Search

In this paper, an energy flow control strategy to reduce the smart meter privacy leakage is studied. The considered smart grid is equipped with an energy storage device. The privacy leakage is modeled as optimal Bayesian detections on the behaviors of the consumer made by an authorized adversary. To evaluate the privacy risk, a Bayesian detection-operational privacy leakage metric is proposed. The design of an optimal privacy-preserving energy control strategy can be formulated as a belief state MDP problem. Therefore, standard methods and algorithms can be utilized to obtain or to approximate the optimal control strategy. A simplified problem to design an instantaneous optimal privacy-preserving control strategy is also considered. It is shown that the problem of the instantaneous optimal control strategy design can be formulated as a set of linear programmings., QC 20160401

In this paper, an energy flow control strategy to reduce the smart meter privacy leakage is studied. The considered smart grid is equipped with an energy storage device. The privacy leakage is modeled as optimal Bayesian detections on the behaviors of the consumer made by an authorized adversary. To evaluate the privacy risk, a Bayesian detection-operational privacy leakage metric is proposed. The design of an optimal privacy-preserving energy control strategy can be formulated as a belief state MDP problem. Therefore, standard methods and algorithms can be utilized to obtain or to approximate the optimal control strategy. A simplified problem to design an instantaneous optimal privacy-preserving control strategy is also considered. It is shown that the problem of the instantaneous optimal control strategy design can be formulated as a set of linear programmings., QC 20160401

Low-power wireless devices suffer notoriously from Cross- Technology Interference (CTI). To enable co-existence, researchers have proposed a variety of interference mitigation strategies. Existing solutions, however, are designed to work with the limitations of currently available radio chips. In this paper, we investigate how to exploit physical layer properties of 802.15.4 signals to better address CTI. We present CrossZig, a cross-layer solution that takes advantage of physical layer information and processing to improve low-power communication under CTI. To this end, CrossZig utilizes physical layer information to detect presence of CTI in a corrupted packet and to apply an adaptive packet recovery which incorporates a novel cross-layer based packet merging and an adaptive FEC coding. We implement a prototype of CrossZig for the low-power IEEE 802.15.4 in a software-defined radio platform. We show the adaptability and the performance gain of CrossZig through experimental evaluation considering both micro-benchmarking and system performance under various interference patterns. Our results demonstrate that CrossZig can achieve a high accuracy in error localization (94.3% accuracy) and interference type identification (less than 5% error rate for SINR ranges below 3 dB). Moreover, our system shows consistent performance improvements under interference from various interfering technologies., QC 20160408

In this paper, an energy flow control strategy to reduce the smart meter privacy leakage is studied. The considered smart grid is equipped with an energy storage device. The privacy leakage is modeled as optimal Bayesian detections on the behaviors of the consumer made by an authorized adversary. To evaluate the privacy risk, a Bayesian detection-operational privacy leakage metric is proposed. The design of an optimal privacy-preserving energy control strategy can be formulated as a belief state MDP problem. Therefore, standard methods and algorithms can be utilized to obtain or to approximate the optimal control strategy. A simplified problem to design an instantaneous optimal privacy-preserving control strategy is also considered. It is shown that the problem of the instantaneous optimal control strategy design can be formulated as a set of linear programmings., QC 20160401

Low-power wireless devices suffer notoriously from Cross- Technology Interference (CTI). To enable co-existence, researchers have proposed a variety of interference mitigation strategies. Existing solutions, however, are designed to work with the limitations of currently available radio chips. In this paper, we investigate how to exploit physical layer properties of 802.15.4 signals to better address CTI. We present CrossZig, a cross-layer solution that takes advantage of physical layer information and processing to improve low-power communication under CTI. To this end, CrossZig utilizes physical layer information to detect presence of CTI in a corrupted packet and to apply an adaptive packet recovery which incorporates a novel cross-layer based packet merging and an adaptive FEC coding. We implement a prototype of CrossZig for the low-power IEEE 802.15.4 in a software-defined radio platform. We show the adaptability and the performance gain of CrossZig through experimental evaluation considering both micro-benchmarking and system performance under various interference patterns. Our results demonstrate that CrossZig can achieve a high accuracy in error localization (94.3% accuracy) and interference type identification (less than 5% error rate for SINR ranges below 3 dB). Moreover, our system shows consistent performance improvements under interference from various interfering technologies., QC 20160408

In this paper, an energy flow control strategy to reduce the smart meter privacy leakage is studied. The considered smart grid is equipped with an energy storage device. The privacy leakage is modeled as optimal Bayesian detections on the behaviors of the consumer made by an authorized adversary. To evaluate the privacy risk, a Bayesian detection-operational privacy leakage metric is proposed. The design of an optimal privacy-preserving energy control strategy can be formulated as a belief state MDP problem. Therefore, standard methods and algorithms can be utilized to obtain or to approximate the optimal control strategy. A simplified problem to design an instantaneous optimal privacy-preserving control strategy is also considered. It is shown that the problem of the instantaneous optimal control strategy design can be formulated as a set of linear programmings., QC 20160401

Low-power wireless devices suffer notoriously from Cross- Technology Interference (CTI). To enable co-existence, researchers have proposed a variety of interference mitigation strategies. Existing solutions, however, are designed to work with the limitations of currently available radio chips. In this paper, we investigate how to exploit physical layer properties of 802.15.4 signals to better address CTI. We present CrossZig, a cross-layer solution that takes advantage of physical layer information and processing to improve low-power communication under CTI. To this end, CrossZig utilizes physical layer information to detect presence of CTI in a corrupted packet and to apply an adaptive packet recovery which incorporates a novel cross-layer based packet merging and an adaptive FEC coding. We implement a prototype of CrossZig for the low-power IEEE 802.15.4 in a software-defined radio platform. We show the adaptability and the performance gain of CrossZig through experimental evaluation considering both micro-benchmarking and system performance under various interference patterns. Our results demonstrate that CrossZig can achieve a high accuracy in error localization (94.3% accuracy) and interference type identification (less than 5% error rate for SINR ranges below 3 dB). Moreover, our system shows consistent performance improvements under interference from various interfering technologies., QC 20160408

In this paper, an energy flow control strategy to reduce the smart meter privacy leakage is studied. The considered smart grid is equipped with an energy storage device. The privacy leakage is modeled as optimal Bayesian detections on the behaviors of the consumer made by an authorized adversary. To evaluate the privacy risk, a Bayesian detection-operational privacy leakage metric is proposed. The design of an optimal privacy-preserving energy control strategy can be formulated as a belief state MDP problem. Therefore, standard methods and algorithms can be utilized to obtain or to approximate the optimal control strategy. A simplified problem to design an instantaneous optimal privacy-preserving control strategy is also considered. It is shown that the problem of the instantaneous optimal control strategy design can be formulated as a set of linear programmings., QC 20160401

Low-power wireless devices suffer notoriously from Cross- Technology Interference (CTI). To enable co-existence, researchers have proposed a variety of interference mitigation strategies. Existing solutions, however, are designed to work with the limitations of currently available radio chips. In this paper, we investigate how to exploit physical layer properties of 802.15.4 signals to better address CTI. We present CrossZig, a cross-layer solution that takes advantage of physical layer information and processing to improve low-power communication under CTI. To this end, CrossZig utilizes physical layer information to detect presence of CTI in a corrupted packet and to apply an adaptive packet recovery which incorporates a novel cross-layer based packet merging and an adaptive FEC coding. We implement a prototype of CrossZig for the low-power IEEE 802.15.4 in a software-defined radio platform. We show the adaptability and the performance gain of CrossZig through experimental evaluation considering both micro-benchmarking and system performance under various interference patterns. Our results demonstrate that CrossZig can achieve a high accuracy in error localization (94.3% accuracy) and interference type identification (less than 5% error rate for SINR ranges below 3 dB). Moreover, our system shows consistent performance improvements under interference from various interfering technologies., QC 20160408

Low-power wireless devices suffer notoriously from Cross- Technology Interference (CTI). To enable co-existence, researchers have proposed a variety of interference mitigation strategies. Existing solutions, however, are designed to work with the limitations of currently available radio chips. In this paper, we investigate how to exploit physical layer properties of 802.15.4 signals to better address CTI. We present CrossZig, a cross-layer solution that takes advantage of physical layer information and processing to improve low-power communication under CTI. To this end, CrossZig utilizes physical layer information to detect presence of CTI in a corrupted packet and to apply an adaptive packet recovery which incorporates a novel cross-layer based packet merging and an adaptive FEC coding. We implement a prototype of CrossZig for the low-power IEEE 802.15.4 in a software-defined radio platform. We show the adaptability and the performance gain of CrossZig through experimental evaluation considering both micro-benchmarking and system performance under various interference patterns. Our results demonstrate that CrossZig can achieve a high accuracy in error localization (94.3% accuracy) and interference type identification (less than 5% error rate for SINR ranges below 3 dB). Moreover, our system shows consistent performance improvements under interference from various interfering technologies., QC 20160408

This paper considers the capacity limit of an uplink wideband CDMA (WCDMA) system assuming imperfect channel state information at the receiver (CSIR). In order to make the studied results useful for the performance assessment of real cellular networks, various realistic assumptions are included in the problem. A discrete-time channel model is derived based on the mismatched filtering at the receiver. Capacity inner bounds are then characterized based on the discrete-time channel model considering different assumptions on decoding strategy. Numerical results are also provided to show the effect of imperfect CSIR on the capacity., QC 20151211

In this paper, we study the problem of privacy information leakage in a smart grid. The privacy risk is assumed to be caused by an unauthorized binary hypothesis testing of the consumer's behaviour based on the smart meter readings of energy supplies from the energy provider. Another energy supplies are produced by an alternative energy source. A controller equipped with an energy storage device manages the energy inflows to satisfy the energy demand of the consumer. We study the optimal energy control strategy which minimizes the asymptotic exponential decay rate of the minimum Type II error probability in the unauthorized hypothesis testing to suppress the privacy risk. Our study shows that the cardinality of the energy supplies from the energy provider for the optimal control strategy is no more than two. This result implies a simple objective of the optimal energy control strategy. When additional side information is available for the adversary, the optimal control strategy and privacy risk are compared with the case of leaking smart meter readings to the adversary only., QC 20160121

In this paper, we study the problem of privacy information leakage in a smart grid. The privacy risk is assumed to be caused by an unauthorized binary hypothesis testing of the consumer's behaviour based on the smart meter readings of energy supplies from the energy provider. Another energy supplies are produced by an alternative energy source. A controller equipped with an energy storage device manages the energy inflows to satisfy the energy demand of the consumer. We study the optimal energy control strategy which minimizes the asymptotic exponential decay rate of the minimum Type II error probability in the unauthorized hypothesis testing to suppress the privacy risk. Our study shows that the cardinality of the energy supplies from the energy provider for the optimal control strategy is no more than two. This result implies a simple objective of the optimal energy control strategy. When additional side information is available for the adversary, the optimal control strategy and privacy risk are compared with the case of leaking smart meter readings to the adversary only., QC 20160121

In this paper, we study the problem of privacy information leakage in a smart grid. The privacy risk is assumed to be caused by an unauthorized binary hypothesis testing of the consumer's behaviour based on the smart meter readings of energy supplies from the energy provider. Another energy supplies are produced by an alternative energy source. A controller equipped with an energy storage device manages the energy inflows to satisfy the energy demand of the consumer. We study the optimal energy control strategy which minimizes the asymptotic exponential decay rate of the minimum Type II error probability in the unauthorized hypothesis testing to suppress the privacy risk. Our study shows that the cardinality of the energy supplies from the energy provider for the optimal control strategy is no more than two. This result implies a simple objective of the optimal energy control strategy. When additional side information is available for the adversary, the optimal control strategy and privacy risk are compared with the case of leaking smart meter readings to the adversary only., QC 20160121

In this paper, we study the problem of privacy information leakage in a smart grid. The privacy risk is assumed to be caused by an unauthorized binary hypothesis testing of the consumer's behaviour based on the smart meter readings of energy supplies from the energy provider. Another energy supplies are produced by an alternative energy source. A controller equipped with an energy storage device manages the energy inflows to satisfy the energy demand of the consumer. We study the optimal energy control strategy which minimizes the asymptotic exponential decay rate of the minimum Type II error probability in the unauthorized hypothesis testing to suppress the privacy risk. Our study shows that the cardinality of the energy supplies from the energy provider for the optimal control strategy is no more than two. This result implies a simple objective of the optimal energy control strategy. When additional side information is available for the adversary, the optimal control strategy and privacy risk are compared with the case of leaking smart meter readings to the adversary only., QC 20160121

In this paper, we study the problem of privacy information leakage in a smart grid. The privacy risk is assumed to be caused by an unauthorized binary hypothesis testing of the consumer's behaviour based on the smart meter readings of energy supplies from the energy provider. Another energy supplies are produced by an alternative energy source. A controller equipped with an energy storage device manages the energy inflows to satisfy the energy demand of the consumer. We study the optimal energy control strategy which minimizes the asymptotic exponential decay rate of the minimum Type II error probability in the unauthorized hypothesis testing to suppress the privacy risk. Our study shows that the cardinality of the energy supplies from the energy provider for the optimal control strategy is no more than two. This result implies a simple objective of the optimal energy control strategy. When additional side information is available for the adversary, the optimal control strategy and privacy risk are compared with the case of leaking smart meter readings to the adversary only., QC 20160121

In this paper, we study an optimal transmit strategy for multiple-input single-output (MISO) Gaussian channels with joint sum and per-antenna power constraints. We study in detail the interesting case where the sum of the per-antenna power constraints is larger than sum power constraint. A closed-form characterization of an optimal beamforming strategy is derived.It is shown that we can always find an optimal beamforming transmit strategy that allocates the maximal sum power with phases matched to the complex channel coefficients. The main result is a simple recursive algorithm to compute the optimal power allocation. Whenever the optimal power allocation of the corresponding problem with sum power constraint only exceeds per-antenna power constraints, it is optimal to allocate maximal per-antenna power to those antennas to satisfy the per-antenna power constraints. The remaining power is divided amongst the other antennas whose optimal allocation follows from a reduced joint sum and per-antenna power constraints problem of smaller channel coefficient dimension and reduced sum power constraint. Finally, the theoretical results are illustrated by numerical examples., QC 20160607

In this paper, we study an optimal transmit strategy for multiple-input single-output (MISO) Gaussian channels with joint sum and per-antenna power constraints. We study in detail the interesting case where the sum of the per-antenna power constraints is larger than sum power constraint. A closed-form characterization of an optimal beamforming strategy is derived.It is shown that we can always find an optimal beamforming transmit strategy that allocates the maximal sum power with phases matched to the complex channel coefficients. The main result is a simple recursive algorithm to compute the optimal power allocation. Whenever the optimal power allocation of the corresponding problem with sum power constraint only exceeds per-antenna power constraints, it is optimal to allocate maximal per-antenna power to those antennas to satisfy the per-antenna power constraints. The remaining power is divided amongst the other antennas whose optimal allocation follows from a reduced joint sum and per-antenna power constraints problem of smaller channel coefficient dimension and reduced sum power constraint. Finally, the theoretical results are illustrated by numerical examples., QC 20160607

In this paper, we study an optimal transmit strategy for multiple-input single-output (MISO) Gaussian channels with joint sum and per-antenna power constraints. We study in detail the interesting case where the sum of the per-antenna power constraints is larger than sum power constraint. A closed-form characterization of an optimal beamforming strategy is derived.It is shown that we can always find an optimal beamforming transmit strategy that allocates the maximal sum power with phases matched to the complex channel coefficients. The main result is a simple recursive algorithm to compute the optimal power allocation. Whenever the optimal power allocation of the corresponding problem with sum power constraint only exceeds per-antenna power constraints, it is optimal to allocate maximal per-antenna power to those antennas to satisfy the per-antenna power constraints. The remaining power is divided amongst the other antennas whose optimal allocation follows from a reduced joint sum and per-antenna power constraints problem of smaller channel coefficient dimension and reduced sum power constraint. Finally, the theoretical results are illustrated by numerical examples., QC 20160607

In this paper, we study an optimal transmit strategy for multiple-input single-output (MISO) Gaussian channels with joint sum and per-antenna power constraints. We study in detail the interesting case where the sum of the per-antenna power constraints is larger than sum power constraint. A closed-form characterization of an optimal beamforming strategy is derived.It is shown that we can always find an optimal beamforming transmit strategy that allocates the maximal sum power with phases matched to the complex channel coefficients. The main result is a simple recursive algorithm to compute the optimal power allocation. Whenever the optimal power allocation of the corresponding problem with sum power constraint only exceeds per-antenna power constraints, it is optimal to allocate maximal per-antenna power to those antennas to satisfy the per-antenna power constraints. The remaining power is divided amongst the other antennas whose optimal allocation follows from a reduced joint sum and per-antenna power constraints problem of smaller channel coefficient dimension and reduced sum power constraint. Finally, the theoretical results are illustrated by numerical examples., QC 20160607

In this paper, we study an optimal transmit strategy for multiple-input single-output (MISO) Gaussian channels with joint sum and per-antenna power constraints. We study in detail the interesting case where the sum of the per-antenna power constraints is larger than sum power constraint. A closed-form characterization of an optimal beamforming strategy is derived.It is shown that we can always find an optimal beamforming transmit strategy that allocates the maximal sum power with phases matched to the complex channel coefficients. The main result is a simple recursive algorithm to compute the optimal power allocation. Whenever the optimal power allocation of the corresponding problem with sum power constraint only exceeds per-antenna power constraints, it is optimal to allocate maximal per-antenna power to those antennas to satisfy the per-antenna power constraints. The remaining power is divided amongst the other antennas whose optimal allocation follows from a reduced joint sum and per-antenna power constraints problem of smaller channel coefficient dimension and reduced sum power constraint. Finally, the theoretical results are illustrated by numerical examples., QC 20160607

The recent development of low cost wireless sensors enables novel internet-of-things (IoT) applications, such as the monitoring of water distribution networks. In such scenarios, the lifetime of the wireless sensor network (WSN) is a major concern, given that sensor node replacement is generally inconvenient and costly. In this paper, a compressive sensing-based scheduling scheme is proposed that conserves energy by activating only a small subset of sensor nodes in each timeslot to sense and transmit. Compressive sensing introduces a cardinality constraint that makes the scheduling optimization problem particularly challenging. Taking advantage of the network topology imposed by the IoT water monitoring scenario, the scheduling problem is decomposed into simpler subproblems, and a dynamic-programming-based solution method is proposed. Based on the proposed method, a solution algorithm is derived, whose complexity and energy-wise performance are investigated. The complexity of the proposed algorithm is characterized and its performance is evaluated numerically via an IoT emulator of water distribution networks. The analytical and numerical results show that the proposed algorithm outperforms state-of-the-art approaches in terms of energy consumption, network lifetime, and robustness to sensor node failures. It is argued that the derived solution approach is general and it can be potentially applied to more IoT scenarios such as WSN scheduling in smart cities and intelligent transport systems., QC 20151215

The recent development of low cost wireless sensors enables novel internet-of-things (IoT) applications, such as the monitoring of water distribution networks. In such scenarios, the lifetime of the wireless sensor network (WSN) is a major concern, given that sensor node replacement is generally inconvenient and costly. In this paper, a compressive sensing-based scheduling scheme is proposed that conserves energy by activating only a small subset of sensor nodes in each timeslot to sense and transmit. Compressive sensing introduces a cardinality constraint that makes the scheduling optimization problem particularly challenging. Taking advantage of the network topology imposed by the IoT water monitoring scenario, the scheduling problem is decomposed into simpler subproblems, and a dynamic-programming-based solution method is proposed. Based on the proposed method, a solution algorithm is derived, whose complexity and energy-wise performance are investigated. The complexity of the proposed algorithm is characterized and its performance is evaluated numerically via an IoT emulator of water distribution networks. The analytical and numerical results show that the proposed algorithm outperforms state-of-the-art approaches in terms of energy consumption, network lifetime, and robustness to sensor node failures. It is argued that the derived solution approach is general and it can be potentially applied to more IoT scenarios such as WSN scheduling in smart cities and intelligent transport systems., QC 20151215

The recent development of low cost wireless sensors enables novel internet-of-things (IoT) applications, such as the monitoring of water distribution networks. In such scenarios, the lifetime of the wireless sensor network (WSN) is a major concern, given that sensor node replacement is generally inconvenient and costly. In this paper, a compressive sensing-based scheduling scheme is proposed that conserves energy by activating only a small subset of sensor nodes in each timeslot to sense and transmit. Compressive sensing introduces a cardinality constraint that makes the scheduling optimization problem particularly challenging. Taking advantage of the network topology imposed by the IoT water monitoring scenario, the scheduling problem is decomposed into simpler subproblems, and a dynamic-programming-based solution method is proposed. Based on the proposed method, a solution algorithm is derived, whose complexity and energy-wise performance are investigated. The complexity of the proposed algorithm is characterized and its performance is evaluated numerically via an IoT emulator of water distribution networks. The analytical and numerical results show that the proposed algorithm outperforms state-of-the-art approaches in terms of energy consumption, network lifetime, and robustness to sensor node failures. It is argued that the derived solution approach is general and it can be potentially applied to more IoT scenarios such as WSN scheduling in smart cities and intelligent transport systems., QC 20151215

In this paper, we investigate the performance of a wireless relay network with multiple transmission sessions, in which multiple groups of source nodes communicate with their respective destination nodes via a shared wireless relay network. A multiple transmission session model with network code division multiplexing (NCDM) scheme is proposed to remove the intersession interference at each destination. The fundamental idea of the NCDM scheme takes advantage of the property of G circle dot H-T = 0 of the low-density generator matrix (LDGM) codes. Based on the analysis of the NCDM scheme, we investigate the relationship among the equivalent received signal vector, the number of sessions and the column weight of the generator matrix. New code design criteria for the construction of the generator matrix is proposed. We further evaluate the multiple transmission session model with the proposed NCDM scheme in terms of throughput and complexity. Our evaluation demonstrates that the proposed scheme not only has a linear computational complexity, but also shows a similar error performance in the AWGN case and a considerable throughput improvement compared with its counterpart, which is referred to as a serial session scheme, where groups of source nodes communicate with their respective destinations in a time division manner., QC 20151216

The recent development of low cost wireless sensors enables novel internet-of-things (IoT) applications, such as the monitoring of water distribution networks. In such scenarios, the lifetime of the wireless sensor network (WSN) is a major concern, given that sensor node replacement is generally inconvenient and costly. In this paper, a compressive sensing-based scheduling scheme is proposed that conserves energy by activating only a small subset of sensor nodes in each timeslot to sense and transmit. Compressive sensing introduces a cardinality constraint that makes the scheduling optimization problem particularly challenging. Taking advantage of the network topology imposed by the IoT water monitoring scenario, the scheduling problem is decomposed into simpler subproblems, and a dynamic-programming-based solution method is proposed. Based on the proposed method, a solution algorithm is derived, whose complexity and energy-wise performance are investigated. The complexity of the proposed algorithm is characterized and its performance is evaluated numerically via an IoT emulator of water distribution networks. The analytical and numerical results show that the proposed algorithm outperforms state-of-the-art approaches in terms of energy consumption, network lifetime, and robustness to sensor node failures. It is argued that the derived solution approach is general and it can be potentially applied to more IoT scenarios such as WSN scheduling in smart cities and intelligent transport systems., QC 20151215

The recent development of low cost wireless sensors enables novel internet-of-things (IoT) applications, such as the monitoring of water distribution networks. In such scenarios, the lifetime of the wireless sensor network (WSN) is a major concern, given that sensor node replacement is generally inconvenient and costly. In this paper, a compressive sensing-based scheduling scheme is proposed that conserves energy by activating only a small subset of sensor nodes in each timeslot to sense and transmit. Compressive sensing introduces a cardinality constraint that makes the scheduling optimization problem particularly challenging. Taking advantage of the network topology imposed by the IoT water monitoring scenario, the scheduling problem is decomposed into simpler subproblems, and a dynamic-programming-based solution method is proposed. Based on the proposed method, a solution algorithm is derived, whose complexity and energy-wise performance are investigated. The complexity of the proposed algorithm is characterized and its performance is evaluated numerically via an IoT emulator of water distribution networks. The analytical and numerical results show that the proposed algorithm outperforms state-of-the-art approaches in terms of energy consumption, network lifetime, and robustness to sensor node failures. It is argued that the derived solution approach is general and it can be potentially applied to more IoT scenarios such as WSN scheduling in smart cities and intelligent transport systems., QC 20151215

We consider downlink transmission in multi-cell wireless networks where in each cell one base station is serving multiple mobile terminals. There is no a priori channel state information (CSI) available at base stations and mobile terminals. We propose a low-complexity pilot-assisted opportunistic user scheduling (PAOUS) scheme. The proposed scheme operates in four subsequent phases: channel training; feedback transmission; user scheduling; and data transmission. We deploy an orthogonal pilot-assisted channel training scheme for acquiring CST at mobile terminals. Consequently, each mobile terminal obtains a noisy estimation of the corresponding local CST (i.e. channel gains from base stations to the mobile terminal). Then, it makes a local decision based on the estimated channel gains of the interfering links (i.e. the links between base stations in neighboring cells and the mobile terminal) and sends a one-bit feedback signal to the base station of the corresponding cell. Each base station schedules one mobile terminal for communication. We compute the achievable rate region and the achievable degrees of freedom (DoF) of the proposed transmission scheme. Our results show that in a multi-cell network with K base stations and coherence time T, the total DoF K-opt (1 - K-opt/T) is achievable given that the number of mobile terminals in each cell scales proportional to signal-to-noise-ratio. Since limited radio resources are available, only a subset of base stations should be activated, where the optimum number of active base stations is K-opt = min {K, T/2}. This recommends that in large networks (K > T/2), select only a subset of the base stations to be active and perform the PAOUS scheme within the cells associated to these base stations. Our results reveal that, even with single antenna at base stations and no a priori CSI at terminals, a non-trivial DoF gain can be achieved. We also investigate the power allocation between channel training and data transmission, QC 20160923

In this work, we address the problem of channel estimation and precoding / combining for the so-called hybrid millimeter wave (mmWave) MIMO architecture. Our proposed channel estimation scheme exploits channel reciprocity in TDD MIMO systems, by using echoing, thereby allowing us to implement Krylov subspace methods in a fully distributed way. The latter results in estimating the right (resp. left) singular subspace of the channel at the transmitter (resp. receiver). Moreover, we also tackle the problem of subspace decomposition whereby the estimated right (resp. left) singular subspaces are approximated by a cascade of analog and digital precoder (resp. combiner), using an iterative method. Finally we compare our scheme with an equivalent fully digital case and conclude that a relatively similar performance can be achieved, however, with a drastically reduced number of RF chains - 4 ~ 8 times less (i.e., massive savings in cost and power consumption)., QC 20151217

In this work, we address the problem of channel estimation and precoding / combining for the so-called hybrid millimeter wave (mmWave) MIMO architecture. Our proposed channel estimation scheme exploits channel reciprocity in TDD MIMO systems, by using echoing, thereby allowing us to implement Krylov subspace methods in a fully distributed way. The latter results in estimating the right (resp. left) singular subspace of the channel at the transmitter (resp. receiver). Moreover, we also tackle the problem of subspace decomposition whereby the estimated right (resp. left) singular subspaces are approximated by a cascade of analog and digital precoder (resp. combiner), using an iterative method. Finally we compare our scheme with an equivalent fully digital case and conclude that a relatively similar performance can be achieved, however, with a drastically reduced number of RF chains - 4 ~ 8 times less (i.e., massive savings in cost and power consumption)., QC 20151217

In this work, we address the problem of channel estimation and precoding / combining for the so-called hybrid millimeter wave (mmWave) MIMO architecture. Our proposed channel estimation scheme exploits channel reciprocity in TDD MIMO systems, by using echoing, thereby allowing us to implement Krylov subspace methods in a fully distributed way. The latter results in estimating the right (resp. left) singular subspace of the channel at the transmitter (resp. receiver). Moreover, we also tackle the problem of subspace decomposition whereby the estimated right (resp. left) singular subspaces are approximated by a cascade of analog and digital precoder (resp. combiner), using an iterative method. Finally we compare our scheme with an equivalent fully digital case and conclude that a relatively similar performance can be achieved, however, with a drastically reduced number of RF chains - 4 ~ 8 times less (i.e., massive savings in cost and power consumption)., QC 20151217

In this work, we address the problem of channel estimation and precoding / combining for the so-called hybrid millimeter wave (mmWave) MIMO architecture. Our proposed channel estimation scheme exploits channel reciprocity in TDD MIMO systems, by using echoing, thereby allowing us to implement Krylov subspace methods in a fully distributed way. The latter results in estimating the right (resp. left) singular subspace of the channel at the transmitter (resp. receiver). Moreover, we also tackle the problem of subspace decomposition whereby the estimated right (resp. left) singular subspaces are approximated by a cascade of analog and digital precoder (resp. combiner), using an iterative method. Finally we compare our scheme with an equivalent fully digital case and conclude that a relatively similar performance can be achieved, however, with a drastically reduced number of RF chains - 4 ~ 8 times less (i.e., massive savings in cost and power consumption)., QC 20151217

In this work, we address the problem of channel estimation and precoding / combining for the so-called hybrid millimeter wave (mmWave) MIMO architecture. Our proposed channel estimation scheme exploits channel reciprocity in TDD MIMO systems, by using echoing, thereby allowing us to implement Krylov subspace methods in a fully distributed way. The latter results in estimating the right (resp. left) singular subspace of the channel at the transmitter (resp. receiver). Moreover, we also tackle the problem of subspace decomposition whereby the estimated right (resp. left) singular subspaces are approximated by a cascade of analog and digital precoder (resp. combiner), using an iterative method. Finally we compare our scheme with an equivalent fully digital case and conclude that a relatively similar performance can be achieved, however, with a drastically reduced number of RF chains - 4 ~ 8 times less (i.e., massive savings in cost and power consumption)., QC 20151217