Search

[Display omitted] • Pyrolysis technology can be successfully applied into RDF conversion. • Heating value of pyrolytic gas was estimated at the level about 24 MJ/m3. • Residence time significantly influences the pyrolytic gas composition. • Computer simulations predicted the chemical composition of pyrolytic gas. The current COVID-19 pandemic situation and the associated restrictions have increased the amount of generated waste. It results from the necessity to wear personal protective equipment. Thus, the disposal of masks and gloves is a topical issue and requires immediate investigation. The main aims of this work are management and environmental studies of municipal solid wastes (MSW), which have been generated during the COVID-19 pandemic time. Effective waste management in relation to a circular economy is presented. A sample of refuse derived fuel (RDF) with a high content of plastics was used for the experimental and calculation studies. Pyrolysis was selected as the best thermal decomposition process for this kind of wastes. Proximate and ultimate analyses were performed for RDF and its products. Pyrolysis was carried out using a pilot-scale reactor with a continuous flow of 250 kg/h at 900 °C. Thermogravimetric analysis was applied during the pyrolysis investigation and showed that the main decomposition of RDF took place in the temperature range of 250–500 °C. The pyrolysis gas contained combustible compounds like CO (19.8%), H 2 (13.2%), CH 4 (18.9%) and C 2 H 4 (7.1%), giving a high calorific value – 24.4 MJ/m3. The experimental results were implemented for numerical calculations. Chemkin-Pro software was applied to predict the chemical composition of the pyrolysis gas. The performed computer simulations demonstrated very good agreement with the results obtained during the experiments. They also indicated that there is a strong relationship between the chemical composition of the pyrolysis gas, the process temperature and residence time in the reactor. [ABSTRACT FROM AUTHOR]

The article presents the results of RDF (Refuse Derived Fuel) examination in order to use it for energy purpose. RDF material was subjected to thermogravimetric analysis. The TGA analysis confirmed the multi-component nature of tested material. It also indicated that the mixture consists of a minimum of 2 types of materials: biomass and thermoplastic polymers. The pyrolysis was conducted as a batch process with the use of a processing furnace supplied by the IZO Company. RDF sample was pyrolysed under 900 °C in a nitrogen atmosphere. Obtained char and gaseous sample, as well as raw material, were subjected to elemental and gas chromatographic analysis. Furthermore, using ANSYS CHEMKIN-PRO software, numerical simulations of these samples were conducted. Based on the results of composition of pyrolysis gas, the numerical model was validated. Next, modelling of chemical composition of gas from RDF pyrolysis for a pilot installation working in Poland was performed. In addition, the evaluation of the investment costs for the exemplary installation for the thermal conversion of RDF using pyrolysis was made. For this purpose, dynamic methods of investment project assessment were used, which take into account the distribution of anticipated revenues and expenses related to a given investment project over time. • Refuse Derived Fuel (RDF) can be a valuable energy source. • Thermal conversion of RDF by pyrolysis can contribute to limiting waste landfilling. • Calculations with the use of the ANSYS CHEMKIN-PRO software were conducted. • Economic analysis confirmed the legitimacy of the analysed investment. [ABSTRACT FROM AUTHOR]

There can be observed global interest in waste pyrolysis technology due to low costs and availability of raw materials. At the same time, there is a literature gap in forecasting environmental effects of thermal waste treatment installations. In the article was modelled the chemical composition of pyrolysis gas with main focus on the problem in terms of environmental hazards. Not only RDF fuel was analysed, but also selected waste fractions included in its composition. This approach provided comprehensive knowledge about the chemical composition of gaseous pyrolysis products, which is important from the point of view of the heterogeneity of RDF fuel. The main goal of this article was to focus on the utilitarian aspect of the obtained calculation results. Final results can be the basis for estimating ecological effects, both for existing and newly designed installations. Pyrolysis process was modelled using Ansys Chemkin-Pro software. The investigation of the process were carried out for five different temperatures (700, 750, 800, 850 and 900 °C). As an output the mole fraction of H 2 , H 2 O, CH 4 , C 2 H 2 ,C 2 H 4 , C 3 H 6 , C 3 H 8 , CO, CO 2 , HCl and H 2 S were presented. Additionally the reaction pathways for selected material were presented. Based on obtained results, it was established that the residence time did not influenced on the concentration of products, contrary to temperature. The chemical composition of pyrolytic gas is closely related to wastes origin. The application of Chemkin-Pro allowed the calculation of formation for each products at different temperatures and formulation of hypotheses on the reaction pathways involved during pyrolysis process. Further, based on the obtained results confirmed the possibilities of using pyrolysis gas from RDF as a substitute for natural gas in energy consumption sectors. Optimization of the process can be conducted with low financial outlays and reliable results by using calculation tools. Moreover it can be predicted negative impact of obtained products on the future installation. [ABSTRACT FROM AUTHOR]