Search

This study conducted a nationwide specific assessment of soil chromium (Cr) contamination status in 506 of China's industrial regions. The overall soil Cr concentrations were 0.74–37,967.33 mg/kg, and the soil Cr content in 4.15% of the regions exceeded the reference screening value (2500 mg/kg). Geochemical accumulation index (Igeo) and monomial potential ecological risk index (E) revealed Cr salt production and tanning were the primary control industries. The non-carcinogenic risks posed by Cr salt production and tanning industries were higher than the national average values, and children were the most vulnerable groups. The heavily polluted regions were mainly located at the Yangtze River Delta, the Bohai Rim, the Pearl River Delta, the Yangtze River Basin, and the Yellow River Basin. The Yangtze River Delta was further identified as the high priority control area based on the class distribution of Igeo and E. Regression analysis showed the soil Cr concentrations in industrial regions increased during 2002–2009 and then turned into a declining trend in 2009–2021. This paper gives detailed insights into soil Cr pollution status in industrial regions across China and the results may serve as references for formulating tailored control measures for different industries and areas. [ABSTRACT FROM AUTHOR]

Hexavalent chromium (Cr(VI)) waste produced by chrome plating activities pollutes the surrounding environment and harms human health. However, information about the chromium (Cr) pollution characteristics of actual electroplating sites is still lacking. In this study, the concentration, leachability and speciation of Cr in soils from a typical chrome plating site were analyzed. Our results showed that this site was severely contaminated by Cr (7.2 to 7735.2 mg/kg) and Cr(VI) reached the mean concentration of 138.7 mg/kg. The spatial distribution of Cr(VI) was related to the plating processes. Chrome plating and sewage treatment areas could be considered as the hot spots of contaminated sites. The vertical distribution of Cr(VI) was mainly affected by soil properties, where the loam layer retained and reduced a large amount of Cr(VI) due to its high content of iron minerals and finer particle fractions. Additionally, the chemical extraction results showed that Cr was mainly in non-residual fractions and the existence of Cr(VI) led to a high leaching toxicity based on the toxicity characteristic leaching procedure (TCLP) results. Moreover, X-ray photoelectron spectroscopy (XPS) results revealed the speciation of Cr in the long-term contaminated soils. A large amount of Cr(VI) was reduced into Cr(III) and mainly existed as Cr(OH)3 and Cr2O3. Furthermore, Cr(VI) tended to precipitate as CaCrO4 and persisted in soils. Therefore, it is necessary to find appropriate strategies to remediate these contaminated soils. Overall, these findings strengthen our understanding of Cr(VI) behaviors and lay a foundation for the future pollution investigation, ecological remediation and risk assessment of sites contaminated by electroplating. [ABSTRACT FROM AUTHOR]

The aggregation of nanoscale zero-valent iron (nZVI) particles and their limited transport ability in environmental media hinder their application in environmental remediation. In this study, the Cr(VI) removal efficiency, transport performance, and toxicity of nZVI and bentonite-modified nZVI (B-nZVI) were investigated. Compared with nZVI, B-nZVI improved the removal efficiency of Cr(VI) by 10%, and also significantly increased the transport in quartz sand and soil. Increasing the flow rate can enhance the transport of nZVI and B-nZVI in the quartz sand columns. The transport of the two materials in different soils was negatively correlated with the clay composition. Besides, modification of nZVI by bentonite could reduce toxicity to luminous bacteria (Photobacterium phosphereum T3) and ryegrass (Lolium perenne L.). Compared with Fe-EDTA, the transfer factors of nZVI and B-nZVI were 65.0% and 66.4% lower, respectively. This indicated that although iron nanoparticles accumulated in the roots of ryegrass, they were difficult to be transported to the shoots. The results of this study indicate that B-nZVI has a strong application potential in in situ environmental remediation. [ABSTRACT FROM AUTHOR]

Copper oxide nanoparticles (CuO NPs) are widely used as a fungicide in agriculture. The application of CuO NPs in agriculture affects the growth of rice and metal accumulation in rice. However, the mechanism of CuO NPs on arsenic (As) accumulation in rice remains unclear. In this study, a hydroponic culture was produced to investigate the mechanism of the effect of 50 and 100 mg L−1 CuO NPs on As accumulation in rice. Our results showed that CuO NPs decreased As(III/V) accumulation in the roots and shoots by adsorbing As(III/V), oxidizing of As(III) on the surface, and thickening the root cell wall. The addition of CuO NPs regulated the expression of the OsNIP1;1, OsHAC1;1, and OsHAC4 genes, which decreased As(III) transport and promoted As(V) reduction in the roots. Moreover, when CuO NPs were co-exposed to As, a negative correlation between the concentration of Cu and As in rice was also found in our study. However, CuO NPs significantly increased Cu accumulation in rice and constrained the rice growth. In conclusion, CuO NPs might be a promising way to decrease As accumulation in rice, but the negative effects such as growth inhibition should be further considered. Therefore, the application of CuO NPs in rice plants should take a more restrained approach. [ABSTRACT FROM AUTHOR]

The rhizosphere is an essential pathway for the uptake of metal-based nanoparticles (MNPs) by plant roots. However, the interaction between root exudates and MNPs is still unclear. In this study, we initially identified the major low-molecular-weight organic acids (LMWOAs) in the rice root exudates using hydroponics. Then, the individual LMWOAs were added to CuO nanoparticle suspensions to investigate their effects on the environmental behavior of the MNPs. The results showed that both the variety and the concentration of LMWOAs impacted the aggregation, sedimentation, and dissolution of CuO nanoparticles (NPs). Almost all LMWOAs except succinic acid inhibited the aggregation of CuO NPs by enhancing the electrostatic repulsive force between NPs. The presence of citric and oxalic acids rather than lactic acid greatly improved the stability of CuO NP suspensions, but other acids showed a low promoting and high inhibiting effect on NP sedimentation. Moreover, all the LMWOAs from root exudates facilitated the dissolution of CuO NPs with a positive dose-dependent correlation, especially formic acid. Notably, citric acid, as the most abundant LMWOAs in rice root exudates, largely determined the aggregation, sedimentation, and dissolution of CuO NPs. This study provides a better understanding on NP–plant interactions in the rhizosphere. [ABSTRACT FROM AUTHOR]

The wide use of metal-based nanoparticles (MNPs) will inevitably lead to their release into soil, and consequently affect the quality and ecological functions of soil environments. In this study, two paddy soils with different properties were exposed to CuO NPs to evaluate the transformation of CuO NPs and their effects on soil properties and components. The results of single chemical extraction and X-ray absorption fine structure analysis showed that CuO NPs could release Cu ions once being applied into the flooding paddy soil and then progress toward the more stable forms (Cu2S and Cu(OH)2). CuO NPs could change the soil properties by increasing the pH and Eh of the lower organic matter-soil rather than those of the higher organic matter-soil. Furthermore, we found that the 1000 mg/kg CuO NPs could accelerate the degradation or mineralization of the organic matter, as well as the Fe reduction process, by increasing the Fe(II) content by 293% after flooding for 60 days in the lower organic matter soil. The microbial biomass in both soils was severely inhibited by CuO NPs and the organic matter could partly mitigate the negative effects of CuO NPs. [ABSTRACT FROM AUTHOR]

Flavonoids are natural polyphenolic compounds produced by many aquatic plants and released in their environments. In this study, the effects of several aquatic flavonoids on cyanobacterial Microcystis aeruginosa, especially in relation to the cell growth, photosynthetic activity, cell morphology, and cell membrane integrity, were investigated. Significant growth inhibition was observed when the cyanobacteria were exposed to three flavonoids, namely, 5,4'-dihydroxyflavone (DHF), apigenin, and luteolin. Luteolin reduced the effective quantum yield, photosynthetic efficiency, and maximal electron transport rate by 70%, 59% and 44%, respectively, whereas 5,4'-DHF and apigenin slightly affected these parameters, which implies that luteolin disrupts the photosynthetic system. Moreover, 5,4'-DHF and apigenin compromised the membrane integrity, and induced membrane depolarization in 52% and 38%, and permeabilization in 30% and 44% of the cells, respectively. The 5,4'-DHF and apigenin showed more pronounced effects on M. aeruginosa morphology and membrane integrity, compared to the luteolin. These results suggest that flavonoids could have significant effects on growth and physiological functions in cyanobacterial species.