Search

The rise of paper electronics has been accelerated due to the public push for sustainability. Electronic waste can potentially be avoided if certain materials in electronic components can be substituted for greener alternatives such as paper. Within this report, it is demonstrated that conductive polymers poly(3,4-ethylenedoxythiophene) (PEDOT), polypyrrole, and polythiophene, can be synthesized by screen printing combined with vapor phase polymerization on paper substrates and further incorporated into functional electronic components. High patterning resolution (100 mu m) is achieved for all conductive polymers, with PEDOT showing impressive sheet resistance values. PEDOT is incorporated as conductive circuitry and as the active material in all-printed electrochromic displays. The conductive polymer circuits allow for functional light emitting diodes, while the electrochromic displays are comparable to commercial displays utilizing PEDOT on plastic substrates., Funding Agencies|Swedish Foundation for Strategic Research [EM16-0002]; Vinnova for the Digital Cellulose Center [2016-05193]; European Union [101008701]

Printed electronic paper identifies its interest in flexible organic electronics and sustainable and clean energy applications because of its straightforward production method, cost-effectiveness, and positive environmental impact. However, current limitations include restricted material thickness and the use of supporting substrate for printing. Here, 2D and 3D electronic patterned paper are fabricated from direct ink writing (DIW) nanocellulose and PEDOT:PSS-based materials using syringe deposition and 3D printing. The conductor patterns are integrated in the bulk of the paper, while non-conductive sections are used as support to form free-standing paper. The strong interface between the patterns of electronic patterned paper gives mechanical stability for practical handling. The conductive paper-based electrode has 202 S cm(-1) and is capable of handling electric current up to 0.7 A, which can be used for high-power devices. Printed supercapacitor papers show high specific energy of 4.05 Wh kg(-1), specific power of 4615 W kg(-1) at 0.06 A g(-1), and capacitance retention above 95% after 2000 cycles. The new design structure of electronic patterned papers presents a solution for additive manufacturing of paper-based composites for supercapacitors, wearable electronics, or sensors for smart packaging.

The rise of paper electronics has been accelerated due to the public push for sustainability. Electronic waste can potentially be avoided if certain materials in electronic components can be substituted for greener alternatives such as paper. Within this report, it is demonstrated that conductive polymers poly(3,4-ethylenedoxythiophene) (PEDOT), polypyrrole, and polythiophene, can be synthesized by screen printing combined with vapor phase polymerization on paper substrates and further incorporated into functional electronic components. High patterning resolution (100 mu m) is achieved for all conductive polymers, with PEDOT showing impressive sheet resistance values. PEDOT is incorporated as conductive circuitry and as the active material in all-printed electrochromic displays. The conductive polymer circuits allow for functional light emitting diodes, while the electrochromic displays are comparable to commercial displays utilizing PEDOT on plastic substrates., Funding Agencies|Swedish Foundation for Strategic Research [EM16-0002]; Vinnova for the Digital Cellulose Center [2016-05193]; European Union [101008701]

The rise of paper electronics has been accelerated due to the public push for sustainability. Electronic waste can potentially be avoided if certain materials in electronic components can be substituted for greener alternatives such as paper. Within this report, it is demonstrated that conductive polymers poly(3,4-ethylenedoxythiophene) (PEDOT), polypyrrole, and polythiophene, can be synthesized by screen printing combined with vapor phase polymerization on paper substrates and further incorporated into functional electronic components. High patterning resolution (100 mu m) is achieved for all conductive polymers, with PEDOT showing impressive sheet resistance values. PEDOT is incorporated as conductive circuitry and as the active material in all-printed electrochromic displays. The conductive polymer circuits allow for functional light emitting diodes, while the electrochromic displays are comparable to commercial displays utilizing PEDOT on plastic substrates., Funding Agencies|Swedish Foundation for Strategic Research [EM16-0002]; Vinnova for the Digital Cellulose Center [2016-05193]; European Union [101008701]

Kundundersökningar har visat att det undersökta pappersbruket bör förbättra sina leveransledtider. En lösning för detta anses vara en förändring av nuvarande produktionsstrategi. Den nuvarande produktionsstrategin är kundorderproduktion och de alternativa strategierna som kommer att undersökas under studien är lagerorderproduktion och hybridsystem. Syftet med studien är att undersöka, jämföra och analysera olika produktionsstrategier (lagerorderproduktion, kundorderproduktion och hybridsystem) samt att utvärdera deras inverkan på lagerstyrningen. För att uppnå syftet har studien baserats på tre frågeställningar: Vilka för- och nackdelar har produktionsstrategierna på färdigvarulagret samt vilka nyckeltal behöver identifieras? Vilka problem gällande produktion- och lagerstyrning stöter en produktionsplanerare i ett pappersbruk på? Vilken påverkan har produktionsstrategierna på färdigvarulagret hos det undersökta pappersbruket utifrån identifierade nyckeltal. Frågeställningarna besvarades genom att utföra en litteraturstudie om olika produktionsstrategier och lagerstyrning. Med hjälp av litteraturstudien har lämpliga nyckeltal identifierats för att analysera inverkan på lagerstyrning. Utöver litteraturstudien har intervjuer utförts för att skapa en bredare förståelse kring hur det undersökta pappersbruket i helhet ser på produktionsstrategier och dess inverkan på lagerstyrning. Slutligen utfördes en deskriptiv analys för att beräkna de identifierade nyckeltalen. Resultatet från första frågeställningen visade att olika produktionsstrategier kan bidra med olika för- och nackdelar. Dessutom anses en fördel vara en bidragande faktor till en nackdel, exempelvis för hybridsystem kan en förbättring av leveranstider medföra till problem med lagerfyllning. Det är viktigt att även ta hänsyn till hur marknaden ser ut och vilka faktorer som kan påverka samt vad kunderna efterfrågar. Resultatet från andra frågeställningen presenterade tre sammanfattande problem från de utförda int, Examensarbetet är utfört vid Institutionen för teknik och naturvetenskap (ITN) vid Tekniska fakulteten, Linköpings universitet

Kundundersökningar har visat att det undersökta pappersbruket bör förbättra sina leveransledtider. En lösning för detta anses vara en förändring av nuvarande produktionsstrategi. Den nuvarande produktionsstrategin är kundorderproduktion och de alternativa strategierna som kommer att undersökas under studien är lagerorderproduktion och hybridsystem. Syftet med studien är att undersöka, jämföra och analysera olika produktionsstrategier (lagerorderproduktion, kundorderproduktion och hybridsystem) samt att utvärdera deras inverkan på lagerstyrningen. För att uppnå syftet har studien baserats på tre frågeställningar: Vilka för- och nackdelar har produktionsstrategierna på färdigvarulagret samt vilka nyckeltal behöver identifieras? Vilka problem gällande produktion- och lagerstyrning stöter en produktionsplanerare i ett pappersbruk på? Vilken påverkan har produktionsstrategierna på färdigvarulagret hos det undersökta pappersbruket utifrån identifierade nyckeltal. Frågeställningarna besvarades genom att utföra en litteraturstudie om olika produktionsstrategier och lagerstyrning. Med hjälp av litteraturstudien har lämpliga nyckeltal identifierats för att analysera inverkan på lagerstyrning. Utöver litteraturstudien har intervjuer utförts för att skapa en bredare förståelse kring hur det undersökta pappersbruket i helhet ser på produktionsstrategier och dess inverkan på lagerstyrning. Slutligen utfördes en deskriptiv analys för att beräkna de identifierade nyckeltalen. Resultatet från första frågeställningen visade att olika produktionsstrategier kan bidra med olika för- och nackdelar. Dessutom anses en fördel vara en bidragande faktor till en nackdel, exempelvis för hybridsystem kan en förbättring av leveranstider medföra till problem med lagerfyllning. Det är viktigt att även ta hänsyn till hur marknaden ser ut och vilka faktorer som kan påverka samt vad kunderna efterfrågar. Resultatet från andra frågeställningen presenterade tre sammanfattande problem från de utförda int, Examensarbetet är utfört vid Institutionen för teknik och naturvetenskap (ITN) vid Tekniska fakulteten, Linköpings universitet

The global efforts in electrifying our society drive the demand for low-cost and sustainable energy storage solutions. In the present work, a novel material concept was investigated to enable fabrication of several 10 meter-long rolls of supercapacitor paper electrodes on a pilot-scale paper machine. The material concept was based on cationized, cellulose-rich wood-derived fibres, conducting polymer PEDOT:PSS, and activated carbon filler particles. Cationic fibres saturated with anionic PEDOT:PSS provide a conducting scaffold hosting the activated carbon, which functions as the active charge-storage material. The response from further additives was systematically investigated for several critical paper properties. Cellulose nanofibrils were found to improve mechanical properties, while carbon black enhanced both the conductivity and the storage capacity of the activated carbon, reaching a specific capacitance of 67 F g(-1). This pilot trial shows that "classical" papermaking methods are fit for the purpose and provides valuable insights on how to further advance bio-based energy storage solutions for large-scale applications., Funding Agencies|Swedish Innovation Agency VINNOVA [2016-05193]; Swedish Foundation for Strategic Research [GMT14-0058]

The global efforts in electrifying our society drive the demand for low-cost and sustainable energy storage solutions. In the present work, a novel material concept was investigated to enable fabrication of several 10 meter-long rolls of supercapacitor paper electrodes on a pilot-scale paper machine. The material concept was based on cationized, cellulose-rich wood-derived fibres, conducting polymer PEDOT:PSS, and activated carbon filler particles. Cationic fibres saturated with anionic PEDOT:PSS provide a conducting scaffold hosting the activated carbon, which functions as the active charge-storage material. The response from further additives was systematically investigated for several critical paper properties. Cellulose nanofibrils were found to improve mechanical properties, while carbon black enhanced both the conductivity and the storage capacity of the activated carbon, reaching a specific capacitance of 67 F g(-1). This pilot trial shows that "classical" papermaking methods are fit for the purpose and provides valuable insights on how to further advance bio-based energy storage solutions for large-scale applications., Funding Agencies|Swedish Innovation Agency VINNOVA [2016-05193]; Swedish Foundation for Strategic Research [GMT14-0058]

The global efforts in electrifying our society drive the demand for low-cost and sustainable energy storage solutions. In the present work, a novel material concept was investigated to enable fabrication of several 10 meter-long rolls of supercapacitor paper electrodes on a pilot-scale paper machine. The material concept was based on cationized, cellulose-rich wood-derived fibres, conducting polymer PEDOT:PSS, and activated carbon filler particles. Cationic fibres saturated with anionic PEDOT:PSS provide a conducting scaffold hosting the activated carbon, which functions as the active charge-storage material. The response from further additives was systematically investigated for several critical paper properties. Cellulose nanofibrils were found to improve mechanical properties, while carbon black enhanced both the conductivity and the storage capacity of the activated carbon, reaching a specific capacitance of 67 F g(-1). This pilot trial shows that "classical" papermaking methods are fit for the purpose and provides valuable insights on how to further advance bio-based energy storage solutions for large-scale applications., Funding Agencies|Swedish Innovation Agency VINNOVA [2016-05193]; Swedish Foundation for Strategic Research [GMT14-0058]

The global efforts in electrifying our society drive the demand for low-cost and sustainable energy storage solutions. In the present work, a novel material concept was investigated to enable fabrication of several 10 meter-long rolls of supercapacitor paper electrodes on a pilot-scale paper machine. The material concept was based on cationized, cellulose-rich wood-derived fibres, conducting polymer PEDOT:PSS, and activated carbon filler particles. Cationic fibres saturated with anionic PEDOT:PSS provide a conducting scaffold hosting the activated carbon, which functions as the active charge-storage material. The response from further additives was systematically investigated for several critical paper properties. Cellulose nanofibrils were found to improve mechanical properties, while carbon black enhanced both the conductivity and the storage capacity of the activated carbon, reaching a specific capacitance of 67 F g(-1). This pilot trial shows that "classical" papermaking methods are fit for the purpose and provides valuable insights on how to further advance bio-based energy storage solutions for large-scale applications., Funding Agencies|Swedish Innovation Agency VINNOVA [2016-05193]; Swedish Foundation for Strategic Research [GMT14-0058]

The global efforts in electrifying our society drive the demand for low-cost and sustainable energy storage solutions. In the present work, a novel material concept was investigated to enable fabrication of several 10 meter-long rolls of supercapacitor paper electrodes on a pilot-scale paper machine. The material concept was based on cationized, cellulose-rich wood-derived fibres, conducting polymer PEDOT:PSS, and activated carbon filler particles. Cationic fibres saturated with anionic PEDOT:PSS provide a conducting scaffold hosting the activated carbon, which functions as the active charge-storage material. The response from further additives was systematically investigated for several critical paper properties. Cellulose nanofibrils were found to improve mechanical properties, while carbon black enhanced both the conductivity and the storage capacity of the activated carbon, reaching a specific capacitance of 67 F g(-1). This pilot trial shows that "classical" papermaking methods are fit for the purpose and provides valuable insights on how to further advance bio-based energy storage solutions for large-scale applications., Funding Agencies|Swedish Innovation Agency VINNOVA [2016-05193]; Swedish Foundation for Strategic Research [GMT14-0058]

Appropriate evaluation and experimental design are fundamental for empirical sciences, particularly in data-driven fields. Due to the successes in computational modeling of languages, for instance, research outcomes are having an increasingly immediate impact on end users. As the gap in adoption by end users decreases, the need increases to ensure that tools and models developed by the research communities and practitioners are reliable, trustworthy, and supportive of the users in their goals. In this position paper, we focus on the issues of evaluating visual text analytics approaches. We take an interdisciplinary perspective from the visualization and natural language processing communities, as we argue that the design and validation of visual text analytics include concerns beyond computational or visual/interactive methods on their own. We identify four key groups of challenges for evaluating visual text analytics approaches (data ambiguity, experimental design, user trust, and "big picture" concerns) and provide suggestions for research opportunities from an interdisciplinary perspective.

Printed paper-based electronics offers solutions to rising energy concerns by supplying flexible, environmentally friendly, low-cost infrastructure for portable and wearable electronics. Herein, we demonstrate a scalable spray-coating approach to fabricate tailored paper poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS)/cellulose nanofibril (CNF) electrodes for all-printed supercapacitors. Layer-by-layer spray deposition was used to achieve high-quality electrodes with optimized electrode thickness. The morphology of these electrodes was analyzed using advanced X-ray scattering methods, revealing that spray-coated electrodes have smaller agglomerations, resulting in a homogeneous film, ultimately suggesting a better electrode manufacturing method than drop-casting. The printed paper-based supercapacitors exhibit an areal capacitance of 9.1 mF/cm(2), which provides enough energy to power electrochromic indicators. The measured equivalent series resistance (ESR) is as low as 0.3 Omega, due to improved contact and homogeneous electrodes. In addition, a demonstrator in the form of a self-powered wearable wristband is shown, where a large-area (90 cm(2)) supercapacitor is integrated with a flexible solar cell and charged by ambient indoor light. This demonstration shows the tremendous potential for sequential coating/printing methods in the scaling up of printed wearables and self-sustaining systems., Funding Agencies|Swedish Foundation for Strategic Research; Knut and Alice Wallenberg Foundation (Wallenberg Wood Science Center); Onnesjo Foundation; EU SYMPHONY project (H2020) [862095]; DESY Strategic Fund (DSF)

In this work, we demonstrate an effective anion capturing in an aqueous medium using a highly porous carbon paper decorated with ZnO nanorods. A sol-gel technique was first employed to form a thin and compact seed layer of ZnO nanoparticles on the dense network of carbon fibers in the carbon paper. Subsequently, ZnO nanorods were successfully grown on the pre-seeded carbon papers using inexpensive chemical bath deposition. The prepared porous electrodes were electrochemically investigated for improved charge storage and stability under long-term operational conditions. The results show effective capacitive deionization with a maximum areal capacitance of 2 mF/cm(2), an energy consumption of 50 kJ per mole of chlorine ions, and an excellent long-term stability of the fabricated C-ZnO electrodes. The experimental results are supported by COMSOL simulations. Besides the demonstrated capacitive desalination application, our results can directly be used to realize suitable electrodes for energy storage in supercapacitors., Funding Agencies|AForsk Foundation [19-725]; Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linkoping University [2009-00971]; Lund University

In this work, we demonstrate an effective anion capturing in an aqueous medium using a highly porous carbon paper decorated with ZnO nanorods. A sol-gel technique was first employed to form a thin and compact seed layer of ZnO nanoparticles on the dense network of carbon fibers in the carbon paper. Subsequently, ZnO nanorods were successfully grown on the pre-seeded carbon papers using inexpensive chemical bath deposition. The prepared porous electrodes were electrochemically investigated for improved charge storage and stability under long-term operational conditions. The results show effective capacitive deionization with a maximum areal capacitance of 2 mF/cm(2), an energy consumption of 50 kJ per mole of chlorine ions, and an excellent long-term stability of the fabricated C-ZnO electrodes. The experimental results are supported by COMSOL simulations. Besides the demonstrated capacitive desalination application, our results can directly be used to realize suitable electrodes for energy storage in supercapacitors., Funding Agencies|AForsk Foundation [19-725]; Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linkoping University [2009-00971]; Lund University

In this work, we demonstrate an effective anion capturing in an aqueous medium using a highly porous carbon paper decorated with ZnO nanorods. A sol-gel technique was first employed to form a thin and compact seed layer of ZnO nanoparticles on the dense network of carbon fibers in the carbon paper. Subsequently, ZnO nanorods were successfully grown on the pre-seeded carbon papers using inexpensive chemical bath deposition. The prepared porous electrodes were electrochemically investigated for improved charge storage and stability under long-term operational conditions. The results show effective capacitive deionization with a maximum areal capacitance of 2 mF/cm(2), an energy consumption of 50 kJ per mole of chlorine ions, and an excellent long-term stability of the fabricated C-ZnO electrodes. The experimental results are supported by COMSOL simulations. Besides the demonstrated capacitive desalination application, our results can directly be used to realize suitable electrodes for energy storage in supercapacitors., Funding Agencies|AForsk Foundation [19-725]; Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linkoping University [2009-00971]; Lund University

In this work, we demonstrate an effective anion capturing in an aqueous medium using a highly porous carbon paper decorated with ZnO nanorods. A sol-gel technique was first employed to form a thin and compact seed layer of ZnO nanoparticles on the dense network of carbon fibers in the carbon paper. Subsequently, ZnO nanorods were successfully grown on the pre-seeded carbon papers using inexpensive chemical bath deposition. The prepared porous electrodes were electrochemically investigated for improved charge storage and stability under long-term operational conditions. The results show effective capacitive deionization with a maximum areal capacitance of 2 mF/cm(2), an energy consumption of 50 kJ per mole of chlorine ions, and an excellent long-term stability of the fabricated C-ZnO electrodes. The experimental results are supported by COMSOL simulations. Besides the demonstrated capacitive desalination application, our results can directly be used to realize suitable electrodes for energy storage in supercapacitors., Funding Agencies|AForsk Foundation [19-725]; Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linkoping University [2009-00971]; Lund University

Printed paper-based electronics offers solutions to rising energy concerns by supplying flexible, environmentally friendly, low-cost infrastructure for portable and wearable electronics. Herein, we demonstrate a scalable spray-coating approach to fabricate tailored paper poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS)/cellulose nanofibril (CNF) electrodes for all-printed supercapacitors. Layer-by-layer spray deposition was used to achieve high-quality electrodes with optimized electrode thickness. The morphology of these electrodes was analyzed using advanced X-ray scattering methods, revealing that spray-coated electrodes have smaller agglomerations, resulting in a homogeneous film, ultimately suggesting a better electrode manufacturing method than drop-casting. The printed paper-based supercapacitors exhibit an areal capacitance of 9.1 mF/cm(2), which provides enough energy to power electrochromic indicators. The measured equivalent series resistance (ESR) is as low as 0.3 Omega, due to improved contact and homogeneous electrodes. In addition, a demonstrator in the form of a self-powered wearable wristband is shown, where a large-area (90 cm(2)) supercapacitor is integrated with a flexible solar cell and charged by ambient indoor light. This demonstration shows the tremendous potential for sequential coating/printing methods in the scaling up of printed wearables and self-sustaining systems., Funding Agencies|Swedish Foundation for Strategic Research; Knut and Alice Wallenberg Foundation (Wallenberg Wood Science Center); Onnesjo Foundation; EU SYMPHONY project (H2020) [862095]; DESY Strategic Fund (DSF)

Printed paper-based electronics offers solutions to rising energy concerns by supplying flexible, environmentally friendly, low-cost infrastructure for portable and wearable electronics. Herein, we demonstrate a scalable spray-coating approach to fabricate tailored paper poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS)/cellulose nanofibril (CNF) electrodes for all-printed supercapacitors. Layer-by-layer spray deposition was used to achieve high-quality electrodes with optimized electrode thickness. The morphology of these electrodes was analyzed using advanced X-ray scattering methods, revealing that spray-coated electrodes have smaller agglomerations, resulting in a homogeneous film, ultimately suggesting a better electrode manufacturing method than drop-casting. The printed paper-based supercapacitors exhibit an areal capacitance of 9.1 mF/cm(2), which provides enough energy to power electrochromic indicators. The measured equivalent series resistance (ESR) is as low as 0.3 Omega, due to improved contact and homogeneous electrodes. In addition, a demonstrator in the form of a self-powered wearable wristband is shown, where a large-area (90 cm(2)) supercapacitor is integrated with a flexible solar cell and charged by ambient indoor light. This demonstration shows the tremendous potential for sequential coating/printing methods in the scaling up of printed wearables and self-sustaining systems., Funding Agencies|Swedish Foundation for Strategic Research; Knut and Alice Wallenberg Foundation (Wallenberg Wood Science Center); Onnesjo Foundation; EU SYMPHONY project (H2020) [862095]; DESY Strategic Fund (DSF)

Printed paper-based electronics offers solutions to rising energy concerns by supplying flexible, environmentally friendly, low-cost infrastructure for portable and wearable electronics. Herein, we demonstrate a scalable spray-coating approach to fabricate tailored paper poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS)/cellulose nanofibril (CNF) electrodes for all-printed supercapacitors. Layer-by-layer spray deposition was used to achieve high-quality electrodes with optimized electrode thickness. The morphology of these electrodes was analyzed using advanced X-ray scattering methods, revealing that spray-coated electrodes have smaller agglomerations, resulting in a homogeneous film, ultimately suggesting a better electrode manufacturing method than drop-casting. The printed paper-based supercapacitors exhibit an areal capacitance of 9.1 mF/cm(2), which provides enough energy to power electrochromic indicators. The measured equivalent series resistance (ESR) is as low as 0.3 Omega, due to improved contact and homogeneous electrodes. In addition, a demonstrator in the form of a self-powered wearable wristband is shown, where a large-area (90 cm(2)) supercapacitor is integrated with a flexible solar cell and charged by ambient indoor light. This demonstration shows the tremendous potential for sequential coating/printing methods in the scaling up of printed wearables and self-sustaining systems., Funding Agencies|Swedish Foundation for Strategic Research; Knut and Alice Wallenberg Foundation (Wallenberg Wood Science Center); Onnesjo Foundation; EU SYMPHONY project (H2020) [862095]; DESY Strategic Fund (DSF)

Printed paper-based electronics offers solutions to rising energy concerns by supplying flexible, environmentally friendly, low-cost infrastructure for portable and wearable electronics. Herein, we demonstrate a scalable spray-coating approach to fabricate tailored paper poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS)/cellulose nanofibril (CNF) electrodes for all-printed supercapacitors. Layer-by-layer spray deposition was used to achieve high-quality electrodes with optimized electrode thickness. The morphology of these electrodes was analyzed using advanced X-ray scattering methods, revealing that spray-coated electrodes have smaller agglomerations, resulting in a homogeneous film, ultimately suggesting a better electrode manufacturing method than drop-casting. The printed paper-based supercapacitors exhibit an areal capacitance of 9.1 mF/cm(2), which provides enough energy to power electrochromic indicators. The measured equivalent series resistance (ESR) is as low as 0.3 Omega, due to improved contact and homogeneous electrodes. In addition, a demonstrator in the form of a self-powered wearable wristband is shown, where a large-area (90 cm(2)) supercapacitor is integrated with a flexible solar cell and charged by ambient indoor light. This demonstration shows the tremendous potential for sequential coating/printing methods in the scaling up of printed wearables and self-sustaining systems., Funding Agencies|Swedish Foundation for Strategic Research; Knut and Alice Wallenberg Foundation (Wallenberg Wood Science Center); Onnesjo Foundation; EU SYMPHONY project (H2020) [862095]; DESY Strategic Fund (DSF)

In this work, we demonstrate an effective anion capturing in an aqueous medium using a highly porous carbon paper decorated with ZnO nanorods. A sol-gel technique was first employed to form a thin and compact seed layer of ZnO nanoparticles on the dense network of carbon fibers in the carbon paper. Subsequently, ZnO nanorods were successfully grown on the pre-seeded carbon papers using inexpensive chemical bath deposition. The prepared porous electrodes were electrochemically investigated for improved charge storage and stability under long-term operational conditions. The results show effective capacitive deionization with a maximum areal capacitance of 2 mF/cm(2), an energy consumption of 50 kJ per mole of chlorine ions, and an excellent long-term stability of the fabricated C-ZnO electrodes. The experimental results are supported by COMSOL simulations. Besides the demonstrated capacitive desalination application, our results can directly be used to realize suitable electrodes for energy storage in supercapacitors., Funding Agencies|AForsk Foundation [19-725]; Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linkoping University [2009-00971]; Lund University

Early warning systems detect new psychoactive substances (NPS), while dedicated monitoring programs and routine drug and toxicology testing identify fluctuations in prevalence. We report the increasing prevalence of the synthetic cannabinoid receptor agonist (SCRA) ADB-BUTINACA (N-[1-amino-3,3-dimethyl-1-oxobutan-2-yl]-1-butyl-1H-indazole-3-carbox-amide). ADB-BUTINACA was first detected in a seizure in Sweden in 2019, and we report its detection in 13 routine Swedish forensic toxicology cases soon after. In January 2021, ADB-BUTINACA was detected in SCRA-infused papers seized in Scottish prisons and has rapidly increased in prevalence, being detected in 60.4% of the SCRA-infused papers tested between January and July 2021. In this work, ADB-BUTINACA was incubated with human hepatocytes (HHeps), and 21 metabolites were identified in vitro, 14 being detected in authentic case samples. The parent drug and metabolites B9 (mono-hydroxylation on the n-butyl tail) and B16 (mono-hydroxylation on the indazole ring) are recommended biomarkers in blood, while metabolites B4 (dihydrodiol formation on the indazole core), B9, and B16 are suitable biomarkers in urine. ADB-4en-PINACA (N-[1-amino-3,3-dimethyl-1-oxobutan-2-yl]-1-[pent-4-en-1-yl]-1H-indazole-3-carboxamide) was detected in Scottish prisons in December 2020, but, unlike ADB-BUTINACA, prevalence has remained low. ADB-4en-PINACA was incubated with HHeps, and 11 metabolites were identified. Metabolites E3 (dihydrodiol formed in the tail moiety) and E7 (hydroxylation on the linked/head group) are the most abundant metabolites in vitro and are suggested as urinary biomarkers. The in vitro potencies of ADB-BUTINACA (EC50, 11.5 nM and ADB-4en-PINACA (EC50, 11.6 nM) are similar to that of MDMB-4en-PINACA (EC50, 4.3 nM). A third tert-leucinamide SCRA, ADB-HEXINACA was also detected in prison samples and warrants further investigation., Funding Agencies|Linkopings Universitet; Dubai Police Force [2427681]; Leverhulme TrustLeverhulme Trust [RC-2015-01]; Scottish Prison Service [01865]; Linkoping University; VINNOVAVinnova [2019-03566]; European CommissionEuropean CommissionEuropean Commission Joint Research Centre [E! 113377]

Early warning systems detect new psychoactive substances (NPS), while dedicated monitoring programs and routine drug and toxicology testing identify fluctuations in prevalence. We report the increasing prevalence of the synthetic cannabinoid receptor agonist (SCRA) ADB-BUTINACA (N-[1-amino-3,3-dimethyl-1-oxobutan-2-yl]-1-butyl-1H-indazole-3-carbox-amide). ADB-BUTINACA was first detected in a seizure in Sweden in 2019, and we report its detection in 13 routine Swedish forensic toxicology cases soon after. In January 2021, ADB-BUTINACA was detected in SCRA-infused papers seized in Scottish prisons and has rapidly increased in prevalence, being detected in 60.4% of the SCRA-infused papers tested between January and July 2021. In this work, ADB-BUTINACA was incubated with human hepatocytes (HHeps), and 21 metabolites were identified in vitro, 14 being detected in authentic case samples. The parent drug and metabolites B9 (mono-hydroxylation on the n-butyl tail) and B16 (mono-hydroxylation on the indazole ring) are recommended biomarkers in blood, while metabolites B4 (dihydrodiol formation on the indazole core), B9, and B16 are suitable biomarkers in urine. ADB-4en-PINACA (N-[1-amino-3,3-dimethyl-1-oxobutan-2-yl]-1-[pent-4-en-1-yl]-1H-indazole-3-carboxamide) was detected in Scottish prisons in December 2020, but, unlike ADB-BUTINACA, prevalence has remained low. ADB-4en-PINACA was incubated with HHeps, and 11 metabolites were identified. Metabolites E3 (dihydrodiol formed in the tail moiety) and E7 (hydroxylation on the linked/head group) are the most abundant metabolites in vitro and are suggested as urinary biomarkers. The in vitro potencies of ADB-BUTINACA (EC50, 11.5 nM and ADB-4en-PINACA (EC50, 11.6 nM) are similar to that of MDMB-4en-PINACA (EC50, 4.3 nM). A third tert-leucinamide SCRA, ADB-HEXINACA was also detected in prison samples and warrants further investigation., Funding Agencies|Linkopings Universitet; Dubai Police Force [2427681]; Leverhulme TrustLeverhulme Trust [RC-2015-01]; Scottish Prison Service [01865]; Linkoping University; VINNOVAVinnova [2019-03566]; European CommissionEuropean CommissionEuropean Commission Joint Research Centre [E! 113377]

Early warning systems detect new psychoactive substances (NPS), while dedicated monitoring programs and routine drug and toxicology testing identify fluctuations in prevalence. We report the increasing prevalence of the synthetic cannabinoid receptor agonist (SCRA) ADB-BUTINACA (N-[1-amino-3,3-dimethyl-1-oxobutan-2-yl]-1-butyl-1H-indazole-3-carbox-amide). ADB-BUTINACA was first detected in a seizure in Sweden in 2019, and we report its detection in 13 routine Swedish forensic toxicology cases soon after. In January 2021, ADB-BUTINACA was detected in SCRA-infused papers seized in Scottish prisons and has rapidly increased in prevalence, being detected in 60.4% of the SCRA-infused papers tested between January and July 2021. In this work, ADB-BUTINACA was incubated with human hepatocytes (HHeps), and 21 metabolites were identified in vitro, 14 being detected in authentic case samples. The parent drug and metabolites B9 (mono-hydroxylation on the n-butyl tail) and B16 (mono-hydroxylation on the indazole ring) are recommended biomarkers in blood, while metabolites B4 (dihydrodiol formation on the indazole core), B9, and B16 are suitable biomarkers in urine. ADB-4en-PINACA (N-[1-amino-3,3-dimethyl-1-oxobutan-2-yl]-1-[pent-4-en-1-yl]-1H-indazole-3-carboxamide) was detected in Scottish prisons in December 2020, but, unlike ADB-BUTINACA, prevalence has remained low. ADB-4en-PINACA was incubated with HHeps, and 11 metabolites were identified. Metabolites E3 (dihydrodiol formed in the tail moiety) and E7 (hydroxylation on the linked/head group) are the most abundant metabolites in vitro and are suggested as urinary biomarkers. The in vitro potencies of ADB-BUTINACA (EC50, 11.5 nM and ADB-4en-PINACA (EC50, 11.6 nM) are similar to that of MDMB-4en-PINACA (EC50, 4.3 nM). A third tert-leucinamide SCRA, ADB-HEXINACA was also detected in prison samples and warrants further investigation., Funding Agencies|Linkopings Universitet; Dubai Police Force [2427681]; Leverhulme TrustLeverhulme Trust [RC-2015-01]; Scottish Prison Service [01865]; Linkoping University; VINNOVAVinnova [2019-03566]; European CommissionEuropean CommissionEuropean Commission Joint Research Centre [E! 113377]

Early warning systems detect new psychoactive substances (NPS), while dedicated monitoring programs and routine drug and toxicology testing identify fluctuations in prevalence. We report the increasing prevalence of the synthetic cannabinoid receptor agonist (SCRA) ADB-BUTINACA (N-[1-amino-3,3-dimethyl-1-oxobutan-2-yl]-1-butyl-1H-indazole-3-carbox-amide). ADB-BUTINACA was first detected in a seizure in Sweden in 2019, and we report its detection in 13 routine Swedish forensic toxicology cases soon after. In January 2021, ADB-BUTINACA was detected in SCRA-infused papers seized in Scottish prisons and has rapidly increased in prevalence, being detected in 60.4% of the SCRA-infused papers tested between January and July 2021. In this work, ADB-BUTINACA was incubated with human hepatocytes (HHeps), and 21 metabolites were identified in vitro, 14 being detected in authentic case samples. The parent drug and metabolites B9 (mono-hydroxylation on the n-butyl tail) and B16 (mono-hydroxylation on the indazole ring) are recommended biomarkers in blood, while metabolites B4 (dihydrodiol formation on the indazole core), B9, and B16 are suitable biomarkers in urine. ADB-4en-PINACA (N-[1-amino-3,3-dimethyl-1-oxobutan-2-yl]-1-[pent-4-en-1-yl]-1H-indazole-3-carboxamide) was detected in Scottish prisons in December 2020, but, unlike ADB-BUTINACA, prevalence has remained low. ADB-4en-PINACA was incubated with HHeps, and 11 metabolites were identified. Metabolites E3 (dihydrodiol formed in the tail moiety) and E7 (hydroxylation on the linked/head group) are the most abundant metabolites in vitro and are suggested as urinary biomarkers. The in vitro potencies of ADB-BUTINACA (EC50, 11.5 nM and ADB-4en-PINACA (EC50, 11.6 nM) are similar to that of MDMB-4en-PINACA (EC50, 4.3 nM). A third tert-leucinamide SCRA, ADB-HEXINACA was also detected in prison samples and warrants further investigation., Funding Agencies|Linkopings Universitet; Dubai Police Force [2427681]; Leverhulme TrustLeverhulme Trust [RC-2015-01]; Scottish Prison Service [01865]; Linkoping University; VINNOVAVinnova [2019-03566]; European CommissionEuropean CommissionEuropean Commission Joint Research Centre [E! 113377]

Early warning systems detect new psychoactive substances (NPS), while dedicated monitoring programs and routine drug and toxicology testing identify fluctuations in prevalence. We report the increasing prevalence of the synthetic cannabinoid receptor agonist (SCRA) ADB-BUTINACA (N-[1-amino-3,3-dimethyl-1-oxobutan-2-yl]-1-butyl-1H-indazole-3-carbox-amide). ADB-BUTINACA was first detected in a seizure in Sweden in 2019, and we report its detection in 13 routine Swedish forensic toxicology cases soon after. In January 2021, ADB-BUTINACA was detected in SCRA-infused papers seized in Scottish prisons and has rapidly increased in prevalence, being detected in 60.4% of the SCRA-infused papers tested between January and July 2021. In this work, ADB-BUTINACA was incubated with human hepatocytes (HHeps), and 21 metabolites were identified in vitro, 14 being detected in authentic case samples. The parent drug and metabolites B9 (mono-hydroxylation on the n-butyl tail) and B16 (mono-hydroxylation on the indazole ring) are recommended biomarkers in blood, while metabolites B4 (dihydrodiol formation on the indazole core), B9, and B16 are suitable biomarkers in urine. ADB-4en-PINACA (N-[1-amino-3,3-dimethyl-1-oxobutan-2-yl]-1-[pent-4-en-1-yl]-1H-indazole-3-carboxamide) was detected in Scottish prisons in December 2020, but, unlike ADB-BUTINACA, prevalence has remained low. ADB-4en-PINACA was incubated with HHeps, and 11 metabolites were identified. Metabolites E3 (dihydrodiol formed in the tail moiety) and E7 (hydroxylation on the linked/head group) are the most abundant metabolites in vitro and are suggested as urinary biomarkers. The in vitro potencies of ADB-BUTINACA (EC50, 11.5 nM and ADB-4en-PINACA (EC50, 11.6 nM) are similar to that of MDMB-4en-PINACA (EC50, 4.3 nM). A third tert-leucinamide SCRA, ADB-HEXINACA was also detected in prison samples and warrants further investigation., Funding Agencies|Linkopings Universitet; Dubai Police Force [2427681]; Leverhulme TrustLeverhulme Trust [RC-2015-01]; Scottish Prison Service [01865]; Linkoping University; VINNOVAVinnova [2019-03566]; European CommissionEuropean CommissionEuropean Commission Joint Research Centre [E! 113377]

Acute intoxication incidents due to neurotoxic organophosphate (OP) insecticides are occasionally reported, related either to suicidal attempts or occupational exposure due to the misuse of protective equipment. Among them, chlorpyrifos is a compound related to great controversy, which is still authorized and easily accessible in many countries around the world. However, to screen for its exposure markers, instrumental methods are commonly applied, which cannot enable rapid monitoring at an early stage of an intoxication. Therefore, in this study, a microfluidic paper-based analytical device (mu PAD) able to rapidly screen for chlorpyrifos-oxon, the toxic chlorpyrifos metabolite, in human serum was developed and fully validated. The mu PAD combines wax-printed butyrylcholinesterase (BChE) paper sensors, a lab-on-a-chip (LOC) prototype injector and a smartphone as the analytical detector. In principle, the wax-printed strips with adsorbed BChE are embedded into LOC injectors able to deliver samples and reagents on-demand. A smartphone reader was used to monitor the color development on the strips providing binary qualitative results. mu PAD method performance characteristics were thoroughly evaluated in terms of specificity, detection capability (CC beta) and ruggedness. The developed analytical platform is rapid (results within 10 min), cost-efficient (0.70 (sic)), potentially applicable at the point-of-need and attained a low CC beta (10 mu g L-1 in human serum). Finally, mu PAD characteristics were critically compared to wellestablished methods, namely an in-house BChE microplate assay and liquid chromatography tandem mass spectrometry., Funding Agencies|European Unions Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grantEuropean Union (EU) [720325]; METROFOOD-CZ research infrastructure project (MEYS Grant) [LM2018100]; [A2_FPBT_2020_013]

The pulp and paper industry faces several challenges linked to climate and environmental impact, resource efficiency, rising energy prices, increased competition for biomass resources, and declining demand for traditional printed paper products. However, these challenges also offer strategic opportunities for the industry to develop into a competitive, resource-efficient, and low-carbon industry in line with a biobased economy. Against this background, this paper aims to analyse current energy strategies in the pulp and paper industry in Sweden. Specifically, the paper analyses how companies combine continuous process efficiency to reduce energy costs with activities that could be developed into new energy-related products to increase revenue. Most of the analysed companies work to various degrees with both these strategies, employing methods that include improving energy efficiency, energy security, and energy conversion, as well as developing a wide range of biobased energy products. However, our study indicates that there is an untapped potential associated with energy product development, and we conclude that energy efficiency measures can free up resources, enabling the development of new energy products. Finally, several potential managerial outcomes and implications are outlined., Funding: Swedish Energy AgencySwedish Energy Agency [423441]

The pulp and paper industry faces several challenges linked to climate and environmental impact, resource efficiency, rising energy prices, increased competition for biomass resources, and declining demand for traditional printed paper products. However, these challenges also offer strategic opportunities for the industry to develop into a competitive, resource-efficient, and low-carbon industry in line with a biobased economy. Against this background, this paper aims to analyse current energy strategies in the pulp and paper industry in Sweden. Specifically, the paper analyses how companies combine continuous process efficiency to reduce energy costs with activities that could be developed into new energy-related products to increase revenue. Most of the analysed companies work to various degrees with both these strategies, employing methods that include improving energy efficiency, energy security, and energy conversion, as well as developing a wide range of biobased energy products. However, our study indicates that there is an untapped potential associated with energy product development, and we conclude that energy efficiency measures can free up resources, enabling the development of new energy products. Finally, several potential managerial outcomes and implications are outlined., Funding: Swedish Energy AgencySwedish Energy Agency [423441]

Acute intoxication incidents due to neurotoxic organophosphate (OP) insecticides are occasionally reported, related either to suicidal attempts or occupational exposure due to the misuse of protective equipment. Among them, chlorpyrifos is a compound related to great controversy, which is still authorized and easily accessible in many countries around the world. However, to screen for its exposure markers, instrumental methods are commonly applied, which cannot enable rapid monitoring at an early stage of an intoxication. Therefore, in this study, a microfluidic paper-based analytical device (mu PAD) able to rapidly screen for chlorpyrifos-oxon, the toxic chlorpyrifos metabolite, in human serum was developed and fully validated. The mu PAD combines wax-printed butyrylcholinesterase (BChE) paper sensors, a lab-on-a-chip (LOC) prototype injector and a smartphone as the analytical detector. In principle, the wax-printed strips with adsorbed BChE are embedded into LOC injectors able to deliver samples and reagents on-demand. A smartphone reader was used to monitor the color development on the strips providing binary qualitative results. mu PAD method performance characteristics were thoroughly evaluated in terms of specificity, detection capability (CC beta) and ruggedness. The developed analytical platform is rapid (results within 10 min), cost-efficient (0.70 (sic)), potentially applicable at the point-of-need and attained a low CC beta (10 mu g L-1 in human serum). Finally, mu PAD characteristics were critically compared to wellestablished methods, namely an in-house BChE microplate assay and liquid chromatography tandem mass spectrometry., Funding Agencies|European Unions Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grantEuropean Union (EU) [720325]; METROFOOD-CZ research infrastructure project (MEYS Grant) [LM2018100]; [A2_FPBT_2020_013]

Acute intoxication incidents due to neurotoxic organophosphate (OP) insecticides are occasionally reported, related either to suicidal attempts or occupational exposure due to the misuse of protective equipment. Among them, chlorpyrifos is a compound related to great controversy, which is still authorized and easily accessible in many countries around the world. However, to screen for its exposure markers, instrumental methods are commonly applied, which cannot enable rapid monitoring at an early stage of an intoxication. Therefore, in this study, a microfluidic paper-based analytical device (mu PAD) able to rapidly screen for chlorpyrifos-oxon, the toxic chlorpyrifos metabolite, in human serum was developed and fully validated. The mu PAD combines wax-printed butyrylcholinesterase (BChE) paper sensors, a lab-on-a-chip (LOC) prototype injector and a smartphone as the analytical detector. In principle, the wax-printed strips with adsorbed BChE are embedded into LOC injectors able to deliver samples and reagents on-demand. A smartphone reader was used to monitor the color development on the strips providing binary qualitative results. mu PAD method performance characteristics were thoroughly evaluated in terms of specificity, detection capability (CC beta) and ruggedness. The developed analytical platform is rapid (results within 10 min), cost-efficient (0.70 (sic)), potentially applicable at the point-of-need and attained a low CC beta (10 mu g L-1 in human serum). Finally, mu PAD characteristics were critically compared to wellestablished methods, namely an in-house BChE microplate assay and liquid chromatography tandem mass spectrometry., Funding Agencies|European Unions Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grantEuropean Union (EU) [720325]; METROFOOD-CZ research infrastructure project (MEYS Grant) [LM2018100]; [A2_FPBT_2020_013]

Acute intoxication incidents due to neurotoxic organophosphate (OP) insecticides are occasionally reported, related either to suicidal attempts or occupational exposure due to the misuse of protective equipment. Among them, chlorpyrifos is a compound related to great controversy, which is still authorized and easily accessible in many countries around the world. However, to screen for its exposure markers, instrumental methods are commonly applied, which cannot enable rapid monitoring at an early stage of an intoxication. Therefore, in this study, a microfluidic paper-based analytical device (mu PAD) able to rapidly screen for chlorpyrifos-oxon, the toxic chlorpyrifos metabolite, in human serum was developed and fully validated. The mu PAD combines wax-printed butyrylcholinesterase (BChE) paper sensors, a lab-on-a-chip (LOC) prototype injector and a smartphone as the analytical detector. In principle, the wax-printed strips with adsorbed BChE are embedded into LOC injectors able to deliver samples and reagents on-demand. A smartphone reader was used to monitor the color development on the strips providing binary qualitative results. mu PAD method performance characteristics were thoroughly evaluated in terms of specificity, detection capability (CC beta) and ruggedness. The developed analytical platform is rapid (results within 10 min), cost-efficient (0.70 (sic)), potentially applicable at the point-of-need and attained a low CC beta (10 mu g L-1 in human serum). Finally, mu PAD characteristics were critically compared to wellestablished methods, namely an in-house BChE microplate assay and liquid chromatography tandem mass spectrometry., Funding Agencies|European Unions Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grantEuropean Union (EU) [720325]; METROFOOD-CZ research infrastructure project (MEYS Grant) [LM2018100]; [A2_FPBT_2020_013]

Acute intoxication incidents due to neurotoxic organophosphate (OP) insecticides are occasionally reported, related either to suicidal attempts or occupational exposure due to the misuse of protective equipment. Among them, chlorpyrifos is a compound related to great controversy, which is still authorized and easily accessible in many countries around the world. However, to screen for its exposure markers, instrumental methods are commonly applied, which cannot enable rapid monitoring at an early stage of an intoxication. Therefore, in this study, a microfluidic paper-based analytical device (mu PAD) able to rapidly screen for chlorpyrifos-oxon, the toxic chlorpyrifos metabolite, in human serum was developed and fully validated. The mu PAD combines wax-printed butyrylcholinesterase (BChE) paper sensors, a lab-on-a-chip (LOC) prototype injector and a smartphone as the analytical detector. In principle, the wax-printed strips with adsorbed BChE are embedded into LOC injectors able to deliver samples and reagents on-demand. A smartphone reader was used to monitor the color development on the strips providing binary qualitative results. mu PAD method performance characteristics were thoroughly evaluated in terms of specificity, detection capability (CC beta) and ruggedness. The developed analytical platform is rapid (results within 10 min), cost-efficient (0.70 (sic)), potentially applicable at the point-of-need and attained a low CC beta (10 mu g L-1 in human serum). Finally, mu PAD characteristics were critically compared to wellestablished methods, namely an in-house BChE microplate assay and liquid chromatography tandem mass spectrometry., Funding Agencies|European Unions Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grantEuropean Union (EU) [720325]; METROFOOD-CZ research infrastructure project (MEYS Grant) [LM2018100]; [A2_FPBT_2020_013]

Acute intoxication incidents due to neurotoxic organophosphate (OP) insecticides are occasionally reported, related either to suicidal attempts or occupational exposure due to the misuse of protective equipment. Among them, chlorpyrifos is a compound related to great controversy, which is still authorized and easily accessible in many countries around the world. However, to screen for its exposure markers, instrumental methods are commonly applied, which cannot enable rapid monitoring at an early stage of an intoxication. Therefore, in this study, a microfluidic paper-based analytical device (mu PAD) able to rapidly screen for chlorpyrifos-oxon, the toxic chlorpyrifos metabolite, in human serum was developed and fully validated. The mu PAD combines wax-printed butyrylcholinesterase (BChE) paper sensors, a lab-on-a-chip (LOC) prototype injector and a smartphone as the analytical detector. In principle, the wax-printed strips with adsorbed BChE are embedded into LOC injectors able to deliver samples and reagents on-demand. A smartphone reader was used to monitor the color development on the strips providing binary qualitative results. mu PAD method performance characteristics were thoroughly evaluated in terms of specificity, detection capability (CC beta) and ruggedness. The developed analytical platform is rapid (results within 10 min), cost-efficient (0.70 (sic)), potentially applicable at the point-of-need and attained a low CC beta (10 mu g L-1 in human serum). Finally, mu PAD characteristics were critically compared to wellestablished methods, namely an in-house BChE microplate assay and liquid chromatography tandem mass spectrometry., Funding Agencies|European Unions Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grantEuropean Union (EU) [720325]; METROFOOD-CZ research infrastructure project (MEYS Grant) [LM2018100]; [A2_FPBT_2020_013]

The pulp and paper industry faces several challenges linked to climate and environmental impact, resource efficiency, rising energy prices, increased competition for biomass resources, and declining demand for traditional printed paper products. However, these challenges also offer strategic opportunities for the industry to develop into a competitive, resource-efficient, and low-carbon industry in line with a biobased economy. Against this background, this paper aims to analyse current energy strategies in the pulp and paper industry in Sweden. Specifically, the paper analyses how companies combine continuous process efficiency to reduce energy costs with activities that could be developed into new energy-related products to increase revenue. Most of the analysed companies work to various degrees with both these strategies, employing methods that include improving energy efficiency, energy security, and energy conversion, as well as developing a wide range of biobased energy products. However, our study indicates that there is an untapped potential associated with energy product development, and we conclude that energy efficiency measures can free up resources, enabling the development of new energy products. Finally, several potential managerial outcomes and implications are outlined., Funding: Swedish Energy AgencySwedish Energy Agency [423441]

The pulp and paper industry faces several challenges linked to climate and environmental impact, resource efficiency, rising energy prices, increased competition for biomass resources, and declining demand for traditional printed paper products. However, these challenges also offer strategic opportunities for the industry to develop into a competitive, resource-efficient, and low-carbon industry in line with a biobased economy. Against this background, this paper aims to analyse current energy strategies in the pulp and paper industry in Sweden. Specifically, the paper analyses how companies combine continuous process efficiency to reduce energy costs with activities that could be developed into new energy-related products to increase revenue. Most of the analysed companies work to various degrees with both these strategies, employing methods that include improving energy efficiency, energy security, and energy conversion, as well as developing a wide range of biobased energy products. However, our study indicates that there is an untapped potential associated with energy product development, and we conclude that energy efficiency measures can free up resources, enabling the development of new energy products. Finally, several potential managerial outcomes and implications are outlined., Funding: Swedish Energy AgencySwedish Energy Agency [423441]

The pulp and paper industry faces several challenges linked to climate and environmental impact, resource efficiency, rising energy prices, increased competition for biomass resources, and declining demand for traditional printed paper products. However, these challenges also offer strategic opportunities for the industry to develop into a competitive, resource-efficient, and low-carbon industry in line with a biobased economy. Against this background, this paper aims to analyse current energy strategies in the pulp and paper industry in Sweden. Specifically, the paper analyses how companies combine continuous process efficiency to reduce energy costs with activities that could be developed into new energy-related products to increase revenue. Most of the analysed companies work to various degrees with both these strategies, employing methods that include improving energy efficiency, energy security, and energy conversion, as well as developing a wide range of biobased energy products. However, our study indicates that there is an untapped potential associated with energy product development, and we conclude that energy efficiency measures can free up resources, enabling the development of new energy products. Finally, several potential managerial outcomes and implications are outlined., Funding: Swedish Energy AgencySwedish Energy Agency [423441]

Circular economy aims at reducing value loss and avoiding waste, by circulating material or productparts before they become waste. Today, lack of support for sharing data in a secure, quality assured, andautomated way is one of the main obstacles that industry actors point to when attempting to create newcircular value networks. Together with using different terminologies and not having explicit definitions ofthe concepts that appear in data, this makes it very difficult to create new ecosystems of actors in Europetoday. A solution to these challenges needs to leverage open standards for semantic data interoperabilityin establishing a shared vocabulary (ontology network) for data documentation, as well as create adecentralized digital platform that enables collaboration in a secure and confidentiality-preservingmanner. This vocabulary can then be used to construct digital twins of circular value networks to furtherenable open collaboration. Once defined, the blueprints of these digital twins will be reusable as templatesand can be reused with a different set of actors, or used within a different industry domain. This visionincludes a number of open research problems, including the development of ontologies that need to modela wide range of different materials and products, not only providing vertical interoperability but alsohorizontal interoperability, for cross-industry value networks. As well as transdisciplinary research onmethods to find, analyse and assess new circular value chain configurations, and form their decentralizeddigital twins. The solutions will allow for automation of planning, management, and execution of circularvalue networks, at a European scale, and beyond. Thereby supporting the acceleration of the digitaland green transitions, automating the discovery and formation of new collaborations in the circulareconomy.

Ultrathin devices are rapidly developing for skin-compatible medical applications and wearable electronics. Powering skin-interfaced electronics requires thin and lightweight energy storage devices, where solution-processing enables scalable fabrication. To attain such devices, a sequential deposition is employed to achieve all spray-coated symmetric microsupercapacitors (mu SCs) on ultrathin parylene C substrates, where both electrode and gel electrolyte are based on the cheap and abundant biopolymer, cellulose. The optimized spraying procedure allows an overall device thickness of approximate to 11 mu m to be obtained with a 40% active material volume fraction and a resulting volumetric capacitance of 7 F cm(-3). Long-term operation capability (90% of capacitance retention after 10(4) cycles) and mechanical robustness are achieved (1000 cycles, capacitance retention of 98%) under extreme bending (rolling) conditions. Finite element analysis is utilized to simulate stresses and strains in real-sized mu SCs under different bending conditions. Moreover, an organic electrochromic display is printed and powered with two serially connected mu-SCs as an example of a wearable, skin-integrated, fully organic electronic application., Funding Agencies|European Research Council (ERC) under the European Unions Horizon 2020 research and innovation programEuropean Research Council (ERC) [949191]; city council of Brno, Czech Republic

Ultrathin devices are rapidly developing for skin-compatible medical applications and wearable electronics. Powering skin-interfaced electronics requires thin and lightweight energy storage devices, where solution-processing enables scalable fabrication. To attain such devices, a sequential deposition is employed to achieve all spray-coated symmetric microsupercapacitors (mu SCs) on ultrathin parylene C substrates, where both electrode and gel electrolyte are based on the cheap and abundant biopolymer, cellulose. The optimized spraying procedure allows an overall device thickness of approximate to 11 mu m to be obtained with a 40% active material volume fraction and a resulting volumetric capacitance of 7 F cm(-3). Long-term operation capability (90% of capacitance retention after 10(4) cycles) and mechanical robustness are achieved (1000 cycles, capacitance retention of 98%) under extreme bending (rolling) conditions. Finite element analysis is utilized to simulate stresses and strains in real-sized mu SCs under different bending conditions. Moreover, an organic electrochromic display is printed and powered with two serially connected mu-SCs as an example of a wearable, skin-integrated, fully organic electronic application., Funding Agencies|European Research Council (ERC) under the European Unions Horizon 2020 research and innovation programEuropean Research Council (ERC) [949191]; city council of Brno, Czech Republic

Ultrathin devices are rapidly developing for skin-compatible medical applications and wearable electronics. Powering skin-interfaced electronics requires thin and lightweight energy storage devices, where solution-processing enables scalable fabrication. To attain such devices, a sequential deposition is employed to achieve all spray-coated symmetric microsupercapacitors (mu SCs) on ultrathin parylene C substrates, where both electrode and gel electrolyte are based on the cheap and abundant biopolymer, cellulose. The optimized spraying procedure allows an overall device thickness of approximate to 11 mu m to be obtained with a 40% active material volume fraction and a resulting volumetric capacitance of 7 F cm(-3). Long-term operation capability (90% of capacitance retention after 10(4) cycles) and mechanical robustness are achieved (1000 cycles, capacitance retention of 98%) under extreme bending (rolling) conditions. Finite element analysis is utilized to simulate stresses and strains in real-sized mu SCs under different bending conditions. Moreover, an organic electrochromic display is printed and powered with two serially connected mu-SCs as an example of a wearable, skin-integrated, fully organic electronic application., Funding Agencies|European Research Council (ERC) under the European Unions Horizon 2020 research and innovation programEuropean Research Council (ERC) [949191]; city council of Brno, Czech Republic

Ultrathin devices are rapidly developing for skin-compatible medical applications and wearable electronics. Powering skin-interfaced electronics requires thin and lightweight energy storage devices, where solution-processing enables scalable fabrication. To attain such devices, a sequential deposition is employed to achieve all spray-coated symmetric microsupercapacitors (mu SCs) on ultrathin parylene C substrates, where both electrode and gel electrolyte are based on the cheap and abundant biopolymer, cellulose. The optimized spraying procedure allows an overall device thickness of approximate to 11 mu m to be obtained with a 40% active material volume fraction and a resulting volumetric capacitance of 7 F cm(-3). Long-term operation capability (90% of capacitance retention after 10(4) cycles) and mechanical robustness are achieved (1000 cycles, capacitance retention of 98%) under extreme bending (rolling) conditions. Finite element analysis is utilized to simulate stresses and strains in real-sized mu SCs under different bending conditions. Moreover, an organic electrochromic display is printed and powered with two serially connected mu-SCs as an example of a wearable, skin-integrated, fully organic electronic application., Funding Agencies|European Research Council (ERC) under the European Unions Horizon 2020 research and innovation programEuropean Research Council (ERC) [949191]; city council of Brno, Czech Republic

Ultrathin devices are rapidly developing for skin-compatible medical applications and wearable electronics. Powering skin-interfaced electronics requires thin and lightweight energy storage devices, where solution-processing enables scalable fabrication. To attain such devices, a sequential deposition is employed to achieve all spray-coated symmetric microsupercapacitors (mu SCs) on ultrathin parylene C substrates, where both electrode and gel electrolyte are based on the cheap and abundant biopolymer, cellulose. The optimized spraying procedure allows an overall device thickness of approximate to 11 mu m to be obtained with a 40% active material volume fraction and a resulting volumetric capacitance of 7 F cm(-3). Long-term operation capability (90% of capacitance retention after 10(4) cycles) and mechanical robustness are achieved (1000 cycles, capacitance retention of 98%) under extreme bending (rolling) conditions. Finite element analysis is utilized to simulate stresses and strains in real-sized mu SCs under different bending conditions. Moreover, an organic electrochromic display is printed and powered with two serially connected mu-SCs as an example of a wearable, skin-integrated, fully organic electronic application., Funding Agencies|European Research Council (ERC) under the European Unions Horizon 2020 research and innovation programEuropean Research Council (ERC) [949191]; city council of Brno, Czech Republic

Ultrathin devices are rapidly developing for skin-compatible medical applications and wearable electronics. Powering skin-interfaced electronics requires thin and lightweight energy storage devices, where solution-processing enables scalable fabrication. To attain such devices, a sequential deposition is employed to achieve all spray-coated symmetric microsupercapacitors (mu SCs) on ultrathin parylene C substrates, where both electrode and gel electrolyte are based on the cheap and abundant biopolymer, cellulose. The optimized spraying procedure allows an overall device thickness of approximate to 11 mu m to be obtained with a 40% active material volume fraction and a resulting volumetric capacitance of 7 F cm(-3). Long-term operation capability (90% of capacitance retention after 10(4) cycles) and mechanical robustness are achieved (1000 cycles, capacitance retention of 98%) under extreme bending (rolling) conditions. Finite element analysis is utilized to simulate stresses and strains in real-sized mu SCs under different bending conditions. Moreover, an organic electrochromic display is printed and powered with two serially connected mu-SCs as an example of a wearable, skin-integrated, fully organic electronic application., Funding Agencies|European Research Council (ERC) under the European Unions Horizon 2020 research and innovation programEuropean Research Council (ERC) [949191]; city council of Brno, Czech Republic