Search

Lily (Lilium spp.) is a popular ornamental plant. Traditional genetic transformation methods have low efficiency in lily, thus development of a high-efficiency genetic transformation system is important. In this study, a novel transient transformation method involving pollen magnetofection was established and optimized pollen viability, and exogenous gene expression in magnetofected pollen and that of different germplasm were assessed. The highest germination percentage of Lilium regale pollen was 85.73% in medium containing 100 g/L sucrose, 61.5 mg/L H3BO3, and 91.5 mg/L CaCl2. A 1:4 ratio of nanomagnetic beads to DNA plasmid and transformation time of 0.5 h realized the highest transformation efficiency (88.32%). The GFP activity in transformed pollen averaged 69.66%, while that of the control pollen was 0.00%. In contrast to the control, transgenic seedlings obtained by pollination with magnetofected pollen showed strong positive GUS activity with 56.34% transformation efficiency. Among the lily germplasm tested, 'Sweet Surrender' and L. leucanthum had the highest transformation efficiency (85.80% and 54.47%), whereas L. davidii var. willmottiae was not successfully transformed. Transformation efficiency was positively correlated with pollen equatorial diameter and negatively correlated with polar axis/equatorial diameter ratio. The results suggest that pollen magnetofection-mediated transformation can be applied in Lilium but might have species or cultivar specificity. [ABSTRACT FROM AUTHOR]

Ogura cytoplasmic male sterility (CMS) is one of the important methods for hybrid seed production in cruciferous crops. The lack of a restorer of fertility gene (Rfo) in Brassica rapa L. restricts the development and utilization of its germplasm resources. In this research, Brassica napus with the Rfo gene was used to restore the fertility of Ogura CMS B. rapa with the golden heart trait. Through the distant cross of two B. rapa and four B. napus, six interspecific hybrid combinations received F1 seeds. The six combinations were different in seed receiving. By morphological observation and molecular marker-assisted selection (MAS), in F1, individuals containing the Rfo gene all appeared fertile, while those without it remained male-sterile. The pollen viability of the fertile individuals was measured, and the fertile lines of the six interspecific hybrid combinations were different (40.68–80.49%). Three individuals (containing both Rfo and GOLDEN genes) with the highest pollen vitality (≥60%) were backcrossed with fertile cytoplasmic B. rapa, resulting in a total of 800 plants. Based on the MAS, a total of 144 plants with GOLDEN but no Rfo were screened (18%). Moreover, through morphological investigation, one individual with normal cytoplasm, stable fertility but without the restoring gene Rfo, the GOLDEN gene, and morphological characteristics similar to those of B. rapa was obtained. These results increased the diversity of B. rapa germplasm and provided a new method for the utilization of CMS germplasm in Brassica crops. [ABSTRACT FROM AUTHOR]

Paeonia ostii is an important woody oil crop mainly cross-pollinated. However, the low yield has become an important factor restricting the industrial development of P. ostii. Cross-pollination has become one of the important measures to increase the seed yield. Therefore, conservation of pollen with high vitality is crucial to ensure successful pollination of P. ostii. In this study, we found an effective methodological system to assess the viability, ability to germinate, and optimal storage conditions of P. ostii pollen grains. The optimal medium in vitro was 50 g/L sucrose, 100 mg/L boric acid, 50 g/L PEG6000, 100 mg/L potassium nitrate, 300 mg/L calcium nitrate, and 200 mg/L magnesium sulfate at pH 5.4. Optimal germination condition in vitro was achieved at 25 °C for 120 min, allowing easy observation of the germination percentage and length of the pollen tubes. In addition, the viability of pollen grains was assessed by comparing nine staining methods. Among them, MTT, TTC, benzidine-H2O2, and FDA were effective to distinguish between viable and non-viable pollen, and the results of the FDA staining method were similar to the pollen germination percentage in vitro. After evaluation of pollen storage, thawing and rehydration experiments showed that thawing at 4 °C for 30 min and rehydration at 25 °C for 30 min increased the germination percentage of pollen grains stored at low temperatures. The low-temperature storage experiments showed that 4 °C was suitable for short-term storage of P. ostii pollen grains, while −80 °C was suitable for long-term storage. This is the first report on the in vitro germination, viability tests, and storage of P. ostii pollen grains, which will provide useful information for P. ostii germplasm conservation and artificial pollination. [ABSTRACT FROM AUTHOR]

Gleditsia sinensis Lam. (Fabaceae) is an endemic species in China, which has a wide range of ecological functions and high economic value. G. sinensis belongs to androdioecy, and the stamens of perfect flowers are aborted, meaning that a perfect flower is a functional female flower. Understanding the dynamic process of flowering and the characteristics of pollen morphology effectively determine the viability of pollen vitality, and the suitable conditions for short-term storage of pollen can provide theoretical basis and technical reference for hybrid breeding and germplasm conservation of G. sinensis. In this study, the male plants of G. sinensis in Guiyang area were used as research materials. The flowering dynamic process of male flowers was recorded through field observation. The morphology of pollen was observed and analyzed with a scanning electron microscope (SEM). The germination characteristics of pollen were studied with an in vitro germination method, and the pollen vitality was also determined using four staining methods. The effects of different storage temperatures and water contents on pollen germination rate were discussed. The results showed that the male flowers of G. sinensis had a short, single flowering period, lasting 2–3 days from the opening to the shedding. The dynamic opening process of a single flower was artificially divided into five stages. Pollen grains of G. sinensis are oblate spheroidal, tricolporate with equatorial elongated endoapertures and the sporoderm surface is reticulate. The MTT (Thiazolyl Blue Tetrazolium Bromide) staining method could accurately and quickly determine the pollen vitality of G. sinensis. The highest pollen germination rate was 65.89% ± 3.41%, and the length of the pollen tube was 3.96 mm after cultured in 15% sucrose + 100 mg/L boric acid + 20 mg/L calcium chloride for 24 h. It was necessary to collect the pollen at the big bud stage, which was conducive to improving the efficiency of pollen collection because the pollen had been mature with high pollen vitality at this stage. When it came to pollen preservation, the pollen germination rate was significantly affected by storage time, storage temperature and pollen water content. The pollen still had high vitality after being stored at −80 °C for 30 days when the moisture content of the pollen decreased to 9%, and the pollen germination rate only decreased by 28.84% compared with that before storage. In conclusion, this study has comprehensively and systematically studied the morphology, vitality determination and preservation methods of the pollen of G. sinensis, providing a theoretical basis for the cross regional breeding and the conservation and utilization of germplasm resources. [ABSTRACT FROM AUTHOR]

In Brassica, interspecific hybridisation plays an important role in the formation of allopolyploid cultivars. In this study, the ploidy of F1 and F2 generations resulting from interspecific hybridisation between B. oleracea inbred lines of head cabbage (B. oleracea L. var. capitata) (2n = 18) and kale (B. oleracea L. var. acephala) (2n = 18) with inbred lines of rapeseed (B. napus L.) (2n = 38) was examined by flow cytometry analysis and chromosome observation. Furthermore, the effect of meiotic polyploidisation on selected phenotypic and anatomical traits was assessed. The F1 hybrids of head cabbage × rapeseed (S3) and kale × rapeseed crosses (S20) were allotriploids with 2n = 28 chromosomes, and nuclear DNA amounts of 1.97 (S3) and 1.99 pg (S20). These values were intermediate between B. oleracea and B. napus. In interspecific hybrids of the F2 generation, which were derived after self-pollination of F1 hybrids (FS3, FS20) or by open crosses between F1 generation hybrids (FC320, FC230), the chromosome numbers were similar 2n = 56 or 2n = 55, whereas the genome sizes varied between 3.81 (FS20) and 3.95 pg 2C (FC230). Allohexaploid F2 hybrids had many superior agronomic traits compared to parental B. napus and B. oleracea lines and triploid F1 hybrids. In the generative stage, they were characterised by larger flowers and flower elements, such as anthers and lateral nectaries. F2 hybrids were male and female fertile. The pollen viability of F2 hybrids was comparable to parental genotypes and varied from 75.38% (FS3) to 88.24% (FC320), whereas in triploids of F1 hybrids only 6.76% (S3) and 13.46% (S20) of pollen grains were fertile. Interspecific hybrids of the F2 generation derived by open crosses between plants of the F1 generation (FC320, FC230) had a better ability to set seed than F2 hybrids generated from the self-pollination of F1 hybrids. In the vegetative stage, F2 plants had bigger and thicker leaves, larger stomata, and significantly thicker layers of palisade and spongy mesophyll than triploids of the F1 generation and parental lines of B. oleracea and B. napus. The allohexaploid F2 hybrids analysed in this study can be used as innovative germplasm resources for further breeding new vegetable Brassica crops at the hexaploid level. [ABSTRACT FROM AUTHOR]

Olea europaea L. is a crop typical of the Mediterranean area that has an important role in economy, society, and culture of this region. Climate change is expected to have significant impact on this crop, which is typically adapted to certain pedo-climatic characteristics of restricted geographic areas. In this scenario, the aim of this study was to evaluate the time-course response of pollen viability to different combinations of temperature and humidity. The study was performed comparing flowering time and pollen functionality of O. europaea from twelve cultivars growing at the same site belonging to the Campania olive collection in Italy. Pollen was incubated at 12 °C, 22 °C, and 36 °C in combination with 50% RH or 100% RH treatments for 5 days. The results highlighted that a drastic loss of pollen viability occurs when pollen is subjected to a combination of high humidity and high temperature, whereas 50% RH had less impact on pollen thermotolerance, because most cultivars preserved a high pollen viability over time. In the ongoing climate change scenario, it is critical to assess the effect of increasing temperatures on sensitive reproductive traits such as pollen viability to predict possible reduction in crop yield. Moreover, the results highlighted that the effect of temperature increase on pollen thermotolerance should be evaluated in combination with other environmental factors such as humidity conditions. The screening of olive cultivars based on pollen thermotolerance is critical in the ongoing climate change scenario, especially considering that the economic value of this species relies on successful fertilization and embryo development, and also that production cycle of Olea europaea can be longer than a hundred years. [ABSTRACT FROM AUTHOR]

Heat stress is a major limiting factor for crop productivity. Tomato is highly sensitive to heat stress, which can result in a total yield loss. To adapt to current and future heat stress, there is a dire need to develop heat tolerant cultivars. Here, we review recent attempts to improve screening for heat tolerance and to exploit genetic and genomic resources in tomatoes. We provide key factors related to phenotyping environments and traits (morphological, physiological, and metabolic) to be considered to identify and breed thermo-tolerant genotypes. There is significant variability in tomato germplasm that can be harnessed to breed for thermo-tolerance. Based on our review, we propose that the use of advanced backcross populations and chromosome segments substitution lines is the best means to exploit variability for heat tolerance in non-cultivated tomato species. We applied a meta quantitative trait loci (MQTL) analysis on data from four mapping experiments to co-localize QTL associated with heat tolerance traits (e.g., pollen viability, number of pollen, number of flowers, style protrusion, style length). The analysis revealed 13 MQTL of which 11 were composed of a cluster of QTL. Overall, there was a reduction of about 1.5-fold in the confidence interval (CI) of the MQTL (31.82 cM) compared to the average CI of individual QTL (47.4 cM). This confidence interval is still large and additional mapping resolution approaches such as association mapping and multi-parent linkage mapping are needed. Further investigations are required to decipher the genetic architecture of heat tolerance surrogate traits in tomatoes. Genomic selection and new breeding techniques including genome editing and speed breeding hold promise to fast-track development of improved heat tolerance and other farmer- and consumer-preferred traits in tomatoes. [ABSTRACT FROM AUTHOR]