Search

The L-band radiometer onboard the soil moisture active passive (SMAP) mission is used to retrieve sea surface salinity (SSS) over global ocean. In the Arctic seas, one of the major challenges of SSS remote sensing is the presence of sea ice. This paper proposes a data-driven ice correction (IC) algorithm which extracts emission from the water portion of measured brightness temperature (TB) in scenes mixed with water and ice. Emission of the ice portion was removed based on estimation according to the ice fraction (fice) in the satellite footprint and ice signature derived from surrounding pixels. The IC algorithm is applied to SMAP TB data to obtain TB with IC (TBIC), which are used for SSS retrieval using the standard JPL SMAP CAP processing system. We show that the algorithm is most effective near the ice edge, thereby increasing the fice threshold for possible SSS retrieval to 15% from the current 3% without IC. SMAP SSS are validated using in situ salinity collected during NASA's Ocean Melting Greenland (OMG) mission from 2016 to 2020 along the Greenland coast. The number of collocations between OMG and SMAP daily gridded salinity increased by more than 30% with IC. The statistical analysis shows a similar retrieval accuracy with or without IC, with the standard deviation of the difference between OMG and SMAP of 1.41 psu (with IC) and 1.42 psu (without IC). The bias-adjusted SMAP SSS depicts salinity patterns and gradients around Greenland consistent with OMG measurements.

Land surface temperature (LST) is a key parameter and plays an important role in hydrology, ecology, environment, and biogeochemistry. It is difficult for the existing satellites to acquire global LST with spatial and temporal consistency. The Moon-based Earth observation platform with a long life, large coverage can observe continuously the Earth, and obtain the global-scale LST. At present, various approaches for retrieving LST from passive microwave remote sensing data have been developed for the satellite remote sensing data with small and constant viewing zenith angle, however, the Moon-based Earth observation platform located outside the Earth's ionosphere has the viewing zenith angle of 0-90°. In this study, a modified physical-based method of LST retrieval from passive microwave data was developed for wide viewing zenith angles, and the LST and emissivity can be simultaneously estimated through the analysis of various atmospheric and ionosphere parameters. Three types of data, including the FengYun-3B satellite microwave radiation imager data, the multichannel Advanced Microwave Scanning Radiometer data, and Moon-based microwave radiation simulation data with the viewing zenith angles of 52-53°, 55°, and 0-90°, respectively, were used to retrieve LST. Results show that the estimation accuracy of LST decreases with the increase of viewing zenith angle. The 23.8 and 36.5 GHz brightness temperature is optimum for the LST estimation under a large-scale viewing zenith angle, and the root mean square errors of the LST are 5.18, 5.44, and 4.79 K, respectively.

Brightness temperature data from wave Imaging Radiometer using Aperture Synthesis (MIRAS) on board the European Space Agency's (ESA) Soil Moisture and Ocean Salinity (SMOS) mission have been used to derive the thickness of thin sea ice for the Arctic freeze-up period. To control the long-term geophysical quality for level 3 SMOS sea ice thickness products we derive a regional extent parameter that can be compared to independent standard ice extent products such as the NSIDC sea ice index. This metric allows to identify first-order quality problems such as data gaps and to observe the evolution of the Arctic sea ice growth in key regions. The regionalized SMOS sea ice thickness extent corresponds in general well with the corresponding NSIDC Sea Ice Index. The occurrence of severe RFI problems has so far mainly been limited to the initial period of the SMOS measurements during the season 2010/2011. Otherwise the comparison does not reveal any significant quality problems of the SMOS sea ice thickness data.

The NASA SMAP (Soil Moisture Active Passive) mission provides a global coverage of soil moisture measurements based on its L-band microwave radiometer every 2-3 days at about 40 km resolution. The soil moisture retrieval algorithms model the brightness temperature as a function of soil moisture, surface conditions and vegetation. External data sources inform the algorithms about the surface conditions and vegetation, which enable the retrieval of soil moisture. The inversion process contains uncertainties related to radiometer measurements, forward model assumptions and ancillary data sources. This study focuses on the uncertainties that depend on the seasonal evolution of the surface conditions and vegetation. The study compares the SMAP and core validation site (CVS) soil moisture values over a period of four years to extract the evolution of performance metrics over time. The analysis showed that most CVS that include managed agriculture exhibit significant time-dependent seasonal bias. This bias was linked to seasonal temperature cycle, which is a proxy to several features that can cause seasonally dependent errors in the SMAP product.

Surface orientation information is essential to depicting the 3-D structure of an object. This paper analyzes the linear polarization characteristics of several typical objects by simulations and measurements. Then, a polarization-based method is presented to acquire the object surface orientation information from three different linear polarization brightness temperature images by using a 94-GHz imaging radiometer. The experiments are conducted outside, where a wooden plate is placed obliquely on a metal box. Experimental results indicate that our method is capable of achieving the surface orientation information that is beneficial to recognizing the object. This method suggests possible applications for terrain models and object detections.

The Soil Moisture Active/Passive satellite microwave radiometer has been providing measurements of L-band thermal emission from Earth for more than 2 years. SMAP retrieves surface soil moisture from its brightness temperature measurements, and continues to provide science products to the user community. Even though the SMAP radiometer operates in a protected band, its measurements are still corrupted by Radio Frequency Interference (RFI) caused by illegal in-band transmissions or out-of-band emissions. The SMAP radiometer was designed to include special hardware to enable RFI detection and filtering using multiple detection algorithms. Given the good overall performance of SMAP algorithms to detect RFI sources, an automatic tool to report source properties automatically was developed and is now operational. This paper provides a preliminary analysis of the outputs of this reporting tool with a particular focus on the evolution of the RFI environment observed by SMAP during its period of operations.

Aquarius final product V5.0 has been released. The dataset includes close to four years of global radiometric measurements at L-band. The mission's objective was to monitor sea surface salinity, but other applications of its data over land and the cryosphere have been developed. For this reason, it is important to have accurate calibration over the full range of antenna temperatures from natural targets. It is also needed in order to combine Aquarius measurements with other L-band sensors. Aquarius calibration is strongly focused on the ocean. We present a research product which is part of the final release and aims at producing an accurate calibration from the low end (celestial sky) to the high end (land and ice) of the brightness temperature scale. We calibrate the Aquarius radiometers using measurements over the Sky and oceans and assess the new calibration using measurements over land.

Soil Moisture Active Passive (SMAP) mission and the Soil Moisture and Ocean Salinity (SMOS) missions provide brightness temperature and soil moisture estimates every 2–3 days. SMAP brightness temperature observations were compared with SMOS observations at 40° incidence angle. The brightness temperatures from the two missions are not consistent. SMAP observations show a warmer TB bias (about 1.27 K: V pol and 0.62 K: H pol) as compared to SMOS. SMAP and SMOS missions use different retrieval algorithms and ancillary datasets which result in further inconsistencies between their soil moisture products. The reprocessed constant-angle SMOS brightness temperatures were used in the SMAP soil moisture retrieval algorithm to develop a consistent multi-satellite product. The integrated product has an increased global revisit frequency (1 day) and period of record that is unattainable by either one of the satellites alone. Results from the development and validation of the integrated soil moisture product will be presented.

This paper describes the first results of a field experiment conducted at the Selhausen remote sensing field laboratory (Germany) over the entire growing season of a winter wheat. Brightness temperature measurements were performed with the passive microwave L-band radiometer ELBARA-II. The data were collected above two different footprints within a homogeneous winter wheat stand in order to disentangle between the radiation originating from the soil and the radiation originating from the vegetation. In a first step, the brightness temperature $(T_{\mathrm{B}})$ data collected above the first plot with the soil surface covered by a metal grid (i.e., blocking the radiations from the ground) were used to retrieve the vegetation optical depth ( $\tau$ ). In a second step, $T_{\mathrm{B}}$ data collected above the second plot without the metal grid on the soil surface were used to retrieve the soil surface moisture using several inverse modeling approaches. All modeling investigations were performed with the simple zero-order $\tau-\omega$ model. The results show that using $\tau$ data derived from the first plot as a priori information, which showed to be time, polarization, and angle dependent, allows us to improve the soil moisture retrieval, due to a better representation of the vegetation canopy effect on the measured $T_{\mathrm{B}}$ . Furthermore, the correlations between $\tau$ and different vegetation indices were analyzed and highlight the potential of $\tau$ in terms of vegetation monitoring for, e.g., all-weather measurements compared to optical measurements.

This work presents an assessment on the correlation between CyGNSS-derived Global Navigation Satellite Systems Reflectometry (GNSS-R) bistatic reflectivity Γ rl and SMAP-derived brightness temperature T B , over land surfaces. This parametric-study is performed as a function of Soil Moisture Content (SMC), and vegetation opacity τ. Several target areas are selected to evaluate potential differentiated geophysical effects on “active” (as many transmitters as navigation satellites are in view), and passive approaches. Although microwave radiometry has potentially a better sensitivity to SMC, the spatial resolution is poor ~ 40 km. On the other hand, GNSS-R bistatic coherent radar footprint is limited by half of the first Fresnel zone which provides about ~ 150 m of spatial resolution (depending on the geometry). The synergetic combination of both techniques could provide advantages with respect to active monostatic Synthetic Aperture Radar (SAR).

Spaceborne microwave radiometers with high frequency channels (150 – 183 GHz) are important for retrieving many geophysical parameters such as snowfall, ice water path, and atmospheric water vapor profiles. In order to obtain accurate retrievals from the brightness temperature measurements, the radiometers must be properly calibrated. Several methods have been developed to analyze the on-orbit calibration, including comparisons with radiative transfer models, comparisons with radiosonde profiles, and cross-calibration with similar radiometers. This paper introduces a new method to calibrate high frequency channels that utilizes TB histograms. This new method gives an independent approach that can be used by itself to analyze radiometer calibration or in conjunction with other methods to corroborate results.

Since the beginning of its routine science operation in March 2015, the NASA SMAP observatory has been returning interference-mitigated brightness temperature observations at L-band (1.41 GHz) frequency from space. The resulting data enable frequent global mapping of soil moisture with a retrieval uncertainty below 0.040 m 3 /m 3 at a 36 km spatial scale. This paper describes the development and validation of an enhanced version of the current standard soil moisture product. Compared with the standard product that is posted on a 36 km grid, the new enhanced product is posted on a 9 km grid. Derived from the same time-ordered brightness temperature observations that feed the current standard passive soil moisture product, the enhanced passive soil moisture product leverages on the Backus-Gilbert optimal interpolation technique that more fully utilizes the additional information from the original radiometer observations to achieve global mapping of soil moisture with enhanced clarity. The resulting enhanced soil moisture product was assessed using long-term in situ soil moisture observations from core validation sites located in diverse biomes and was found to exhibit an average retrieval uncertainty below 0.040 m 3 /m 3 . As of December 2016, the enhanced soil moisture product has been made available to the public from the NASA Distributed Active Archive Center at the National Snow and Ice Data Center.

The Advanced Microwave Scanning Radiometer 2 (AMSR2) is part of the Global Change Observation Mission-Water (GCOM-W) mission. AMSR2 fills the void left by the loss of the Advanced Microwave Scanning Radiometer-Earth Observing System (AMSR-E) after almost 10 years. Both missions provide brightness temperature observations that are used to retrieve soil moisture. Merging AMSR-E and AMSR2 will help build a consistent long-term dataset. Before tackling the integration of AMSR-E and AMSR2 it is necessary to conduct a thorough validation and assessment of the AMSR2 soil moisture products. This study focuses on validation of the AMSR2 soil moisture products by comparison with in situ reference data from a set of core validation sites. Three products that rely on different algorithms were evaluated; the JAXA Soil Moisture Algorithm (JAXA), the Land Parameter Retrieval Model (LPRM), and the Single Channel Algorithm (SCA). Results indicate that overall the SCA has the best performance based upon the metrics considered.

Soil Moisture Active Passive (SMAP) mission and the ESA Soil Moisture and Ocean Salinity (SMOS) missions provide brightness temperature and soil moisture estimates every 2–3 days. SMAP brightness temperature observations were compared with SMOS observations at 40° incidence angle. The brightness temperatures from the two missions are not consistent and have a bias of about 2.7K over land with respect to each other. SMAP and SMOS missions use different retrieval algorithms and ancillary datasets which result in further inconsistencies between the soil moisture products. The reprocessed constant-angle SMOS brightness temperatures were used in the SMAP soil moisture retrieval algorithm to develop a consistent multi-satellite product. The integrated product will have an increased global revisit frequency (1 day) and period of record that would be unattainable by either one of the satellites alone. Results from the development and validation of the integrated product will be presented.

The Thermal InfraRed Sensor (TIRS), an infrared (IR) radiometer developed at Centro de Astrobiología, is one the sensors that compose the Mars Environmental Dynamics Analyzer (MEDA) onboard NASA?s Mars 2020 mission. It will measure the net thermal infrared radiation, reflected solar radiation at the surface, atmosphere temperature and surface skin brightness temperature using five different channels. The present paper provides a brief description on TIRS design and channels requirements. Then, a detailed presentation of sensor model equations and a sensitivity analysis to model uncertainties are included. Finally, accuracy and resolution calculus for each channel versus operational temperature is presented. The calculus is performed based on sensitivity equations and the estimated values for different uncertainties source

Aquarius is an L-band active/passive sensor designed to globally map sea surface salinity from space [1, 2]. Two instruments, a radar scatterometer and a radiometer, observe the same surface footprint almost simultaneously. The radiometer is the primary instrument for sensing sea surface salinity (SSS), while the scatterometer is included to provide a correction for sea surface roughness, which is a primary source of error in the salinity retrieval. Although the primary objective is the measurement of SSS, the instrument combination operates continuously, acquiring data over land and sea ice as well. An important feature of the data processing includes detection and mitigation of Radio Frequency Interference (RFI), which is done separately for both active and passive instruments. Correcting for RFI is particularly critical over ocean because of the high accuracy required in the brightness temperature measurements for SSS retrieval. It is also necessary for applications of the Aquarius data over land, where man-made interference is widespread, even though less accuracy is required in this case. This paper will provide an overview of the current status of the Aquarius RFI processing and an update on the ongoing work on the improvement of the RFI detection and mitigation performance.

Three L-band radiometers have been observing the Earth in order to retrieve soil moisture and ocean salinity. They use different instrument configurations and calibration and retrieval algorithms. In any case, the brightness temperature retrieved at the Earth surface should be consistent between all instruments. One reason for inconsistency would be the use of different approaches for the instrument calibration or the use of different models to retrieve surface brightness temperature. We report on the different approaches used for the SMOS, SMAP and Aquarius instruments and their impact on the observations consistency.

2015 IEEE International Geoscience and Remote Sensing Symposium (IGARSS 2015), Remote Sensing: Understanding the Earth for a Safer World, 26-31 July 2015, Milan, Italy.-- 4 pages, 6 figures, 1 table.-- © 2015 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The Dome-C region, in the East Antarctic Plateau, has been used for calibration/validation of satellite microwave radiometers since the 1970's. However, its use as an independent external target has been recently questioned due to some spatial inhomogeneities found in L-band airborne and satellite observations. This work evidences the influence of the Antarctic ice thickness spatial variations on the measured SMOS and Aquarius brightness temperatures (TB). The possible effects of subglacial water and bedrock on the acquired radiometric signals have also been analyzed. A 3-months no-daylight period during the Austral winter has been selected. Four transects over East Antarctica have been defined to study the spatial variations. A good agreement between SMOS and Aquarius TB changes and ice thickness variations over the whole Antarctica has been observed, obtaining linear correlations of 0.6-0.7 and slopes of 8.6-9.5 K/km. The subglacial lakes may affect the vertical physical temperature profile and/or the dielectric properties of the ice layers above. As expected, the subglacial bedrock is not contributing to the measured TB, since the maximum estimated L-band penetration depth is ~1-1.5 km

We discuss work at NIST aimed at developing a passive microwave brightness temperature standard. By reducing uncertainty, we can provide better calibrations for future weather and climate-monitoring radiometers. We discuss the calibration procedure used, measured data, and various theoretical and simulated results that have led to an improved understanding of the various uncertainty contributions in the measurement. We overview a Monte Carlo simulation to determine the uncertainty in target brightness temperature as a function of measurement distance and target size. We also discuss other future improvements including an improved blackbody design. The achievable calibration source brightness temperature uncertainty is expected to be reduced from the current 0.7 to 1.0 K from 18 to 65 GHz to less than 0.3 K.