Search

Electric-Steam Integrated Energy Systems (ES-IES) have garnered considerable attention in industrial applications due to their high energy utilization efficiency and energy density. Nonetheless, the limited thermal storage capacity of the steam system impacts the stability of ES-IES, posing a challenge for its implementation in scenarios with a high proportion of renewable energy sources. To address this limitation, this study demonstrates how the integration of a Steam Accumulator (SA) can enhance the stability of ES-IES through a dynamic simulation-based approach. Firstly, a novel method for simulating the steam system is introduced. This method utilizes a resolution-adaptive strategy based on the central implicit difference format to balance simulation accuracy and speed. Furthermore, a simulation framework for ES-IES is delineated, detailing the solution order of subsystems and system coupling interface parameter interaction method. Meanwhile, a comprehensive model and solution for the SA are proposed, aligning well with the aforementioned ES-IES simulation methods in terms of accuracy and complexity. Finally, case study demonstrated that equipping SA in ES-IES can effectively reduce its fault-recovery time by 57.9%, highlighting the efficacy of SA in promoting system stability and security. • A steam accumulator dynamic model and solution. • A novel steam system dynamic simulation approach. • An ES-IES simulation framework. • Fault-state ES-IES operation stability improvement. [ABSTRACT FROM AUTHOR]

Due to their non-deterministic behaviour, renewable energies are defined as non-dispatchable energies and are largely coupled with energy storage systems to overcome the problem of matching energy production and demand. Hence, in the energy efficiency and conservation field there is growing interest towards energy storage systems, especially when combined with the demand side management (DSM) concept, representing DSM the possibility of shaping end user electricity consumption. In this work an existing installation of a thermal energy storage (TES) system coupled with heat pumps in an industrial building is presented and a dynamic simulation model is built to represent its behaviour. Simulations are performed to show the load shifting potential of such storage and costs and energy use are assessed for different configurations, in order to evaluate the viability of this TES application. In particular the demand side strategy considered is aimed at shifting energy demand for cooling to weekend daytime to recover surplus PV electricity or otherwise to off peak hours to profit from lower electricity tariffs. It is found that the use of TES implies increased energy demand, while costs can decrease when electricity tariffs with a considerable difference between on peak and off peak rates are applied. Furthermore the integration with renewable sources for electricity production, such as PV panels, makes the installation of TES economically interesting independently of the electricity tariff in place. However the more relevant aspect for the overall economic feasibility of such installation is the initial capital investment. [ABSTRACT FROM AUTHOR]

The transition from fossil fuels to green renewable resources presents a key challenge: most renewables are intermittent and unpredictable in their nature. Energy storage has the potential to meet this challenge and enables large scale implementation of renewables. In this paper we investigated the dynamic performance of a specific Adiabatic Compressed Air Energy Storage (A-CAES) plant with packed bed thermal energy storage (TES). We developed for the first time a plant model that blends together algebraic and differential sub-models detailing the transient features of the thermal storage, the cavern, and the compression/expansion stages. The model allows us to link the performance of the components, in particular those of the thermal storage system, with the performance of the whole A-CAES plant. Our results indicate that an A-CAES efficiency in the range 60–70% is achievable when the TES system operates with a storage efficiency above 90%. Moreover, we show how the TES dynamic behaviour induces off-design conditions in the other components of the A-CAES plant. Such device-to-plant link of performance is crucial: only through integration of TES model in the whole A-CAES model is possible to assess the benefits and added value of thermal energy storage. To the authors’ knowledge the present study is the first of this kind for an A-CAES plant. [ABSTRACT FROM AUTHOR]

As a result of the increased penetration of intermittent renewable energy sources, Combined Heat and Power (CHP) units are being looked upon as one of the sources that might provide for the ever growing need for electrical flexibility. However, CHP units are often considered as must-run units on the grid for their main purpose is generally to cover the heat demand of an adjoining District Heating Network (DHN). This paper demonstrates how a CHP–DHN system may be used as a frequency reserve without excessively compromising the lifetime of the CHP, using either a specific storage tank or the DHN's thermal inertia in order to compensate for the resulting heat imbalance. In the latter case, it is shown that a buffer tank, although smaller than a specific Thermal Energy Storage (TES), is required due to restrictions for acceptable DHN temperature gradients. In both approaches, the size of the tank has been mapped out considering frequency reserve's duration and capacity. The results show that a simplistic static model of the DHN is sufficient for the design of a specific TES, while a detailed dynamic simulation is required when the DHN is used as storage, to prevent overestimating the flexibility of the CHP–DHN system. This research could be used to assess the potential for improving CHP–DHN systems flexibility, using them as frequency reserves, and to design the required storage or buffer tanks. • A control strategy to use a CHP-DHN system as a frequency reserve is proposed. • Dedicated storage tanks and/or DHN thermal inertia are used. • The DHN can be used as heat storage, but a buffer tank is required. • A detailed dynamic DHN model is needed to determine the DHN flexibility. • The flexibility of the CHP–DHN system was determined for 370 MW CHP. [ABSTRACT FROM AUTHOR]

[Display omitted] • Thermochemical heat storage using Ca(OH) 2 /CaO in a fluidized bed reactor was modeled. • Variable renewable energy fluctuation can be absorbed by using steam as fluidizing gas. • The energy efficiencies for nitrogen were higher than that for steam. • The simulated data agreed with the experimental data, albeit not perfectly. A simplified dynamic model of a Ca(OH) 2 /CaO–containing fluidized bed reactor was developed by combining a continuously stirred tank reactor model in the solid phase with a series of continuously stirred tank reactors in the gas phase for mass transport. The heat supplied to the thermochemical heat storage system was allowed to fluctuate to evaluate the absorption of variable renewable energy fluctuation. In addition, the performance of the fluidized bed was assessed using nitrogen or steam as the fluidizing gas. For nitrogen, the fluctuation of bed temperature increased with the increasing time step of heat change. The bed temperature was affected by the magnitude of the fluctuation of the supplied heat more strongly for nitrogen than for steam, mainly because the rate of dehydration under these conditions was more strongly dependent on temperature than in the case of steam. The thermochemical heat storage efficiency (calculated by considering reaction heat) and energy storage efficiency (calculated by considering reaction heat and sensible heat) equaled 14.1% and 34.1% for steam and 29.9% and 62.7% for nitrogen, respectively. The differences between the efficiencies for steam and nitrogen were ascribed to the latent heat of H 2 O. Sensitivity analysis showed that both efficiencies increased with increasing heat supply because of the concomitant decrease in the time required to heat the system to the reaction temperature. During this time, thermochemical heat storage did not occur, which resulted in lower efficiency. Therefore, the fluctuation from variable renewable energy can be absorbed by using thermochemical heat storage. [ABSTRACT FROM AUTHOR]