Search

The genus Trichoderma holds economic significance due to its widespread distribution and diverse applications, including biological control, enzyme production, and various biotechnological uses. The accurate identification of Trichoderma species is crucial given their close association with human activities. Despite previous efforts in classification, a comprehensive analysis combining morphological and molecular approaches is necessary. This study focuses on the isolation of four Trichoderma species from industrial wastewater in Pakistan, expanding on the known diversity in the region; isolation involved collecting samples from industrial wastewater effluents at specific sites in Punjab, Pakistan. Trichoderma strains were cultured and purified on solid media, with subsequent biomass production for bisorptional activity. Morphological characterization included colony features and microscopic examinations. DNA extraction, polymerase chain reaction (PCR), and sequencing of the internal transcribed spacer (ITS) region were conducted for molecular analysis. Phylogenetic analysis was performed using the Maximum Likelihood Algorithm. The study identified three Trichoderma species, viz. T. citrinoviride, T. erinaceum, and T. longibrachiatum. Each species was characterized morphologically and supported by molecular–phylogenetic analysis. Illustrations of microscopic features and a phylogenetic tree based on the ITS-nrDNA region were recorded. T. citrinoviride and T. longibrachiatum, isolated from steel mill and tanneries wastewater, respectively, were differentiated based on morphological characteristics such as phialides and conidia. The combination of morphological and molecular techniques enhances the accuracy of species identification. The study highlights the significance of Trichoderma in industrial wastewater environments and underscores the need for continued research in this area. Future research should focus on exploring the ecological roles and potential applications of the newly identified Trichoderma species. Additionally, further investigations into the biotechnological potential of these species, including enzyme production and bioremediation capabilities, would contribute to their practical applications. [ABSTRACT FROM AUTHOR]

Obtaining natural pigments from microorganisms is an alternative with high potential for biotechnological application. The use of agro-industrial wastes as substrate for cultivations enables a reduction of the production cost and may add value to potentially polluting byproducts. In this work, the extraction of pigments produced by the bacterium Chryseobacterium sp. strain kr6 was evaluated, employing feather meal as the sole carbon source for bacterial growth. The maximum production of the yellow pigments was observed for cultivation at 30 °C, during 48 h, with 5 g/L feather meal. The pigment extraction from the bacterial biomass was performed with the aid of physical methods and the testing of different organic solvents. The conditions that provided better extraction were using ultrasound with acetone as the solvent, reaching a yield of 180 μg/g biomass after optimization. The pigment was partially characterized via UV-visible, FTIR and mass spectroscopy and CIELAB color parameters, suggesting the presence of molecules belonging to the flexirubin group (aryl polyenes). The antioxidant capacity of the pigment was confirmed via the scavenging of DPPH radical and thiobarbituric acid reactive substances (TBARS) methodologies. Moreover, the pigment extract showed antimicrobial activity against Staphylococcus aureus and Enterococcus faecalis. [ABSTRACT FROM AUTHOR]

Gd/Fe-SnO2 nanopowders as novel photocatalysts for the active removal of Rose Bengal dye and methyl parathion pesticide were synthesized with a low-cost coprecipitation route. The X-ray diffraction analysis of SnO2, Sn0.96Gd0.02Fe0.02O2 and Sn0.94Gd0.02Fe0.04O2 nanopowders proved the formation of a tetragonal phase of tin oxide with average crystallite sizes in the range of 13–18 nm. The Fourier transform infrared (FTIR) spectra of all samples displayed the characteristic absorption bands of SnO2. The nanopowder of the pure SnO2 sample, as seen in its transmission electron microscope (TEM) image, contains spherical-like particles of variable sizes. The TEM images of the Sn0.96Gd0.02Fe0.02O2 and Sn0.94Gd0.02Fe0.04O2 powders revealed the synthesis of fine spherical nanoparticles. Based on the TEM images, the average particle size of the pure, (Gd, 2 wt% Fe) and (Gd, 4 wt% Fe) codoped SnO2 nanopowders was estimated to be 14, 10 and 12 nm, respectively. After the addition of (Gd, 2 wt% Fe) and (Gd, 4 wt% Fe) to the SnO2 structure, the band gap energy of SnO2 was reduced from 3.4 eV to 2.88 and 2.82 eV, respectively. Significantly, the Sn0.96Gd0.02Fe0.02O2 nanocatalyst exhibited a high removal efficiency of 98 and 96% for Rose Bengal dye and methyl parathion pesticide after activation by sunlight for 35 and 48 min, respectively. Furthermore, this catalyst has shown perfect mineralization as well as high stability properties for the treatment of Rose Bengal dye and methyl parathion pesticide. These results suggest the suitability of the Sn0.96Gd0.02Fe0.02O2 nanocatalyst for the treatment of agriculture and industrial effluent under sunlight light energy. [ABSTRACT FROM AUTHOR]

Researchers have focused on deriving environmentally benign materials from biomass waste and converting them into value-added materials. In this study, cellulosic crystals derived from sugarcane bagasse (SCB) are augmented with magnetite (M) nanoparticles. Following the co-precipitation route, the composite was prepared, and then the mixture was subjected to a green microwave solvent-less technique. Various mass ratios of SCB:M (1:1, 2:1, 3:1, 5:1, and 1:2) were prepared and efficiently utilized as photocatalysts. To look at the structural and morphological properties of the prepared samples, X-ray diffraction pattern (XRD), scanning electron microscopy (SEM), and elemental analysis were used to describe the composite fibers. SCB:M augmented with H2O2 as a Fenton reaction was used to eliminate Reactive blue 19 (RB19) from polluted water and was compared with pristine SCB and M. Additionally, the response surface methodology (RSM) statistically located and assessed the optimized parameters. The optimal operating conditions were recorded at pH 2.0 and 3:1 SCB: M with 40 mg/L and 100 mg/L of hydrogen peroxide. However, the temperature increase inhibits the oxidation reaction. The kinetic modeling fit showed the reaction following the second-order kinetic model with an energy barrier of 98.66 kJ/mol. The results show that such photocatalyst behavior is a promising candidate for treating textile effluent in practical applications. [ABSTRACT FROM AUTHOR]

Red mud (RM) is an industrial waste generated in the process of aluminum refinement. The recycling and reusing of RM have become urgent problems to be solved. To explore the feasibility of using RM in geotechnical engineering, this study combined magnesium oxide (MgO) (or calcium oxide (CaO)) with RM as an RM-based binder, which was then used to stabilize the soil. The physical, mechanical, and micro-structural properties of the stabilized soil were investigated. As the content of MgO or CaO in the mixture increased, the unconfined compressive strength (UCS) of the RM-based cementitious materials first increased and then decreased. For the soils stabilized with RM–MgO or RM–CaO, the UCS increased and then decreased, reaching a maximum at RM:MgO = 5:5 or RM:CaO = 8:2. The addition of sodium hydroxide (NaOH) promoted the hydration reaction. The UCS enhancement ranged from 8.09% to 66.67% for the RM–MgO stabilized soils and 204.6% to 346.6% for the RM–CaO stabilized soils. The optimum ratio of the RM–MgO stabilized soil (with NaOH) was 2:8, while that of the RM–CaO stabilized soil (with NaOH) was 4:6. Freeze–thaw cycles reduced the UCS of the stabilized soil, but the resistance of the stabilized soil to freeze–thaw erosion was significantly improved by the addition of RM–MgO or RM–CaO, and the soil stabilized with RM–MgO had better freeze–thaw resistance than that with RM–CaO. The hydrated magnesium silicate generated by the RM–MgO stabilized soil and the hydrated calcium silicate generated by the RM–CaO stabilized soil helped to improve the UCS of the stabilized soil. The freeze–thaw cycles did not weaken the formation of hydration products in the stabilized soil but could result in physical damage to the stabilized soils. The decrease in the UCS of the stabilized soil was mainly due to physical damage. [ABSTRACT FROM AUTHOR]

Some composite materials have been prepared, constituted by a cyclodextrin-bis-urethane-based nanosponge matrix in which a reduced graphene oxide/silver nanoparticles photocatalyst has been dispersed. Different chain extenders were employed for designing the nanosponge supports, in such a way as to decorate their hyper-cross-linked structure with diverse functionalities. Moreover, two different strategies were explored to accomplish the silver loading. The obtained systems were successfully tested as catalysts for the photodegradation of emerging pollutants such as model dyes and drugs. Enhancement of the photoactive species performance (up to nine times), due to the synergistic local concentration effect exerted by the nanosponge, could be assessed. Overall, the best performances were shown by polyamine-decorated materials, which were able to promote the degradation of some particularly resistant drugs. Some methodological issues pertaining to data collection are also addressed. [ABSTRACT FROM AUTHOR]

Polyurethane (PU) is a type of polymer, which exists in various forms in the environment. Very few studies are available concerning the structure or enzymatic mechanism of the microbial community, which can degrade PU. Degradation of PU remains a difficult problem with respect to the environmental and biological disciplines. This study mainly focused on identifying the micro-organisms able to degrade polyurethane and confirming the degradation by performing a plate assay, Sturm test and scanning electron microscopy. Optimal culture conditions for maximum PU degradation were also analyzed through classical methods. A soil burial test was conducted by placing polyurethane films in the soil for one month, and the microbe growing on the surface of polyurethane films—with a maximum degradation of 55%—was isolated and identified as Aspergillus versicolor (ARF5). The culture medium was also optimized with different physical and chemical parameters for maximum PU degradation. The presence of CO2 as a by-product of PU biodegradation was confirmed through the Sturm test. [ABSTRACT FROM AUTHOR]

We have developed an innovative thin-film nanocomposite membrane that contains cellulose acetate (CA) with small amounts of TiO2-decorated graphene oxide (GO) (ranging from 0.5 wt.% to 2 wt.%) sandwiched between two polytetrafluoroethylene (PTFE)-like thin films. The PTFE-like films succeeded in maintaining the bulk porosity of the support while increasing the thermal and chemical robustness of the membrane and boosting the catalytic activity of TiO2 nanoparticles. The membranes exhibited a specific chemical composition and bonding, with predominant carbon–oxygen bonds from CA and GO in the bulk, and carbon–fluorine bonds on their PTFE-like coated sides. We have also tested the membranes' photocatalytic activities on azithromycin-containing wastewaters, demonstrating excellent efficiency with more than 80% degradation for 2 wt.% TiO2-decorated GO in the CA-GO-TiO2/PTFE-like membranes. The degradation of the azithromycin formulation occurs in two steps, with reaction rates being correlated to the amount of GO-TiO2 in the membranes. [ABSTRACT FROM AUTHOR]

The high-temperature composite phase change materials (HCPCMs) were prepared from solid waste blast furnace slag (BFS) and NaCl-KCl binary eutectic salt to achieve efficient and cost-effective utilization. To ensure good chemical compatibility with chlorine salt, modifier fly ash (FA) was incorporated and subjected to high-temperature treatment for the processing of industrial solid waste BFS, which possesses a complex chemical composition. The HCPCMs were synthesized through a three-step process involving static melting, solid waste modification, and mixing–cold pressing–sintering. Then, the influence of the modification method and the amount of SiC thermal conductivity reinforced material on chemical compatibility and thermodynamic performance was explored. The results demonstrate that the predominant phase of the modified solid waste is Ca2Al2SiO7, which exhibits excellent chemical compatibility with chlorine salt. HCPCMs containing less than 50 wt.% chloride content exhibit good morphological stability without any cracks, with a melting temperature of 661.76 °C and an enthalpy value of 108.73 J/g. Even after undergoing 60 thermal cycles, they maintain good chemical compatibility, with leakage rates for melting and solidification enthalpies being only 6.3% and 0.23%, respectively. The equilibrium was achieved when 40 wt.% of chloride salt was encapsulated upon the addition of 10% of SiC, and the incorporation of SiC resulted in an enhancement of thermal conductivity for HCPCMs to 2.959 W/(m·K) at room temperature and 2.400 W/(m·K) at 200 °C, with an average increase of about 2 times. The cost of the prepared HCPCMs experienced a significant reduction of 81.3%, demonstrating favorable economic performance and promising prospects for application. The research findings presented in this article can offer significant insights into the efficient utilization of solid waste. [ABSTRACT FROM AUTHOR]

The use of economic instruments within environmental policy has become a challenging topic for policymakers, governments and scholars. Environmental taxes have emerged as a prevailing preference in developed countries to promote sustainability. Recently, a particular focus has been given to waste generation and disposal, shifting the attention from greenhouse gases to another important source of environmental pollution. This paper investigates the effect of national environmental taxes and policies on industrial waste. A fixed effects model is used for 34 countries across Europe from 2004 to 2022. The results suggest that environmental taxes and energy policies reduce industrial (hazardous and non-hazardous) waste. However, environmental tax reforms should take into consideration the deterioration in environmental quality, the increase in economic costs and undesirable social consequences. [ABSTRACT FROM AUTHOR]

Waste management is one of the many major challenges faced by all urban cities around the world. With the increase in population, the current mechanisms for waste collection and disposal are under strain. The waste management problem is a global challenge that requires a collaborative effort from different stakeholders. Moreover, there is a need to develop technology-based solutions besides engaging the communities and establishing novel policies. While there are several challenges in waste management, the collection of waste using the current infrastructure is among the top challenges. Waste management suffers from issues such as a limited number of collection trucks, different types of household and industrial waste, and a low number of dumping points. The focus of this paper is on utilizing the available waste collection transportation capacity to efficiently dispose of the waste in a time-efficient manner while maximizing toxic waste disposal. A novel knapsack-based technique is proposed that fills the collection trucks with waste bins from different geographic locations by taking into account the amount of waste and toxicity in the bins using IoT sensors. Using the Knapsack technique, the collection trucks are loaded with waste bins up to their carrying capacity while maximizing their toxicity. The proposed model was implemented in MATLAB, and detailed simulation results show that the proposed technique outperforms other waste collection approaches. In particular, the amount of high-priority toxic waste collection was improved up to 47% using the proposed technique. Furthermore, the number of waste collection visits is reduced in the proposed scheme as compared to the conventional method, resulting in the recovery of the equipment cost in less than a year. [ABSTRACT FROM AUTHOR]

Alkali-activated materials are gaining much interest due to their outstanding performance, including their great resistance to chemical corrosion, good thermal characteristics, and ability to valorise industrial waste materials. Reusing waste glasses in creating alkali-activated materials appears to be a viable option for more effective solid waste utilisation and lower-cost products. However, very little research has been conducted on the suitability of waste glass as a prime precursor for alkali activation. This study examines the reuse of seven different types of waste glasses in the creation of geopolymeric and cementitious concretes as sustainable building materials, focusing in particular on how using waste glasses as the raw material in alkali-activated materials affects the durability, microstructures, hydration products, and fresh and hardened properties in comparison with using traditional raw materials. The impacts of several vital parameters, including the employment of a chemical activator, gel formation, post-fabrication curing procedures, and the distribution of source materials, are carefully considered. This review will offer insight into an in-depth understanding of the manufacturing and performance in promising applications of alkali-activated waste glass in light of future uses. The current study aims to provide a contemporary review of the chemical and structural properties of glasses and the state of research on the utilisation of waste glasses in the creation of alkali-activated materials. [ABSTRACT FROM AUTHOR]

Metakaolin-based geopolymers have substantial potential as replacements for cement, but their relatively inferior mechanical properties restrict their application. This paper aims to enhance the mechanical properties of metakaolin-based geopolymers by incorporating appropriate amounts of calcium sources. CaCO3, Ca(OH)2, and CaSO4 are three types of calcium sources commonly found in nature and are widely present in various industrial wastes. Thus, the effects of these three calcium sources on the performance of metakaolin-based geopolymers were studied. Through the analysis of the mechanical properties, heat-release behavior during hydration, hydration products, and microstructure of geopolymers, the effectiveness of the aforementioned calcium sources in improving the performance of metakaolin-based geopolymer was evaluated, and the mechanisms of action were elucidated. The results indicate that the pozzolanic reaction between CH and MK could promote MK hydration and increase the proportion of CASH gel in the hydration products, thereby facilitating the setting of the geopolymer and enhancing its strength. CS could react with the active aluminates in MK to form ettringite, thus forming a higher early strength. CC had a lower reactivity with MK and does not improve the performance of MK-based geopolymers. [ABSTRACT FROM AUTHOR]

Biological wastewater treatment using trickle bed reactors is a commonly known and used solution. One of the key elements of the proper operation of the trickle bed bioreactor is the appropriate selection of biofilm support elements. The respective properties of the bioreactor packing media used can influence, among other things, the efficiency of the treatment process. In this study, the possibility of polyester waste material usage for the preparation of the biofilm support elements was tested. The following properties were checked: adsorption capacity, swelling, surface morphology, microbicidal properties, as well as the possibility of their use in biological wastewater treatment. The tested elements did not adsorb copper nor showed microbicidal properties for bacterial strains Escherichia coli and Staphylococcus aureus as well as fungal strains Aspergillus niger and Chaetomium globosum. The hydrophilic and rough nature of the element surface was found to provide a friendly support for biofilm formation. The durability of the elements before and after their application in the biological treatment process was confirmed by performing tests such as compressive strength, FTIR analysis, hardness analysis and specific surface area measurement. The research confirmed the applicability of the packing elements based on polyester textile waste to the treatment of textile wastewater. The treatment efficiency of the model wastewater stream was above 90%, while in the case of a stream containing 60% actual industrial wastewater it was above 80%. The proposed solution enables the simultaneous management of textile waste and wastewater treatment, which is consistent with the principles of a circular economy. The selected waste raw material is a cheap and easily available material, and the use of the developed packing elements will reduce the amount of polyester materials ending up in landfills. [ABSTRACT FROM AUTHOR]

To improve the in situ soil stabilization, different chemical additives are used (ion exchange compounds, additives based on H2SO4 or vinyl polymers, and organic additives using lignosulfonates). One interesting alternative is the production of additives from various waste materials. The extensive testing of waste-based blends with soil was performed; the mechanical (unconfined compressive strength (UCS)) and hydraulic (capillary rise, water absorption, and frost resistance (FR)) soil properties were measured. The optimization process led to obtaining additive compositions ensuring high strength and sealing properties: by-pass ash from the ceramics industry, waste H2SO4, pyrolytic waxes/oils from waste mixed plastics, waste tires and HDPE, and emulsion from chewing gum waste. For sandy soil, the following additives were the most promising: emulsion from pyrolytic wax (EPW) from waste PE foil (WPEF) with the addition of waste H2SO4, pyrolytic-oil emulsion from waste tires, EPW from waste mixed plastics with the addition of "by-pass" waste ash and NaOH, EPW from WPEF with the addition of NaOH, and EPW from WPEF reaching up to 93% FR, a 79.6% 7-day UCS increase, and a 27.6% of 28-day UCS increase. For clay: EPW from WPEF with the addition of NaOH, EPW from WPEF with the addition of waste H2SO4, and solely EPW from WPEF reaching up to 7.5% FR, an 80.7% 7-day UCS increase, and a 119.1% 28-day UCS increase. [ABSTRACT FROM AUTHOR]

In this paper, two flower-like magnesium silicate nanomaterials were prepared. These and another two commercial magnesium silicate materials were characterized using a scanning electron microscope, the N2 adsorption–desorption method, and other methods. The structure–activity relationship between the adsorption performance of these four magnesium silicate materials and their specific surface area, pore size distribution, and pore structure was compared. The results showed that the 3-FMS modified by sodium dodecyl sulfonate (SDS) had the largest specific surface area and pore size, the best adsorption performance, and the largest experimental equilibrium adsorption capacity (qe,exp) for Co2+, reaching 190.01 mg/g, and Cr3+, reaching 208.89 mg/g. The adsorption behavior of the four materials for Co2+ and Cr3+ both fitted the pseudo-second-order kinetic model and Langmuir adsorption model, indicating that chemical monolayer uniform adsorption was the dominant adsorption process. Among them, the theoretical adsorption capacity (qm) of 3-FMS was the highest, reaching 207.62 mg/g for Co2+ and 230.85 mg/g for Cr3+. Through further research, it was found that the four materials mainly removed Co2+ and Cr3+ through electrostatic adsorption, surface metal ions (Mg2+), and acidic groups (-OH and -SO3H) exchanging with ions in solution. The adsorption performance of two self-made flower-like magnesium silicate materials for Co2+ and Cr3+ was superior to that of two commercial magnesium silicates. [ABSTRACT FROM AUTHOR]

Low P-containing wastewaters (LPWs) exhibit huge P recovery potential, considering their larger volume. P recovery via CaP crystallization using apatite as seed is documented as being potentially well suited for LPWs. However, its responsible mechanisms remain a subject for debate. Taking hydroxyapatite (HAP) as the seed of LPWs, this paper conducted HAP adsorption/dissolution experiments, titration experiments, and P recovery experiments to distinguish the primary responsible mechanism. Results showed that it was HAP dissolution, not P adsorption, that occurred when the initial P concentration was no higher than 5 mg/L, ruling out adsorption mechanism of P recovery from LPWs using HAP as the seed. Significant OH− consumption and rapid P recovery occurred simultaneously within the first 60 s in titration experiments, suggesting CaP crystallization should be responsible for P recovery. Moreover, the continuous increase in P recovery efficiency with seed dosages observed in P recovery experiments seemed to follow well the mechanism of pre-nucleation ion clusters (PNCs) aggregation. During PNCs aggregation, P aggregates with Ca2+ quickly, generating CaP PNCs; then, CaP PNCs aggregate with seed particles, followed by CaP PNCs fusion, and ultimately transform into fines attached to the seed surface. PNCs' aggregation mechanism was further supported by a comparison of seed SEM images before and after P recovery, since denser and smaller rod-shaped fines were observed on the seed surface after P recovery. This study suggests that PNCs' aggregation is the dominant mechanism responsible for the recovery of P from LPWs via CaP crystallization using HAP as the seed. [ABSTRACT FROM AUTHOR]

A mixed metal oxide W-TiO2 nanopowder photocatalyst was prepared by using the sol–gel method with a broad range of elemental compositions x = CW/(CW + CTi), including TiO2 and WO3. The material was structurally characterized and evaluated in adsorption and photocatalytic processes by testing its removal capacity of a representative pollutant methylene blue (MB) in aqueous solutions and under UV-A and sunlight illuminations. The nanopowders appeared to be more effective adsorbents than pure TiO2 and WO3 materials, showing a maximum at 15 mol% W, which was set as the tungsten solubility limit in anatase titania. At the same time, the photocatalytic decomposition of MB peaked at 2 mol% W. The examination of different compositions showed that the most effective MB removal took place at 15 mol% W, which was attributed to the combined action of adsorption and heterogeneous photocatalysis. Moreover, MB decomposition under sunlight was stronger than under UV-A, suggesting photocatalyst activation by visible light. The pollutant removal efficiency of the material with 15 mol% W was enhanced by a factor of ~10 compared to pure TiO2 at the beginning of the process, which shows its high potential for use in depollution processes in emergency cases of a great pollutant leak. As a result, a Wx=0.15-TiO2 catalyst could be of high interest for wastewater purification in industrial plants. [ABSTRACT FROM AUTHOR]

The H 2 O 2 -assisted oxidation by a peroxidase enzyme takes place to help plants maintain the concentrations of organic compounds at physiological levels. Cells regulate the oxidation rate by inhibiting the action of this enzyme. The cells use two inhibitory processes to regulate the enzyme: a noncompetitive substrate inhibitory process and a competitive substrate inhibitory process. Numerous applications of peroxidase have been developed in clinical biochemistry, enzyme immunoassays, the treatment of waste water containing phenolic compounds, the synthesis of various aromatic chemicals, and the removal of peroxide from industrial wastes. The kinetic mechanism of the Spanish broom peroxidase enzyme is a Ping Pong Bi Bi mechanism with the presence of competitive inhibition by substrates. A mathematical model may help in identifying the key mechanism from amongst a set of competing mechanisms. In this study, we developed a fractional mathematical model to describe the H 2 O 2 -supported oxidation by the enzyme Spanish broom peroxidase. Numerical simulations of the model produced results that are consistent with the known behaviour of Spanish broom peroxidase. Finally, some future investigations of the study are briefly indicated as well. [ABSTRACT FROM AUTHOR]

The present work aimed to prepare novel bio-based composites by adding fillers coming from agro-wastes to an acrylate epoxidized soybean oil (AESO) resin, using liquid crystal display (LCD) 3D printing. Different photocurable formulations were prepared by varying the reactive diluents, iso-bornyl methacrylate (IBOMA) and tetrahydrofurfuryl acrylate (THFA). Then, two fillers derived from different industrial wastes, corn (GTF) and wine (WPL-CF) by-products, were added to the AESO-based formulations to develop polymer composites with improved properties. The printability by LCD of the photocurable formulations was widely studied. Bio-based objects with different geometries were realized, showing printing accuracy, layer adhesion, and accurate details. The thermo-mechanical and mechanical properties of the 3D-printed composites were tested by TGA, DMA, and tensile tests. The results revealed that the agro-wastes' addition led to a remarkable increase in the elastic modulus, tensile strength, and glass transition temperature in the glassy state for the systems containing IBOMA and for flexible structures in the rubbery region for systems containing THFA. AESO-based polymers demonstrated tunable properties, varying from rigid to flexible, in the presence of different diluents and biofillers. This finding paves the way for the use of this kind of composite in applications, such as biomedical for the realization of prostheses. [ABSTRACT FROM AUTHOR]

The efficient utilization of waste heat from industrial processes can provide a significant source of energy savings for production plants, as well as be a driver of sustainable operations and the abatement of emissions. Industrial waste heat usually is contained in liquid or gaseous outlet streams. Although the possible ways to utilize waste heat are discussed in a wide variety of papers, these either provide only a general overview of utilization options and opportunities or focus on a narrow range of industrial processes. The aim of the present paper is to discuss the practical aspects of waste heat utilization in the European Union so that the reader can gain perspective on (i) the thermal classification of waste heat, (ii) liquid and gaseous waste streams and their typical temperatures for industrial use cases, (iii) the technical, economic, physical, and environmental aspects barring full utilization of the available waste heat, (iv) waste heat sources in various industries, and (v) standardized equipment and technologies applicable to industrial waste heat utilization, including their advantages, disadvantages, and weak points. [ABSTRACT FROM AUTHOR]

Sewage sludge and red mud, as common industrial waste, have become a research hotspot in the field of achieving carbon peaking and carbon neutrality, reducing carbon emissions, and solving environmental problems. However, their treatment and disposal have always been a difficult problem in the environmental field. Utilizing these two materials for thermal energy storage can not only improve energy utilization efficiency but also further reduce carbon emissions during their treatment process, providing a new approach for sustainable development in the industrial sector. This article summarizes the research progress for the resource recovery of sewage sludge and red mud for direct thermal energy recovery and composite phase change energy storage. After proper treatment, sludge and red mud can be directly used as energy storage materials. In addition, sludge and red mud can be combined with phase change materials to prepare composite materials with an excellent energy storage performance. This composite has broad application prospects in fields such as solar energy utilization and building energy efficiency. However, there are still some challenges and issues in this resource recovery and utilization, such as potential environmental pollution during the treatment process, the long-term stability of energy storage materials, and cost-effectiveness, which require further research and resolution. The purpose of this paper is to evaluate the potential of sewage sludge and red mud as energy storage materials, to explore their feasibility and advantages in practical applications, and to reveal the research progress, technical challenges, and future development directions of these two materials in the field of thermal energy storage. [ABSTRACT FROM AUTHOR]

The decarbonization and decentralization of district heating networks lead to the shared use of on-site resources by multiple stakeholders. The optimal design of prospective equipment in such contexts should take into account the preferences and objectives of each stakeholder. This article focuses on the adaptation of a 4E multicriteria model (the criteria being energy, exergy, economic, and exergoeconomic) to include and compare the stakeholders' performance criteria around the technical design. In addition, two graphical supports are proposed that represent and cross-analyze the different stakeholders' preferred optima. A preliminary implementation of the methodology is illustrated through a study case in France, which features waste heat recovery for district heating utilization. After presenting the results, a discussion is offered on how to complete the methodology with an iterative negotiation procedure to determine the most suitable design. It was concluded, among other considerations, that the relaxation of the stakeholders' optimality requirements can greatly enable the project's feasibility. Such a relaxation could be implemented in the form of a joint consortium. In addition, the results showed that stakeholder relaxations of requirements can lead to new solutions that may outperform the best solutions pre-relaxation. Lastly, perspectives are suggested toward verifying whether relaxed requirements from upstream stakeholders might be more impactful than those of downstream stakeholders. [ABSTRACT FROM AUTHOR]

To address the growing global water demand, it is imperative to implement advanced treatment systems and sustainable alternatives for managing the large amount of waste generated during the water purification process, known as water treatment sludge (WTS). Worldwide, researchers and companies are exploring alternatives and methods for the valorization of WTS as a raw material in other processes. It is urgent that all productive sectors, which contribute significantly to greenhouse gas emissions, adopt this management principle to ensure more sustainable production, contributing to the global goal of climate neutrality. Notably, in civil construction, incorporating WTS as a supplementary cementitious material (SCM) shows great promise, considering that the industrial waste currently used for this purpose is increasingly restricted. The use of WTS as a raw material in the cement industry not only contributes to the reduction of the carbon footprint, but also reduces the high waste load still disposed of in landfills. The emerging applications for WTP sludge are reviewed, with emphasis on its valorization in the civil construction as an SCM. The main characteristics of this waste and their impacts on the environment are also addressed. [ABSTRACT FROM AUTHOR]

The mouth of the Tinto River is located on the southwest coast of the Iberian Peninsula in the northwest of the Gulf of Cadiz. The river flows into an estuarine system shared with the Odiel River, commonly known as the "Ría de Huelva". In the 1960s, a wide area of ancient salt marshes was transformed by a stockpile of industrial wastes of phosphogypsum, reaching a height of 35 m above the level of the salt marsh at its highest point. Two surveys using high-resolution seismic reflection in conjunction with a parametric profiler were carried out in 2016 and 2018. The purpose of these geophysical studies was the realization of a 3D model of the sedimentary units constituting the most recent filling of the estuary. The records present abundant extrusion structures located on the margins of the waste stockpiles, which break the visible stratification of the surficial units of the estuary. In some sectors, these structures have reached the estuarine surface and have, therefore, a morphological expression on the estuarine floor. The origin of these structures is interpreted as a vertical escape of fluidized sediments from lower units caused by overpressure from stacking. [ABSTRACT FROM AUTHOR]

The preparation of an environmentally friendly and efficient flocculant for solid-liquid separation in industrial wastewater is highly important. In this study, a novel cationic flocculant (AL-g-PAMA) was synthesized by a thermal initiation method using alkali lignin (AL) as the main chain and acrylamide (AM) and methacrylamido propyl trimethyl ammonium chloride (MAPTAC) as the grafted side chains. The structure, thermal stability, and surface morphology of the copolymers were investigated by various characterization methods. The results indicated the successful synthesis of AL-g-PAMA. AL-g-PAMA was applied to improve solid-liquid separation in kaolin suspensions. The results showed that AL-g-PAMA had excellent flocculation-sedimentation and dewatering efficiency. When the dosage of AL-g-PAMA #5 was 600.0 g/t(s), the thickness of the compressed layer was 2.2 cm, the floc settling velocity was 24.1 cm/min, and the transmittance of the supernatant was 84.0%. The moisture content of the filter cake decreased from 55.0% to 43.4% after treatment with AL-g-PAMA #5. The results of zeta potential and focused beam reflectance measurement (FBRM) analysis indicated that bridging and electroneutralization were the main flocculation mechanisms. Therefore, this study extends the potential for using lignin as a bioflocculant and provides a feasible approach to efficiently purify high-turbidity wastewater. [ABSTRACT FROM AUTHOR]

This study focuses on using activated fly ash to preparate silica aerogel by the acid solution–alkali leaching method and ambient pressure drying. Additionally, to improve the performance of silica aerogel, C6H16O3Si (KH-570) and CH3Si(CH3O)3 (MTMS) modifiers were used. Finally, this paper investigated the factors affecting the desilication rate of fly ash and analyzed the structure and performance of silica aerogel. The experimental results show that: (1) The factors affecting the desilication rate are ranked as follows: hydrochloric acid concentration > solid–liquid ratio > reaction temperature > reaction time. (2) KH-570 showed the best performance, and when the volume ratio of the silica solution to it was 10:1, the density of silica aerogel reached a minimum of 183 mg/cm3. (3) The optimal process conditions are a hydrochloric acid concentration of 20 wt%, a solid–liquid ratio of 1:4, a reaction time of two hours, and a reaction temperature of 100 °C. (4) The optimal performance parameters of silica aerogel were the thermal conductivity, specific surface area, pore volume, average pore size, and contact angle values, with 0.0421 W·(m·K)−1, 487.9 m2·g−1, 1.107 cm3·g−1, 9.075 nm, and 123°, respectively. This study not only achieves the high-value utilization of fly ash, but also facilitates the effective recovery and utilization of industrial waste. [ABSTRACT FROM AUTHOR]

Citrus fruits are one of the most widely used fruits around the world and are used as raw fruits, but are also processed into products such as beverages, and large amounts of by-products and waste are generated in this process. Globally, disposal of citrus waste (CW) through simple landfilling or ocean dumping can result in soil and groundwater contamination, which can negatively impact ecosystem health. The case of Korea is not much different in that these wastes are simply buried or recycled wastes are used as livestock feed additives. However, there are many reports that CW, which is a waste, has high potential to produce a variety of products that can minimize environmental load and increase added value through appropriate waste management. In this study, we aim to explore the latest developments in the evaluation and valorization of the growing CW green technologies in an effort to efficiently and environmentally transform these CW for resource recovery, sustainability, and economic benefits. Recent research strategies on integrated biorefinery approaches have confirmed that CW can be converted into various bioproducts such as enzymes, biofuels and biopolymers, further contributing to energy security. It was found that more efforts are needed to scale up green recovery technologies and achieve diverse product profiling to achieve zero waste levels and industrial viability. [ABSTRACT FROM AUTHOR]

Heterogeneous photocatalysis–self-Fenton technology is a sustainable strategy for treating organic pollutants in actual water bodies with high-fluent degradation and high mineralization capacity, overcoming the limitations of the safety risks caused by adding external iron sources and hazardous chemicals in the homogeneous Fenton reaction and injecting high-intensity energy fields in photo-Fenton reaction. Herein, a photo-self-Fenton system based on resorcinol–formaldehyde (RF) resin and red mud (RM) was established to generate hydrogen peroxide (H2O2) in situ and transform into hydroxy radical (•OH) for efficient degradation of tetracycline (TC) under visible light irradiation. The capturing experiments and electron spin resonance (ESR) confirmed that the hinge for the enhanced performance of this system is the superior H2O2 yield (499 μM) through the oxygen reduction process (ORR) of the two-step single-electron over the resin and the high concentration of •OH due to activation effect of RM. In addition, the Fe2+/Fe3+ cycles are accelerated by photoelectrons to effectively initiate the photo-self-Fenton reaction. Finally, the possible degradation pathways were proposed via liquid chromatography-mass spectrometry (LC-MS). This study provides a new idea for environmental recovery in a waste-based heterogeneous photocatalytic self-Fenton system. [ABSTRACT FROM AUTHOR]

Industrial wastewater typically contains many organic and inorganic pollutants and is also contaminated by various microorganisms. Microbial species in industrial wastewater have not been extensively investigated. In this experiment, a Klebsiella pneumoniae strain was isolated for the first time from industrial wastewater containing a high concentration of sulfate and phosphate. Mass spectrometry, genetic analysis, and biochemical identification were conducted to understand the genetic and biochemical characteristics of this Klebsiella pneumoniae strain recovered from industrial wastewater. Growth experiments revealed that it exhibited an excellent growth rate in nutrient broth. Further analyses showed that the strain was sensitive to most antibiotics but resistant to chloramphenicol and nitrofurantoin. It also exhibited significant resistance to piperacillin/tazobactam and cefotaxime/clavulanic acid. Resistance gene experiments indicated the presence of gyrA, OqxB, and ParC genes associated with antibiotic resistance in the isolated Klebsiella pneumoniae strain. Proteomics uncovered the following three proteins related to drug resistance: the multi-drug resistant outer membrane protein MdtQ, the multi-drug resistant secretion protein, and the modulator of drug activity B, which are coexistent in Klebsiella pneumoniae. Proteomics and bioinformatics analyses further analyzed the protein composition and functional enrichment of Klebsiella pneumoniae. The isolation of Klebsiella pneumoniae from a high concentration in sulfate and phosphate industrial wastewater provides a new direction for further research on the characteristics and drug resistance traits of industrial wastewater microorganisms and the potential risks they may pose when released into the environment. [ABSTRACT FROM AUTHOR]

The huge demand for sand and gravel resources in road engineering construction leads to excessive consumption of resources and environmental damage. Recycling waste concrete and industrial solid waste as a road material is a promising alternative. In order to explore the application of these solid wastes in the road base, this paper studies the effect of adding lithium slag activated by an alkaline activator, fly ash (FA) and a combination of the two on the compressive strength, splitting strength and shrinkage performance of recycled cement-stabilized macadam mixture (RCSM). The optimum content of recycled aggregate (RA), alkali-activated lithium slag (AALS) and FA in composite-improved RCSM was optimized using a response surface method (Box–Behnken), and the microscopic characteristics of the mixture were analyzed using X-ray diffraction (XRD) and scanning electron microscopy (SEM). The results show that the optimum dosage of AALS, FA and RA determined by the response surface method is 15%, 10% and 40%, respectively. Compared with the cement-stabilized macadam mixture (CSM) with 40% RA, the 28 d compressive strength and 28 d splitting strength of the composite-improved RCSM are increased by 26.8% and 22.9%, respectively, and the dry shrinkage coefficient and average temperature shrinkage coefficient are decreased by 25.8% and 14.8%, respectively. Microscopic tests show that AALS and FA participate in the hydration reaction, generate more hydrated silicate (C-S-H) and ettringite (AFt), refine pores, effectively improve the performance of the internal interface transition zone of the mixture, make the microstructure of the mixture denser, and improve the strength and shrinkage performance of RCSM. This study provides technical support for the reuse of resources and the sustainable development of road construction. [ABSTRACT FROM AUTHOR]

The evolution of regulatory perspectives regarding the health and nutritional properties of industrial hemp-based products (Cannabis sativa L.) has pushed research to focus on the development of new methods for both the extraction and formulation of the bioactive compounds present in hemp extracts. While the psychoactive and medicinal properties of hemp-derived cannabinoid extracts are well known, much less has been investigated on the functional and antimicrobial properties of hemp extracts. Within the hemp value chain, various agricultural wastes and by-products are generated. These materials can be valorised through eco-innovations, ultimately promoting sustainable economic development. In this study, we explored the use of waste from industrial light cannabis production for the extraction of bioactive compounds without the addition of chemicals. The five extracts obtained were tested for their antimicrobial activity on both planktonic and sessile cells of pathogenic strains of the Candida albicans, Candida parapsilosis, and Candida tropicalis species and for their antioxidant activity on HT-29 colon cancer cells under oxidative stress. Our results demonstrated that these extracts display interesting properties both as antioxidants and in hindering the development of fungal biofilm, paving the way for further investigations into the sustainable valorisation of hemp waste for different biomedical applications. [ABSTRACT FROM AUTHOR]

Water scarcity is a significant global issue caused by the prolonged disregard and unsustainable management of this essential resource by both public and private bodies. The dependence on fossil fuels further exacerbates society's bleak environmental conditions. Therefore, it is crucial to explore alternative solutions to preserve our nation's water resources properly and promote the production of biofuels. Research into the utilization of E. crassipes to remove heavy metals and generate biofuels is extensive. The combination of these two lines of inquiry presents an excellent opportunity to achieve sustainable development goals. This study aims to develop a sustainable wastewater treatment system and generate biohydrogen from dry, pulverized E. crassipes biomass. A treatment system was implemented to treat 1 L of industrial waste. The interconnected compartment system was built by utilizing recycled PET bottles to generate biohydrogen by reusing the feedstock for the treatment process. The production of biological hydrogen through dark fermentation, using biomass containing heavy metals as a biohydrogen source, was studied. Cr (VI) and Pb (II) levels had a low impact on hydrogen production. The uncontaminated biomass of E. crassipes displayed a significantly higher hydrogen yield (81.7 mL H2/g glucose). The presence of Cr (IV) in E. crassipes leads to a decrease in biohydrogen yield by 14%, and the presence of Pb (II) in E. crassipes leads to a decrease in biohydrogen yield of 26%. This work proposes a strategy that utilizes green technologies to recover and utilize contaminated water. Additionally, it enables the production of bioenergy with high efficiency, indirectly reducing greenhouse gases. This strategy aligns with international programs for the development of a circular economy. [ABSTRACT FROM AUTHOR]

A study was carried out in a waste sorting plant (WSP) located in France, treating dry recyclable household waste (DRHW) as well as dry recyclable commercial and industrial waste (DRCIW). Stationary and personal inhalable samples were collected in the WSP in order to investigate bioaerosols (sampling on a filter; 2 L/min and 10 L/min) and airborne dust (CIP; 10 L/min). The aim of the study was to assess the extent to which the measurement of concentration, species composition, and particle size distribution contributes to a better assessment of the biological risks associated with exposure. The results confirmed that waste and waste sorting activities are sources of airborne fungi. Indeed, ambient concentrations ranged from 7.3 × 103 to 8.5 × 105 colony-forming units (CFU)/m3 for culturable fungi and up to 4 mg/m3 for dust. Personal exposure to inhalable dust was found up to 3 mg/m3 for dust and ranged from 8.6 × 103 to 1.5 × 106 CFU/m3 for fungi. Airborne fungal communities were found to be dominated by the Penicillium genera in both bioaerosols and settled dust samples, followed by the Aspergillus, Cladosporium, Wallemia, Mucor, and Rhizopus genera. Fungi were carried by particles of aerodynamic diameters, mainly between around 2.0 and 10.0 µm. The findings dealing with size distribution and biodiversity of bioaerosols suggest that employees are exposed to complex bioaerosols during their work and help to make a finer diagnosis of the risks involved, which is often difficult in the absence of any occupational exposure limit (OEL) value for bioaerosols in general. [ABSTRACT FROM AUTHOR]

This paper presents a research program aimed towards developing a method of producing lightweight, porous geopolymer composites for the construction industry based on industrial wastes. A direct method involving the addition of chemicals is currently most commonly used to produce the porous mineral structure of a geopolymer matrix. This relies on a reaction in a highly alkaline environment of the geopolymer to produce a gas (usually hydrogen or oxygen) that forms vesicles and creates a network of pores. This paper demonstrates the feasibility of producing a slag-based geopolymer paste foamed with aluminum powder, taking into account different parameters of fresh paste production: the mixing duration, its speed and the timing of foaming agent addition. The foaming process of the fresh paste in terms of the volumetric changes and temperature development of the fresh paste during the curing of the material are observed. After hardening, the physical properties (density and porosity) as well as the mechanical parameters (compressive strength and work of damage) are determined for the nine manufactured foamed pastes. Image analysis software was used to assess the porosity distribution of the material across the cross-section of the samples. The results enabled the design of the mixing procedure to be adopted during the manufacture of such composites. [ABSTRACT FROM AUTHOR]

The problem of the growing amount of waste polymer materials currently affects virtually every area of the global economy. New actions taken by the E.U. and member states could lead to a reduction in the burden on the natural environment, as well as the reuse of thermoplastic waste. The aim of this study was to analyze the possibility of reusing post-industrial waste (recycled polypropylene—rPP) in order to produce mixtures with original polypropylene (PP) and glass fibers. The research undertaken is characterized by a high level of innovation and was carried out on an industrial scale from industrial waste. The primary goal of the analyses was to determine changes in the properties of the polymer mixtures depending on the amount of recycled polymers. For this purpose, four types of mixtures were prepared, characterized by different degrees of filling with recycled material obtained from big-bag packaging (the filling levels were 0 wt.%, 20 wt.%, 30 wt.%, and 70 wt.%). A detailed analysis of the physical properties of the obtained mixtures was carried out to determine changes in the densities depending on the amount of rPP material. In addition, changes in the MFIs (melt flow indexes), characterizing viscosity changes, were analyzed depending on the amount of secondary raw material used. An analysis of the mechanical properties was also carried out based on static tensile testing, the impact strength (the Charpy method), and the Rockwell hardness test (the M method). The analysis of the thermal changes was performed using the DSC method. The results showed that the composites made of virgin polypropylene (PP GF30) and those made from re-granulates and glass fibers (rPP GF30) are characterized by similar mechanical properties and significantly different processing properties, determined by MFI. This means that the addition of re-granulates significantly affects the processability of the obtained materials, while the addition of glass fibers maintains the basic mechanical properties. [ABSTRACT FROM AUTHOR]

Herein, wheat straw residue and pulping waste liquid were collected from pulping mill and mixed to prepare bio-based granular fuels by using compression molding technology, and to explore the comprehensive utilization of the industrial waste of pulping and papermaking. The effects of pulping waste liquid on granular fuel properties were analyzed systemically. Further study of the function of pulping waste liquid, cellulose and hemicellulose was used to replace wheat straw residue and avoid the interference factors. Therefore, the prediction models of granular fuels were established with influencing factors that included cellulose, hemicellulose and pulping waste liquid. The granular fuels had the best performance with 18.30% solid content of pulping waste liquid. The highest transverse compressive strength of granular fuel was 102.61 MPa, and the activation energy was 81.71 KJ·mol−1. A series of curve fitting prediction models were established to clarify the forming process of granular fuel, and it turned out that the pulping waste liquid could improve the adhesion between solid particles and increase their compression resistance. [ABSTRACT FROM AUTHOR]

Water security and industrial wastewater treatment are significant global concerns. One of the main issues with environmental contamination has been the discharge of dye wastewater from the textile and dye industries, contributing to an ever-growing problem with water pollution, poisoning water supplies, and harming the ecosystem. The traditional approach to wastewater treatment has been found to be inefficient, and biosorption techniques and mechanisms have been proven to be a successful replacement for conventional methods. Recent developments have led to the recognition of fibrous materials as an environmentally friendly option with broad application in several industries, including wastewater treatment. This review explores the potential of fibrous materials produced by the electrospinning technique as adsorbents for wastewater treatment, while at the same time, for the removal of adsorbates such as oil, dyes, heavy metals, and other substances, as reported in the literature. Textile wastewater filtering structures, produced by electrospinning, are summarized and the use of synthetic and natural polymers for this purpose is discussed. The limitations of electrospun textile wastewater filtering structures are also mentioned. Electrospun nanofibrous membranes appear to be a very promising route to filter textile wastewater and therefore contribute to water reuse and to reducing the contamination of water courses. [ABSTRACT FROM AUTHOR]

Integrating waste and industrial by-products into concrete is an alternative way to reduce global cement consumption, enhancing its eco-friendliness. In this context, residues with fly ash have been increasingly utilised. Considering the vulnerability of concrete with fly ash to carbonation and, at the same time, its high resistance to chlorides, it is important to investigate the behaviour of these concretes under their combined actions. For this purpose, an experimental investigation was conducted, studying mortar and concrete specimens with 40% replacement of cement with fly ash. These specimens were subjected to a combination of actions (Cl− and CO2) in two phases: initially through immersion and drying tests, and subsequently through a combination of accelerated tests. Concerning the chloride impact study, free and total chloride profiles were studied. Concerning the impact of carbonation, colourimetric and chemical tests were used. The results demonstrate a significant influence of combined action not only on chloride penetration in cement-based materials with fly ash but also on the development of a carbonation front. Exposure of cement-based materials with fly ash to environments with high Cl− and CO2 content sequentially may lead, on the one hand, to an increase in carbonation resistance. However, on the other hand, it may result in a substantial reduction in chloride penetration resistance. [ABSTRACT FROM AUTHOR]

One of the most significant challenges the world is currently facing is wastewater treatment. A substantial volume of effluents from diverse sources releases numerous pollutants into the water. Among these contaminants, organic pollutants are particularly concerning due to the associated risk of being released into the environment, garnering significant attention. Rapid advancements in agriculture and industry on a global scale generate vast volumes of hazardous organic compounds, which eventually find their way into natural systems. Recently, the release of industrial wastewater has been increasing, due to the progress of numerous businesses. This poses a danger to humans and the environment, leading to environmental contamination. The application of carbon nanocomposites in applied nanotechnology has recently expanded due to their large surface area, substantial pore volume, low preparation cost, and environmental resilience. Expanding the use of nanomaterials in water treatment is essential, as magnetic carbon nanocomposites consistently demonstrate an efficient elimination of pollutants from water solutions. In the current study, we have highlighted the application of magnetic porous carbon nanocomposites in removing organic pollutants from wastewater. [ABSTRACT FROM AUTHOR]

This article explores recent advancements and innovative strategies in biosorption technology, with a particular focus on the removal of heavy metals, such as Cu(II), Pb(II), Cr(III), Cr(VI), Zn(II), and Ni(II), and a metalloid, As(V), from various sources. Detailed information on biosorbents, including their composition, structure, and performance metrics in heavy metal sorption, is presented. Specific attention is given to the numerical values of the adsorption capacities for each metal, showcasing the efficacy of biosorbents in removing Cu (up to 96.4%), Pb (up to 95%), Cr (up to 99.9%), Zn (up to 99%), Ni (up to 93.8%), and As (up to 92.9%) from wastewater and industrial effluents. In addition, the issue of biosorbent deactivation and failure over time is highlighted as it is crucial for the successful implementation of adsorption in practical applications. Such phenomena as blockage by other cations or chemical decomposition are reported, and chemical, thermal, and microwave treatments are indicated as effective regeneration techniques. Ongoing research should focus on the development of more resilient biosorbent materials, optimizing regeneration techniques, and exploring innovative approaches to improve the long-term performance and sustainability of biosorption technologies. The analysis showed that biosorption emerges as a promising strategy for alleviating pollutants in wastewater and industrial effluents, offering a sustainable and environmentally friendly approach to addressing water pollution challenges. [ABSTRACT FROM AUTHOR]

The continuous growth of industrial solid waste production has generated many environmental problems. We evaluated the potential of industrial solid waste as a substitute filler in asphalt mastic, with the aim of increasing the use of sustainable road construction materials. In this study, X-ray fluorescence spectroscopy (XRF) and scanning electron microscopy (SEM) were used to characterize the oxide composition and micromorphology of limestone (LS), red mud (RM), steel slag (SS), and ground granulated blast-furnace slag (GGBFS). Four asphalt mastics containing LS, RM, SS, and GGBFS with a filler-to-binder weight ratio of one were prepared. An evaluation of the rheology and wetting of the solid-waste-filler asphalt mastic was conducted using a frequency sweep, temperature sweep, linear amplitude sweep (LAS), multiple stress creep and recovery (MSCR), and surface free energy (SFE) methods. The results showed that SS increased the complex modulus, elastic component of the asphalt mastic and decreased the nonrecoverable creep compliance at stress levels of 0.1 and 3.2 kPa, which improved the rutting resistance of the asphalt mastic and reduced deformation under high-temperature conditions. The RM and GGBFS increased the fatigue performance of the asphalt mastic under strain loading, enhanced its fatigue life, and maintained good performance under long-term loading. The dispersive component of the SFE parameter of the solid-waste-filler asphalt mastic was larger than the polar component for the largest share of the surface energy composition. The SFE of the asphalt mastic prepared from the industrial solid-waste filler was reduced; however, the difference was insignificant compared to the limestone asphalt mastic. Solid-waste-filler asphalt mastic has performance characteristics, and its actual application can be based on different performance characteristics to select an appropriate solid-waste filler. The results of this study provide new technological solutions for solving the utilization rate of solid waste materials and sustainable road construction in the future. [ABSTRACT FROM AUTHOR]

With the increasing accumulation of alkaline industrial solid waste, the mineralization of CO2 using alkaline industrial solid waste has broad application prospects. Carbide slag is highly alkaline and contains a large amount of calcium elements, making it an excellent material for CO2 mineralization. Our idea was to acquire qualified products and fast kinetics by integrating carbide slag utilization and carbon reduction. The reaction route was divided into two steps: calcium extraction and carbonization. In order to achieve efficient extraction of utilizable calcium, we selected NH4Ac as the extraction agent, which has the advantage of buffer protection and environmental friendliness due to being an acetate radical. The extraction efficiency of utilizable calcium exceeded 90% under the conditions of L/S 20:1 and NH4+/Ca2+ 2:1. In the carbonization process, the crystal forms of CaCO3 synthesized by direct carbonation, acid extraction, and ammonium salt were characterized. The formation mechanism of vaterite in ammonium solution and the influence of impurities (Al3+, Mg2+) on the crystal transformation were revealed. This study provides technical support for using alkaline industrial waste to prepare high-purity vaterite. Therefore, alkaline industrial waste can be efficiently and sustainably utilized through CO2 mineralization. [ABSTRACT FROM AUTHOR]

In this study, the performance of a zero-gap flow-through reactor with three-dimensional (3D) porous Ti/RuO2-TiO2@Pt anodes was systematically investigated for the electrocatalytic oxidation of phenolic wastewater, considering phenol and 4-nitrophenol (4-NP) as the target pollutants. The optimum parameters for the electrochemical oxidation of phenol and 4-NP were examined. For phenol degradation, at an initial concentration of 50 mg/L, initial pH of 7, NaCl concentration of 10.0 g/L, current density of 10 mA/cm2, and retention time of 30 min, the degradation efficiency achieved was 95.05%, with an energy consumption of 15.39 kWh/kg; meanwhile, for 4-NP, the degradation efficiency was 98.42% and energy consumption was 19.21 kWh/kg (at an initial concentration of 40 mg/L, initial pH of 3, NaCl concentration of 10.0 g/L, current density of 10 mA/cm2, and retention time of 30 min). The electrocatalytic oxidation of phenol and 4-NP conformed to the pseudo-first-order kinetics model, and the k values were 0.2562 min−1 and 0.1736 min−1, respectively, which are 1.7 and 3.6-times higher than those of a conventional electrolyzer. Liquid chromatography–mass spectrometry (LC–MS) was used to verify the intermediates formed during the degradation of phenol or 4-NP and a possible degradation pathway was provided. The extremely narrow electrode distance and the flow-through configuration of the zero-gap flow-through reactor were thought to be essential for its lower energy consumption and higher mass transfer efficiency. The zero-gap flow-through reactor with a novel 3D porous Ti/RuO2-TiO2@Pt electrode is a superior alternative for the treatment of industrial wastewater. [ABSTRACT FROM AUTHOR]

Magnetic chitosan nanoparticles, synthesized by in situ precipitation, have been used as adsorbents to remove sulfamethoxazole (SMX), a sulfonamide antibiotic dangerous due to its capacity to enter ecosystems. The adsorption of SMX has been carried out in the presence of tertiary wastewaters from a depuration plant to obtain more realistic results. The effect of pH on the adsorption capacity significantly changed when carrying out the experiments in the presence of wastewater. This change has been explained while taking into account the charge properties of both the antibiotic and the magnetic chitosan. The composition of wastewaters has been characterized and discussed as regards its effect on the adsorption capacity of the magnetic chitosan. The models of Elovich and Freundlich have been selected to describe the adsorption kinetics and the adsorption isotherms, respectively. The analysis of these models has suggested that the adsorption mechanism is based on strong chemical interactions between the SMX and the magnetic chitosan, leading to the formation of an SMX multilayer. [ABSTRACT FROM AUTHOR]

The removal of Cr(VI), a highly-toxic heavy metal, from industrial wastewater is a critical issue in water treatment research. Photocatalysis, a promising technology to solve the Cr(VI) pollution problem, requires urgent and continuous improvement to enhance its performance. To address this need, an electric field-assisted photocatalytic system (PCS) was proposed to meet the growing demand for industrial wastewater treatment. Firstly, we selected PAF-54, a nitrogen-rich porous organic polymer, as the PCS's catalytic material. PAF-54 exhibits a large adsorption capacity (189 mg/g) for Cr(VI) oxyanions through hydrogen bonding and electrostatic interaction. It was then coated on carbon paper (CP) and used as the photocatalytic electrode. The synergy between capacitive deionization (CDI) and photocatalysis significantly promotes the photoreduction of Cr(VI). The photocatalytic performance was enhanced due to the electric field's influence on the mass transfer process, which could strengthen the enrichment of Cr(VI) oxyanions and the repulsion of Cr(III) cations on the surface of PAF-54/CP electrode. In addition, the PCS system demonstrates excellent recyclability and stability, making it a promising candidate for chromium wastewater treatment. [ABSTRACT FROM AUTHOR]

Cascade high-temperature heat pumps (CHTHPs) are often applied to recover low-temperature industrial waste heat owing to their large temperature lift. Through a comprehensive consideration of thermodynamic and economic performance, conventional and advanced exergy and exergoeconomic analyses are employed in this study to evaluate the potential for the improvement in CHTHP systems. The results show that the avoidable endogenous exergy destruction in a CHTHP system accounts for 62.26% of its total exergy destruction, indicating that most of the exergy destruction comes from the components. This suggests that CHTHP systems still have significant potential for improvement. The very low exergoeconomic factor of the total system (only 0.75%) implies that the exergy destruction cost has a great influence on the economic performance of a CHTHP system. The high- and low-temperature compressors are the two components with the highest exergy destruction, accounting for 34.14% and 26.79% of the total exergy destruction in the system, respectively. Moreover, their exergy destruction cost is much larger than that of the other components. Thus, the priorities for improvement should be the high- and low-temperature compressors. The decrease in exergy destruction in compressors produces a reduction in carbon emissions. This comprehensive analysis of thermodynamic and economic performance supplies guidance for the engineering application of CHTHPs in low-temperature waste heat recovery. [ABSTRACT FROM AUTHOR]

The production process of the metallurgical industry generates a significant quantity of hazardous waste. At present, the common disposal method for metallurgical hazardous waste is landfilling, which synchronously leads to the leaching of toxic elements and the loss of valuable metals. This paper presents a comprehensive review of the research progress in the harmless treatment and resource utilization of stainless steel dust/sludge (including stainless steel dust and stainless steel pickling sludge) and aluminum ash (including primary aluminum ash and secondary aluminum dross), which serve as representative hazardous wastes in ferrous metallurgy and nonferrous metallurgy, respectively. Additionally, the general steps involved in the comprehensive utilization of metallurgical hazardous waste are summarized. Finally, this paper provides a prospective analysis on the future development and research trends of comprehensive utilization for metallurgical hazardous waste, aiming to offer a basis for the future harmless, high-value, resource-based treatment of metallurgical hazardous waste and the realization of industrial applications in China. [ABSTRACT FROM AUTHOR]

In this study, we investigated the beneficial effects of grapefruit IntegroPectin, derived from industrial waste grapefruit peels via hydrodynamic cavitation, on microglia cells exposed to oxidative stress conditions. Grapefruit IntegroPectin fully counteracted cell death and the apoptotic process induced by cell exposure to tert-butyl hydroperoxide (TBH), a powerful hydroperoxide. The protective effects of the grapefruit IntegroPectin were accompanied with a decrease in the amount of ROS, and were strictly dependent on the activation of the phosphoinositide 3-kinase (PI3K)/Akt cascade. Finally, IntegroPectin treatment inhibited the neuroinflammatory response and the basal microglia activation by down-regulating the PI3K- nuclear factor kappa-light-chain-enhancer of activated B cells (NF-kB)- inducible nitric oxide synthase (iNOS) cascade. These data strongly support further investigations aimed at exploring IntegroPectin's therapeutic role in in vivo models of neurodegenerative disorders, characterized by a combination of chronic neurodegeneration, oxidative stress and neuroinflammation. [ABSTRACT FROM AUTHOR]

The use of residual microbial biomass from various industries in emerging pollutant removal strategies represents a new area of research in the field. In this case, we examined how to remove reactive dyes from an aqueous solution utilizing a biosorbent made of residual biomass from immobilized Saccharomyces pastorianus (S. pastorianus) in a polymer matrix using a dynamic system. Fluidized bed column biosorption investigations were carried out on a laboratory scale. Brilliant Red HE-3B was chosen as the target molecule. The main parameters considered for this purpose were the flow rate (4.0 mL/min; 6.1 mL/min), initial pollutant concentration (51.2 mg/L; 77.84 mg/L), and biosorbent mass (16 g; 20 g). The experimental data of the fluidized bed study were evaluated by mathematical modeling. The Yoon–Nelson, Bohart–Adams, Clark, and Yan models were investigated for an appropriate correlation with the experimental data. An acceptable fit was obtained for a flow rate of 4 mL/min, an initial pollutant concentration of 51.2 mg/L, and a biosorbent amount of 20 g. The obtained results indicate that the biosorbent can be used efficiently in a dynamic system both for the removal of the studied dye and in extended operations with a continuous flow of wastewater. As a conclusion, the investigated biocomposite material can be considered a viable biosorbent for testing in the removal of reactive dyes from aqueous environments and creates the necessary conditions for the extension of studies toward the application of these types of biosorbents in the treatment of industrial effluents loaded with organic dyes. [ABSTRACT FROM AUTHOR]