Search

Timely monitoring and precise estimation of the leaf chlorophyll contents of maize are crucial for agricultural practices. The scale effects are very important as the calculated vegetation index (VI) were crucial for the quantitative remote sensing. In this study, the scale effects were investigated by analyzing the linear relationships between VI calculated from red-green-blue (RGB) images from unmanned aerial vehicles (UAV) and ground leaf chlorophyll contents of maize measured using SPAD-502. The scale impacts were assessed by applying different flight altitudes and the highest coefficient of determination (R 2 ) can reach 0.85. We found that the VI from images acquired from flight altitude of 50 m was better to estimate the leaf chlorophyll contents using the DJI UAV platform with this specific camera (5472 × 3648 pixels). Moreover, three machine-learning (ML) methods including backpropagation neural network (BP), support vector machine (SVM), and random forest (RF) were applied for the grid-based chlorophyll content estimation based on the common VI. The average values of the root mean square error (RMSE) of chlorophyll content estimations using ML methods were 3.85, 3.11, and 2.90 for BP, SVM, and RF, respectively. Similarly, the mean absolute error (MAE) were 2.947, 2.460, and 2.389, for BP, SVM, and RF, respectively. Thus, the ML methods had relative high precision in chlorophyll content estimations using VI; in particular, the RF performed better than BP and SVM. Our findings suggest that the integrated ML methods with RGB images of this camera acquired at a flight altitude of 50 m (spatial resolution 0.018 m) can be perfectly applied for estimations of leaf chlorophyll content in agriculture.

The accurate estimation of leaf chlorophyll content (LCC) is a significant foundation in assessing litchi photosynthetic activity and possible nutrient status. Hyperspectral remote sensing data have been widely used in agricultural quantitative monitoring research for the non-destructive assessment of LCC. Variable selection approaches are crucial for analyzing high-dimensional datasets due to the high danger of overfitting, time-intensiveness, or substantial computational requirements. In this study, the performance of five machine learning regression algorithms (MLRAs) was investigated based on the hyperspectral fractional order derivative (FOD) reflection of 298 leaves together with the variable combination population analysis (VCPA)-genetic algorithm (GA) hybrid strategy in estimating the LCC of Litchi. The results showed that the correlation coefficient (r) between the 0.8-order derivative spectrum and LCC had the highest correlation coefficients (r = 0.9179, p < 0.01). The VCPA-GA hybrid strategy fully utilizes VCPA and GA while compensating for their limitations based on a large number of variables. Moreover, the model was developed using the selected 14 sensitive bands from 0.8-order hyperspectral reflectance data with the lowest root mean square error in prediction (RMSEP = 5.04 μ g · cm − 2 ). Compared with the five MLRAs, validation results confirmed that the ridge regression (RR) algorithm derived from the 0.2 order was the most effective for estimating the LCC with the coefficient of determination (R2 = 0.88), mean absolute error (MAE = 3.40   μ g · cm − 2 ), root mean square error (RMSE = 4.23   μ g · cm − 2 ), and ratio of performance to inter-quartile distance (RPIQ = 3.59). This study indicates that a hybrid variable selection strategy (VCPA-GA) and MLRAs are very effective in retrieving the LCC through hyperspectral reflectance at the leaf scale. The proposed methods could further provide some scientific basis for the hyperspectral remote sensing band setting of different platforms, such as an unmanned aerial vehicle (UAV) and satellite. [ABSTRACT FROM AUTHOR]

Controlling and managing surface source pollution depends on the rapid monitoring of total nitrogen in water. However, the complex factors affecting water quality (plant shading and suspended matter in water) make direct estimation extremely challenging. Considering the spectral response mechanisms of emergent plants, we coupled discrete wavelet transform (DWT) and fractional order discretization (FOD) techniques with three machine learning models (random forest (RF), bagging algorithm (bagging), and eXtreme Gradient Boosting (XGBoost)) to mine this potential spectral information. A total of 567 models were developed, and airborne hyperspectral data processed with various DWT scales and FOD techniques were compared. The effective information in the hyperspectral reflectance data were better emphasized after DWT processing. After DWT processing the original spectrum (OR), its sensitivity to TN in water was maximally improved by 0.22, and the correlation between FOD and TN in water was optimally increased by 0.57. The transformed spectral information enhanced the TN model accuracy, especially for FOD after DWT. For RF, 82% of the model R2 values improved by 0.02~0.72 compared to the model using FOD spectra; 78.8% of the bagging values improved by 0.01~0.53 and 65.0% of the XGBoost values improved by 0.01~0.64. The XGBoost model with DWT coupled with grey relation analysis (GRA) yielded the best estimation accuracy, with the highest precision of R2 = 0.91 for L6. In conclusion, appropriately scaled DWT analysis can substantially improve the accuracy of extracting TN from UAV hyperspectral images. These outcomes may facilitate the further development of accurate water quality monitoring in sophisticated global waters from drone or satellite hyperspectral data. [ABSTRACT FROM AUTHOR]

The vegetation index (VI) has been successfully used to monitor the growth and to predict the yield of agricultural crops. In this paper, a long-term observation was conducted for the yield prediction of maize using an unmanned aerial vehicle (UAV) and estimations of chlorophyll contents using SPAD-502. A new vegetation index termed as modified red blue VI (MRBVI) was developed to monitor the growth and to predict the yields of maize by establishing relationships between MRBVI- and SPAD-502-based chlorophyll contents. The coefficients of determination (R2s) were 0.462 and 0.570 in chlorophyll contents' estimations and yield predictions using MRBVI, and the results were relatively better than the results from the seven other commonly used VI approaches. All VIs during the different growth stages of maize were calculated and compared with the measured values of chlorophyll contents directly, and the relative error (RE) of MRBVI is the lowest at 0.355. Further, machine learning (ML) methods such as the backpropagation neural network model (BP), support vector machine (SVM), random forest (RF), and extreme learning machine (ELM) were adopted for predicting the yields of maize. All VIs calculated for each image captured during important phenological stages of maize were set as independent variables and the corresponding yields of each plot were defined as dependent variables. The ML models used the leave one out method (LOO), where the root mean square errors (RMSEs) were 2.157, 1.099, 1.146, and 1.698 (g/hundred grain weight) for BP, SVM, RF, and ELM. The mean absolute errors (MAEs) were 1.739, 0.886, 0.925, and 1.356 (g/hundred grain weight) for BP, SVM, RF, and ELM, respectively. Thus, the SVM method performed better in predicting the yields of maize than the other ML methods. Therefore, it is strongly suggested that the MRBVI calculated from images acquired at different growth stages integrated with advanced ML methods should be used for agricultural- and ecological-related chlorophyll estimation and yield predictions. [ABSTRACT FROM AUTHOR]