Search

The future of the grid includes distributed generation and smart grid technologies. Demand Side Management (DSM) systems will also be essential to achieve a high level of reliability and robustness in power systems. To do that, expanding the Advanced Metering Infrastructure (AMI) and Energy Management Systems (EMS) are necessary. The trend direction is towards the creation of energy resource hubs, such as the smart community concept. This paper presents a smart multiconverter system for residential/housing sector with a Hybrid Energy Storage System (HESS) consisting of supercapacitor and battery, and with local photovoltaic (PV) energy source integration. The device works as a distributed energy unit located in each house of the community, receiving active power set-points provided by a smart community EMS. This central EMS is responsible for managing the active energy flows between the electricity grid, renewable energy sources, storage equipment and loads existing in the community. The proposed multiconverter is responsible for complying with the reference active power set-points with proper power quality; guaranteeing that the local PV modules operate with a Maximum Power Point Tracking (MPPT) algorithm; and extending the lifetime of the battery thanks to a cooperative operation of the HESS. A simulation model has been developed in order to show the detailed operation of the system. Finally, a prototype of the multiconverter platform has been implemented and some experimental tests have been carried out to validate it. [ABSTRACT FROM AUTHOR]

This paper aims to provide control strategies for distributed micro-storage energy systems at the residential level to contribute to smart grid goals. A simulation model of an energy storage system (ESS) charger has been implemented to test these proposed control strategies. The smart community energy management system (SCEMS), acting as an aggregator of resources in the community according to the expected demand and production, sends to each individual home the active and reactive power set-points. Besides, in case the ESS has available capacity, once the SCEMS requirements are satisfied, it is used to absorb the harmonic current components demanded by the household circuitry. It allows a local improvement in the power quality of the demanded current, and thus contributes to the global power quality consumption of the community. Simulation results showing the operation of a local ESS at a home in a Smart Community are presented to validate the proposed control strategies. [ABSTRACT FROM AUTHOR]

Sensorless control of electrical drives is still a difficult task, especially in the lower speed region. Moreover, when the machine has a low saliency such as in the case of Surface Mounted Permanent Magnet Synchronous Motor (SMPMSM), high frequency injection techniques are even more challenging. In this paper, an enhanced demodulation algorithm for the sensorless control of a SMPMSM is proposed. The new scheme uses the high frequency injection in the Synchronous Reference Frame (SRF) and employs also the negative sequence content of the measured current for improved accuracy. This allows an improved performance with a lower amplitude of the injected signal, thus reducing the noise and additional losses in the motor. It is found that, by using both components with the algorithm developed the estimation ripple can be greatly reduced and the system can operate properly with a voltage injection of only 2.17% of the rated motor voltage, which is lower than most found in the literature, specially for low saliency machines. Simulations tests are carried out for the validation of the proposed method and experimental results in a 6.7 kW SMPMSM confirm its usefulness and correct operation with a reduced voltage injection, both in no-load and load conditions, for different low speeds, including start-up. [ABSTRACT FROM AUTHOR]