by gas generation, were on average lower than those derived by mass balance. The low carbon loss for particleboard and MDF is consistent with carbon loss for Australian wood types described in previous studies. A factor for carbon loss for combined EWPs and wood in landfills in Australia of 1.3% and for paper of 48% is proposed.Conclusions: The new suggested combined decay factor for wood and EWPs represents a significant reduction from the current factor used in the Australian greenhouse gas inventory; whereas the suggested decay factor for paper is similar to the current decay factor. Our results improve current understanding of the carbon dynamics of harvested wood products, and allow more refined estimates of methane emissions from landfills. [ABSTRACT FROM AUTHOR]

The article summarizes research published in a 2015 issue of "Advanced Materials" concerning the development of a flexible lithium-air battery using paper and lithium foil with a carbon-based ink which was capable of holding a charge even after being bent 1,000 times.