Search

Background: Late-onset Alzheimer's disease (LOAD) is the most common type of dementia, but its pathogenesis remains unclear, and there is a lack of simple and convenient early diagnostic markers to predict the occurrence. Objective: Our study aimed to identify diagnostic candidate genes to predict LOAD by machine learning methods. Methods: Three publicly available datasets from the Gene Expression Omnibus (GEO) database containing peripheral blood gene expression data for LOAD, mild cognitive impairment (MCI), and controls (CN) were downloaded. Differential expression analysis, the least absolute shrinkage and selection operator (LASSO), and support vector machine recursive feature elimination (SVM-RFE) were used to identify LOAD diagnostic candidate genes. These candidate genes were then validated in the validation group and clinical samples, and a LOAD prediction model was established. Results: LASSO and SVM-RFE analyses identified 3 mitochondria-related genes (MRGs) as candidate genes, including NDUFA1, NDUFS5, and NDUFB3. In the verification of 3 MRGs, the AUC values showed that NDUFA1, NDUFS5 had better predictability. We also verified the candidate MRGs in MCI groups, the AUC values showed good performance. We then used NDUFA1, NDUFS5 and age to build a LOAD diagnostic model and AUC was 0.723. Results of qRT-PCR experiments with clinical blood samples showed that the three candidate genes were expressed significantly lower in the LOAD and MCI groups when compared to CN. Conclusion: Two mitochondrial-related candidate genes, NDUFA1 and NDUFS5, were identified as diagnostic markers for LOAD and MCI. Combining these two candidate genes with age, a LOAD diagnostic prediction model was successfully constructed. [ABSTRACT FROM AUTHOR]

This study delves into a novel approach for energy conservation and environmental pollution reduction through modern environmental art design, guided by the ecological civilization concept and powered by artificial intelligence (AI) technology. The environmental art framework, aligning with the ecological civilization paradigm, is intricately designed. The data acquisition layer employs diverse sensors to gather equipment status, environmental, and pollution data, transmitting it to the executive controller layer via internal WIFI connectivity. The collected data undergoes meticulous analysis and processing within the data layer before reaching the actuator control layer. Leveraging support vector machines in artificial intelligence, the executive controller layer amalgamates the analyzed equipment and environmental data to devise energy-saving equipment and environmental pollution control schemes. Real-time visualization of these outcomes is achieved through the display operation layer. Findings affirm the effectiveness of this method in acquiring pertinent data for modern environmental art design and managing equipment states. Implementation of this approach successfully diminishes power consumption, dust concentration, and formaldehyde levels in the modern environmental art design zone, showcasing its prowess in energy conservation and pollution control. The integration of AI within the ecological civilization framework highlights its potential in fostering sustainable and environmentally conscious practices in modern art creation. [ABSTRACT FROM AUTHOR]

This study proposes a weighted composite approach for grey relational analysis (GRA) that utilizes a numerical weather prediction (NWP) and support vector machine (SVM). The approach is optimized using an improved grey wolf optimization (IGWO) algorithm. Initially, the dimension of NWP data is decreased by t-distributed stochastic neighbor embedding (t-SNE), then the weight of sample coefficients is calculated by entropy-weight method (EWM), and the weighted grey relational of data points is calculated for different weather numerical time series data. At the same time, a new weighted composite grey relational degree is formed by combining the weighted cosine similarity of NWP values of the historical day and to be measured day. The SVM's regression power prediction model is constructed by the time series data. To improve the accuracy of the system's predictions, the grey relational time series data is chosen as the input variable for the SVM, and the influence parameters of the ideal SVM are discovered using the IGWO technique. According to the simulated prediction and analysis based on NWP, it can be observed that the proposed method in this study significantly improves the prediction accuracy of the data. Specifically, evaluation metrics such as root mean squared error (RMSE), regression correlation coefficient (r2), mean absolute error (MAE) and mean absolute percent error (MAPE) all show corresponding enhancements, while the computational burden remains relatively low. [ABSTRACT FROM AUTHOR]

Symptom-based disease identification is crucial to the diagnosis of the disease at the early stage. Usage of traditional stacking and blending models i.e., with default values of the models cannot handle the multi-classification data properly. Some of the existing researchers also implemented tuning with the help of a grid search approach but it consumes more time because it checks all the possible combinations. Suppose if the model has n estimators with k values it needs to check (n*k)! elements combination, this makes the learning time high. The proposed model chooses the estimators to train the model with in a considerable amount of time using an advanced tuning technique known as "Bayes-Search" on an ensemble random forest and traditional, support vector machine. The advantage of this model is its capability to store the best evaluation metrics from the previous model and utilise them to store the new model. This model chooses the values of the estimator based on the probability of selection, which reduces the elements in search space i.e., (< (n-k)!). The proposed model defines the objective function with a minimum error rate and predicts the error rate with the selected estimators for different distributions. The model depending on the predicted value decides whether to store the value or to return the value to the optimizer. The Bayes search optimization has achieved +9.21% accuracy than the grid search approach. Among the two approaches random forest has achieved good accuracy and less loss using Bayes search with cross-validation. [ABSTRACT FROM AUTHOR]

Against the backdrop of increasing global demand for reducing greenhouse gas emissions, promoting the use of energy-saving and environmentally friendly products has become a crucial aspect of low-carbon economic development. Customer satisfaction plays a vital role in the promotion of these products. To address the challenges of dealing with big data in the conventional customer satisfaction analysis tool, Importance Performance Analysis (IPA), a machine learning-based method is proposed to improve IPA. Firstly, the Latent Dirichlet Allocation (LDA) model is used to capture users' opinions on different product topics. Then, the Support Vector Machine (SVM) and Random Forest (RF) algorithms are employed respectively to assess the satisfaction and importance of product attributes, enabling an objective measurement of customer satisfaction and adapting to the current trend of big data. The proposed method is applied to the analysis of water heater satisfaction on the JD platform, obtaining satisfaction levels for 10 topics. The research findings demonstrate that the improved IPA method based on SVM-RF effectively explores customer satisfaction and can provide some improvement strategies for platform managers and manufacturers. [ABSTRACT FROM AUTHOR]

In intrusion detection, the curse of dimensionality and the trade-off between maintaining a low false alarm rate and achieving a high detection rate are significant challenges. This research suggests a unique strategy based on dimensionality reduction methods to improve the performance of network intrusion detection systems (NIDS). Compressing high-dimensional network traffic data using a Long Short-Term Memory Autoencoder (LSTMAE) allows the reduced characteristics to be submitted to a classifier to identify anomalies that may indicate an attack. Using standard datasets, including Network Security Laboratory - Knowledge Discovery in Datasets (NSL-KDD), UNSW-NB15, and Canadian Institute for Cyber Security - Intrusion Detection Systems (CICIDS2017), the proposed model is tested with classifiers like Random Forest (RF) and LightGBM (Light Gradient Boosting Machines). It is hoped that by adopting this method, NIDS response times may be improved while costs associated with storing and processing data are minimized. Precision, recall, F-score, accuracy, detection rate (DR), and false alarm rate (FAR) are only a few of the performance measures used to assess the quality of the suggested models. The experimental findings show that the proposed LSTMAE model reduces prediction errors more effectively than classic machine learning techniques such as Random Forest (RF), Gradient Boosting (GB), Support Vector Machines (SVM), Deep Belief Networks (DBN), Deep Neural Networks (DNN), Autoencoder (AE), and Long Short-Term Memory (LSTM). The results also show that the proposed solution outperforms the state-of-the-art methods of detection accuracy and computing complexity using accuracy, precision, recall, F1_Score, detection rate, and FAR. [ABSTRACT FROM AUTHOR]

In order to achieve the goal of dynamically adjusting daily passenger flow to effectively control the overall efficiency of the transportation system, this study constructs a real-time monitoring and prediction system for subway passenger flow based on front-end voice processing technology and support vector machine models. The study first conducted a railway passenger flow analysis, and then used a support vector machine model to construct a preliminary prediction system. In order to achieve global optimization, the study also introduced particle swarm optimization algorithm to construct an optimization prediction model based on PSO-SVM. The results show that the proposed PSO-SVM method has undergone 48 iterations of training, and the predicted values closely match the actual passenger flow curve. The maximum RE error is 2%, and the overall prediction error is 98%. The decision coefficient of PSO-SVM is 0.998932. Therefore, this indicates that it has high performance and feasibility in predicting and controlling passenger flow during peak hours of urban rail transit. [ABSTRACT FROM AUTHOR]

Parallel Support Vector Machine (SVM) based on big data has achieved some results in data mining, but due to the complexity of the data itself and a large amount of noisy data, its execution efficiency and classification accuracy in the big data environment are very low. In order to eliminate noise, a noise reduction method based on Noise Cleaning (NC) strategy was proposed, and redundant training samples in big data environments were deleted; Introduce an improved Artificial Fish Swarm Algorithm (IAFSA) to obtain the final Parallel SVM algorithm using mutual information and artificial fish swarm algorithm based on MapReduce (MIAFSA-PSVM) classification model. The results indicate that when compared to CMI-PSVM, the execution time of MIAFSA-PSVM algorithm is higher on the NDC dataset with the largest data size, The SVM parameter optimization algorithm based on MapReduce and cuckoo search (CSSVM-MR) and the particle swarm optimization based parallel support vector machine ensemble algorithm (PSO-PSVM) decreased by 40.1%, 79.3%, and 51.7%, respectively. This indicates that GIESVM-MR and MIAFSA-PSVM have strong adaptability to big data environments and high classification accuracy. [ABSTRACT FROM AUTHOR]

BACKGROUND: Digital X-ray imaging is essential for diagnosing osteoporosis, but distinguishing affected patients from healthy individuals using these images remains challenging. OBJECTIVE: This study introduces a novel method using deep learning to improve osteoporosis diagnosis from bone X-ray images. METHODS: A dataset of bone X-ray images was analyzed using a newly proposed procedure. This procedure involves segregating the images into regions of interest (ROI) and non-ROI, thereby reducing data redundancy. The images were then processed to enhance both spatial and statistical features. For classification, a Support Vector Machine (SVM) classifier was employed to distinguish between osteoporotic and non-osteoporotic cases. RESULTS: The proposed method demonstrated a promising Area under the Curve (AUC) of 90.8% in diagnosing osteoporosis, benchmarking favorably against existing techniques. This signifies a high level of accuracy in distinguishing osteoporosis patients from healthy controls. CONCLUSIONS: The proposed method effectively distinguishes between osteoporotic and non-osteoporotic cases using bone X-ray images. By enhancing image features and employing SVM classification, the technique offers a promising tool for efficient and accurate osteoporosis diagnosis. [ABSTRACT FROM AUTHOR]

BACKGROUND: The coronavirus disease 2019 is a serious and highly contagious disease caused by infection with a newly discovered virus, named severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). OBJECTIVE: A Computer Aided Diagnosis (CAD) system to assist physicians to diagnose Covid-19 from chest Computed Tomography (CT) slices is modelled and experimented. METHODS: The lung tissues are segmented using Otsu's thresholding method. The Covid-19 lesions have been annotated as the Regions of Interest (ROIs), which is followed by texture and shape extraction. The obtained features are stored as feature vectors and split into 80:20 train and test sets. To choose the optimal features, Whale Optimization Algorithm (WOA) with Support Vector Machine (SVM) classifier's accuracy is employed. A Multi-Layer Perceptron (MLP) classifier is trained to perform classification with the selected features. RESULTS: Comparative experimentations of the proposed system with existing eight benchmark Machine Learning classifiers using real-time dataset demonstrates that the proposed system with 88.94% accuracy outperforms the benchmark classifier's results. Statistical analysis namely, Friedman test, Mann Whitney U test and Kendall's Rank Correlation Coefficient Test has been performed which indicates that the proposed method has a significant impact on the novel dataset considered. CONCLUSION: The MLP classifier's accuracy without feature selection yielded 80.40%, whereas with feature selection using WOA, it yielded 88.94%. [ABSTRACT FROM AUTHOR]

In this study, an innovative approach that combines least square support vector regression (LSSVR) with uncertainty theory to enhance its performance in dealing with low-quality or imprecise data from real-world be proposed. The resulting model, called uncertain least square support vector regression (ULSSVR), incorporates chance constraints and simplified parameter selection, which are critical to handle imprecise observations. A numerical algorithm called the conjugate residual method (CR) is introduced to reduce the computational complexity of the model solution. The experimental results using both small and medium-sized datasets demonstrate the superior performance of ULSSVR in terms of prediction accuracy and generalization ability compared to other models such as uncertain support vector regression (USVR), uncertain linear lodel, uncertain polynomial model, and uncertain growth models. ULSSVR not only improves prediction accuracy by at least 28.49% but also demonstrates faster computational speed. Overall, ULSSVR presents a promising solution for data science and internet applications where dealing with imprecise and low-quality data is a common challenge. [ABSTRACT FROM AUTHOR]

Video forgery, a prevalent concern in today's digital age, involves the deliberate manipulation of video content, often carried out using sophisticated video editing software. In response to this challenge, the need for an automated approach to detect forged video footage has become increasingly pressing. Our proposed methodology addresses this need by employing a multi-faceted strategy. It begins with the classification of video frames as either originating from genuine sources or having undergone manipulation. To assess the authenticity, the Δ r ¯ s metric is applied to evaluate the coherence of frame sequences. Additionally, we've harnessed the power of machine learning, training a model on a diverse dataset, namely the VIFFD dataset. This robust machine learning approach, particularly the suggested Support Vector Machine (SVM) method, consistently achieves an impressive average accuracy of 94.4%, showcasing its potential as a dependable and effective solution for video forgery detection. In an era where the trustworthiness of video content is of paramount importance, our method emerges as a pivotal safeguard, contributing significantly to the preservation of the integrity and credibility of visual media. [ABSTRACT FROM AUTHOR]

The contemporary real-world datasets often suffer from the problem of class imbalance as well as high dimensionality. For combating class imbalance, data resampling is a commonly used approach whereas for tackling high dimensionality feature selection is used. The aforesaid problems have been studied extensively as independent problems in the literature but the possible synergy between them is still not clear. This paper studies the effects of addressing both the issues in conjunction by using a combination of resampling and feature selection techniques on binary-class imbalance classification. In particular, the primary goal of this study is to prioritize the sequence or pipeline of using these techniques and to analyze the performance of the two opposite pipelines that apply feature selection before or after resampling techniques i.e., F + S or S + F. For this, a comprehensive empirical study is carried out by conducting a total of 34,560 tests on 30 publicly available datasets using a combination of 12 resampling techniques for class imbalance and 12 feature selection methods, evaluating the performance on 4 different classifiers. Through the experiments we conclude that there is no specific pipeline that proves better than the other and both the pipelines should be considered for obtaining the best classification results on high dimensional imbalanced data. Additionally, while using Decision Tree (DT) or Random Forest (RF) as base learner the predominance of S + F over F + S is observed whereas in case of Support Vector Machine (SVM) and Logistic Regression (LR), F + S outperforms S + F in most cases. According to the mean ranking obtained from Friedman test the best combination of resampling and feature selection techniques for DT, SVM, LR and RF are SMOTE + RFE (Synthetic Minority Oversampling Technique and Recursive Feature Elimination), Least Absolute Shrinkage and Selection Operator (LASSO) + SMOTE, SMOTE + Embedded feature selection using RF and SMOTE + RFE respectively. [ABSTRACT FROM AUTHOR]

Alzheimer's disease (AD) is the most prevalent brain disorder which affects millions of people worldwide. Early detection is crucial for possible treatment. In this regard, machine learning (ML) approaches are widely utilized for AD detection. In this paper, we propose an ML-based method that drastically reduces the dimensionality of features while maintaining the relevant features and boosting the overall performance. To remove irrelevant features, first statistical feature extraction method is applied, and then further reduction among remaining features is applied by utilizing the harmony search method (HSM). The selected features are the most informative features that are fed to the different classifiers. To test the effectiveness of the proposed method, we deployed three classification techniques including support vector machine (SVM), k-nearest neighbor (k-NN), and decision tree (DT). The experimental results show that the proposed method has a higher performance while decreasing the dimensionality of feature space. To guarantee that the performance of the proposed method is accurate, we applied an ensemble of three classifiers (SVM, KNN, and DT) for classification. The results of the proposed method verify that this method can be successfully deployed for AD detection, due to its high performance and low dimensional features, and can help improve the accuracy and efficiency of Alzheimer's disease diagnosis. The proposed method demonstrated a significant improvement, achieving high performance in AD/HC classification, with accuracy, sensitivity, specificity, F1-score, MCC, and Cohen's Kappa rates reaching 95.5%, 97%, 94%, 95.56%, 0.9104, and 0.9109, respectively. AD/HC classification displayed the highest performance. Additionally, in the more challenging pMCI/sMCI classification, the method achieved an accuracy of 78.50%, sensitivity of 84.00%, specificity of 73.00%, F1-score of 79.62%, MCC of 0.57, and Cohen's Kappa of 0.59. [ABSTRACT FROM AUTHOR]

In the ever-evolving world of cricket, the T20 format has captured the imaginations of fans worldwide, intensifying the anticipation for match outcomes with each passing delivery. This study explores the realm of predictive analytics, leveraging the power of machine learning to alleviate the suspense by forecasting T20 cricket match winners before the first ball is bowled. Drawing on a rich dataset encompassing factors such as past team performance and rankings, a diverse ensemble of predictive models, including logistic regression, support vector machine (SVM), random forest, decision tree, and XGBoost, is meticulously employed. Among these, the random forest Classifier emerges as the standout performer, boasting an impressive prediction accuracy rate of 84.06%. To assess the real-world applicability of our predictive framework, a post-case study is conducted, focusing on the high-stakes World Cup T20 matches of 2022, where England emerges as the triumphant team. The dataset underpinning this study is meticulously curated from ESPN CricInfo, ensuring the robustness of our analysis. Moreover, this paper extends its contribution by offering a comprehensive comparative analysis, scrutinizing performance metrics such as accuracy, precision, recall, and the F1-score across benchmark machine learning models for cricket match prediction. This in-depth evaluation not only validates the efficacy of our models but also sheds light on their superior execution time and statistical robustness, further bolstering their utility in the realm of cricket outcome forecasting. [ABSTRACT FROM AUTHOR]

Rolling bearings are a key component of rotating machinery and their health directly affects the safe operation of mechanical equipment. Therefore, fault diagnose for rolling bearings is very important. The fault diagnosis process of rolling bearings includes three stages: signal decomposition, feature extraction, and pattern recognition. Variational mode decomposition (VMD) can suppress end effects, but improper parameter settings will cause information losses or excessive decomposition. In this work, an improved whale optimization algorithm (IWOA) is applied to parameter settings of VMD. Correspondingly, an IWOA-VMD signal decomposition method is proposed. The decomposed signal is combined with a Laplace score method and classifier to remove the redundancy and noise in the feature set and obtain a low-dimensional sensitive feature subset. Then, aiming at the problem of the parameter settings of a least squares support vector machine (LSSVM) affecting the recognition performance and accuracy, a salp swarm algorithm (SSA) is used to globally optimize the penalty parameter and kernel width in the LSSVM to establish an SSA-LSSVM fault recognition model. This model is applied to the fault diagnosis of rolling bearings. In particular, rolling bearing fault samples at Case Western Reserve University are used to verify the method. The results indicate that the proposed method is effective and improves the speed and accuracy of fault diagnosis. [ABSTRACT FROM AUTHOR]

The reliability level of general aviation fleet system directly affects the economic benefits and safe operation of general aviation fleet. In order to effectively evaluate the reliability level of general aviation fleet, using the entropy weight variable fuzzy recognition and 1D-CNN depth learning reliability evaluation method. Firstly, taking the Cessna 172 general aviation fleet as the research object, refers to the maintenance statistical analysis of general aviation fleet reliability data, and classifies the fleet reliability evaluation indexes according to the ATA100 chapter standard. Combined with index importance analysis and Delphi expert investigation, 14 key items are extracted as reliability evaluation indexes of general aviation fleet. Secondly, using entropy weight method to obtain indexes weight objectively, and the evaluation level membership function is constructed based on variable fuzzy recognition method. Finally, a reliability evaluation model based on 1D-CNN deep learning method was established. Through training and testing the reliability data evaluation model of general aviation fleet, and comparing with the results of evaluation methods such as support vector machines. The results show that the recognition rate of the 1D-CNN deep learning method based on entropy weight variable fuzzy recognition can reach 91.95%, verifying the objective effectiveness of the evaluation method. [ABSTRACT FROM AUTHOR]

Intelligent Transportation Systems have become integral to daily life, with VANETs (vehicular ad-hoc networks) playing the pivotal role. VANETs, the subsets of MANETs, employ vehicles as nodes to establish intelligent transport systems. However, due to critical applications such as military use, these networks are susceptible to attacks. With features like high mobility, dynamic network topology, and coverage issues, security breaches are a concern. This necessitates a secure routing algorithm to mitigate attacks and ensure message delivery. In our study, we utilize the UNSW-NB15 intrusion detection dataset to develop training and testing models. Our proposed novel intrusion detection system employs a feature selection algorithm that prioritizes significant arriving traffic attributes. This algorithm enhances abnormal activity detection while minimizing associated features. To achieve this, we modify the Conditional Random Field algorithm with fuzzy-based rules, resulting in a more efficient selection of influential and contributing features for detecting attacks such as DoS, Worms, Fuzzers, and Shellcode. Through appropriate feature selection using the modified Conditional Random Field and Support Vector Machine classification system in our experiments, we demonstrate a notable increase in security by reducing the false positive rate. Additionally, our approach excels in detecting accuracy of Fuzzers (98.86%), DoS (98.80%), Worms (34.45%), and Shellcode (89.308%), ultimately enhancing network performance. These findings underscore the effectiveness of our proposed method in enhancing intrusion detection and overall network efficiency. [ABSTRACT FROM AUTHOR]

The performance of Adaboost is highly sensitive to noisy and outlier samples. This is therefore the weights of these samples are exponentially increased in successive rounds. In this paper, three novel schemes are proposed to hunt the corrupted samples and eliminate them through the training process. The methods are: I) a hybrid method based on K-means clustering and K-nearest neighbor, II) a two-layer Adaboost, and III) soft margin support vector machines. All of these solutions are compared to the standard Adaboost on thirteen Gunnar Raetsch's datasets under three levels of class-label noise. To test the proposed method on a real application, electroencephalography (EEG) signals of 20 schizophrenic patients and 20 age-matched control subjects, are recorded via 20 channels in the idle state. Several features including autoregressive coefficients, band power and fractal dimension are extracted from EEG signals of all participants. Sequential feature subset selection technique is adopted to select the discriminative EEG features. Experimental results imply that exploiting the proposed hunting techniques enhance the Adaboost performance as well as alleviating its robustness against unconfident and noisy samples over Raetsch benchmark and EEG features of the two groups. [ABSTRACT FROM AUTHOR]

Rainfall forecasting is essential because heavy and irregular rainfall creates many impacts like destruction of crops and farms. Here, the occurrence of rainfall is highly related to atmospheric parameters. Thus, a better forecasting model is essential for an early warning that can minimize risks and manage the agricultural farms in a better way. In this manuscript, Deep Neural Network (DNN) optimized with Flamingo Search Optimization Algorithm (FSOA) is proposed for Long-term and Short-term Rainfall forecasting. Here, the rainfall data is obtained from the standard dataset as Sudheerachary India Rainfall Analysis (IRA). Moreover, the Morphological filtering and Extended Empirical wavelet transformation (MFEEWT) approach is utilized for pre-processing process. Also, the deep neural network is utilized for performing rainfall prediction and classification. Additionally, the parameters of the DNN model is optimizing by Flamingo Search Optimization Algorithm. Finally, the proposed MFEEWT-DNN- FSOA approach has effectively predict the rainfall in different locations around India. The proposed model is implemented in Python tool and the performance metrics are calculated. The proposed MFEEWT-DNN- FSOA approach has achieved 25%, 26%, 25.5% high accuracy and 35.8%, 24.7%, 15.9% lower error rate for forecasting rainfall in Cannur at Kerala than the existing Map-Reduce based Exponential Smoothing Technology for rainfall prediction (MR-EST-RP), modular artificial neural networks with support vector regression for rainfall prediction (MANN-SVR-RP), and biogeography-based extreme learning machine (BBO-ELM) (BBO-ELM-RP) methods respectively. [ABSTRACT FROM AUTHOR]

The prediction of power demand for unmanned aerial vehicles (UAV) is an essential basis to ensure the rational distribution of the energy system and stable economic flight. In order to accurately predict the demand power of oil-electric hybrid UAV, a method based on variational mode decomposition (VMD) and Sparrow Search Algorithm (SSA) is proposed to optimize the hybrid prediction model composed of long-short term memory (LSTM) and Least Squares Support Vector Machine (LSSVM). Firstly, perform VMD decomposition on the raw demand power data and use the sample entropy method to classify the feature-distinct mode components into high-frequency and low-frequency categories. Then, each modality component was separately input into the mixed model for rolling prediction. The LSSVM model and LSTM model were used to process low-frequency and high-frequency components, respectively. Finally, the predicted values for each modal component are linearly combined to obtain the final predicted value for power demand. Compared with the current models, the prediction model constructed in this paper stands out for its superior ability to track the changing trends of power demand and achieve the highest level of prediction accuracy. [ABSTRACT FROM AUTHOR]

Globally, heart disease is the primary cause of death. Early detection of this disease enables cardiologists to make more accurate judgments regarding the health of their patients. Due to machine learning's ability to identify patterns in data, its use in the medical industry has increased. Many heart disease prediction models have been developed by various researchers utilizing machine learning techniques (MLTs). The performance of MLTs on heart disease prediction may vary for different accuracy measures. Thus, the choice of the appropriate machine-learning technique for heart disease prediction is a challenging task. This paper proposes a multi-criteria decision-making (MCDM)-based method to evaluate the MLTs for heart disease prediction considering various performance measures taken into account altogether. The proposed approach uses the concept of a combined compromise solution (CoCoSo)- an MCDM method. For validation of the proposed approach, an experimental study was conducted to evaluate the performance of fifteen machine learning techniques for predicting heart disease over three heart disease datasets considering six performance measures taken into account altogether. Results show that the logistic regression and support vector machine are recommended as the most suitable MLTs for heart disease prediction modeling with respect to six performance measures considered simultaneously. [ABSTRACT FROM AUTHOR]

BACKGROUND: Recent studies implicate the effect of vestibular loss on cognitive decline, including hippocampal volume loss. As hippocampal atrophy is an important biomarker of Alzheimer's disease, exploring vestibular dysfunction as a risk factor for dementia and its role in hippocampal atrophy is of interest. OBJECTIVE: To replicate previous literature on whole-brain and hippocampal volume in semicircular canal dysfunction (bilateral vestibulopathy; BV) and explore the association between otolith function and hippocampal volume. METHODS: Hippocampal and whole-brain MRI volumes were compared in adults aged between 55 and 83 years. Participants with BV (n = 16) were compared to controls individually matched on age, sex, and hearing status (n = 16). Otolith influence on hippocampal volume in preserved semicircular canal function was evaluated (n = 34). RESULTS: Whole-brain and targeted hippocampal approaches using volumetric and surface-based measures yielded no significant differences when comparing BV to controls. Binary support vector machines were unable to classify inner ear health status above chance level. Otolith parameters were not associated with hippocampal volume in preserved semicircular canal function. CONCLUSIONS: No significant differences in whole-brain or hippocampal volume were found when comparing BV participants with healthy controls. Saccular parameters in subjects with preserved semicircular canal function were not associated with hippocampal volume changes. [ABSTRACT FROM AUTHOR]

Swarm intelligence optimization algorithm has been proved to perform well in the field of parameter optimization. In order to further improve the performance of intelligent optimization algorithm, this paper proposes an improved and adaptive tunicate swarm algorithm (IMATSA) based on tunicate swarm algorithm (TSA). IMATSA improves TSA in the following four aspects: population diversity, local search convergence speed, jumping out of local optimal position, and balancing global and local search. Firstly, IMATSA adopts Tent map and quadratic interpolation to initialize population and enhance the diversity. Secondly, IMATSA uses Golden-Sine algorithm to accelerate the convergence of local search. Thirdly, in the process of global development, IMATSA adopts Levy flight and the improved Gauss disturbance method to adaptively improves and coordinates the ability of global development and local search. Then, this paper verifies the performance of IMATSA based on 14 benchmark functions experiment, ablation experiment, parameter optimization experiments of Support Vector Machine (SVM) and Gradient Boosting Decision Tree (GBDT), Wilcoxon signed rank test and image multi-threshold segmentation experiment with the performance metrics are convergence speed, convergence value, significance level P-value, Peak Signal-to-Noise Ratio (PSNR) and Standard Deviation (STD). Experimental results show that IMATSA performs better in three kinds of benchmark functions; each component of IMATSA has a positive effect on the performance; IMATSA performs better in parameter optimization experiments of SVM experiment and GBDT; there is significant difference between IMATSA and other algorithms by Wilcoxon signed rank test; in image segmentation, the performance is directly proportional to the number of thresholds, and compared with other algorithms, IMATSA has better comprehensive performance. [ABSTRACT FROM AUTHOR]

At present, the local appearance-based texture descriptors in Facial Expression Recognition have limited accuracy due to the inability to encode the discriminative edges. The major cause is the presence of distorted and weak edges due to noise. Hence, this paper proposes new Expression Descriptor called as Weighted Edge Local Directional Pattern (WELDP) which can discriminate the weak and strong edges. Unlike the conventional local descriptors, WELDP searches for the support of neighbor pixels in the determination of Facial expression attributes such as Edges, Corners, Lines, and Curved Edges. WELDP encodes only Strong edge responses and discards weaker edge responses after extracting them through edge detection masks. This work adapted two masks for edge detection: they are Robinson Compass Mask and Kirsch Compass Mask. Moreover, the WELDP aims at code redundancy and encode each pixel only with seven bits (one sign bit and six directional bits). Then the WELDP image is described by a histogram and then processed through SVM (Support Vector Machine) for expression identification. From the simulation experiments, the proposed WELDP is found as better than several existing methods. [ABSTRACT FROM AUTHOR]

Majority classes are easily to be found in imbalance datasets, instead, minority classes are hard to be paid attention to due to the number of is rare. However, most existing classifiers are better at exploring majority classes, resulting in that classification results are unfair. To address this issue of binary classification for imbalance data, this paper proposes a novel fuzzy support vector machine. The thought is that we trained two support vector machines to learn the majority class and the minority class, respectively. Then, the proposed fuzzy is used to estimate the assistance provided by instance points for the training of the support vector machines. Finally, it can be judged for unknown instance points through evaluating that they provided the assistance to the training of the support vector machines. Results on the ten UCI datasets show that the class accuracy of the proposed method is 0.747 when the imbalanced ratio between the classes reaches 87.8. Compare with the competitors, the proposed method wins over them in classification performance. We find that aiming at the classification of imbalanced data, the complexity of data distribution has negative effects on classification results, while fuzzy can resist these negative effects. Moreover, fuzzy can assist those classifiers to gain superior classification boundaries. [ABSTRACT FROM AUTHOR]

With relevant computational software, fuzzy prediction, a new intelligent modelling technique, is utilised to resolve unclear phenomena in various disciplines. Excellent software risk prediction is essential for effective prediction, such as risk management, case planning, and control. We provide an intelligent modelling strategy for software risk prediction in this research. We are applying a support vector machine model and two phases of hybrid fuzzy linear regression clustering (SVM). This method may produce the most accurate risk predictions for various continuous data. The best model with even less error value, acceptable interpretability, and imprecise uncertainty inputs is a fuzzy linear regression with symmetric parameter clustering with a support vector machine (FLRWSPCSVM), a new intelligent modelling technique. The model's predictive accuracy is demonstrably higher than other prediction models, according to validation utilising simulation data and four software packages such as SPSS, MATLAB and Weka Explorer. [ABSTRACT FROM AUTHOR]

Aiming at anomaly detection upon a high-dimensional space, this paper proposed a novel autoencoder-support vector machine. The key thought is that using the autoencoder extracts the features from high-dimensional data, and then the support vector machine achieves the separation of abnormal features and normal features. To increase the precision of identifying anomalies, Chebyshev's theorem was used to estimate the upper of the number of abnormal features. Meanwhile, the dot product operation was implemented in order to strengthen the learning of the model for class labels. Experiment results show that the detected accuracy of the proposed method is 0.766 when the data dimensionality is 5408, and also wins over competitors in detected performance for the considered cases. We also demonstrate that the strengthened learning of class labels can improve the ability of the model to detect anomalies. In terms of noise resistance and overcoming the curse of dimensionality, the former can carry out more efforts than the latter. [ABSTRACT FROM AUTHOR]

As the size and complexity of projects grows, estimates are increasingly used, especially in the agile community. Software development cannot begin without first conducting thorough planning and estimation. Estimating how much work a project will take is a common first step in the software development life cycle. By employing ensemble techniques, we integrate multiple learning algorithms to build a more accurate predictive model. The core elements of our proposed stacked ensemble strategy include Decision Tree, Principal Components Regression, Random Forest, NeuralNet, GLMNET, XGBoost, Earth, and Support Vector Machine. Moreover, we augment the model's performance by incorporating a blend of these foundational algorithms with other ensemble regression methods. Extensive testing in the suggested research work with a number of Super Learners demonstrates that Regression is the best technique for judging effort. The evaluation of the different estimators involved the use of various metrics, including Mean Absolute Error, Root Mean Squared Error, Mean Squared Error, Percentage of Close Approximations within 25% of the True Values (PRED (25)), R-Squared Coefficients, Precision, Recall, and F1-Score. The proposed method yields more trustworthy predicted performance than either single-model approaches or stacked ensembles. Effort estimation serves as the foundation for the rest of the project management process. [ABSTRACT FROM AUTHOR]

Due to the vast amount of patient health data, automated healthcare systems still struggle to classify and diagnose various ailments. Learning redundant data also reduces categorization accuracy. A Deep Belief Network (DBN) has been used to precisely extract the most important aspects from clinical data by ignoring irrelevant/redundant features. Due of many learning variables, training is complicated. Similarly, the hybrid model has been employed by ensemble Convolutional Neural Network (CNN), Long Short-Term Memory (LSTM) and Support Vector Machine (SVM) to categorize diseases. But, its efficiency depends on the proper choice of kernels and hyper-parameters. Therefore, this paper develops an efficient feature extraction and classification model for healthcare systems. First, several medical data related to the patient's health are collected. Then, an Optimized DBN (ODBN) model is presented for maximizing the accurateness of DBN by optimizing the learning variables depends on the Ant Lion Optimization (ALO) algorithm. With learning ODBN, the most relevant features are extracted with reduced computational complexity. After that, the CNN-LSTM with Unsupervised Fine-tuned Deep Self-Organizing Map (UFDSOM)-based classifier model is designed to categorize the extracted features into categories of illnesses. In this novel classifier, dropout normalization and parameter tuning processes are applied to avoid overfitting and optimize the hyper-parameters, which results in a less training period. In the end, studies utilizing publically accessible datasets show that the ODBN with CNN-LSTM-UFDSOM system outperforms classical models by 98.23%. [ABSTRACT FROM AUTHOR]

The Internet of Things (IoT) integrated Cloud (IoT-Cloud) has gotten much attention in the past decade. This technology's rapid growth makes it even more critical. As a result, it has become critical to protect data from attackers to maintain its integrity, confidentiality, protection, privacy, and the procedures required to handle it. Existing methods for detecting network anomalies are typically based on traditional machine learning (ML) models such as linear regression (LR), support vector machine (SVM), and so on. Although these methods can produce some outstanding results, they have low accuracy and rely heavily on manual traffic feature design, which has become obsolete in the age of big data. To overcome such drawbacks in intrusion detection (ID), this paper proposes a new deep learning (DL) model namely Morlet Wavelet Kernel Function included Long Short-Term Memory (MWKF-LSTM), to recognize the intrusions in the IoT-Cloud environment. Initially, to maintain a user's privacy in the network, the SHA-512 hashing mechanism incorporated a blockchain authentication (SHABA) model is developed that checks the authenticity of every device/user in the network for data uploading in the cloud. After successful authentication, the data is transmitted to the cloud through various gateways. Then the intrusion detection system (IDS) using MWKF-LSTM is implemented to identify the type of intrusions present in the received IoT data. The MWKF-LSTM classifier comes up with the Differential Evaluation based Dragonfly Algorithm (DEDFA) optimal feature selection (FS) model for increasing the performance of the classification. After ID, the non-attacked data is encrypted and stored in the cloud securely utilizing Enhanced Elliptical Curve Cryptography (E2CC) mechanism. Finally, in the data retrieval phase, the user's authentication is again checked to ensure user privacy and prevent the encrypted data in the cloud from intruders. Simulations and statistical analysis are performed, and the outcomes prove the superior performance of the presented approach over existing models. [ABSTRACT FROM AUTHOR]

To solve the problem that the operation state of transformer is difficult to quantify, a method of quantitative evaluation and prediction of transformer operating state is proposed, which combines the information entropy of matter element and Support Vector Machine. In the evaluation, various hydrogen gases in the transformer operation are taken as the evaluation indexes and the three-dimensional cross compound element is constructed. The analytic hierarchy process (AHP) is used to determine the theoretical weight of the evaluation index, and the entropy method is used to determine the objective weight of the evaluation index, and the final weight is the joint weight of the theoretical weight and the objective weight. Transformer Health index is calculated by using complex element correlation entropy. In prediction, the grid search, genetic algorithm (GA) and particle swarm optimization (PSO) are used to optimize the parameters of Support Vector Machine. and the prediction model of Health index is established by SVM. Experiment results show that the Support Vector Machine based on Gauss kernel function and genetic algorithm has a prominent effect on the prediction of health index. [ABSTRACT FROM AUTHOR]

The performance-related pay system in colleges and universities is one of the hot spots in the reform of the wage system in colleges and universities in recent years. It is an important measure to improve the quality of education and teaching in colleges and universities and the construction of talent teams. However, there are many problems in the performance-related pay system of colleges and universities, such as unreasonable evaluation indicators, unfair weight distribution, etc., which makes it difficult to accurately reflect the work performance of teachers and staff in the measurement of performance-related pay. Based on this background and trend, this paper conducted an in-depth discussion on the salary system in China's colleges and universities, and used the support vector regression algorithm to study the performance-based salary management of colleges and universities based on linear programming and mathematical statistics. The research showed that with other conditions remaining unchanged, the proportions of primary, intermediate, deputy and senior high school students who were dissatisfied with the system of performance-based pay in colleges and universities were 82%, 57%, 46%, and 9%, respectively. After applying linear programming and mathematical statistics, the proportions of elementary, intermediate, sub-high and ortho-high became 1%, 2%, 5% and 7% respectively. The decline of the first three was particularly obvious, and the teachers with positive high school also dropped by 2%, indicating that linear programming and mathematical statistics were beneficial to the management of performance wages in colleges and universities. [ABSTRACT FROM AUTHOR]

OBJECTIVE: A representation of the sound recordings that are associated with the movement of the entire cardiac structure is termed the Phonocardiogram (PCG) signal. In diagnosing such diverse diseases of the heart, PCG signals are helpful. Nevertheless, as recording PCG signals are prone to several surrounding noises and other disturbing signals, it is a complex task. Thus, prior to being wielded for advanced processing, the PCG signal needs to be denoised. This work proposes an improved heart sound classification by utilizing two-stage Low pass filtering and Wavelet Threshold (WT) technique with subsequent Feature Extraction (FE) using Wavelet Scatter Transform and further classification utilizing the Cubic Polynomial Support Vector Machine (SVM) technique for CVD. METHOD: A computer-aided diagnosis system for CVD detection centered on PCG signal analysis is offered in this work. Initially, by heavily filtering the signal, the raw PCG signals obtained using the database were pre-processed. Then, to remove redundant information and noise, it is denoised via the WT technique. From the denoised PCG, wavelet time scattering features were extracted. After that, by employing SVMs, these features were classified for pathology. RESULTS: For the analysis, the PCG signal obtained from the Physionet dataset was considered. Heavy low-pass filtering utilizing a Low-Pass Butterworth Filter (LPBF) is entailed in the pre-processing step. This removed 98% of the noise inherently present in the signal. Further, the signal strength was ameliorated by denoising it utilizing the WT technique. Promising results with maximum noise removal of up to 99% are exhibited by the method. From the PCG, Wavelet Scattering (WS) features were extracted, which were later wielded to categorize the PCG utilizing SVMs with 99.72% accuracy for different sounds. DISCUSSION: The Classification accuracies are analogized with other classification techniques present in the literature. This technique exhibited propitious outcomes with a 3% improvement in the F1 score when weighed against the top-notch techniques. The improvement in the metrics is attributed to the usage of the pre-processing stage comprising of Low-pass filter and WT method, WS Transform (WST), and SVMs. CONCLUSION: The superiority of the proposed technique is advocated by the comparative investigation with prevailing methodologies. The system revealed that Coronary Artery Disease (CAD) can be implemented with superior methods to achieve high accuracy. [ABSTRACT FROM AUTHOR]

When building a performing one-class classifier, the low variance direction of the training data set might provide important information. The low variance direction of the training data set improves the Covariance-guided One-Class Support Vector Machine (COSVM), resulting in better accuracy. However, this classifier does not use data dispersion in the one class. It explicitly does not make use of target class subclass information. As a solution, we propose Scatter Covariance-guided One-Class Support Vector Machine, a novel variation of the COSVM classifier (SC-OSVM). In the kernel space, our approach makes use of subclass information to jointly decrease dispersion. Our algorithm technique is even based on a convex optimization problem that can be efficiently solved using standard numerical methods. A comparison of artificial and real-world data sets shows that SC-OSVM provides more efficient and robust solutions than normal COSVM and other contemporary one-class classifiers. [ABSTRACT FROM AUTHOR]

BACKGROUND: Dental panoramic imaging plays a pivotal role in dentistry for diagnosis and treatment planning. However, correctly positioning patients can be challenging for technicians due to the complexity of the imaging equipment and variations in patient anatomy, leading to positioning errors. These errors can compromise image quality and potentially result in misdiagnoses. OBJECTIVE: This research aims to develop and validate a deep learning model capable of accurately and efficiently identifying multiple positioning errors in dental panoramic imaging. METHODS AND MATERIALS: This retrospective study used 552 panoramic images selected from a hospital Picture Archiving and Communication System (PACS). We defined six types of errors (E1-E6) namely, (1) slumped position, (2) chin tipped low, (3) open lip, (4) head turned to one side, (5) head tilted to one side, and (6) tongue against the palate. First, six Convolutional Neural Network (CNN) models were employed to extract image features, which were then fused using transfer learning. Next, a Support Vector Machine (SVM) was applied to create a classifier for multiple positioning errors, using the fused image features. Finally, the classifier performance was evaluated using 3 indices of precision, recall rate, and accuracy. RESULTS: Experimental results show that the fusion of image features with six binary SVM classifiers yielded high accuracy, recall rates, and precision. Specifically, the classifier achieved an accuracy of 0.832 for identifying multiple positioning errors. CONCLUSIONS: This study demonstrates that six SVM classifiers effectively identify multiple positioning errors in dental panoramic imaging. The fusion of extracted image features and the employment of SVM classifiers improve diagnostic precision, suggesting potential enhancements in dental imaging efficiency and diagnostic accuracy. Future research should consider larger datasets and explore real-time clinical application. [ABSTRACT FROM AUTHOR]

The hardness properties of constructional materials should be investigated as important factors in assessing the performance over the operation period. Two tests are performed to determine the stiffness characteristic, including slump and compressive strength (CS). They must be considered to examine efficiency, durability, and resistance to pressure. Due to the structure's susceptibility and usage in dams, bridges, etc., high-performance concrete must have an appropriate set of these tests. There are two soft-based and laboratory methods for performing these tests. The laboratory method is not economical in terms of cost and time, and artificial intelligence (AI) is used to reduce the aforementioned factors. Models and optimizers use software-based methods to help reduce errors and increase model accuracy. So, The main purpose of this research has been introducing novel ways of coupling an ensemble model with optimizers by adjusting some internal parameters. In this article, two models, the Radial Basis Function Neural network and Support Vector Regression were combined and coupled with General Normal Distribution Optimization (GNDO) and Archimedes optimization algorithm (AOA) into the two frameworks of SVRRBF-AOA and SVRRBF-GNDO. As a result, the hybrid model of SVRRBF-AOA could perform well by obtaining R2 and RMSE of 0.9915 and 2.71 for the slump and 0.9845 and 3.34 for CS, respectively. [ABSTRACT FROM AUTHOR]

The classification problem is a key area of research in machine learning. The Least Squares Support Vector Machine (LSSVM) is an important classifier that is commonly used to solve classification problems. Its widespread use stems from its replacement of the inequality constraint in the Support Vector Machine (SVM) with the equality constraint, which transforms the convex quadratic programming (QP) problem of SVM into the solution of linear equations. However, when dealing with multi-class classification problems, LSSVM faces the challenges of lack of sparsity and sample noises, which can negatively impact its performance. Based on the modeling characteristics and data distribution of the multi-class LSSVM model, this paper proposes two improvements and establishes an improved fuzzy sparse multi-class least squares support vector machine (IF-S-M-LSSVM). The first improvement adopts a non-iterative sparse algorithm, which can delete training sample points to different degrees by adjusting the sparse ratio. The second improvement addresses the impact of sample noise on determining the optimal hyperplane by adding a fuzzy membership degree based on sample density. The advantages of the new model, in terms of training speed and classification accuracy, are verified through UCI machine learning standard data set experiments. Finally, the statistical significance of the IF-S-M-LSSVM model is tested using the Friedman and Bonferroni-Dunn tests. [ABSTRACT FROM AUTHOR]

The quality of sleep plays a crucial role in physical well-being, and individuals are becoming increasingly concerned about sleep quality and its associated health issues. Although various sleep monitoring devices exist, there remains a need for a highly accurate sleep state identification algorithm. To address this, we present a paper that utilizes machine learning techniques to identify human sleep states based on electroencephalogram (EEG) signals collected by an EEG instrument. We propose a model that incorporates two nonlinear characteristic parameters, MSE and PSE, extracted from artificially designed EEG signals as input. Additionally, we employ a Support Vector Machine (SVM) classifier algorithm to accurately identify sleep states, eliminating uncertainties associated with manually designed feature parameters. Experimental results demonstrate the superior accuracy of our proposed model for sleep state analysis, offering valuable insights for improving sleep quality and addressing related health concerns. [ABSTRACT FROM AUTHOR]

Power system load forecasting is a method that uses historical load data to predict electricity load data for a future time period. Aiming at the problems of general prediction accuracy and slow prediction speed in using typical machine learning methods, an improved fuzzy support vector regression machine method is proposed for power load forecasting. In this method, the boundary vector extraction technique is employed in the design of the membership function for fuzzy support vectors to differentiate the importance of different samples in the regression process. This method utilizes a membership function based on boundary vectors to assign differential weights to different sample points that used to differentiate the importance of different types of samples in the regression analysis process in order to improve the accuracy of electricity load prediction. The key parameters of the fuzzy support vector regression model are optimized, further enhancing the precision of the forecasting results. Simulation experiments are conducted using real power load data sets, and the experimental results demonstrate the effectiveness of the proposed method in terms of accuracy and speed in predicting power load data compared to other prediction models. This method can be widely applied in real power production and scheduling processes. [ABSTRACT FROM AUTHOR]

There is a widespread use of cluster-based routing in wireless sensor networks since it is the most energy-efficient. Idealizing cluster heads, on the other hand, is NP-hard and hence requires heuristic or metaheuristic approaches. However, while outperforming algorithms, metaheuristics computation time restricts its ability to respond to routing requests as rapidly as algorithms can today. A network's or an application's parameters can't be easily accommodated by routing methods. This paper offers the HMML, a combination model combining hybrid metaheuristics and machine-learning. Our HMML model makes use of an automated tuning metaheuristic (e.g. evolutionary algorithm) to fine-tune the heuristic technique for each specific configuration. For a variety of combinations, this is done. A network simulation is run using the modified heuristic algorithm in each configuration to arrive at a solution. As a result, a comprehensive dataset for a variety of conditions is produced (e.g., support vector machine). These characteristics include local (round-state), global (network-state), and application-specific aspects of the input feature vector. After training, the HMML model may be used to quickly cluster data. Machine learning's capacity to generalize helps us comprehend the metaheuristic algorithm's behavior in identifying optimal paths for previous configurations. Simulation studies show that HMML can adapt to varied applications while extending network life which increases upto 5% for total energy consumption. [ABSTRACT FROM AUTHOR]

Meiotic recombination has a crucial role in the biological process involving double-strand DNA breaks. Recombination hotspots are regions with a size varying from 1 to 2 kb, which is closely related to the double-strand breaks. With the increasement of both sperm data and population data, it has been demonstrated that computational methods can help us to identify the recombination spots with the advantages of time-saving and cost-saving compared to experimental verification approaches. To obtain better identification performance and investigate the potential role of various DNA sequence-derived features in building computational models, we designed a computational model by extracting features including the position-specific trinucleotide propensity (PSTNP) information, the electron-ion interaction potential (EIIP) values, nucleotide composition (NC) and dinucleotide composition (DNC). Finally, the supporting vector machine (SVM) model was trained by using the 172-dimensional features selected by means of the F -score feature ranking mode, and the accuracy of the predictor reached 98.24% in the jackknife test, which elucidates this model is a potential way for identifying recombination spots. [ABSTRACT FROM AUTHOR]

Background: In pursuit of diagnostic tools capable of targeting distinct stages of Alzheimer's disease (AD), this study explores the potential of electroencephalography (EEG) combined with machine learning (ML) algorithms to identify patients with mild or moderate AD (ADM) and advanced AD (ADA). Objective: This study aims to assess the classification accuracy of six classical ML algorithms using a dataset of 668 patients from multiple hospitals. Methods: The dataset comprised measurements obtained from 668 patients, distributed among control, ADM, and ADA groups, collected from five distinct hospitals between 2011 and 2022. For classification purposes, six classical ML algorithms were employed: support vector machine, Bayesian linear discriminant analysis, decision tree, Gaussian Naïve Bayes, K-nearest neighbor and random forest. Results: The RF algorithm exhibited outstanding performance, achieving a remarkable balanced accuracy of 93.55% for ADA classification and 93.25% for ADM classification. The consistent reliability in distinguishing ADA and ADM patients underscores the potential of the EEG-based approach for AD diagnosis. Conclusions: By leveraging a dataset sourced from multiple hospitals and encompassing a substantial patient cohort, coupled with the straightforwardness of the implemented models, it is feasible to attain notably robust results in AD classification. [ABSTRACT FROM AUTHOR]

Multi-source online transfer learning uses the tagged data from multiple source domains to enhance the classification performance of the target domain. For unbalanced data sets, a multi-source online transfer learning algorithm that can oversample in the feature spaces of the source domain and the target domain is proposed. The algorithm consists of two parts: oversampling multiple source domains and oversampling online target domains. In the oversampling phase of the source domain, oversampling is performed in the feature space of the support vector machine (SVM) to generate minority samples. New samples are obtained by amplifying the original Gram matrix through neighborhood information in the source domain feature space. In the oversampling phase of the online target domain, minority samples from the current batch search for k-nearest neighbors in the feature space from multiple batches that have already arrived, and use the generated new samples and the original samples in the current batch to train the target domain function together. The samples from the source domain and the target domain are mapped to the same feature space through the kernel function for oversampling, and the corresponding decision function is trained using the data from the source domain and the target domain with relatively balanced class distribution, so as to improve the overall performance of the algorithm. Comprehensive experiments were conducted on four real datasets, and compared to other baseline algorithms on the Office Home dataset, the accuracy improved by 0.0311 and the G-mean value improved by 0.0702. [ABSTRACT FROM AUTHOR]

This paper presents forecasting and trend analysis of foreign currency exchange rate in financial market using a hybrid Deep Analytic Network (DAN) technique optimized by a modified water cycle algorithm called Weighted WCA (WWCA) with better generalization capability than the traditional WCA.DAN comprises several stacked KRR (Kernel Ridge Regression) Auto encoders in a multilayer nonlinear regression architecture approach that provides better generalization and accuracy using regularized least squares technique. Further DAN using wavelet kernel function is particularly attractive for its strong data fitting and generalization ability along with its simplified execution procedure, high speed, and better performance achievements in comparison to LSSVM (least squares support vector machine). The output from the DAN is fed to a weighted KRR module to reject noise or the outliers in the noisy data and to make DAN a more robust predictor of the Forex markets, To obtain optimal values of wavelet kernel parameters, a modified metaheuristic water cycle algorithm i.e. the proposed WWCA is utilized. Applications of this new approach to predict forex rate along with trend analysis on three stock markets provide successful results and validate its superiority over some well known approaches like ANN, SVM, Naïve-Bayes, ELM. [ABSTRACT FROM AUTHOR]

Finding the head of a traveling wave is challenging because an overhead line-cable hybrid transmission line's wave impedance is not constant. Because of this, it is difficult to measure the hybrid transmission line precisely. This leads to the proposal of a hybrid transmission line fault location algorithm, which combines VMD energy entropy for training support vector machines and traveling wave law graphs. The VMD energy entropy is first used to train SVM to identify the faulty section. The method of traveling waves with a single end is utilized to precisely fix the fault distance within the faulty segment when the type of traveling wave has been identified. The simulation results demonstrate that the method provides precise measurements and is effective for hybrid transmission lines with a range of fault distances and grounding resistances. [ABSTRACT FROM AUTHOR]

Background: To date, the reliable detection of mild cognitive impairment (MCI) remains a significant challenge for clinicians. Very few studies investigated the sensitivity of acoustic features in detecting Mandarin-speaking elders at risk for MCI, defined as "putative MCI" (pMCI). Objective: This study sought to investigate the possibility of using automatically extracted speech acoustic features to detect elderly people with pMCI and reveal the potential acoustic markers of cognitive decline at an early stage. Methods: Forty-one older adults with pMCI and 41 healthy elderly controls completed four reading tasks (syllable utterance, tongue twister, diadochokinesis, and short sentence reading), from which acoustic features were extracted automatically to train machine learning classifiers. Correlation analysis was employed to evaluate the relationship between classifier predictions and participants' cognitive ability measured by Mini-Mental State Examination 2. Results: Classification results revealed that some temporal features (e.g., speech rate, utterance duration, and the number of silent pauses), spectral features (e.g., variability of F1 and F2), and energy features (e.g., SD of peak intensity and SD of intensity range) were effective predictors of pMCI. The best classification result was achieved in the Random Forest classifier (accuracy = 0.81, AUC = 0.81). Correlation analysis uncovered a strong negative correlation between participants' cognitive test scores and the probability estimates of pMCI in the Random Forest classifier, and a modest negative correlation in the Support Vector Machine classifier. Conclusions: The automatic acoustic analysis of speech could provide a promising non-invasive way to assess and monitor the early cognitive decline in Mandarin-speaking elders. [ABSTRACT FROM AUTHOR]

Background: Alzheimer's disease (AD) is a progressive neurodegenerative disease that results in cognitive decline, dementia, and eventually death. Diagnosing early signs of AD can help clinicians to improve the quality of life. Objective: We developed a non-invasive approach to help neurologists and clinicians to distinguish probable AD patients and healthy controls (HC). Methods: The patients' gaze points were followed based on the words they used to describe the Cookie Theft (CT) picture description task. We hypothesized that the timing of words enunciation aligns with the participant's eye movements. The moments that each word was spoken were then aligned with specific regions of the image. We then applied machine learning algorithms to classify probable AD and HC. We randomly selected 60 participants (30 AD and 30 HC) from the Dementia Bank (Pitt Corpus). Results: Five main classifiers were applied to different features extracted from the recorded audio and participants' transcripts (AD and HC). Support vector machine and logistic regression had the highest accuracy (up to 80% and 78.33%, respectively) in three different experiments. Conclusions: In conclusion, point-of-gaze can be applied as a non-invasive and less expensive approach compared to other available methods (e.g., eye tracker devices) for early-stage AD diagnosis. [ABSTRACT FROM AUTHOR]

Disease diagnosis is very important in the medical field. It is essential to diagnose chronic diseases such as diabetes, heart disease, cancer, and kidney diseases in the early stage. In recent times, ensembled-based approaches giving effective predictive performance than individual classifiers and gained attention in assisting doctors with early diagnosis. But one of the challenges in these approaches is dealing with class-imbalanced data and improper configuration of ensemble classifiers with optimized parameters. In this paper, a novel 3-level stacking approach with ADASYN oversampling technique with PSO Optimized SVM meta-model (Stacked-ADASYN-PSO) is proposed. Our proposed Stacked-ADASYN-PSO model uses base models such as Logistic regression(LR), K-Nearest neighbor (KNN), Support Vector Machine (SVM), Decision Tree (DT), and Multi-Layer Perceptron (MLP) in layer-0. In layer-1 three meta classifiers namely LR, KNN, and Bagging DT are used. In layer-2 PSO optimized SVM used as the final meta-model to combine the previous layer predictions. To evaluate the robustness of the proposed model It is tested on five benchmark disease datasets from the UCI machine learning repository. These results are compared with state-of-the-art ensemble models and non-ensemble models. Results demonstrated that the proposed model performance is superior in terms of AUC, accuracy, specificity, and precision. We have performed statistical analysis using paired T-tests with a 95% confidence level and our proposed stacking model is significantly differs when compared to base classifiers. [ABSTRACT FROM AUTHOR]

Cancer is a devastating disease that has far-reaching effects on our culture and economy, in addition to the human lives it takes. Regarding budgetary responsibility, investing just in cancer treatment is not an option. Early diagnosis is a crucial part of the remedy that sometimes gets overlooked. Malignancy is often diagnosed and evaluated using Histopathology Images (HI), which are widely accepted as the gold standard in the field. Yet, even for experienced pathologists, analysing such images is challenging, which raises concerns of inter- and intra-observer variability. The analysis also requires a substantial investment of time and energy. One way that such an examination may be sped up is by making use of computer-assisted diagnostics devices. The purpose of this research is to create a comprehensive cancer detection system using images of breast and prostate histopathology stained with haematoxylin and eosin (H&E). Proposed here is work on improving colour normalisation methods, constructing an integrated model for nuclei segmentation and multiple objects overlap resolution, introducing and evaluating multi-level features for extracting relevant histopathological image and interpretable information, and developing classification algorithms for tasks such as cancer diagnosis, tumor identification, and tumor class labelling. Mini-Batch Stochastic Gradient Descent and Convolutional Neural Network which obtained statistical kappa value for breast cancer histopathology images shows a high degree of consistency in the classification task, with a range of 0.610.80 for benign and low grades and a range of 0.811.0 for medium and high rates. The Support Vector Machine (SVM), on the other hand, shows an almost perfect degree of consistency (0.811.0) across the several breast cancer picture classifications (benign, low, medium, and high). [ABSTRACT FROM AUTHOR]