Search

Chloride ions play an important role in the corrosion of bronze through their active reactivity to copper alloys. The corrosion behavior of bronze alloys in NaCl solution was investigated by using X-ray diffraction (XRD), a scanning electron microscope (SEM), and electrochemical tests, with a special emphasis on the corrosion resistance of the α and δ phases in Cu-20 wt%Sn bronze alloys. The experimental results show that the corrosion current density of Cu-20 wt%Sn bronze alloys increases from 1.1 × 10−7 A/cm2 to 2.7 × 10−6 A/cm2 with the increase in the chloride ion concentration from 10−3 mol/L to 1 mol/L. After a soaking duration of 30 days, the matrix corrosion depth reaches 50 μm. The α phase of the alloys is easily corroded in NaCl solution, while the δ phase with high Sn content has strong corrosion resistance. This study provides relevant data for the analysis and protection of ancient bronze alloys. [ABSTRACT FROM AUTHOR]

This study is a detailed failure analysis of galvanized high carbon steel wires, which developed coating cracks during the torsion test performed as a quality control at the end of the manufacturing process. Careful visual inspections showed that the cracks are already present in the coating before the torsion test. In order to explain the origin of these cracks, systematic metallographic investigations were performed by means of optical and scanning electron microscope on both the wires and the rods that have been cold drawn to produce the wire. The chemical composition of the galvanized coatings was evaluated by means of energy dispersive spectroscopy. Micro bidimensional X-ray diffraction experiments were also performed to measure the residual stresses in the galvanized coating. The results showed that the failure is related to two main factors: the relatively high content of silicon in the steel and the unsuitable cooling rate of the rods at the exit from the galvanizing bath. The mechanism proposed to explain the origin of the defects was supported by Finite Elements Methods simulations and verified with in-plant tests. The proper countermeasures were then applied and the problem successfully solved. [ABSTRACT FROM AUTHOR]

Silty soil has the characteristics of low natural moisture content and poor viscosity, and the strength and deformation required for foundation engineering can be satisfied by reinforcing and improving the silt. In order to study the reinforcement and improvement effects of polypropylene (PP) fiber and fly ash (FA) on cement–silty soil, an unconfined compressive strength (UCS) test, scanning electron microscope (SEM) test, and X-ray diffraction (XRD) analysis test were carried out. Cement (mixed amounts are 4%, 8%, 12%, and 16% of dry soil mass) was used as the basic modifier, and PP fiber (mixed amounts are 0%, 0.15%, 0.3%, and 0.45% of dry soil mass) compounded with FA (adding amounts of 0%, 5%, 10%, and 15% of dry soil mass) were used as an external admixture of cement–silty soil to study the mechanical properties, curing mechanism, and microstructure of the modified soil in different ages of 7 d, 14 d, 28 d, and 60 d. The test results show that with the increase in cement and curing age, the UCS of the modified soil increases, and with the increase in the PP fiber and FA, the UCS of the modified soil first increases and then decreases; there is an optimal content of FA and PP fiber, which are 10 and 0.15%, respectively. A large amount of C-S-H and AFt substances are produced inside the modified soil to cover the surface of soil particles or fill in the pores between soil particles, forming a tight spatial network structure and improving the mechanical properties of the cement–soil. The intensity of the diffraction peaks of the mineral components within the modified soils is more influenced by the cement and age, and the effect of FA is weaker. The stress–strain curve of the modified soil is divided into elastic stage, plastic deformation stage, and strain-softening stage, and the specimens in each stage have corresponding deformation characteristics. By analyzing the behavioral characteristics and curing improvement mechanism of modified soil from the duo perspective of macro-mechanical properties and microstructural composition, it can provide some basis for the engineering application of silty soil. [ABSTRACT FROM AUTHOR]