Search

Permanent magnet synchronous machines (PMSMs) have garnered increasing interest because of their advantages such as high efficiency, high power density, wide speed range, and fast dynamics. They have been employed recently in several industrial applications including robotics and electric vehicles (EVs). However, PMSMs have highly nonlinear magnetic characteristics, especially interior PMSMs, due to the existence of reluctance torque. Nonlinearity complicates not only machine modeling but also control algorithms. An accurate machine model is the key aspect for the prediction of machine performance as well as the development of a high-performance control algorithm. Hence, this paper presents an accurate modelling method for PMSMs. The proposed model method is applicable for all PMSMs, even multiphase machines. This paper considers a fractional slot concentrated winding 12/10 interior PMSM (IPMSM) for this study to demonstrate the effect of magnetic saturation and special harmonics. The developed model considers accurately the magnetic saturation, mutual coupling, spatial harmonics, and iron loss effects. It utilizes finite element analysis (FEA) to estimate the precise magnetic characteristics of IPMSM. The finite element model is calibrated precisely using experimental measurements. The iron losses are estimated within the simulation model as d- and q-axes current components. The model accuracy is validated experimentally based on a 12/10 IPMSM prototype. [ABSTRACT FROM AUTHOR]

Oriented steel has higher permeability and lower losses in the direction of orientation (the rolling direction) than non-oriented steel. However, in the transverse direction, oriented steel typically has lower permeability and higher losses. The strategic use of oriented steel in a modular Permanent Magnet Synchronous Machine (PMSM) stator can improve machine performance, particularly when compared to a machine designed with non-oriented steel, by increasing both torque and efficiency. Typically, steel manufacturers provide magnetic properties only in the rolling and transverse directions. Furthermore, in modern Finite Element Analysis (FEA) software, the magnetic properties between the rolling and transverse directions are interpolated using an intrinsic mathematical model. However, this interpolation method has proven to be inaccurate; to resolve this issue, an improved model was proposed in the literature. This model requires the magnetic properties of the oriented steel in between the rolling and transverse directions. Therefore, a procedure for extracting the magnetic properties of oriented steel is required. The objective of this work is to propose a method of determining the magnetic properties of oriented steel beyond just the oriented and transverse directions. In this method, flux-injecting probes, also known as sensors, are used to inject and control the flux density in an oriented steel segmented stator in order to extract the properties of the oriented steel. These extracted properties are then used to model an oriented steel modular stator PMSM. The machine's average torque and core losses are compared with conventional, non-modular, non-oriented steel stator PMSM, and modular, non-oriented steel stator PMSM. It is shown that both the average torque and the core loss of the oriented steel modular stator PMSM have better performance at the selected number of segments than either of the two non-oriented steel stators. [ABSTRACT FROM AUTHOR]

Currently, there is increasing research interest in harnessing wind energy for power generation by means of non-conventional electrical machines e.g., flux-reversal machines. The flux reversal machine is usually designed using scarce rare–earth permanent magnet material which may be unattractive in terms of machine cost. In this study, an attempt is made to re-design the flux reversal machine with non-rare-earth ferrite permanent magnet for wind energy applications. Because these machines possess high cogging torque, which results in vibration and noise, that are detrimental to the machine performance, especially at low speeds, a novel combined skewed and circumferential rotor pole pairing method is developed. The proposed cogging torque reduction method is implemented in 2-dimensional finite element analysis modeling and comparatively analyzed with other existing stand-alone methods viz., skewing, and rotor pole pairing. The results show that the proposed method led to 94.8% and 71% reduction in the cogging torque and torque ripple compared to the reference generator, respectively. However, the calculated torque density is reduced by 13%. Overall, the electromagnetic performance of the proposed ferrite PM machine exhibits desirable qualities as an alternative design for the direct drive wind generator. [ABSTRACT FROM AUTHOR]