Search

In high-speed analog-to-digital converters (ADCs), two main factors contribute to high power consumption. The first is the super linear relationship with the sampling rate; i.e., by doubling the sampling rate, the power consumption more than doubles. The second factor arises from the consumption of analog circuitry responsible to mitigate the jitter noise. By employing a multichannel sampling system, one can achieve high sampling rates by incorporating multiple low sampling-rate channels, which results in a linear scaling of power consumption with the number of channels. The main drawback of this system is the timing mismatch between the sampling channels. In this paper, we intend to jointly compensate the jitter noise and the timing mismatch between the channels using statistical methods. We first approximate the acquisition system and derive a stochastic model. Then, we propose an iterative maximum likelihood algorithm to estimate the parameters of the input signal. We further evaluate the Cramér-Rao lower bound (CRLB) for the estimation error to examine the proposed algorithm. Simulation results indicate that our algorithm is capable of closely following the CRLB curve for reasonable values of jitter noise and a wide range of timing mismatch errors. Moreover, it is shown that the mismatch-compensated multichannel sampling system performs almost equivalently to a single-channel high rate sampler without having its shortcomings. [ABSTRACT FROM AUTHOR]

Sensor-based online process monitoring has extensive applications, such as in manufacturing and service industries. In real environments, though, sensor data are often contaminated with noise, leading to severe challenges in accurate data analysis. In the existing literature, noise is generally modeled as Gaussian to analyze sensor data for various applications, for example in fault detection and diagnostics. However, in some applications, such as due to challenging field conditions, sensor data may be disturbed by high levels of outliers such that the Gaussian assumption of sensor noise is inadequate, thus leading to large estimation errors. This paper focuses on online classification applications. A robust sparse representation classification method is proposed, which considers non-Gaussian noise, and thus can effectively analyze sensor data with higher levels of outliers. Case studies were completed, based on both numerically simulated sensor data and actual wearable sensor data from occupational manual material handling process monitoring. The proposed classification method could effectively analyze sensor data with non-Gaussian noise, and outperformed commonly used methods in the literature. Thus, this new method may be advantageous for solving classification problems in challenging field conditions, to address the difficulties of high levels of sensor outliers. [ABSTRACT FROM AUTHOR]

Principal component analysis (PCA) aims at estimating the direction of maximal variability of a high-dimensional data set. A natural question is: does this task become easier, and estimation more accurate, when we exploit additional knowledge on the principal vector? We study the case in which the principal vector is known to lie in the positive orthant. Similar constraints arise in a number of applications, ranging from the analysis of gene expression data to spike sorting in neural signal processing. In the unconstrained case, the estimation performances of PCA have been precisely characterized using the random matrix theory, under a statistical model known as the spiked model. It is known that the estimation error undergoes a phase transition as the signal-to-noise ratio crosses a certain threshold. Unfortunately, tools from the random matrix theory have no bearing on the constrained problem. Despite this challenge, we develop an analogous characterization in the constrained case, within a one-spike model. In particular: 1) we prove that the estimation error undergoes a similar phase transition, albeit at a different thresholds in signal-to-noise ratio that we determine exactly; 2) we prove that—unlike in the unconstrained case—the estimation error depends on the spike vector, and characterize the least favorable vectors; and 3) we show that a non-negative principal component can be approximately computed—under the spiked model—in nearly linear time. This despite the fact that the problem is non-convex and, in general, NP-hard to solve exactly. [ABSTRACT FROM AUTHOR]

This paper deals with area-based subpixel image registration under the rotation-isometric scaling-translation transformation hypothesis. Our approach is based on parametrical modeling of geometrically transformed textural image fragments and maximum-likelihood estimation of the transformation vector between them. Due to the parametrical approach based on the fractional Brownian motion modeling of the local fragments' texture, the proposed estimator \mboxML_\mathrmfBm (ML stands for “maximum likelihood” and fBm stands for “fractal Brownian motion”) has the ability to better adapt to real image texture content compared with other methods relying on universal similarity measures such as mutual information or normalized correlation. The main benefits are observed when assumptions underlying the fBm model are fully satisfied, e.g., for isotropic normally distributed textures with stationary increments. Experiments on both simulated and real images and for high and weak correlations between registered images show that the \mboxML_\mathrmfBm estimator offers significant improvement compared with other state-of-the-art methods. It reduces translation vector, rotation angle, and scaling factor estimation errors by a factor of about 1.75–2, and it decreases the probability of false match by up to five times. In addition, an accurate confidence interval for \mboxML_\mathrmfBm estimates can be obtained from the Cramér–Rao lower bound on rotation-scaling-translation parameter estimation error. This bound depends on texture roughness, noise level in reference and template images, correlation between these images, and geometrical transformation parameters. [ABSTRACT FROM AUTHOR]

We show that the rate regions achieved by linear-feedback coding schemes over dual multi-antenna Gaussian multi-access channels (MACs) and broadcast channels (BCs) with independent noises coincide. By dual here we mean: •

the channel matrices of the MAC and the BC are transposes of each other and [ABSTRACT FROM PUBLISHER]

This letter presents a novel time-of-arrival (TOA) blind estimation technique for ultra wideband energy detection receivers with reduced complexity. The proposed method is blind in the sense that it does not exploit any information about channel or noise power. This new approach is based on a set of approximations of the exact likelihood function (ELF) of the observed energy. Even though these approximations achieve an important reduction of complexity, the shape of the new approximated function is accurate enough compared to the ELF. Application of a threshold to the differential of the approximated log-likelihood function completes the procedure. Simulations show that the performance of the proposed method in terms of the cumulative distribution function of the estimation error approaches that of a method based on the ELF and a genie-aided algorithm with perfect knowledge of the optimal threshold. [ABSTRACT FROM PUBLISHER]

This paper considers the problem of resource-constrained and noise-limited localization and estimation of dynamic targets that are sparsely distributed over a large area. We generalize an existing framework [Bashan , 2008] for adaptive allocation of sensing resources to the dynamic case, accounting for time-varying target behavior such as transitions to neighboring cells and varying amplitudes over a potentially long time horizon. The proposed adaptive sensing policy is driven by minimization of a surrogate function for mean squared error within locations containing targets. We provide theoretical upper bounds on the performance of adaptive sensing policies by analyzing solutions with oracle knowledge of target locations, gaining insight into the effect of target motion and amplitude variation as well as sparsity. Exact minimization of the multistage objective function is infeasible, but myopic optimization yields a closed-form solution. We propose a simple non-myopic extension, the Dynamic Adaptive Resource Allocation Policy (D-ARAP), that allocates a fraction of resources for exploring all locations rather than solely exploiting the current belief state. Our numerical studies indicate that D-ARAP has the following advantages: (a) it is more robust than the myopic policy to noise, missing data, and model mismatch; (b) it performs comparably to well-known approximate dynamic programming solutions but at significantly lower computational complexity; and (c) it improves greatly upon nonadaptive uniform resource allocation in terms of estimation error and probability of detection. [ABSTRACT FROM PUBLISHER]

This paper establishes a nearly optimal algorithm for denoising a mixture of sinusoids from noisy equispaced samples. We derive our algorithm by viewing line spectral estimation as a sparse recovery problem with a continuous, infinite dictionary. We show how to compute the estimator via semidefinite programming and provide guarantees on its mean-squared error rate. We derive a complementary minimax lower bound on this estimation rate, demonstrating that our approach nearly achieves the best possible estimation error. Furthermore, we establish bounds on how well our estimator localizes the frequencies in the signal, showing that the localization error tends to zero as the number of samples grows. We verify our theoretical results in an array of numerical experiments, demonstrating that the semidefinite programming approach outperforms three classical spectral estimation techniques. [ABSTRACT FROM PUBLISHER]

Minimum-variance filters and smoothers exhibit performance degradations when they are designed with inexact models and noise statistics. Filter and smoother estimation errors are assumed herein to be generated by a first-order moving-average system. This assumed system is identified and used to design a frequency weighting function to improve mean square error performance. It is shown under prescribed conditions that the sequence of frequency-weighted estimation error variances are nonincreasing. An example is presented which demonstrates the efficacy of repeated frequency weighting iterations. [ABSTRACT FROM AUTHOR]

This paper focuses on analytical studies of the primary user (PU) traffic classification problem. colorblackObserving that the gamma distribution can represent positively skewed data and exponential distribution (popular in communication networks performance analysis literature) it is considered here as the PU traffic descriptor. We investigate two PU traffic classifiers utilizing perfectly measured PU activity (busy) and inactivity (idle) periods: (i) maximum likelihood classifier (MLC) and (ii) multi-hypothesis sequential probability ratio test classifier (MSPRTC). Then, relaxing the assumption on perfect period measurement, we consider a PU traffic observation through channel sampling. For a special case of negligible probability of PU state change in between two samplings, we propose a minimum variance PU busy/idle period length estimator. Later, relaxing the assumption of the complete knowledge of the parameters of the PU period length distribution, we propose two PU traffic classification schemes: (i) estimate-then-classify (ETC), and (ii) average likelihood function (ALF) classifiers considering time domain fluctuation of the PU traffic parameters. Numerical results show that both MLC and MSPRTC are sensitive to the periods measurement errors when the distance among distribution hypotheses is small, and to the distribution parameter estimation errors when the distance among hypotheses is large. For PU traffic parameters with a partial prior knowledge of the distribution, the ETC outperforms ALF when the distance among hypotheses is small, while the opposite holds when the distance is large. [ABSTRACT FROM AUTHOR]