Search

We have experimentally demonstrated an ultra-high sensitivity gold-based fiber refractive index (RI) sensor whose main structure is composed of multimode fiber (MMF) and photonic crystal fiber (PCF). The gold film is deposited on V-shaped PCF by magnetron sputtering, and sensing experiments are performed based on the principle of surface plasmon resonance (SPR). Numerical simulation results indicate that the cladding mode of the V-shaped PCF is more capable of stimulating the SPR effect than the core mode. The experimental results show that the RI measurement range of the sensor is 1.333–1.421, with a maximum sensitivity of 10015 nm/RIU. In addition to RI sensing, sensing probes can be coated with polydimethylsiloxane (PDMS) on a gold film for temperature sensing. For temperature detection, the range is from 10 to 100 °C and the maximum sensitivity is 3.5 nm/℃. Besides high sensitivity in RI measurement, the proposed sensor also has good sensing performance in temperature sensing. With the advantages of high sensitivity, good stability, and easy preparation, this sensor has become an important reference in the field of high-performance sensing. • This work proposes a refractive index sensor with ultra-high sensitivity, with a maximum sensitivity of 10015 nm/RIU. • The sensor uses PCF with a large cladding area as the substrate and is easy to prepare. • The sensor selects a stable gold film, which is not easily oxidized, as the plasma material. • The maximum sensitivity of this sensor used in the field of temperature sensing is 3.5 nm/°C. [ABSTRACT FROM AUTHOR]

• Metal oxides with high RI will improve the sensing performance of fiber sensors. • Compared to silver-based sensors, the maximum sensitivity of TiO 2 composite film sensors has increased by 16.92 %. • Compared to silver-based sensors, the maximum sensitivity of ZnO composite film sensors has increased by 4.62 %. • The maximum temperature sensitivity of the two composite membrane sensors is 4.9 nm/℃ and 4.3 nm/℃, respectively. With the widespread application of fiber surface plasmon resonance (SPR) sensors in the field of biochemical sensing, especially in the detection of large molecules such as proteins, the sensitivity of traditional fiber SPR sensors has made it difficult to meet the requirements of detection accuracy in practical applications. This article proposes and proves an effective method for selecting the optimal metal oxide material to improve the sensing performance of SPR sensors. Metal oxides (TiO 2 and ZnO) can improve the sensitivity by enhancing the evanescent field of fiber SPR phenomenon. Through simulation, it was found that when the metal oxide film of the composite film sensor maintains the same thickness, the metal oxide with a high effective refractive index (RI) has a better improvement effect on the sensitivity of the SPR sensor. Experimental results show that the maximum RI sensitivity of TiO 2 composite film sensors and ZnO composite film sensors in the RI range of 1.333–1.420 is 15,200 nm/RIU and 13,600 nm/RIU, respectively. Compared to silver-based sensors, RI sensitivity has increased by 16.92 % and 4.62 %, respectively. To further verify the enhancement effect of different metal oxides on fiber sensors, another layer of PDMS film is deposited on TiO 2 and ZnO films. Within the temperature sensing range, the maximum temperature sensitivity of these two composite film temperature sensors is 4.9 nm/°C and 4.3 nm/°C, respectively. Overall, metal oxides with high RI can improve the sensing performance of fiber optic sensors. [ABSTRACT FROM AUTHOR]

• A broadband dual-parameter sensor is proposed and demonstrated. • The sensor cascaded gold film and silver film, which made the range of parameters to be measured larger. • The two detection channels are independent of each other and do not affect each other. • The sensor is simple in structure and easy to prepare. Dual-parameter sensor has relatively small detection range because of restriction on resonance wavelength range. To overcome this problem, we propose a cascaded gold and silver SPR dual-parameter sensor. As the resonance wavelength ranges of gold and silver are different, cascading the two metals to make one sensor broadens the resonance wavelength range, thus increasing the sensor's detection range. The sensor uses no-core fiber as the probe and multimode fiber (MMF) as the input (output) coupler, which constitutes an MMF-NCF-MMF sensing structure. By using Magnetron sputtering, gold and silver are deposited on the outer surface of NCF. The effects of coating time and NCF length on the sensing performance were experimentally investigated to determine the optimal coating time and NCF length. The experimental results shows that the two channels of the sensor are independent of each other without crosstalk and have an extensive range of parameters to be measured. The maximum sensitivity is 3231 nm/RIU in the RI range of 1.333–1.385. It has a maximum temperature sensitivity of 6.68 nm/°C from 0 to 80 °C. In addition, the sensor has good stability and repeatability. The proposed sensor has a simple and integrated structure and is suitable for applications requiring large detection range sensing. [ABSTRACT FROM AUTHOR]

• A compact dual-channel sensor is proposed and demonstrated. • The sensor can detect temperature and refractive index simultaneously. • The two detection channels are independent and do not interfere with each other. • The sensor structure is simple and easy to prepare. To improve the integration of sensors and meet the trend of miniaturization of devices, we propose and demonstrate a compact dual-channel surface plasmon resonance (SPR) fiber sensor for detecting refractive index (RI) and temperature. In this sensor, we chose the simplest structure of optical fiber: no-core fiber (NCF), as the sensing probe. Then the silver film was deposited on the NCF surface using magnetron sputtering to excite the SPR effect. Two sensing channels were constructed on the NCF, one channel deposited with silver film for RI detection, and another channel deposited with PDMS and silver film for temperature detection. Such a construction makes the sensor compact and small. The performance of the proposed sensor is studied theoretically and experimentally. The experiment shows that the maximum sensitivity of the sensor is 3039 nm/RIU and 3.53 nm/°C when the RI ranges from 1.333 to 1.375 and the temperature ranges from 0 °C to 70 °C, respectively. The significant advantage of our proposed sensor is its simple, compact, and easy-to-prepare structure, which opens up a new direction for device miniaturization. [ABSTRACT FROM AUTHOR]