Search

This communication presents the design of a wideband circularly polarized (CP) antenna array based on sequential rotation (SR) technique that is excited by a substrate integrated coaxial line (SICL) with mature and stable processing technology for millimeter-wave (mm-wave) applications. Initially, the influence of the amplitude and phase errors of the feeding network on the axial ratio of the CP array is analyzed, and the detailed design scheme of the wideband CP array based on SR technology is summarized, which can be used to design SR CP array with wide bandwidth and high polarization purity. Then, an SICL-fed $4 \times 4$ CP array working in the mm-wave band that is composed of two substrate layers and a bonding film layer is designed. The radiation element is processed with a larger chamfering, which can realize elliptically polarized radiation in a broadband range, and the impedance bandwidth is significantly expanded relative to the working state of linearly polarized and CP, which has a significant impact on the final array working bandwidth enhancement. The feeding network and radiation elements are directly connected in the same plane. Finally, the proposed antenna is processed and measured to verify the theory and design scheme in this communication. Over the frequency range of 25.0–34.0 GHz, the measured 1.5 dB axial ratio bandwidth of the fabricated prototype is 30.5%, and the return losses are less than −10 dB. The maximum measured peak gain is 16.5 dBi. [ABSTRACT FROM AUTHOR]

This communication presents a dual-polarized series-fed array antenna with 30° beam-pointing for millimeter-wave (MM-Wave) applications. The 45° and −45° polarized subarrays share the aperture in an interdigital shape. The spacing between subarrays with the same polarization orientation is set to $0.56\lambda _{0}$ through the use of narrower T-type folded substrate integrated waveguide (TFSIW) instead of substrate integrated waveguide (SIW). The substrate integrated coaxial line (SICL) is adopted to design the array feeding network. To validate the proposed design, a $4 \times 6$ (single polarization) dual-polarized array antenna operating at 28 GHz with 30° beam-pointing is fabricated. Based on the measurement, the return losses are lower than −10 dB from 27.5 to 28.5 GHz, the isolations between the two polarization ports are higher than 30.0 dB in the frequencies mentioned above, the maximum gain at the center frequency is 15.7 dBi, and the cross-polarization levels are lower than −18.5 dB. The proposed antenna only needs one-step processing with the standard PCB technology without additional stitching assembly. Simulated and measured results of the proposed antennas were compared. [ABSTRACT FROM AUTHOR]